Condition: new, Year of construction: 2025, operating hours: 6 h, Our best-selling briquetting press, the classic. + Tried and tested, simple technology for extremely low susceptibility to errors + 25 years of experience, further development and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Options for an extra charge: * Surcharge for the level indicator that enables automatic operation + € 995 net * Surcharge for large pre-compression chamber + 980 € (recommended for light material like straw) Briquette diameter: 50 mm Front bush: 50 mm Briquette stroke max .: 40 mm Briquette lift opt ​​.: 40 mm Throughput (depending on material): 30-60 kg / h * * depending on the bulk weight * based on a bulk weight of 200 kg per cubic meter . Motor power: 5.5 kW 400 volts / 50 Hz / 3 phases Length: 1680 mm Gsdpfx Aajgl Nlmjcekc Width: 1100 mm Height: 1500 mm Weight: 680 kg Oil volume: 110 liters Silo diameter: 1000 mm Silo content: approx. 0.7 square meters Pump: 27 liters Hydraulic pre-compressor Option cooling pressing tongs: no Hydraulic oil cooling option: yes Level monitoring option: yes CE compliant . Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 18% - Maximum chip length 15 mm - Installation temperature: temperature-controlled room at at least + 5 ° C - The customer must insure himself against loss of hydraulic oil - The loading must be free of metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear

Condition: excellent (used), Year of construction: 1978, functionality: fully functional, Veneer Press JU 60 Year of manufacture: 1978, Pressing area: 2200 x 1100 mm, Dimensions: 2540 x 1220 x 185 mm, Total pressing pressure at 320 atü = 655 t, with safety cord, push-button control, in very well-maintained condition, no oil leakage Machine subject to differential taxation Gkjdpfexflcfjx Aacoc

Condition: used, Year of construction: 2000, functionality: fully functional, Window press - capacity max/min.: 3000*2000/150*360 mm Gsdpfx Asxd Axneacskc

Condition: good (used), Code: 0223 Gkodpoxmhcdjfx Aacjc Brand: ITALPRESSE Model: PHF Hydraulic press for curved veneers for processing seats, chair backs, benches, tables and other curved items Technical data: Platen dimensions mm 2600 x 1600 Opening between platens mm 1500 Thrust ton 100 Movement from bottom to top Motor power Hp 4

Condition: repair required (used), Year of construction: 1965, Veneer press Gksdpfxswwrgks Aacec Manufacturer: Joos Model: HP 65 Year of manufacture: 1965 Pressing area: 2,200 x 1,100 mm Opening height: 400 mm Pressing pressure: 65 t Heating: electric Weight: approx. 2 t The hydraulic cylinders operate stiffly. The plate does not lower automatically when the valve is opened. With assistance, the plate lowers. Pressure build-up and electric heating are functional.

Condition: good (used), Hydraulic gluing press for solid wood, e.g. window and door scantlings, solid wood panels, etc. Working length: 5 m. Working height: 1.53 m. Working depth: 0.10 m. Hydraulic unit: 2.2 kW. 10 hydraulic press cylinders. 5 pneumatic hold-down clamps. Max. pressing pressure: 150 kg/cm². Hydraulic unit: 2.2 kW. Gkjdexiu Dgjpfx Aacsc

Condition: like new (used), Year of construction: 2024, functionality: fully functional, power: 110 kW (149.56 HP), Complete Refurbished Amandus Kahl C35-780 Pellet Press Production Line. The C35-780 pellet press itself has been recently refurbished with a full documentation of the all the new parts available, with one of them included in the pictures. The production line includes: - Amandus Kahl C35-780 Pellet Press - The Pellet Press has a new 110 KW engine - Electrical cabinet with emergency stop including complete electrical documentation - Conveyor belt - A sieve system that sieves the pellets and automatically cools them - Hydraulic nut - A roller head in perfect condition, - Electrical wiring included. - A feeding screw that brings the product to the Pellet Press Gkedoxd U Izspfx Aacec - Dispenser system that automatically measures the number of pellets to release for e.g. a big bag. - 4 additional die's of 6 mm - 60 liters of extra synthetic oil List of refurbished parts: - 7 new bearings - 2 new wear rings - 1 new air filter - 2 new oil seals - 1 new oilfilter - 1 new oil pump - 20 liters of 800/460 Syntethic Oil - 1 New Pressure Piece Main Shaft

Condition: good (used), Year of construction: 2014, Used carcass press - GANNOMAT Concept 70 Eco Gedoxhc T Topfx Aacskc - Year of manufacture: 2014 - Available December 2025

Condition: excellent (used), Catalogue number 7737 TECHNICAL DATA - Pressing force: hydraulic - Briquette shape: round - Briquette diameter: 70 mm - Hopper diameter: 1000 mm - Output: approx. 70 kg/h - Automatic machine operation - Motor: 5.5 kW Gedpsxbr I Hjfx Aacjkc - Dimensions (L/W/H): 1800x1150x1540 mm - Weight: 900 kg FEATURES – Italian-made – Used briquetting press – DTR technical documentation – Very good condition Net price: 36,900 PLN Net price: 8,680 EUR based on exchange rate 4.25 EUR (Prices may change with significant currency fluctuations)

Condition: good (used), Code: 0158 Brand: ITALPRESSE Model: LOCK FORM SYSTEM AIR - CE Standard Hydraulic air membrane press with loading and unloading - CE Standard 3-D coated on one face lamination of veneer to panels shaped or profiled on one face and flat on the other to produce cabinet door raised panels, drawer fronts, desk tops, table tops, kitchen tops, etc. 3-D lamination of plastic foils (PVC, PPE, ABS, Transfer foil ) to panels sheped or profiled on one face to produce: cabinet doors, drawer fronts, desk tops, table tops, kitchen tops, store fixture components, room doors, etc. Platen dimensions mm 2650 x 1250 Piece height mm 55 Pressure control manometer Gedpfx Aaopvk Diocokc Automatic pressure reset Opening timer

Condition: excellent (used), Year of construction: 2002, Body press Manufacturer: LIGMATECH Type: MPH 10/08 Year of construction: 2002 Cage size: max. 2,200 x 1,150 mm Press pressure: 14 kN Number of vertical cylinders: 3 Number of horizontal cylinders: 3 Gkjdpfx Aeuy Sp Noacoc Dimensions: 3,700 x 850 x 2,500 mm

Condition: excellent (used), Year of construction: 1986, Frame press T2 RP year of construction 1986, 2,2 kw Gkodpfx Aaou Rp Eiococ Ele..-Hydraulic 3 press cylinders vertical, 2 horizontal Adjustable pressing pressure 0 - 2000 kg 2500 x 3000 mm pressing size Space requirement 4000 x 950 x 2600 mm

Condition: refurbished (used), functionality: fully functional, power: 15 kW (20.39 HP), input voltage: 400 V, High-Performance Pellet Mill – Available Immediately! We offer a fully refurbished pellet mill in excellent condition, ideal for both laboratory and production applications. This machine combines quality, safety, and ease of operation. Technical Data: • Motor: 15 kW / 400 V (three-phase) • Maximum current: 63 A • Die type: Vertical • Die diameter: 200 mm • Maximum die thickness: 35 mm • Die hole diameter: 3–20 mm • Number of rollers: 2 units • Roller diameter: 96 mm Performance: • Softwood: 150–180* kg/h • Hardwood: 120–150* kg/h Weight: 1,050 kg Dimensions (mm): Length 1,590, Width 1,200 Height (mm): 2,200 Condition: Excellent condition, primarily used for laboratory testing. Gksdew R Rtuepfx Aacoc Refurbished for sale purposes. Scope of delivery includes: • Shear pin and reinforcement ring for press protection in case of overpressure • Die and rollers • Miscellaneous accessories Extras (not included in the price): • Transport of the press • On-site training and commissioning • Pelletizing test with your own material

Condition: good (used), machine/vehicle number: Code: 0168, Code: 0168 Brand: STROMAB Model: ST 3000 - CE Standard Rotating pneumatic clamping machine, suitable for planks in general, squared timbers, strips for forming panels, table tops, steps for stairs and coffin - CE Standard Motorized rotation with release pedal and handy control wheel for worktable rotation Working capacity 3000 x 1200 mm Nr. 9 pneumatic front pressers ( 3 each side) Nr. 18 vertical columns with cylinder, diameter 80 mm ( 6 each side) Gkodjl Snzvopfx Aacsc Nr. 3 Working stations Thrust of vertical cylinder 8 bar kg 400 Daily output (8 hours) m2 263 Mechanical safety barriers Overall dimensions : mm 4800 x 2850 x 2300 Weight kg 1100

Condition: good (used), Code: 0332 Brand: AMASPRES (ITALY) Model: 3000 Gkodeq Ec Ebepfx Aacsc Membrane press Working size: mm 3000 x 1300 Opening mm 500 Working height mm 250 Cover opening and closing with vertical pneumatic pistons This press is suitable for veneer of shaped pieces , such as window sash frames, curved pieces Upper heating with hot air Heating of lower side with hot air Consuption about 9 kwt Working cycle: about 10 min. Complete compressor for lifting of cover and under cover Processing prevacuum adjustable up to 6.5 atm The machine is equipped with time alarm, thermostat, thermometer, warning lights for calories and pumps Overall dimensions press mm 4100 x 1700 x 2050 h - Weight kg 1800 Overall dimensions depressor mm 1400 x 500 x 900 h - Weight kg 100

Condition: good (used), Code: 0163 Brand: ITALPRESSE Model: MEC 4/B Hydraulic hot press with water heating for veneer, panels, furniture, custom-made furniture, doors in wood, composite materials, aluminium and various Technical data: Platen dimensions mm 2500 x 1300 Opening mm 300 N° 4 cylinders Total pressure ton 60 Motor power Hp 1,5 Platen heating by water Boiler Godpswzbfwefx Aacokc Perimeter emergency rope Overall dimensions mm 3100 x 1610 x 1830 h Weight kg 3000

Condition: good (used), Code: 0017 Godpfovvmwijx Aacokc Brand: ITALPRESSE Model: SCF/8-S Hydraulic press for hot/cold cycle for wood materials, composite materials, plastics and various materials Technical data: Platen size mm 3000 x 1500 N° 6 Drilled solid steel platens thickness mm 38/40 - Coated in aluminum N° 5 Daylight openings N° 4 intermediate platens Cylinder stroke mm 450 Press space mm 90 Platen movement from bottom to top Max working temperature 120° Platen heating by water or steam Total thrust ton 120 Specific pressure on 80% of the surface area kg/sq cm 3,3 N° 8 thrust pistons diameter mm 70 Hydraulic unit power Hp 4 Timer for timed opening Overall dimensions mm 4200 x 1800 x 2900 h Weight kg 13000 approx

Condition: good (used), Code: 0119 Brand: KOLMAG - ITALY Model: PGP 600 F Hydraulic press for moulds, frames, furniture elements, solid wood doors, plastic materials, composite materials and various Press modular structure with heavy thick plates without weldings and worked by tool machine Godpfewk Ntzex Aacjkc Oleodinamic plant with pistons prefilling system in order to have a quick opening and closing of the platens Dimensions of massive steel platens mm 1600 x 500 - Thickness mm 60 with electric resistances - Max temperature 260°. N° 3 pistons diameter mm 240 Pressure kg/cm2 56 Thrust Tonn 450 Safety photocells Hydraulic power unit Kw 7,5 Power absorbed heating platens 31 Kw Control board with pressure control gauge - Timer for platens opening - Telethermometer to regulate upper platen temperature - Telethermometer to regulate lower platen temperature - Switches for opening and closing of the platens - Emergency push button Overall dimensions mm 2250 x 1700 x 3300 h Weight kg 9000

Condition: good (used), Code: 0037 Godpfx Aov Ab Dwjacekc Brand: OMC - ITALY Model: PL/CONVERSION-S - CE Standard Membrane press with loading on the front side - CE Standard Multifunctional air membrane press, allows extreme versatility in one machine only of all types of finishing of the panel It can be operated as: Cold press Hot press Membrane press for Pvc coating or veneer of shaped panels form one side only Membrane press for Pvc coating or veneer of indentations in the wood from both sides Technical data: Work platens dimensions 2500 x 1300 mm Perforated steel platens Useful tank dimensions 2350 x 1180 x 50 mm N° 10 pistons - stroke mm 400 Pressure kg/cm2 6.5 Overall dimensions mm 3200 x 1800 x 2700 Weight kg 8000

Condition: good (used), Code: 0024 Brand: ITALPRESSE Model: NUOVO/SP Quick setting semiautomatic case clamp Technical data Manual loading Max useful dimensions mm 2500 x 600 x 1250 Min useful dimensions mm 250 x 600 x 280 Motorized horizontal cross-beam with display Gedevv Ul Uepfx Aacjkc Vertical beam setting N° 6 vertical cylinders N° 6 horizontal cylinders Cylinders stroke mm 70 Cross-beam stroke mm 920 Installed power Kw 0,55 Overall dimensions mm 3600 x 800 x 2550 h Weight kg 1400

Condition: good (used), Code: 0419 Brand: ITALPRESSE Model: V/2 Electric press for cold gluing of doors, furniture, panels, composite materials, technical materials, plastics, aluminum, various materials Equipped with a motor that is operated by a switch with automatic return. This switch controls the movements of the mobile platen towards or away from the panels, while the required pressure and the release are controlled by a handwheel, which is on the side of the press. This system allows for maximum pressure with minimum effort Platen dimension mm 2500 x 1200 Opening mm 650 Pressure screw n°2 Installed power Hp 0,75 Gksdju A S Haspfx Aacsc Overall dimensions: mm 2850 x 1200 x 1650 h Weight kg 880

Condition: good (used), Code: 0089 Brand: VILMAR PRESSE - ITALY Model: PS 1000 Hydraulic press for mouldings, frames, furniture elements, plastics, composites and various materials Technical data: Platens size mm 980 x 500 Opening mm 300 N°3 pistons diameter mm 160 each Total thrust pressure up to 250 tons Safety photocell barrier Gkodpfxjwbu I Se Aacjc Double push buttons Hydraulic power unit Kw 4 Heating platens up to 300 degrees Power absorbed heating platens 8+8 Kw Overall dimensions mm 1600 x 1000 x 2200 h Weight kg 3400

Condition: good (used), Code: 0136 Brand: ITALPRESSE Model: FORMATIC 20.9 Hydraulic fluid membrane press Two sided lamination of veneer to panels shaped or profiled on one face and flat on the other to produce cabinet door raised panels, drawer fronts, desk tops, table tops, kitchen tops, etc. Gkodpfxjpbvqvs Aacoc 3-D lamination of plastic foils (PVC, PPE, ABS, Transfer foil ) to panels sheped or profiled on one face to produce: cabinet doors, drawer fronts, desk tops, table tops, kitchen tops, store fixture components, room doors, etc. Platen dimensions mm 2000 x 900 Daylight mm 325 Cylinder stroke mm 325 Heating electric boiler Kw 27 Thrust ton 300 ton N° 3 thrust cylinders Hydraulic unit power Kw 5,5 Pressure control manometer Automatic pressure reset Opening timer Overall dimensions mm 3300 x 1400 x 2400 h Weight kg 8100

Condition: good (used), Code: 0218 Brand: ORMAMACCHINE Model: P25/2 Hydraulic cold press for wood, furniture, doors, panels, furnishings , composite materials, plastics, aluminum and various materials Gedpjxlt Uvefx Aacskc Platen dimensions mm 2500 x 1200 Aluminum-coated platens Opening mm 500 N° 2 hydraulic pistons Ø 40 Motor Hp 1,5 Overall dimensions mm 2600 x 1200 x 2100 h Weight kg 800

Condition: good (used), Code: 0159 Brand: ITALPRESSE Model: SCF 6 Hydraulic hot platen press for joinery, furniture, furnishings, wooden doors, panels, composite materials and various Technical data: Platen dimensions mm 3000 x 1300 Aluminum-coated assembled steel platens with water heating by boiler Daylight opening mm 650 N° 6 cylinders Possibility of excluding N° 2 side cylinders Thrust ton 90 Power Kw 2 Emergency perimeter rope Overall dimensions mm 3750 x 1550 x 2330 h Godpfswx Rl Iex Aacekc Weight kg 3600