Used Vulcanizing presses for sale (4)

Condition: new, Year of construction: 2019, machine/vehicle number: DF0303, pressure:160 t distance between columns:700 mm stroke:400 mm Return Capacity:16 t Engine Output:15 kW Travel:400 mm :600 mm Ram plate:700 x 600 mm table height over floor:850 mm Table size:700 x 600 mm speed of forward flow:10 mm/sec Pressing speed:10 mm/sec :10 mm/sec Guedpjfxyh Refx Aaceh Oil cooling (electric):1,5 kW (max) Oil Tank Capacity:300 l weight of the machine ca.:4,2 t dimensions:950 x 2440 x 2400 m ejector:30 x 30 mm ejector stroke:150 mm pressure of ejector:15 t ejector speed:25 mm/sec no. of ejector pins:1 Stück heating plates :550 x 500 mm :6800 ? :2400 ? :1200 ? :1200 ?

Year of construction: 1969, condition: good (used), Pneumatic gluing press, pressure max. 10 bar, gluing bar with heating, gluing surface 550 x 40 mm stepless temperature adjustment for the lower and upper gluing bar from 0 - 300 degrees C, stepless adjustment of the gluing time, drive power: 5 Kw, 380 Volt-50 Hz, Gujded Dxqbjpfx Aacoh two-hand operation SIEMENS. Pressure build-up via articulated lever, max. opening travel approx.30 mm

Condition: refurbished (used), Year of construction: 1999, operating hours: 2,600 h, functionality: fully functional, total width: 2,200 mm, total length: 1,100 mm, total height: 3,400 mm, overall weight: 8,800 kg, operating pressure: 200 bar, construction height: 3,400 mm, clamping force: 5,500 kN, table length: 850 mm, table width: 1,100 mm, working height: 800 mm, Hydraulic press, generally overhualed hydraulic and electric, 550 T closing pressure, Gusdpfx Asuy Rczsacoh 2 closing speeds: Rapid and working speed Single piston 850*1100 table with T slots Max opening 800 mm Siemens PLC automation with installed Temp. controllers. Possible usage in rubber vulcanization, duroplast pressing, metal forming etc.

Condition: as good as new (ex-display), Year of construction: 2021, functionality: fully functional, machine/vehicle number: W202001, Equipment: documentation/manual, Hydraulic press for versatile use as an assembly press, small series press, manual insertion press or heating press in double column press design (H-press) The press can be inspected at the Ennepetal warehouse. It is a 2.5 year old, unused press without operating hours, which is sold with full warranty. List price: 45.000 € for a special price of 28.000 € Technical details: Robust machine frame Capacity: 30 tons - at 300 bar Pump ASC: 28.5 liters/min. Engine: 11 kW - 15 hp Oil tank: 600 × 450 × 500 mm - with approx. 100 liters Cylinder piston: Ø 110 mm Cylinder inside: Ø 70 mm Stroke: 500 mm Forward speed: 45 mm/s Return speed: 55 mm/s Guides: Ø 50 mm Table top: 800 × 550 mm - with T-slots Plunger plate: 700 × 500 mm - with T-slots Total weight: 2000 kg Valves from BoschRexroth Control cabinet technology from renowned manufacturers Table size of the press table 700 × 500 × 70 mm Table height 800 mm, from hall floor Cylinder dimensions / piston rod 110 / 75 mm Plunger size 700 × 500 × 80 mm Emergency switch Rear protective cladding made of painted mesh Lighting in the press area Closed at the rear and sides 500 mm high light curtain with 14 mm resolution (finger protection) Maximum distance between table top and ram 500 mm Cylinder travel 500 mm Front open width 820 mm Press pressure adjustable from 5 to 30 T via rotary control Travel speed downwards 50 mm, upwards 40 mm per second Total weight approx. 2000 kg Paintwork in RAL (light gray) 7035 and RAL 2009 (orange) Assembly, commissioning, instruction for a separate charge CE declaration and documentation in German Plunger plate with two guide columns Resettable piece counter Position limitation via cam switch Gedpfx Aaeu U Ey Iocouh Adjustable two-hand control with 3 m supply cable Safety test with certificate from an authorized company There are movable sensors on the right-hand side to limit the travel distance. These can be used to set a specific travel distance, for example 300 mm. The press then automatically moves up to the preset point at the touch of a button. The ram plate is guided by 2 guide columns. The rear of the press is closed, but equipped with air outlet openings. There is an ejection chute in the table. Light barrier with under-grip protection. Mountable overgrip protection. Optional: 2 heating plates, 500 × 500 mm heating surface, total size 550 × 550 mm, with controller, up to 200 degrees, incl. insulating plate, 20 mm thick, with timer Optional: Commissioning and training Delivery time Currently a delivery time of approx. 2 weeks is to be expected (without heating plates) Heating plate delivery time approx. 4 weeks. Customer service: From Dresden, Hamburg, Ennepetal, Waibstadt, Göppingen or Gelsenkirchen