Condition: as good as new (ex-display), Shell end mills (24340) Chjdpfedwbk Dox Advoc Diameter 86 mm and length 62mm Diameter 97 mm and length 63 mm Weight 4, 5 kg

Condition: like new (used), Year of construction: 1996, Retrofitted: 2025 Codpfx Adjwfunyovshc Numerical control: NUEVO/NEW HEIDENHAIN TNC-320 Technical features Dimensions Table dimensions: 6000 x 2000 mmNumber of T slots: 13T slots dimensions: 22 mm Traverses of axis X axis traverse: 6000 mmY axis traverse: 3800 mmZ axis traverse: 1000 mmVertical capacity (VC): 500 / 1500 mm (direct exit)Distance between columns: 3100 mm Milling head Universal head UM40 (Body B: manual / Body C: 3º auto-indexing) Direct spindleTool clamping system: HydraulicTaper nose: ISO50 (DIN-69871)  /  Pull stud: DIN-96872Speed range: 3000 rpmSpindle power: 30 kW Feedrates Rapid feedrate (X / Y,Z): 7200 / 12000 mm/min Weight and dimensions Machine weight approximate: 50000 KgMaximum weight on table: 15000 kgMachine dimensions approximate: 14740 x 5330 x 5050 mm Accesories Guarding: 2 sliding doors with a new perimetral wire-mesh safety fenceHead changer: automatic with lateral hinge/support in columnChip conveyor: 2 longitudinal palletsElectronic handwheel: New HR-510Coolant: External Internal high pressure through spindle (internal only with direct exit head) Sales conditions Guarantee: 6 months mechanical spare partsSale conditions and price: On request View all technical features

Condition: used, functionality: fully functional, x-axis travel: 400 mm Chsdpfexhhcmsx Advec y-axis travel: 220 mm z-axis travel: 400 mm Speed range: 40 - 2000 rpm Speed steps: 18 Internal taper: SK40 Spindle head movement automatic/manual: 190 / 200 mm Clamping surface (table): 730 x 240 mm Table longitudinal travel automatic/manual: 390 / 400 mm Table vertical travel automatic/manual: 390 / 400 mm Feed range: 8 - 400 mm/min Rapid traverse: 1200 mm/min Electronic digital display SONY Rotary table Sheet steel cabinet with 5 drawers and various machine accessories, e.g. various spare parts, tool holders, milling cutters, exchangeable table

Condition: used, Year of construction: 1990, x-travel 600 mm y-travel 400 mm z-travel 420 mm control TNC 355 Heidenhain Chjdpfstqmm Ajx Advjc Main spindle: turning speed range - main spindle 20 - 4.000 min/-1 power capacity - main spindel 7 kW transmission ratio 3 tool taper SK 40 distance spindle /table 127 - 567 mm spindle diameter in front bearing 55 mm stroke of quill vertical 75 mm tool clamping 10 kN swivellable +/- 90 ° work table: table surface area 900 x 458 mm T-slots 7x 63 x 14H7 feeds: feed range 1 - 5.000 mm/min Feed force 5,4 kN rapid traverse ( X / Y / Z ) 7 / 7 / 6 m/min total power requirement 13 kW weight of the machine ca. 3,0 t dimensions of the machine ca. 4,0 x 4,0 x 2,1 m Tool Room Milling Machine - Universal HERMLE - UWF 900 E - Spindle-Head swivable +/- 90°

Condition: good (used), functionality: fully functional, Brand – Fexac (Spain) Model – UP Table dimensions – 1100 mm x 240 mm XYZ travels – 800 mm x 210 mm x 400 mm Spindle speeds – 48 rpm to 1500 rpm Spindle taper – ISO 40 Chjdpfexg Tkaex Advoc Table feeds – 11 mm/min to 500 mm/min Machine dimensions: height: 1700 mm x length: 1600 mm x depth: 1700 mm weight: 1500 kg

Condition: used, Empty weight: 10.000 kg Dimensions (LxBxH): 220 x 270 x 250 cm Price: On request Lots of accessories! Includes - probe Includes - 3 vices Chodpexdc Szefx Advsc - Number of axes: 2 - Travel X [mm]: 550 - Travel Y [mm]: 410 - Travel Z [mm]: 460 - Max. spindle speed [rpm]: 15000 - Interface: BT40 - Table size length [mm]: 860 - Table size width [mm]: 400 - Max. workpiece weight [kg]: 400 - Documentation available: No - CE marking present: Yes - Control type: Matsuura G-Tech 30i - Control: CNC - Motor power: 22.0kW - Transport dimensions: 2200mm x 2700mm x 2500mm (l x w x h) - Transport weight [kg]: 10000kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Vertical head (28571) Type Huron type SK 40 Condition :as good as new Mounting surface diameter 255 mm Centering pin diameter 165 mm Bolt circle diameter 18 mm Fixing screws 210 mm Projection 300 mm Chjdpfx Ajvcl Adsdvjc

Condition: new, The VHF 3.2 is a robust and versatile universal milling machine that fits seamlessly into the category of Conventional Vertical Milling Machines and the product group of Universal Milling Machines. This high-performance model enhances the proven capabilities of the VHF series, featuring a combination of a horizontal spindle and a swiveling vertical milling head, which expands its range of applications. Built with a rigid machine bed from high-strength HT-200 cast iron and equipped with precision-made headstock gears, the VHF 3.2 offers durability and reliability. Its extensive setup area of 1,370x320 mm and the ability to handle angular bores make it suitable for diverse tasks in both repair workshops and educational settings. The machine’s powerful servo-motor provides infinitely variable feed across all three axes, facilitating efficient operations. One can enjoy minimal downtime thanks to rapid positioning of the work table, alongside a comfortable control panel swiveling to enhance usability. Request a quote today to explore how the VHF 3.2 can elevate your machining capabilities in the realm of Conventional Vertical Milling Machines and Universal Milling Machines. Chjdpen E Ni Hefx Advsc

Condition: good (used), Year of construction: 1995, functionality: fully functional, Control: SIEMENS 840D Solution Line (electrical overhaul 2017) x-travel: 7.000 mm y-travel: 2.100 mm z-travel: 1.500 mm z-travel vertical: 1.200 mm Universal milling head (orthogonal design) Swivel range of milling head holder: 340 °Grad Swivel range of milling head: 180 °Grad Mounting cone for tools with steep taper: SK50 spindle truning speed range: 22 - 2.240 U/min Feed rate x,y and z-axis: 2 - 12.000 mm/min Rapid traverse rate x,y, and z-axis: 12.000 mm/min Drive power 100% ED / 60 % ED: 31,5 / 39 kW Clamping plate dimensions of clamping plate: 6.000 x 1.500 x 300 mm Number of T-slots: 6 T-slot distance: 250 mm max. load: 10 t/m² Equipped with: NC dividing head PEISELER AWU 650 with vertical faceplate, diameter 650 mm automatic universal milling head, orthogonal, (Completely refurbished 2017, rarely used since then) SIEMENS electronic handwheel 3 support tables various prism support blocks MAYFRAN hinged belt conveyor Coolant system with paper belt filter Work platform moving in the X direction, protective cover with viewing window Chedpfjxhhb Nex Advjc The machine is in exceptionally good condition and can be viewed while under power. In 2017, a new SIEMENS 840D Solution line control system was installed, all drive motors and the control cabinet were replaced at the same time.

Condition: good (used), Year of construction: 2005, travel distance X-axis: 560 mm, travel distance Y-axis: 320 mm, travel distance Z-axis: 400 mm, feed rate X-axis: 2,400 m/min, feed rate Y-axis: 2,400 m/min, feed rate Z-axis: 2,400 m/min, table width: 450 mm, table length: 950 mm, Fixed table 950 x 450 mm Feeds all direction ISO-40 and 3kW 3 Axis Digital Read Out Systsem CE-Safety  Coolant system with semi closed lower base  X-Axis: 560mm Y-Axis: 320mm Z-Axis: 400mm Table Length: 950mm Table Width: 450mm Table load: 350 Spindle speeds: 2240Rpm Feed rate X-Axis:2400mm/min. Feed rate Y-Axis:2400mm/min. Feed rate Z-Axis:2400mm/min. Stroke pinole: 0 - 95mm Length: 1800mm Width: 1600mm Height: 1900mm Weight: 1700kg Chsdpfx Adoxdltbjvec Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), functionality: fully functional, Spindle mount: ISO 30 Speed range: approx. 70 – 2500 rpm Spindle head swivels in 2 directions automatic drilling feed Table: Dimensions: approx. 1070 x 230 mm Longitudinal travel (X): 850 mm Cross travel (Y): 370 mm Cedjxg Ih Hjpfx Advjhc Vertical travel (Z): 400 mm T-slots: 3 units, 16 mm wide automatic feed and rapid traverse on X-axis dimensions: length 1700 mm x height 2150 mm x depth 1700 mm weight approx. 1300 kg

Condition: good (used), DECKEL FP2A CNC milling machine Cedpforfaq Rox Advehc with Contour 3 control and vice. x-path 300 mm y-path 300 mm z-path 400 mm Spindle holder ISO 40 Gmqcb8 Spindle speeds 40 - 4000 rpm Table size 620 x 390 mm Feed rates infinitely variable 4 - 4000 mm/min Table load 0.45 t Total power requirement kW Machine weight approx. 1.6 t Operating voltage 380 V Base area 1.9 x 2.0 mm Switch cabinet 1.90 x 0.75 x 1.05 m Space requirement approx. 2.9 x 2.7 x 2.0 m

Condition: excellent (used), Universal milling machine SK 40 Table size 1300 x 300 mm X travel 750 mm Y travel 250 mm Z vertical travel 450 mm Cjdpfx Adjwxu Nwevohc Spindle mount vertical SK 40 horizontal SK 40

Condition: used, diameter div. Chjdpfx Aeww Nbxodvec number 40x tool adaptor BT 40

Condition: good (used), Year of construction: 1972, functionality: fully functional, overall weight: 1,200 kg, x- travel: 290 mm y-travel: 170 mm z-travel: 310 mm Milling spindle Cedpoxhhbpofx Advohc number of milling spindle turning speeds: 16 milling spindle turning speeds: 40-2000 U/min inner taper of milling spindle: ISO 40 max. diameter of the vice bore: 25 mm dimensions: 1066 x 1048 x 1330 mm

Condition: used, functionality: fully functional, Spindle: Speed range: 45 – 2800 rpm Spindle mount: 40 or Morse 4 Maximum spindle torque: 9000 kgcm Table: Clamping surface: 1250 x 250 mm Max. table load: 3200 kg Number of T-slots: 3 pcs, 14 mm wide Slot spacing: 55 mm Travels: Longitudinal: 810 mm Cross: 275 mm Vertical: 400 mm Automatic feeds: 14 – 900 mm/min Chedpfx Adsxg Icqevec Rapid traverse: up to 2800 mm/min Motors: Spindle motor: 4.2 kW Feed motor: 0.75 kW Other: Machine weight approx. 1800 kg Dimensions: length: 1900 mm, width: 1700 mm, height: 1700 mm

Condition: excellent (used), Shell end millsHinge cuttersHinge cuttersMake MitsubishiType SPX4R05034BT50NMLength 340 mm Chsdpfsd Hfi Uox Advjc

Condition: used, Year of construction: 2010, x-travel 2.600 mm y-travel 700 mm z-travel 700 mm control iTNC 530 Heidenhain turning speed range - main spindle 20 - 18.000 min/-1 power capacity - main spindel 35 / 25 kW tool taper SK 40 table surface area 2.900 x 700 mm max. table load 2.150 kg number of toolpositions 30 pos. tool taper SK 40 max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 300 mm max. tool weight 6,0 kg rapid traverse ( X / Y / Z ) 40 m/min feed speeds max. 40.000 mm/min Csdpfx Aev Dxxnedvshc feed power max. 8 kN total power requirement 54 kVA weight of the machine ca. 14,4 t dimensions of the machine ca. 8,0 x 5,6 x 2,8 m CNC - Travel Column Milling Machine DECKEL MAHO - DMF 260 New Design - NC dividing head (A-axis) - Operating hours: 18.709h spindle run - overhauld spindle installed (Dec 2023) - Z-axis weight compensation changed (Feb 2023) - Production package - Option: tool clamping for tightening bolts - WITHOUT vices!

Condition: good (used), Year of construction: 1972, functionality: fully functional, overall weight: 1,200 kg, x-travel: 290 mm y-travel: 170 mm z-travel: 310 mm Millung spindle number of milling spindle turning speeds: 16 milling spindle turning speeds: 40 - 2000 U/min Codpoxhhafefx Advjhc inner taper of milling spindle: ISO 40 max. diameter of the vice bore: 25 Vertical milling head inner taper of milling spindle: ISO 40 spindle turning speed range: 50 - 2.500 U/min max. diameter of the vice bore: 25 dimensions: 1.100 x 1.100 x 1.660 mm

Condition: excellent (used), Prism milling cutters Codpfx Adedwmnpevjhc Make Swiss franc & Orion 90 degrees 8 x 63 mm diameter 4 x ca. 100 mm diameter

Condition: used, diameter div. number 40x tool adaptor BT 40 Cedoww Nbljpfx Advjhc

Condition: excellent (used), 16 end mills with indexable inserts Cedpfsdx D Tvex Advohc Make Walter Weight 9.5 kg

Condition: used, diameter div. Cjdjww Nbrjpfx Advjhc number 44x tool adaptor BT 40

Condition: excellent (used), Milling Chuck Csdpfodx D Umox Advjhc Make Clarkson Type Autolock SK 50 1 x 6 mm 2 x 12 mm

Condition: used, diameter div. number 67x Codewpw E Aopfx Advohc tool adaptor SK 40