Condition: as good as new (ex-display), Year of construction: 2025, Machine for sale at a special price Another machine, available immediately (ex works Neckartailfingen) * Includes a 1-year warranty. Your advantages: + Very robust, simple technology + Excellent price-performance ratio + Suitable for continuous operation + Long-standing, well-functioning/established machine Includes control cabinet with timer operation The press is switched on manually and then runs until the set time on the timer has elapsed (e.g., 4 hours). Then, the press switches off. Technical data: Briquet dimensions: approx. 30 x 30 mm (square), Briquet length: 5-40 mm *material-dependent Throughput: up to a maximum of 20 kg/h *material-dependent Machine dimensions: approx. 137 x 75 x 148 cm (length x width x height), Machine weight: approx. 250 kg, Silo capacity: approx. 250 liters, Bsdpfx Aked Nnwlswswp Motor: 2.2 kW, 400 V - 50 Hz, Noise emission: 62 dB, Raw material requirements: - Wood chips and dust smaller than 15 mm in length - Moisture content less than 18% ATRO - Sand, stones, metals and minerals increase wear --- Options available at an additional cost: - Timer function + €490 net Machine is started manually and switches off automatically after the set time X. - Level sensor for automatic operation + €1450 net Press starts and stops automatically * NEW!!! Also available in 230 volts, Motor then 3 kW instead of 2.2 kW, Additional cost + €890 net (delivery time then approx. 8 weeks) - Special dies + €2,950 net ---

Condition: good (used), Year of construction: 2001, Good, used condition Low operating hours (1,675 h) Motor: 11 kW Pressure: adjustable up to a maximum of 250 bar Throughput: up to max. 220 kg/h Briquette size: 150x60 mm Press dimensions: approx. 2200x3000x1920 mm (LxWxH) Control cabinet dimensions: 500x1250x2120 mm (LxWxH) Bsdowcc D Rspfx Akwjwp Weight approx. 3,000 kg

Condition: good (used), Year of construction: 2025, Requirements: - Material must be free-flowing (grain size less than 18 mm) - Material must be pure, with an ash content of less than 1% ATRO Pay attention to: sand, stones, and minerals - Compressed using press tongs - Material must be dry, maximum 15% ATRO New: Innovative combination of briquette and pellet Options at an extra cost: Plant construction / mütek system technology: - mütek Shredder MRZ shredding technology - Conveyor belts - Overband magnets - Extraction systems, optionally with rotary valve - Transport screws - Silos - Control system interfaces of all kinds - Semi-automatic packaging technology + 24-hour operation possible + Compact design + High energy efficiency thanks to innovative hydraulics + Briquette density of up to ≥ 1 kg/l possible *Details after testing Operating principle: The machine has a silo with a stirrer. In each of the 4 corners of the storage silo, there is a vertical screw that compacts the material downwards into the compression chamber. The machine operates with two cylinders, each of which compresses in two directions (either when the cylinder moves forward or backward). This results in 4 briquette outlets, each with 6 individual briquettes. *ideal for automatic feeding of the heating boiler Format Ø 30 mm Throughput up to a maximum of 310 kg/h Motor power: approx. 27 kW (total) Dimensions: 3.1 x 2.3 x 2.2 m Weight: 3.55 tons Your advantages: Compact briquette/pellet format enables the firing of industrial furnaces via screw feed. Fully automatic 24-hour operation possible. High energy efficiency. Briquettes/pellets with consistently high quality and density. For automatic feeding into industrial furnaces Bodpfxsfbb Ars Akwswp Small to medium quantities of wood chips, which are produced in the processing industry of various materials (especially wood, biomass, etc.), can be optimally compressed. The small Ø 30mm format is an attractive alternative. Unlike our conventional briquettes, these can be automatically fed into industrial furnaces. In addition to wood, various other materials can also be processed without any problems (various biomass and agar-based materials).

Condition: reconditioned (used), Year of construction: 2002, functionality: fully functional, ELECTRO-HYDRAULIC PANEL PRESS WITH OIL BOILER, MOTORIZED FEED, INFEED & OUTFEED TABLES Brand: ORMA Model: LS 25/13 AF BO Serial No.: 69440202 Year: 2002 (Photos taken before overhaul, functional tests & cleaning) Bwjdpewxdctefx Akwjp Press specifically designed for manufacturing solid wood laminated panels using special adhesives. SPECIFICATIONS: - Heated platens 2500x1300mm by oil circulation at 120°C Opening height (usable stroke): 200 mm Maximum vertical platen pressure: 80 tons (2.5 kg/cm²) Maximum vertical pressure of front cylinders: 40 tons (25 kg/cm²) - Horizontal pressing stroke: 150 mm Adjustable working thickness: 12 to 50 mm Horizontal pressure: 7.5 tons (7 to 10 kg/cm²) CONFIGURATION: - Heavy-duty steel frame - Motorized infeed table 2.50x1.40m with rack-and-pinion pusher - Hydraulic power units 3x 2 HP - Control panel with 2 foot pedals; adjustment for feed/horizontal & vertical working pressure/working temperature/pressing time Pressure gauges for: platen pressure, pusher stop, and locking presser - Mobile lower platen with aluminum surfaces 6 hydraulic cylinders Ø70mm with 4 rack-and-pinion balancing guides - Heated upper/lower circuits (internal coil) 24kW electric boiler with 1.1kW circulation pump - Independent rear locking presser with 3 hydraulic cylinders Ø70mm, double rack guides - Lateral pressers 5 hydraulic cylinders Ø40mm Adjustable feet 70x120mm (height adjustable) - Outfeed roller table length 1.25m - Complete electrical cabinet with all controls - Power supply: 400V, three-phase 50Hz, IN 44A Installed power: 32kW - CE marking Lockable main switch, emergency stop button Emergency stop cable Safety guards Transport dimensions (LxWxH): 3.50x2.40xh.2.00m + 2.40x1.80xh.1.80m (as delivered, packed) Weight: 6200kg + tables

Condition: good (used), Code: 0328 Brand: ITALPRESSE Model: GL / 14,5 - 50 - 420 T - CE Standard Hydraulic press for composite materials and solid surfaces, moulds and decorative panels, suitable for use in the aerospace, aviation, woodworking, furniture, interior design, automotive, shipbuilding, construction, energy, defence, sports and public transport sectors, and various – CE Standard – Year 2005 Technical data: N°5 solid steel plates 1450 x 500 mm N° 3 pistons Diathermic oil heating Total thrust 420 tonnes Working diagram - see enclosed diagram Max power 9,3 Kw Full-load current 19 A The oil tank is located on top of the press and is fitted with a sight glass for checking the oil level Fluid (oil) temperature controller Two-hand control for closing the press Photocell safety barriers Fixed safety guards Bwsdpoyuyl Iofx Akwep

Condition: good (used), Code: 0283 Brand: ITALPRESSE Model: 25/13 Bedpeyazdisfx Akwjwp Fabricated platen for diathermic oil press Technical data: Platen dimensions: mm 2500 x 1300 Max temperature up to 120° Max working pressure: 3/5 kg/cm2 Heating medium pressure 0,5 ate Composition: Aluminium - Flat gauged steel sheet - Coil of piping for fluid circulation - Reinforcement piping - Flat gauged steel sheet - Insulating material

Condition: good (used), Code: 0279 Brand: ALBERTI V. Model: PCC 33/18 Continuous cycle hot press for veneering, furniture, doors, panels, composite materials and various Bedpex I Nz Hofx Akwowp Max working length 3300 mm Max working width 1800 mm Opening 200 mm N° 6 pistons diameter 100 mm Solid platens Diathermic oil heating Loading conveyor

Condition: good (used), Code: 0223 Brand: ITALPRESSE Model: PHF Hydraulic press for curved veneers for processing seats, chair backs, benches, tables and other curved items Technical data: Platen dimensions mm 2600 x 1600 Opening between platens mm 1500 Thrust ton 100 Movement from bottom to top Motor power Hp 4 Bedpfxexmhcds Akwowp

Condition: good (used), Code: 0158 Brand: ITALPRESSE Model: LOCK FORM SYSTEM AIR - CE Standard Hydraulic air membrane press with loading and unloading - CE Standard Bodspvk Diepfx Akwswp 3-D coated on one face lamination of veneer to panels shaped or profiled on one face and flat on the other to produce cabinet door raised panels, drawer fronts, desk tops, table tops, kitchen tops, etc. 3-D lamination of plastic foils (PVC, PPE, ABS, Transfer foil ) to panels sheped or profiled on one face to produce: cabinet doors, drawer fronts, desk tops, table tops, kitchen tops, store fixture components, room doors, etc. Platen dimensions mm 2650 x 1250 Piece height mm 55 Pressure control manometer Automatic pressure reset Opening timer

Condition: good (used), Code: 0119 Brand: KOLMAG - ITALY Model: PGP 600 F Hydraulic press for moulds, frames, furniture elements, solid wood doors, plastic materials, composite materials and various Press modular structure with heavy thick plates without weldings and worked by tool machine Oleodinamic plant with pistons prefilling system in order to have a quick opening and closing of the platens Bwedpfx Akjwk Ntzjwsp Dimensions of massive steel platens mm 1600 x 500 - Thickness mm 60 with electric resistances - Max temperature 260°. N° 3 pistons diameter mm 240 Pressure kg/cm2 56 Thrust Tonn 450 Safety photocells Hydraulic power unit Kw 7,5 Power absorbed heating platens 31 Kw Control board with pressure control gauge - Timer for platens opening - Telethermometer to regulate upper platen temperature - Telethermometer to regulate lower platen temperature - Switches for opening and closing of the platens - Emergency push button Overall dimensions mm 2250 x 1700 x 3300 h Weight kg 9000

Condition: good (used), Code: 0136 Brand: ITALPRESSE Model: FORMATIC 20.9 Hydraulic fluid membrane press Two sided lamination of veneer to panels shaped or profiled on one face and flat on the other to produce cabinet door raised panels, drawer fronts, desk tops, table tops, kitchen tops, etc. 3-D lamination of plastic foils (PVC, PPE, ABS, Transfer foil ) to panels sheped or profiled on one face to produce: cabinet doors, drawer fronts, desk tops, table tops, kitchen tops, store fixture components, room doors, etc. Platen dimensions mm 2000 x 900 Daylight mm 325 Cylinder stroke mm 325 Bwedpfx Aepbvqvokwop Heating electric boiler Kw 27 Thrust ton 300 ton N° 3 thrust cylinders Hydraulic unit power Kw 5,5 Pressure control manometer Automatic pressure reset Opening timer Overall dimensions mm 3300 x 1400 x 2400 h Weight kg 8100

Condition: used, amount 20 weight 0,5 kg Bwsdpfx Aksy Spv Sowep material HSS

Condition: excellent (used), Year of construction: 2006, sieve 6 mm engine 2x90 kW ca. 660 mm Capacity ca. 3.000 - 5.000 kg/h Number of press rollers 2 Münch RMP 660 pellet press for producing wood pellets and biomass pellets from sawdust, wood chips, and other organic waste materials. The machine is suitable for industrial pellet production with high pressing performance and consistent pellet quality. Ideal for wood processors, sawmills, and biomass companies. Bsdpjyi Ht Ijfx Akwowp

Condition: used, length 2.800 mm width 600 mm Bjdpfoviwqmsx Akwswp height 1.800 mm Number of pressing cylinders 6 Stk. work height max. ca. 1.000 mm Solid pneumatic gluing press with perforated plate for flexible arrangement of the press cylinders. One cylinder without pressure shoe.

Condition: excellent (used), functionality: fully functional, shelf length: 3000 mm shelf width: 1300 mm integrated, electrically powered water heating system Bwodpfx Akozimr Nswjp 6 hydraulic cylinders 5 loading cycles safety shear pin CE marking

Year of construction: 1985, condition: used, closing pressure 4360 kN table-size 730 x 730 mm control B+R Industrieelektronik draw back pressure 190 kN ajustment speed max. 60 mm/sec return speed max. 90 mm/sec daylight between the columns 900 mm total power requirement 30 kW dimensions of machine L x W x H 3,61 x 2,1 x 3,1 m dimensions of switch cabinet 0,85 x 0,44 x 2,0 m Bwsdpfotqqr Eex Akwop dimensions of hydaulic 1,0 x 0,85 x 2,36 m weight ca. 15 t = vulcanizing press with vertical closing unit, with form removal and form separation device

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Self-loading press for Steton P111 veneer, 3000×1300 Video: photos.app.goo.gl/1piXqdhN9MUjXRyD9 Working length: 3000 mm Working width: 1300 mm Automatic material loading Heated platens using oil Diameter of vertical cylinder: 70 mm Diameter of horizontal cylinder: 50 mm Bjdpfx Akezh Ivmowewp Year of manufacture: 2019 Total power: 24.5 kW

Condition: used, Year of construction: 2023, functionality: fully functional, For sale: a wood joining press from LISY - DVOŘÁK. Year of manufacture: 2023. It was used for 1-2 days per week. It is in very good condition. Bwjdpfx Akszhacfswsp The press length is 5 m, and the infeed belt is 2.8 m. The press is a two-channel type. The material height is 40-150 mm. Power consumption: 1.5 kW.

Condition: used, Technical specifications: Max. dimensions of the glued component: 2900 x 1900 mm 3 vertical clamps 2 horizontal clamps Hydraulic clamps Power supply: 400 V Motor power: 1.5 kW Motor speed: 1410 rpm Overall dimensions: Bwedpfxjzikz Uo Akwop Length: 3500 mm Width: 1000 mm Height: 2600 mm

Condition: used, Technical specifications: Number of pistons: 4 Piston diameter: 70 mm Connection to central heating system Shelf dimensions: 1300x2500 mm Pneumatic side clamps Clearance: 400 mm Safety switch Engine power: 3 kW Power supply: 380 V Overall dimensions: Length: 3450 mm Width: 2300 mm Bedpfx Aszikwiekwowp Height: 1900 mm

Condition: new, Taylor 6/2.5m Clamp Carrier System For Solid Wood Edge / Face Laminating. A versatile 6 section clamping machine specifically designed for solid wood edge and face laminating, the Clamp Carrier is ideal for producing a variety of components such as panels, table tops, block gluings, joinery sections and stair parts. The patented 'equaliser' clamp arms incorporate a number of important features not found on other types of mechanical clamp that help ensure a quality glue joint is produced. As standard the machine is equipped with a pneumatic clamp tightener / loosener, pneumatic component flattener and air motor drive for rotation. On request the machine can be specified with a working width of 3.1m and also with 12 working sections. 2.5m (8.5ft wide) 6 section frame. 36 x 302 type clamp arms with 90mm (3.5") high jaws and 1015mm (40") max. opening. (6 clamps per section). 1 x 80U type swing style pneumatic clamp tightener and component flattener with push button operation. 1 x 80AA pneumatic motor drive rotation. Front rest - manually operated. Bjdpfx Ajdy Dtrjkwswp Pneumatic joy stick control for rotation / forward reverse. CE safety perimeter guards to sides / rear

Condition: new, JLT Clamp Rack Systems For Solid Wood Edge & Face Laminating Bsdpfeb Evnkex Akwswp A rugged and versatile clamping system specifically designed for solid wood edge and face laminating of both hard woods and softwoods. Available in two standard sizes, the Clamp Rack (or Panel Clamp) is ideal for the production of components such as panels, joinery sections, stair components,worktops, block gluings, and table tops etc. Frames can also be clamped. The patented equalizer clamp arms incorporate a number of important features not found on other types of mechanical clamp that help ensure a quality glue joint is produced. They can be positioned anywhere on the frame being easily moved from side to side / row to row. When not in use they can be hung vertically from a top support bar thus saving valuable workshop space. For face laminating material up to 150mm (6") in thickness optional rocker plates can be supplied which easily slide over the top and bottom clamp jaws thus evenly distributing the clamping pressure. When using the 401 type clamp and rocker plates material up to 200mm (8") can be laminated. Standard max. opening of the clamp arm is 1020mm (40") although larger sizes are available on request

Condition: used, Technical specifications: Working length: 3000 mm Working width: 1200 mm Maximum wood thickness: 120 mm Bedpfx Asziacujkwjwp Overall dimensions: Length: 2100 mm Width: 3700 mm Height: 2200 mm

Condition: used, Technical specifications: Max. dimensions of the glued component: 2500x1200 mm Bsdpfsziacnjx Akwewp 2 vertical clamps 2 side clamps Maximum clamping force: 2700 kg Pneumatic clamps Overall dimensions: Length: 2600 mm Width: 1600 mm Height: 2100 mm

Condition: used, Technical specifications: Maximum dimensions of the glued component: 1800x3000 mm 3 vertical clamping units - top 2 horizontal clamping units - side Hydraulic clamping units Power supply: 400 V Motor power: 2.5 kW Overall dimensions: Bedpfxszh U Shs Akwewp Length: 3750 mm Width: 1200 mm Height: 2500 mm