Condition: as good as new (ex-display), Year of construction: 2017, machine/vehicle number: DF0052, pressing force: 200 t, pressure:200 t distance between columns:1200x1000 mm stroke:600 mm total power requirement:32,5 kW weight of the machine ca.:20,5 t dimensions of the machine ca.:4000x2600x5000 m draw back pressure:20 t Master cylinder:1 Stück voltage:400 V Hodpfx Aefxyirealjfd frequency:50 Hz :24 V :BOSCH/REXROTH dayligth:800 mm :1200x1000 mit T-Nuten nach Kundenwunsch DIN 650-22 mm work height max.:1100 mm pre-running speed:170 mm/sec return speed:150 mm/sec Speed printing phase:15 mm/sek. Hydraulic block:REXROTH demand for oil:500 l pressure control:über PLC (Mindestdruck 20t) Oil Cooling:elektrisch :220 (im Schaltschrank) V memory:200 Programme :über Monitor von 20-200 t Controll:Zweihandbedienung beweglich :2-10 mm/sec :0-10 sec

Condition: new, Year of construction: 2017, machine/vehicle number: DF0152, pressing force: 80 t, pressure:80 t stroke:500 mm total power requirement:12 kW Hedpfx Aaofxyh Holjfd weight of the machine ca.:5,1 t Controll:Zweihandbedienung cylinder:1 work height max.:800 mm working area:800 x 800 mm Table dimensions:800 x 800 mm pestle plate:2800 x 1300 mm table height:800 mm pre-running speed:9,8 mm/sec work speed:9,8 mm/min return speed:18 mm/sec :700 mm Column-Diameter:75 mm :10 kW main drive:WEG 15 kW pump:REXROTH, Parker elektronische Axialkolbenpumpe kW :25 (bei280bar) t :200 mm :30 mm :80 mm/sek. :REXROTH/Parker :REXROTH/Parker :300 L :ca. 250 L :über PLC (Mindestdruck 10 to :zur Ölabkühlung ? mit Elektroventilator :manuell, über Schmiernippel oder Kartuschen :SIEMENS / MOELLER :auf Schwenkarm :automatisch über 2 Handbetrieb mit Schlüsselschalter, manuell über Bedienpult im Einrichtbetrieb :Zweihandbedienung beweglich, :zur Datenübertragung :Siemens für Fernwartung :zur Hublängeneinstellung :0 ? 10 sec. Oil tank capacity:150 l :800 mm lang, vorne und hinten, 300 mm unten diagonal

Condition: new, Year of construction: 2019, machine/vehicle number: DF0303, pressing force: 160 t, pressure:160 t Hfodpjfxygpefx Aaljd distance between columns:700 mm stroke:400 mm Return Capacity:16 t Engine Output:15 kW Travel:400 mm :550 mm Ram plate:700 x 600 mm table height over floor:900 mm Table size:700 x 600 mm speed of forward flow:50 mm/sec Pressing speed:10 mm/sec :50 mm/sec Oil cooling (electric):1,5 kW (max) Oil Tank Capacity:300 l weight of the machine ca.:4,3 t dimensions:1150 x 2600 x 2400 m ejector:30 x 30 mm ejector stroke:150 mm pressure of ejector:15 t ejector speed:25 mm/sec no. of ejector pins:1 Stück Heating panels (L x B) with 2 measuring sensors diagonally:550 x 500 mm Siemens Control System:S7 1200 Monitor:12 Zoll :2400 ? :1200 ? :1200 ?

Condition: new, pressing force: 400 t, pressure:400 t distance between columns:3400 mm stroke:500 mm total power requirement:55 kW weight of the machine ca.:49 t draw back pressure:26 t pump capacity:131 Lt./min dimensions:7.900 x 5.500 x 4.300 mm :5000 mm :2800 mm table height over floor:700 mm distance between table / ram:1000 mm Hfodofhcc Ropfx Aalsd :700 l traversing speed:0-33 mm/sec. down speed:0-10 mm/sec :0-25 mm/sec.

Condition: new, Year of construction: 2022, pressing force: 100 t, Estimated Equipment Weight 3500 Kg Equipment Dimensions (front x depth x height) (Ca. Aussenmasse) 1354 x 2005 x 2595 mm Hodpfxshmi T Uj Aalefd Table Dimensions (Useful Area) front x depth (Tischgroesse) Ø1050 mm Opening between table and hammer (Daylight) 350 mm Hammer stroke (Stoessel-Verfahrweg) 300 mm Drive power (Leistung in KW) 14,24 Kw Motor Rotation 1500,00 RPM Pump Flow 44,50 LPM Pump Motor Ratio 27,59 cm³/Rot Working Force (Zylinderleistung) 100,00 Ton Return Force (Rückzugskraft) 10 Ton Forward Speed 250 mm/s Working Speed with Pressure (Arbeitsgeschwindigkeit) 3~15 mm/s Return speed (Hebegeschwindigkeit) 150 mm/s Working Pressure (Maximaler Arbeitsdruck) 210,00 Bar Cylinder quantity 2 pc Stem Diameter 41,76 mm Cylinder Diameter 250,97 mm Cylinder stroke (Stoessel-Verfahrweg) 300,00 mm Reservoir Capacity (Volumen des Oeltanks) 350,00 Liters Extractor Cylinder 5,00 T Cylinder travel (Stoessel-Verfahrweg) 150,00 mm

Condition: like new (used), Year of construction: 2025, functionality: fully functional, pressing force: 40 t, table width: 1,000 mm, table length: 600 mm, 40T H-frame press with ram table, calibration press • Press capacity: 6-40 T (adjustable) • Maximum installation height: 700 mm • Usable area of lower table: 1000x600 mm • Usable area of ram: 1000x600 mm • Frame type: H-frame • Guide column diameter: Ø 100 mm (4 units at the corners) • Table height from floor: 800 mm • Overall dimensions approx. (WxDxH): 2,100x1,600x3,500 mm • Total weight approx.: 3,500 kg • T-slots and bores can be manufactured to customer specification. HYDRAULIC CYLINDER: • Piston stroke: 0-500 mm (adjustable) • Cylinder diameter: Ø 140 mm (1 unit) • Piston rod diameter: Ø 80 mm (1 unit) • Working pressure (max.): 260 bar • Return speed: 90 mm/sec • Ram speed: 9 mm/sec • Idle speed: 80 mm/sec HYDRAULIC POWER UNIT: • Hydraulic pump (brand: ASC): 67+8 L/min (1 unit) • Motor power: 4 kW (1 unit) • Pressure accuracy during press stroke: +/- 5 bar • The hydraulic unit is mounted on the upper rear side of the press. • Hydraulic block and valves by DUPLOMATIC. • A manometer is used to display the pressure. • Air and oil filters are manufactured by FILTREC. • An electronic oil level switch is used. • Air cooling (heat exchanger) is used to cool the hydraulics. • Pressure adjustable via pressure switch. • Control via sensor. • Protective cover (door) on the back of the press. • Safety light sensors and interior lighting included. ELECTRICAL CONNECTION: • Main supply: 400V AC • Control voltage: 24V DC • Frequency: 50 Hz • Hydraulic main motor connection: 4 kW Hedpfx Ajxrby Hsalefd • Total connected load: approx. 6 kW CONTROL CABINET EQUIPMENT: • Protection class: IP 54 • Reserve space: 30% • Cooling: Yes (air cooling) • Interior lighting: Yes • Operating mode selector switch: Yes (lockable) • Electrical components by SIEMENS, ALLEN BRADLEY, SICK.

Condition: used, Year of construction: 2016, machine/vehicle number: 4303, pressing force: 500 t, pressure:500 t passage width:2100 x 1500 mm stroke:1000 mm total power requirement:62 kW weight of the machine ca.:39 t dimensions:5100 x 2800 x 4040 mm return capacity:40 t Main cylinder:2 Stück column diameter:Hauptzylinder 360 mm Table dimensions:2100 x 1500 with T-Nute mm Ram size:2100 x 1500 mm table height over floor:850 mm pre-running speed:300 mm/sec return speed:300 (bei 20T Stößelgewicht) mm/sec Pressure Speed:200T = 28 mm/sec Oil Tank Capacity:ca. 1000 l Auxiliary cylinder:2 Stück column diameter:Hilfszylinder 120 mm Total size Table Tops:ca. 2750 x 1600 mm Total size of plunger plates:ca. 2750 x 1600 mm Pressure Speed:300T = 20 mm/sec Pressure Speed:500T = 6 mm/sec Retract force of the plunger:40 t Tension of the control chain:24 V voltage:400 V Frequency:50 Hz Axial piston pump (REXROTH/Bosch A4VSO125):290 lt/min Daylight Opening:1500 mm Hydraulic block:REXROTH pressure control:über PLC (Mindestdruck 50T) Cylinder:4 x ?90 x 70 mm stroke length max.:300 über PLC einstellbar mm Outejection speed forward:95 mm/sec. Outejection speed return:240 mm/sec. Capacity:4 x 15T bei 250 bar t Pressure setting:über Monitor von 50-500T t Pressure constant posture:0-900 sec Hfodpfedyynvox Aalsd Hydraulics tank:2000 l Siemens Control System:S7 300 Storage capacity:200 Programme Electronics from German manufacturers:SIEMENS/MÖLLER Tax desk:auf Schwenkarm Light sensors sick:1500 auf der Vorderseite mm

Condition: new, pressing force: 100 t, pressure:100 t passage width:700 mm stroke:450 mm weight of the machine ca.:6 t dimensions:ca. 3000 x 1210 x 3100 mm return capacity:10 t :22 kW Max Working height:850 mm :1 - 100 mm speed of return flow:1 - 100 mm/sec :1 - 10 mm/sec. pestle plate:1090 x 600 mm table plate:1090 x 600 mm positioning accuracy:0,1 mm table height over floor:800 mm :300 l Oil cooling (electric):1,5 kW (max) ejector:d=100 mm Hedpfx Aefxyhqsaljfd ejector stroke:210 mm pressure of ejector:100 t no. of ejector pins:1 Stück Monitor WEG:15 Zoll :2.000,-- ? :2.400,-- ? :3.000,-- ? :2.400,-- ? :5.800,-- ?

Condition: used, Year of construction: 1991, pressing force: 650 t, pressure:650 t passage width:920 mm Hfedpfx Aajfhmuvoled stroke:1750 mm weight of the machine ca.:ca. 47 t Table area:2000 x 1500 mm ram surface:2000 x 1500 mm Daylight Opening:2100 mm Hydraulic:203 bar closing speed:500 mm/min pressing speed:0,5 - 10,4 mm/sec opening speed:250 mm/sec Solve speed:0,5 - 66,4 mm/sec Return Capacity:150 t total power requirement:75 kW Measurements (approx.):4,4 x 2,5 x 7,5 m

Condition: used, Year of construction: 2019, pressing force: 250 t, pressure:250 t passage width:2500 mm stroke:500 mm total power requirement:60 kW weight of the machine ca.:39 t dimensions:2720 x 3750 x 4350 mm return capacity:25 t max. working heidht:800 mm Table dimensions:3090 x 1500 mm :3090 x 1500 mm table height over floor:1000 mm pre-running speed:400 mm/sec pressure speed:bei 125 t, 50 mm/sec Return Speed:400 mm/sec speed rapid traverse:400 mm/sec :1500 l Oil cooling (electric):3 kW (max) Vibration damper plates:je 450x450x85 mm pressure:250 t bei 220 bar t/bar pump capacity:176 Lt./min Hedpfx Aasd Nq Idolefd :46er / 10 my Hydraulics from Bosch Rexroth or other German manufacturers :Parker, Hydac :inklusive Light Barriers from Schmersal/Pilz:Pilz Monitor:Omron 12 Zoll

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: -, pressing force: 40 t, This press is based on a proven and field-tested design. It can be newly manufactured on short notice and specifically adapted to your individual application. An inspection of the existing machine at the customer’s site is possible by prior arrangement. The press is suitable for straightening operations, assembly work, as well as for pressing-in and pressing-out processes. ### Technical Data – Frame *Press force: 40 t *Table usable area: 635 × 555 × 70 mm *Distance between columns: 900 mm *Opening (ram – table, max.): 500 mm *Distance table to floor: 1,200 mm *Overall dimensions (W × D × H): 1,880 × 900 × 2,300 mm *Total weight: approx. 1,500 kg *Frame: Welded steel frame ### Hydraulics – Cylinder *Ram stroke: 550 mm *Piston rod diameter: Ø 90 mm *Cylinder diameter: Ø 150 mm *Max. working pressure: 280 bar ### Hydraulics – Power Unit *Pump: ASC *Delivery capacity: 12 l *Motor power: 4 kW *Return speed: 16 mm/s *Idle speed: 10 mm/s *Oil tank capacity: 120 l *Hydraulic block / valves: Hydropack *Pressure gauge: Manometer *Pressure adjustment: Adjustable *Pressure switch: Available *Power unit: Mounted laterally to the press ### Operation * Manual operation via adjustable hand lever valve * Sensitive speed control via lever position * Pressure adjustment via rotary knob ### Electrical Data *Main supply: 400 V AC *Control voltage: 24 V DC *Frequency: 50 Hz *Hydraulic main motor connection: 4 kW *Total connected load: approx. 5 kW ### Control Cabinet / Electrical Equipment *Protection class: IP 54 *Spare space: approx. 30% *Cooling: None *Interior lighting: None *Operating mode selector: Yes, lockable *Electrical components: Siemens, Allen-Bradley, Sick ### Colour Scheme Hedpfx Aoyia D Rjaljfd *Frame / base body: RAL 7035 (Light grey) *Power unit & moving parts: RAL 7016 (Anthracite grey) *Paint finish: 2-coat paint (primer + top coat) *Special colours: RAL colours freely selectable by arrangement ### Documentation & Standards *Documentation: German and English *Scope of delivery, documentation: * CE documentation * Spare parts lists * E-plans and E-parts lists (digital) Guidelines & standards: * 2006/42/EC Machinery Directive * 2014/35/EU Low Voltage Directive * 2014/30/EU EMC Directive * EN ISO 16092-1 / -3 * EN 60204-1 * EN ISO 12100 * EN ISO 4413 ### Note The table cut-out was originally implemented at the explicit request of a customer. Alternatively, the press can be supplied with a closed steel plate or a steel plate with T-slots. The design of the table is customized to the specific application. The press ram features an integrated tool holder. This allows the installation of various press heads with a diameter of up to 250 mm, making the press highly adaptable to changing tools and production processes. We are happy to advise you on a configuration that is precisely tailored to your production and specific application. Hydraulic workshop press, 40 t press, Durendus press, new hydraulic press, workshop press with table, assembly press, straightening press, press-fit press, industrial workshop press, CE-compliant press, hydraulic press 400 V

Condition: like new (used), Year of construction: 2025, functionality: fully functional, pressing force: 300 t, Technical specifications Tonnage: 300 T Clear span between uprights: 2,100 mm Stroke of cylinder: 600 mm Maximum distance between heating plates: 800 mm Heating plate dimensions: 1,800 x 1,100 mm Table height from floor, incl. damping plates and heating plate: 800 mm Overall height approx.: 3,600 mm Width approx.: 3,800 mm Depth approx.: 1,870 mm Weight approx.: 22,000 kg Hydraulic power unit by BOSCHREXROTH Hydraulic pump by BOSCHREXROTH: 105 L/min 22 kW Approach speed: 150 mm/sec Working speed: 15 mm/sec Return speed: 150 mm/sec Alternative: Hydraulic power unit by DUPLOMATIC Hedpfxjx Ap Itj Aalsfd Hydraulic pump DAIKIN HYBRID-SERVO: 130 L/min 15 kW Approach speed: 150 mm/sec Working speed: 15 mm/sec Return speed: 150 mm/sec Two-hand control Ram return by pressing the blue button Stroke limitation via Leuze measuring rod and monitor Fixed lower table with T-slots (X-direction): 2,100 x 1,100 mm Ram with T-slots (X-direction), size: 1,900 x 1,100 mm CE certificate and user manual: Included in delivery

Condition: new, Year of construction: 2025, pressing force: 20 t, 20 T Single-Column Straightening Press (DCS-20) TECHNICAL DATA (MODEL – DCS-20) DESIGN Pressing capacity – 5–20 t (adjustable) Maximum installation height – 700 mm Table usable surface – 500 x 600 mm Ram usable surface – 500 x 600 mm Frame type – C-frame Table height from floor – 800 mm Overall dimensions approx. (W x D x H) – 1,150 x 1,250 x 2,469 mm Hsdpfx Aajyghvfjlsfd Total weight approx. – 1,900 kg T-slots – according to DIN 650 (18 mm) or machined to customer specification HYDRAULIC CYLINDER Piston stroke – 0–500 mm (adjustable) Cylinder diameter – Ø 100 mm (1 unit) Piston rod diameter – Ø 60 mm (1 unit) Max. working pressure – 250 bar Return speed – 50 mm/s Idle speed – 25 mm/s Pressure build-up time with closed tool – max. 2 s (steel on steel) HYDRAULIC UNIT Hydraulic pump – REXROTH, 11 l/min (1 unit) Motor power – 4 kW (1 unit) Pressure accuracy during pressing stroke – ±5 bar Oil tank capacity – 150 l Mounting – Hydraulic unit installed at the top rear of the press Hydraulic manifold and valves – HYDROPACK Air filter and oil filter – FILTREC Oil level – electronic oil level switch ELECTRICAL CONNECTION Main supply – 400 V AC Control voltage – 24 V DC Frequency – 50 Hz Hydraulic main motor connection – 4 kW Total connected load approx. – 4 kW

Condition: new, Year of construction: 2025, pressing force: 20 t, 20 T Single-Column Forging Press (DCS-20) Technical Specifications - Press Pressing capacity: 5–20 t (adjustable) Maximum installation height: 700 mm Table usable area: 500 x 600 mm Ram usable area: 500 x 600 mm Frame type: C-frame Table height from floor: 800 mm Overall dimensions (W x D x H): approx. 1,450 x 1,500 x 2,400 mm Total weight: approx. 1,900 kg T-slots: according to DIN 650 (18 mm) or machined to customer specifications Hydraulic Cylinder Piston stroke: 0–500 mm (adjustable) Cylinder diameter: Ø 90 mm (1 pc.) Piston rod diameter: Ø 60 mm (1 pc.) Rapid traverse cylinder diameter: Ø 40 mm (1 pc.) Rapid traverse piston rod diameter: Ø 25 mm (1 pc.) Max. working pressure: 250 bar (adjustable) Return speed: 140 mm/s Rapid traverse speed: 140 mm/s Pressing speed: 4–10 mm/s (adjustable) Pressure build-up time (closed tool): max. 2 s (steel on steel) Hjdpsyght Rsfx Aaljfd Hydraulic Unit Hydraulic pump: REXROTH, 22 l/min (1 pc.) Motor power: 7.5 kW (1 pc.) Pressure accuracy during pressing stroke: ±5 bar Oil tank capacity: 150 l Mounting: Hydraulic unit mounted at the rear/top of the press Hydraulic manifold and valves: HYDROPACK Air filter and oil filter: FILTREC Oil level: electronic oil level switch Electrical Connection Main supply: 400 V AC Control voltage: 24 V DC Frequency: 50 Hz Main hydraulic motor connection: 7.5 kW Total connected load: approx. 10 kW

Condition: new, Year of construction: 2025, pressing force: 110 t, Table size 1200x1000mm Pedal rotates up to 180 degrees Table extends up to 1000 mm Hjdpfxjv N D Nce Aalofd Table can be rotated 180 degrees around its axis Table can be raised up to 75 degrees Downward speed 1-10 mm sec. Upward speed 25 mm sec. Maximum open height 1300 mm Stroke 800 mm Table moves at 30 mm/second Weight 11.5 t Height 3000 mm Width 2900 mm SIEMENS S 7 1200 Complete hydraulics from BOSCH REXROTH Complete control cabinet technology from SIEMENS Manufactured under German supervision in Brazil, CE compliant

Condition: like new (used), Year of construction: 2023, total height: 2,500 mm, table height: 900 mm, pressing speed: 8 mm/s, pressing force: 50 t, overall weight: 2,900 kg, operating pressure: 250 bar, ram plate width: 498 mm, table length: 522 mm, table width: 522 mm, type of input current: AC, power: 10 kW (13.60 HP), input voltage: 400 V, distance table to ram: 600 mm, oil tank capacity: 130 l, operating speed: 8 mm/s, Equipment: safety light barrier, If the press does not exactly match your requirements profile, please click here to request a customized offer tailored to your needs: Contact us for a customized quote Hidrobrasil manufactures presses to your exact specifications at surprisingly competitive prices! #### 50 T top ram heating press, in double column design suitable for continuous shift operation, with these basic data: - With one heating level - Idle speed up to 10 mm/sec (adjustable via rotary control) - Opening speed up to 40 mm/sec - Starting pressing speed 8 mm/sec - Table size/heating plate size 522 mm deep, x522 mm wide - Plunger size/heating plate size 498 mm deep, x498mm wide - 2 heating plates, electrically heated, up to 200 degrees - Oil temperature monitoring - Circuit oil cooling on the hydraulics - Pressure maintenance valve 0 to 3600 sec - Pressure setting from 8 T to 50 T (50 T = 300 bar) - Travel limitation optionally via pressure or position - Two-hand operation, adjustable or fixed - Double-coated machine body - Signal light: red: alarm, yellow: baking phase, green: ready - Heating plates with electric heating rods, up to max. 200 degrees - Assembly, commissioning, instruction for a separate charge ### Technical data ## Type of construction - Press design: Double column press ## Thermally neutral - Temperature range: 80 - 120 °C ## Operating sides - Number of operating sides: 1 side ## Forces - Pressing force max.: 500 kN - Free tearing force max.: 20 kN - Pressure build-up time: Max. 3 sec. (closed tool steel on steel) ## Dimensions - Max. Opening width: 600 mm - Stroke and min. opening: 300/300 mm - Table height above floor with heating plate: 900 mm - Height above floor (overall height): approx. 2,500 mm - Hall height: min. 3,500 mm - Parallel deviation at 20 °C: +/- 0.1 mm - Deflection: < 0.2 mm/m (determined at max. clamping force with 70 % occupancy) - Total weight of the press without operating materials: approx. 2.9 t - Accessories: 2 heating platens (522 × 522 mm or 498 × 498 mm, max. heating capacity) - Heating platens equipped with temperature sensors: up to 200 degrees. ## Speeds - Fast closing: 10 mm/sec. - Max. pressing speed: 8 mm/sec. ## Sound pressure - Sound pressure level, measured at a height of 1.5 m at the control panel in accordance with DIN 45635-T16-KL3: max. 78 dB(A) ## Hydraulics - Number of press cylinders: 1 pc. - Max. operating pressure: 250 bar - Pressure build-up time: Max. 3 sec. - Pressure accuracy during the pressing stroke: +/- 5 bar - Main pump: BOSCHREXROTH gear pump, approx. 26 l/min - Oil volume: approx. 130 liters (HLP 46 MW) - Ambient temperature: max. 40 °C - Oil temperature: max. 55 °C - Flow temperature: not specified - Automatic pressure readjustment after 5% pressure loss - Pressure stabilization for up to 3600 sec Hjdetwv S Nspfx Aalsfd ## Electrical system - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Hydraulic main motor connection: 7.5 kW - Total connection without heating plates: approx. 10 kW Description of the heating press: The Hidrobrasil heating press with a pressing force of 50 tons and a table size of 600x600mm is specially designed for industrial applications. It is an oil-hydraulic double column press equipped with a sliding table mounted on spring-loaded rollers. This press is ideal for a wide range of pressing processes as it works precisely and reliably.

Condition: new, Year of construction: 2022, pressing force: 15 t, Single column press with 15 T capacity suitable for continuous shift operation a) travel speed 10 mm/sec. downwards, b) opening speed up to 25 mm/sec c) starting pressing speed 10 mm/sec d) table size 400x400 mm e) ram size 200x200 mm, with T grooves and central cylinder clamping f) Overall size approx. 1150x800x1750 mm g) oil temperature display on oil tank h) pressure adjustment from 5 T to 17 T ( adjustable by rotary control ) i) Hand lever operation with two speeds j) Machine body powder-coated, or double-painted Hjdpfxeitylge Aalefd k) Control cabinet supply line from above with 3000 mm cable and 16 Ampere plug l) assembly, commissioning, instruction against separate calculation Press design Single column press Thermally neutral 80 - 120 °C Number of operating sides 1 side Forces Press force max. ( at 250 bar ) 150 kN Free ripping force max. 10 kN Pressure build-up time Closed die Steel to steel Max. 2 sec. Max. Opening width 400 mm Stroke and min. opening 350 mm Table height above floor 850 mm Height above floor (headroom) approx. 1900 mm Hall height min. 2.500 mm Parallel deviation at 20°C +/- 0.1 mm Determined at max. clamping force with 70% occupancy < = 0.3 mm/m Weight Total weight of the press without operating materials approx. 1.1 to Fast closing with 10 mm sec. Press speed 10 - 0 mm sec. Sound pressure level, measured at 1.5m height at the control panel according to DIN 45635-T16-KL3 max. 78 db(A) Number of pressing cylinders 1 pc. Operating pressure max. 290 bar Pressing pressure build-up time . 2 sec. Pressure accuracy during pressing stroke +/- 5 bar Main pump Gear pump approx. 9 L/min Oil volume approx. HLP 46 MW 80 liters Ambient temperature max. 40 °C Oil temperature max. 55 °C Flow temperature °C Electrical system 400 V AC Main supply Control voltage 24 V DC Hydraulic pumps 24 V DC Frequency 50 Hz Hydraulic connection Main motor 3 kW Total connection Approx. 5 kW Equipment control cabinet Protection class IP 54 Reserve space Approx. 20 Cooling no Interior lighting no Operating mode switch Lockable yes

Year of construction: 2021, condition: new, The solution for a quick convenient tool change that an employee can do alone. We have now designed a changing table that can be transported and operated by a forklift, a small electric forklift or even a forklift truck with lifting device. Additional information a) Maximum tool size 1000 x 700 mm long Hodjhtfdtjpfx Aalsfd b) Maximum tool weight 1.500 kg c) Minimum tool size 600x500mm d) Total height approx. 600 mm e) Fork insertion height of the forklift 60 mm f) Width of forks up to 210 mm g) Minimum distance between forks 300 mm h) Travel speed of the tool approx. 20-25 mm per second. i) Manual locking after the tool is loaded j) Electric cable length 5 meters. k) motor class IE 3, with 2,2 KW, 400 V, 50 Hz l) Weight approx. 500 kg m) Incl. two anchor fittings on the table and two anchor holders for fastening to the press n) Built-in spirit level for leveling on the press o) Emergency switch, on-off switch, switch for forward travel, switch for reverse travel p) Machine body double painted

Condition: as good as new (ex-display), Year of construction: 2020, pressing force: 160 t, Hydraulic 160 T double cylinder insertion press Double column press- two cylinder press with 160 T capacity at 250 bar. a) idle speed downward 9,8 mm/sec. b) upward speed up to 15,0 mm/sec. c) table size 1500x600x100 mm, height adjustable d) ram plate, 1500x600x100 mm e) year of construction 12/2020 f) motor power 11 KW g) pump capacity 22 L/minute h) travel limitation by cam switch i) Open height 700 mm j) ram travel 500 mm k) Remote control via two-hand operation l) Pressure setting via rotary control from approx. 30 to 160 T m) Approx. height 2800 mm n) T-slots according to customer requirements o) Weight approx. 4,200 kg p) Oil tank with approx. 200 L volume q) Painting in RAL 5005 ( royal blue ) or according to customer's request. r) For safety reasons the ram plate is painted orange RAL 2009 or signal yellow RAL 1023 s) Assembly, commissioning, instruction can be provided at a separate charge. The travel can be adjusted by cam switches. Hfjdpfsgz H Dhox Aaled The ram/table size of the machine shown is 1600x600x100 mm.

Condition: new, machine/vehicle number: DF0178, pressing force: 500 t, pressure:500 t Hfjdpjfxyh Uofx Aalsd table length:3500 mm table width:3500 mm stroke max.:3600 mm dimensions:8500 x 3700 x 8500 mm return capacity:50 t weight:250 t Fold-down upper tool:180 Grad :max. 33 mm/sec table extendable:3800 mm :33 mm/sec table load:100 t power capacity:65 kW voltage:400 V control voltage:24 kW frequency:50 Hz work speed:0 - 10 mm/sec. pre-running speed:0 - 10 mm/sec return speed:0 - 25 mm/sec :0 - 10 mm/sec :800 l Ram Height:1300 mm table height:700 mm :inklusiv ? :inklusiv ? :inklusiv ? :inklusiv ?

Condition: new, Year of construction: 2019, machine/vehicle number: DF0309, pressing force: 200 t, pressure:200 t table length:2500 mm table width:2000 mm stroke max.:2050 mm Hjdpfx Aajfxyi Delsfd dimensions:ca. 9200 x 4700 x 5800 mm draw back pressure:25 t Approx. weight (w/o operational materials):50 t column diameter:210 mm table speed:25 mm/sec table extendable:2000 mm table speed:30 mm/sec table load:15 t power capacity:20 kW work speed:1 - 10 mm/sec. pre-running speed:10 mm/sec :25 mm/sec :10 mm/sec. Oil Tank Capacity:400 l Oil cooling (electric):1,5 kW (max) Podestal height:650 mm Table Height:800 mm Ram Height:850 mm Control System by Siemens:S7 1200 Monitor:WEG 12 Zoll :10200 ? Maintenance Balcony:5000 ? :4.000,-- ? :1.000,-- ? :18000 ? :1.500,-- ? :12000 ? Upper Tool Folding:170 Grad Swivel table:75 Grad Table tiltable:75 Grad Ajecters with 60T in the pestle centre:12000 ? Blessed plate folding by 180 degrees:14000 ?

Condition: new, Year of construction: 2019, pressing force: 275 t, pressure:275 t distance between columns:3000 mm Hfjdpsfxyigjfx Aaljd total power requirement:30 kW weight of the machine ca.:40 t draw back pressure:27 t pump capacity:Axialpumpe mit Proportionalventil :6000 mm :max. 3000 mm Table dimensions:6000 x 3000 mm table height over floor:700 mm distance between table / ram:1100 mm :450 l traversing speed:auf X und Y, 30-33 mm/sec. down speed:2-10 mm/sec :2-50 mm/sec. Cylinder hub:900 mm Cylinder diameter:440 mm Stestle extension:200 / 200 mm / Ø :40 mm Siemens Control System:S7 1200 Monitor Siemens 9":Touch Panel Tax desk:tragbar

Condition: new, machine/vehicle number: DF0261 - Rev.00, pressing force: 63 t, pressure:63 t table length:1200 mm Hjdpefhcc Sofx Aalefd table width:1000 mm stroke max.:1050 mm dimensions:ca. 3350 x 1800 x 4700 mm draw back pressure:6 t Approx. weight (w/o operational materials):10 t column diameter:120 mm Fold-down upper tool:180 Grad Swivable Table:75 Grad table speed:25 mm/sec Table tilting:75 Grad table extendable:1100 mm table load:5 t Engine Output:10 kW Oil Tank Capacity:200 l Oil cooling (electric):1,5 kW (max) Monitor:(WEG) 12 Zoll

Condition: as good as new (ex-display), Year of construction: 2015, pressing force: 63 t, pressure:63 t table length:700 mm table width:1000 mm weight of the machine ca.:ca. 9 t dimensions of the machine ca.:4500 x 4300 x 2700 m :1 Stück stroke length max.:1200 mm daylight dimension : table/slide up:1200 mm table height:700 mm :um 1200 mm :um 45 Grad :um 170 Grad :1250 x 1000 mm table load:5 t :25 mm/sec pre-running speed:95 mm/sec Hfedpfjffamqsx Aaled return speed:80 mm/sec work speed:von 0 bis 10 mm/sec.

Condition: new, Year of construction: 2018, machine/vehicle number: DF0163, pressing force: 800 t, pressure:800 t distance between columns:1200 mm stroke:500 mm total power requirement:85 kW weight of the machine ca.:40 t dimensions:4100 x 3500 x 6650 mm draw back pressure:80 t Master cylinder:1 Stück column diameter:250 mm dayligth:1000 mm Table dimensions:1300 x 1100 mm ram surface:1300 x 1100 mm Hjdpfx Aaodxvfpjljfd :800 mm table height over floor:950 mm table load:5 t pre-running speed:250 mm/sec return speed:150 mm/sec :1000 l :10 mm/sec :inbegriffen ? :inbegriffen ? :inbegriffen ? :inbegriffen ? :inbegriffen (800 x 530mm) ? :inbegriffen (800 x 530mm) ?