Used Friction spindle/percussion presses for sale (12)

Condition: used, Year of construction: 1953, Screw press RICHTER type HSP 25 Machine # 510 Year of construction 1953 Technical data max. pressing force 25 t Table size 540 x 400 mm Bear size 420 x 200 mm spindle diameter 70 mm Sezduxlye stroke 180 mm external dimensions approx. 1200 x 1200 x 2000 mm used, despite the year of construction in good condition

Condition: used, Year of construction: 1960, pressure 3 t Stroke max. 600 mm Czgmbe9Lyu Dimensions (L/W/H) 80 x 90 x 30 mm weight 40 kg

Year of construction: 1980, Condition: good (used), pression: 140 t spindle diameter: 140 mm table supporting surface: 650 x 650 mm tappet area: 545 x 400 mm Nfmif887 max. distance between table and tappet: 700 mm engine: 380 V, 11 kW weight: 3300 kg

Condition: used, nominal force 100 t stroke 320 mm no. of strokes 35 /min distance between columns 360 / 250 mm Distance table/ram, max. stroke up, adjustment up 500 mm table surface area 320 x 450 mm table height over floor 660 mm Dpekhj ram surface 250 x 280 mm spindle diameter 125 mm power capacity 3,0 kW weight 4,5 t Dimensions (WxDxH) 2,0 x 1,6 x 3,1 m only permitted for hot forming work high speed friction screw press with motor, friction screw drive can only be offered without putting into operation, in given condition

Condition: used, Year of construction: 2000, Permanently permissible maximum force: 400 ton Screw diameter: 140 mm Dg3Wpqaj2 Stroke: 190 - 320 mm Number of strokes: 30 s.p.m. Daylight: 350 mm Table surface area : 600 x 550 mm Slide area: 530 x 500 mm Free frontal opening L-R: 610 mm Free lateral opening F-B: 510 mm Table height over floor: 670 mm Required power: 22 kW Height over floor approx.: 3650 mm Dimensions L x W x H: 1400 x 1200 x 3650 mm Weight of machine approx.: 6,5 ton

Condition: good (used), RAS screw press - Width: 80 cm - Depth: 60 cm - Height: 150 cm Xd2Oesyi - Weight: approx. 250 kg Good condition, fully functional, can be inspected and tested on site. Shipping also abroad. Inspection : Basically, I would like to point out that the item can be inspected and tested under power before purchase to avoid misunderstandings. Please ask questions before buying to avoid any ambiguities. For general questions or to make an appointment for a viewing, I can be reached at any time at the telephone number below or above. Errors in the description and prior sale reserved. VAT is shown separately on my invoices. Shipping with forwarding agent.

Condition: used, Year of construction: 1977, Spindle diameter: 900 mm, Table width: 450 mm, Table length: 380 mm, Pressing force: 10 t, Manual spindle press OSTERWALDER type HSP 100 Machine # 771504, year of manufacture 1977 Technical data: Pressing force 10 t Clearance between the uprights 400 mm Table size 450 x 380 mm Bilnhdi2L8G Installation height 370 mm Stroke 370 mm Lateral passage 150 mm Table height 80 mm Size of the through-hole in the table 160 mm External dimensions 900 x 900 x 2130 mm with - pneum. lowering used, in good condition

Year of construction: 1962, Condition: used, nominal force 400 t stroke 140 - 400 mm no. of strokes 24 - 36 /min distance between columns 800 / 700 mm distance table/ram, max. stroke up, adjustment up 900 mm table surface area 700 x 700 mm blow die to die t Allowed max. force t ram surface 630 x 630 mm Dntaoh spindle diameter 220 mm power capacity 26,0 kW weight 18,5 t Dimensions (WxDxH) 1,85 x 2,5 x 4,3 m only permitted for warm forming work with gear drive, single impact / double impact device, impact regulation

Condition: used, Year of construction: 2000, Permanently permissible maximum force: 320 ton Screw diameter: 140 mm Stroke: 190 - 320 mm Number of strokes: 30 s.p.m. Daylight: 350 mm Table surface area : 600 x 550 mm Slide area: 530 x 500 mm E2Lb8Ry Free frontal opening L-R: 610 mm Free lateral opening F-B: 510 mm Table height over floor: 670 mm Required power: 22 kW Height over floor approx.: 3650 mm Dimensions L x W x H: 1400 x 1200 x 3650 mm Weight of machine approx.: 6,2 ton

Condition: used, Year of construction: 1988, Installation height: 480 mm, Table width: 800 mm, Table length: 810 mm, Pressing force: 100 t, Throat depth: 450 mm, Hydraulic knuckle-joint high-speed impact press HILU HILLER & LUTZ Type KNP 100 C Machine. # 1712 Year of construction 1988 Fzilb8C Technical data: Pressing force 100 t Working stroke of UT 8 mm Strokes per minute 70 Ram stroke max. 0 - 120 mm Ram adjustment 80 mm Installation height 480 mm Projection 450 mm Table surface 800 x 810 mm ram surface 700 x 400 mm Failure opening in table 200 mm Anvil plate 200 x 50 mm Drive power 18.5 kW Dimensions L x W x H approx. 1200 x 1800 x 3000 mm Weight approx. 6520 kg With - UV for manual insertion work - foot switch very little used, in very good condition

Condition: used, Year of construction: 1963, nominal force 240 t stroke 130 - 380 mm no. of strokes 21 - 31 /min distance between columns 700 / 610 mm C90Hzhq distance table/ram, max. stroke up, adjustment up 650 mm table surface area 620 x 620 mm ram surface 550 x 550 mm spindle diameter 180 mm power capacity 12,0 kW weight 10,5 t Dimensions (WxDxH) 1,45 x 1,6 x 3,32 m only permitted for warm forming work

Condition: used, 2-column screw press, probably WMW type SS 50 Technical data: Pressing force approx. 5 t - 10 t Handwheel diam. 800 mm Projection between the columns 400 mm Spindle diam. 50 mm Table size 350 x 440 mm Hole in table diam. 100 mm Plunger 130 x 110 mm Installation height 300 mm Rkgfwirwpj External dimensions L x W x H 900 x 500 x 1670 mm Base 700 x 600 mm Weight 350 kg A mounting hole diam. 25 mm, 50 mm deep is available. A corresponding mandrel is clamped by means of a lateral pressure piece. Used, in good condition