Eccentric Press - Single Column

WEINGARTEN A 40

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, First installation in 2024 Operating mode: semi-automatic Machine type: horizontal band saw Lsdpfxjyxcu Ue Abyjhn Cut: miter cut Miter cutting range: -60° to 60° (L/R) Drive power: 5.5 kW, 3 × 400 V/50 Hz Saw blade speed: 20–120 m/min Saw blade dimensions: 7900 × 54 × 1.6 mm Material loading height: 810 mm Shortest remnant length: 40 mm Smallest saw diameter: Ø 10 mm Sawing capacities: - 0 degrees = round D640 mm, rectangle 820 x 640 mm, square 640 mm - 45 degrees R = round D560 mm, rectangle 560 x 400 mm, square 540 mm - 45 degrees L = round 580 mm diameter, 580 x 560 mm rectangle, 560 mm square - 60-degree R = Round 380 mm diameter, 380 x 250 mm rectangle, 360 mm square - 60-degree L = Round 400 mm diameter, 400 x 530 mm rectangle, 400 mm square Dimensions (L x W x H): 3750 x 2400 x 2700 mm Weight: 2500 kg

Year of construction: 2008, condition: ready for operation (used), A packaging cutting and creasing machine for Solarco corrugated board is available. Sheet width: 1700mm, max. sheet dimensions X/Y: 1700mm/4000mm, min. sheet dimensions X/Y: 300mm/600mm, single production output: 200-600 pieces/h, max. multiple production output: 2000 pieces/h, cardboard thickness range: 2mm-8mm, machine dimensions X/Y/Z: approx. 5500mm/4000mm/1900mm, weight: approx. 4500kg. Documentation available. On-site inspection is possible. Lhodpfx Abewgc Aheysn

Condition: used, Year of construction: 1996, pressure 80 t throat 320 mm stroke 6 - 118 mm no. of strokes 30 - 80 Hub/min ram adjustment 70 mm table surface area 830 x 610 mm ram surface 650 x 400 mm column daylight (nach hinten) 630 mm total power requirement kW weight of the machine ca. 8,1 t dimensions of the machine ca. B 1,2 x T 1,9 x H 3,3 m Furnishing: - with gear transmission - fixed table - automatic stroke adjustment - automatic ram adjustment Lhjdpfx Abetycdkoyen - hydr. Overload - Ejector - Grease central lubrication - Cover plate for drainage hole - Continuous speed control using a frequency converter - Machine is technically checked in our company and receives a new control cabinet with safety controls and touchscreen - current UVV test with braking time measurement

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, power: 11 kW (14.96 HP), input voltage: 200 V, pressing force: 160 t, table length: 600 mm, overall weight: 19,000 kg, punching force: 160 t, height adjustment type: electric, installation height: 1,900 mm, ram adjustment: 100 mm, stroke adjustment: 130 mm, Equipment: documentation/manual, safety light barrier, Manufacturer: AIDA Type: NC2-160 Push force: 160t Year of manufacture: approx. 1991 Stroke length: 130mm Distance above table: (adjustable) 285-335mm Table size: 1900x600mm Bear size: 1360x585mm Electric power: 3x200V(!!), 15kW - Japanese standard Ljdpfxeu D Dhxj Abyshn Net weight: 19000kg Size: 2140x2210x3175mm Automatic greasing system. Optionally sheet feeder winder and straightener.

Condition: used, Single-column – Eccentric press WEINGARTEN Type EV 63 Machine No. 738 / 61 Year of manufacture 1962 Pressing force 63 tons Stroke 260 mm Table area 630 x 530 mm Table opening Ø 210 mm Slide area 315 x 260 mm Adjustable slide stroke 8-100 mm Lhsdpfx Aok S Htxjbyon Slide adjustment 63 mm Tool holder bore Ø 40 mm, with clamping piece Installation height max 450 mm Stroke rate 115 strokes / min Compressed air requirement min. 4.5 bar Motor power 4 kW Power connection 380 Volt, 50 Hz Table height above floor approx. 750 to 900 mm - Electrical stroke release via foot switch or two-hand control - Overload protection by shear plate - Clutch-brake combination by WEINGARTEN friction-thread clutch with top dead center through-drive protection - Front crankshaft support bearing - Press table adjustable in height via 2 threaded spindles - Manual centralized lubrication - Control cabinet positioned beside the press - UVV (German trade association for accident prevention) for manual feeding operations Space requirement L x W x H 1750 x 1600 x 2430 mm Weight 4.5 tons Good condition

Condition: new, pressure 25 t throat 200 mm stroke 4 - 80 mm table-size 520 x 400 mm no. of strokes 160 Hub/min work capacity during endurance run 1370 Nm force 2740 Einzelhub adjustment of stroke 4 - 80 mm ram adjustment 40 mm ram surface 160 x 160 mm Lhodjb U Hwnopfx Abyjn hole in the table 200 x 150 mm clamping plate 500 x 380 x 60 mm hole in the table 80 mm weight of the machine ca. 1,9 t

Condition: used, Pressure: 200 t Length of stroke: 40-180mm Strokes by minute: 32 Up table size: 630x500mm Down table size: 900x800mm Lhodpfx Abe Dvi Ueyen Technical characteristics: AIR CLUTCH Power: 15 HP DIMENSIONS: Height: 3000 mms Width: 1000 mms Length: 2750 mms Weight: 14000kgr New electric system

Condition: ready for operation (used), An automated tube bending system with two Wafios bending heads and a Kuka twister robot is available. 1) Bending head Wafios RB20, bending direction: left and right, max. total tool height: 78mm, bending capacity: 360Nm, bending speed: 560°/s, bending radius: 57mm, repeat accuracy bending, turning and feed: +/-0.05mm. 2) Robot Kuka KR 16-2 KRC 2, axes: 6, payload: 16kg, max. reach: 1611mm, repeat accuracy: +/-0.05mm, weight: approx. 235kg. Including suspended magazine, Kuka control cabinet, outfeed conveyor, safety fence, movable control panel, docking station and work table. Documentation available. On-site inspection is possible. Lhjdpfjwwlkijx Abyjn

Condition: used, Year of construction: 1991, Pressing force 1,500 kN Adjustable stroke 20 - 132 mm Ram adjustment max. 90 mm Stroke rate 50 / 75 strokes/min. Ljdpfx Aberm Nqmsyohn Further data and images available upon request Used, the press was completely disassembled Not operational and requires mechanical and electrical overhaul Press is currently mechanically reassembled

Year of construction: 1980, condition: good (used), machine/vehicle number: 3253-80, Offer 22045 Approximate technical data: Lhsdpfx Abektg Dhjyon - Pressing force 10 t - Overhang 150 mm - Table size 520 x 320 mm - Adjustable table height 160 mm - Through-hole in the table 165 x 125 mm - Overall installation height 220 mm - Ram area 240 x 150 mm - Dowel hole in the ram 30 mm - Ram adjustability 40 mm - Stroke adjustment 4 - 60 mm - Stroke rate 130 1/min - Hydraulically actuated clutch - Two-hand operation - Electric foot switch - Separate control cabinet - Drive 380 V / 1.1 kW - Space requirement approx. W 1000 x H 1800 x D 1100 mm - Weight approx. 1300 kg