Used accessories and spare parts for milling machines for sale (285)

Condition: used, diameter div. number 75x tool adaptor SK 40 Nwsdpfxowpw E As Adbsc

Condition: used, diameter / mm Cutting (quantity) / 0 weight / kg length 1635 mm Nsdeymgbtspfx Adbewc

Condition: used, throat / mm Nwedpfx Adoymgacebjc tool adaptor HSK100 power requirement / kW

Condition: good (used), Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping angle: for workpiece clamping -Clamping surface: 1667 x 1300 mm -Wall thickness: 45 mm -T slots: slot width 18 mm -Dimensions: see photos -Dimensions: 1667/1000/H1400 mm Nwsdpfx Ashtn Sfsdbsc -Weight: 1548 kg

Condition: used, High-speed milling spindle HENNINGER type 814 / 5131 / 1:5 / 15000 Speed max. 15000 rpm at 70% ED Gear ratio 1:5 Power transmission up to approx. 2.5 kW Front dimension 110 mm (machine spindle to clamping nut) Tool holder MK4 with M16 tightening thread Collets type OZ16 Ø 6 / 8 / 9 / 10 / 11 / 12 / 12.5 / 13 / 14 mm dead weight 6.5 kg good condition Nedsf Axn Ujpfx Adbowc

Condition: used, High-speed milling spindle HENNINGER Type 801 - N 503 Maximum speed: 6,000 rpm at 70% duty cycle Gear ratio: 1:6 Nodpfx Adofxg T Uobewc Power transmission: up to 2.5 kW Projection: 110 mm (from machine spindle to clamping nut) Tool holder: SK 40- S20x2 Collets Ø 2 / 2.5 / 3 / 3.5 / 4 / 4.5 / 5 / 7 / 8 / 9 / 10 / 11 / 12 / 13 / 14 / 15 / 16 mm Supplied in a wooden storage case The head is equipped with bronze gears for high torque. Net weight: 5 kg Total weight: 9.4 kg Good condition

Condition: used, Slotting head for milling machine, milling head, CCCP / UDSSR STANKO type 1502 No: 200 Year of manufacture 1974 Stroke size: max. 60 mm Stroke rate: approx. 200 - 500 strokes/min. Tool holder: 12 x 17 mm with clamping plate Hole spacing machine flange plate: 245 x 185 mm Mounting hole: Ø 17 mm Centering diameter on the machine flange plate: 190 mm - Stroke size adjustable via eccentric adjustment - The drive is like the normal vertical head from the machine gearbox - Drive via driver, centric in the centering diameter Nwsdpfxed Dk A As Adbjc - Degree scaling on the flange plate +/- 45° steplessly pivotable - This grooving head is flange-mounted in place of the normal vertical milling head (mounting in place of the vertical milling head, milling head) Weight: 42 kg good condition Slotting head bearing number 58166 and vertical milling head bearing number 58164 from identical STANKO milling machine.

Condition: good (used), Measuring stand, tripod, dial gauge holder, dial gauge, test stand, dial gauge holder, precision measuring table, precision measuring table, micrometer holder, dial gauge stand, magnetic measuring stand, dial gauge stand - Dial gauge holder: with knurled nut mount Ø 8 mm -Item No.: T08043-0 -Hole spacing: Ø 112 x 7 mm -Number: 22x holders available Nwedsyiz Aqopfx Adboc Price: per piece -Dimensions: 130/38/H400 mm -Weight: 0.3 kg/piece

Year of construction: 2020, condition: good (used), Indexer, indexing gear, cam indexer, rotary table indexer, rotary indexing drive -Manufacturer: Candex, cam indexer -Type: RU45DFS-02-180-2RX-CN Nsdpfx Adsyilg Robowc -Shaft: Ø16 mm / 2x Ø14 mm -Translation: 1:2 -Dimensions: 160/150/H130 mm -Weight: 5.2 kg

Condition: excellent (used), Dimensions and price depending on dimensions for one each stair trestle : 95 mm high. 10 euro 140 mm high 12 Euro 185 mm high 15 Euro 230 mm high 20 Euro 275 mm high 22 Euro 320 mm high 25 Euro Nwsdpomn Ipujfx Adbsc

Condition: used, tool adaptor 88 Njdpjv Dxzcsfx Adbswc length 560 mm center height of top slides 65 mm weight 17 kg Counter holder / horizontal milling device for tool milling machine Deckel Mod. FP 1 consisting of upper beam and mounting of the milling arbor. The distance from the middle of the milling arbor to the lower edge of the counter holder is 65 mm, the width of the guide is 88 mm. Machine dealer with own stock of 1600 m².

Year of construction: 2018, condition: excellent (used), Spindle ISO 50 (DIN-69871-B) Nwsdpfxoyf Dp Eo Adboc Pull studs DIN-69872-B Clamping force 1900 daN Automatic B Axis 1.0 Degrees Automatic C Axis 2.5 Degrees Power 60/100 % 22/30 kW Speeds 60 - 3000 2 Speed Range Automatic lubrication (Air-Oil) Gear; ZykloPalloid, Klingelnberg-System, HPG-5 Qulaity-6 with DIN3965 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 1999, condition: used, 1 used main spindle drive and Mainspindle drive INDRAMAT RAC 3.5-150-460-L00-W1-220 Nwodpfxsdd Imdo Adbsc Siegfried Volz machine tools Rueschebrinkstr. 151-153 D-44143 Dortmund - Wambel

Condition: good (used), Clamping table, clamping angle, dividing head, rotary table, milling machine table, rotary dividing table -Rotary table: clamping surface: Ø 120 mm -Groove width: 14 mm -Dimensions: 210/160/H140 mm Nsdpfx Adowuybkjbswc -Weight: 5.7 kg

Year of construction: 1980, condition: good (used), Movable clamping table make WAGNER type: FE4000 year 1980 Travel : 4 000 mm table surface : 4000 mm X 1400 mm Feed rate : 8 - 2500 mm/min Rapid traverse : 4 m/min load capacity. Max : 12 500 kg Njdpfeg Uf I Ajx Adbewc Weight : approx. 12 000 kg In good condition. Hydr.clamping and worm drive

Year of construction: 1990, condition: good (used), Various collets and holders Approx.300 pieces. For DECKEL milling machines FP1 -FP2-FP3-FP4 Single sale demand inquiries. Njdpfx Adehvz Iiebewc

Year of construction: 1990, condition: good (used), CNC-4th axis NIKKEN type: CNC-200 year 1990 with counterholder and base plate. Nsdpsgabu Uefx Adbswc

Year of construction: 1980, condition: excellent (used), Milling spindlekpof Nwsdohvz Dxepfx Adbjc DECKEL for machines type: LB2 u.LB3 year 1980 Spindle holder ISO 40 Head in both sides + - 45 burr swiveling . In very good condition.

Year of construction: 2010, condition: good (used), 3.piece ball screw ( from HURON BAZ ) make SCHNEEBERGER Diameter 63 mm Diameter 50 mm Nodpfx Adoh I T Nrsbowc Diameter 40 mm In good condition.

Condition: good (used), Clamping table, clamping angle, dividing head, dividing head, rotary table, milling machine table, rotary indexing table, rotary table -Rotary table: Turntable Nwsdpfx Adeycfyajboc -Hole: Ø 32 mm -Dimensions: 320/280/H75 mm -Weight: 13.3 kg

Condition: good (used), Main spindle with drive motor, universal milling head, milling holder, milling extension, angle milling head, upper support, upper slide, dovetail guide, tool slide, cross table Nwedpokvrptsfx Adbec -Manufacturer: Mikron, upper support tool slide from CNC milling machine Mikron WF 51C/155 -Motor: AEG 380V 8 kW 1400/2850 rpm -Dimensions: see photos / technical. drawing -Dimensions: 1700/580/H700 mm -Weight: approx. 525 kg

Condition: used, - KESEL ARNO - Jaw width: 160 mm - Clamping range: 0 - 305 mm - Extended clamping range up to 365 mm - Weight: 50 kg - Hydraulically assisted - Overall height: 130 mm Nwsdpfsyl Shpex Adbjc - Overall length: 570 mm

Condition: not inspected (used), diameter / mm Cutting (quantity) / Njdpsxn Aqfjfx Adbswc weight / kg Spindeltyp: 195.6/S/48-7.7/20-1D/60HSK-A63 Ident-No.: 195.6/x000917B2 Milling spindle is sold as untested !

Condition: new, diameter / mm Cutting (quantity) / Njdpfx Aexn Aqlsdbswc weight / kg ROMAI Angle Head S10-SK50-HD20-C2F

Condition: new, diameter / mm Cutting (quantity) / weight / kg Rotor type: rotor FK.213.570 11 05.01 MAT number: 000.213.570 Condition: new Nedpfx Aou Dbz Aodbjwc incl. test report