Used Forging Manipulators for sale (492)

Condition: ready for operation (used), Romanian CFL 5000 Nominal weight of falling part – 5000 kg Max. stroke – 1700 mm Impact energy – 17000 kg-m Daylight between columns – 3900 mm Lasdpoy Ud N Ssfx Amrec Number of impacts – 40/min Weight approximately 170 tons Video showing the machine in operation available! Romanian CFL 3150 Nominal weight of falling part – 3150 kg Max. stroke – 1250 mm Impact energy – 80 kJ Daylight between columns – 4000 mm Number of impacts – 45/min Weight approximately 87 tons Video showing the machine in operation available!

Condition: good (used), Year of construction: 2021, Remote control with frequence Foot switch control with frequence Load capacity per section:1,5T Vessel range Minimum: 200 Vessel range Maximum: 1500Ø Variable rotation: 80 - 950Rpm No of wheels per section:2 Wheel dimensions: 200 x 100Ø x mm Length: 1010mm Lodpfx Amswvq Rljreac Width: 350mm Height: 457mm Weight: 200kg

Condition: excellent (used), Year of construction: 2021, Table Ø: 1000mm Table load on 200 mm:600 Table load on 400 mm:400 Table load on 600 mm:280 Table load on 1000 mm:200 Laodpfx Amewvrbfjrsc Rotation table: 360.000° Length: 1200mm Width: 1200mm Height: 1400mm Weight: 1200kg

Condition: excellent (used), Year of construction: 2012, functionality: not functional, machine/vehicle number: 1241183, Dalmec balancer system, type PEC, with a maximum lifting capacity of 150 kg and a pivoting arm design on a column. Specifications: Brand: Dalmec Type: PEC Serial number: 1241183 Year of manufacture: 2012 Maximum lifting capacity: 150 kg Pressure: 0.80 MPa Features: Column with base plate Pivoting arm Laedpezd Erqefx Amroc Control panel (Dalmec) Condition: used

Condition: good (used), Tehac welding manipulator table Diameter bed: 480 mm Ljdpfx Aoldg S Iomroac Height max: 113 cm

Condition: good (used), Forging equipment/power hammer from a vocational training center Lsdpfx Ajzbiqtsmrsac Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: refurbished (used), Automatic line for forging / hot stamping Installed after refurbishing in 2015 and having run for not more than 1,000 hours, condition is excellent. ➢ ADIGE CM 500 AUTOMATIC SAW ➢ 50 KW INDUCTION OVEN ➢ ELECTRONIC AUTOMATION SYSTEM ➢ VACCARI SCREW PRESS 180 screw diameter ➢ 10-POINT AUTOMATIC LUBRICATION SYSTEM ➢ BALCONI 50T TRIMMING PRESS ADIGE CM 500 AUTOMATIC SAWING MACHINE WITH 3.5-METER AUTOMATIC BAR LOADER Technical specifications: Lodpfx Aezcdluemreac -Min./max. cutting capacity: 8 mm / 60 mm diameter -Standard cutting speed: ADIGE SALA. -Head motor power: (50 Hz) 2.2 kW -End-of-bar scrap equal to or shorter than the usable piece -Central hydraulic tank capacity: 200 liters -Cutting emulsion tank capacity: 50 liters -Weight: approx. 1,200 kg -Siemens electrical components 50 kW INDUCTION OVEN WITH 1 INDUCTOR (8–20 mm) with ELECTRONIC LOADING ARM For horizontal and vertical loading of work pieces Features a brushless motor, programmable axes, and press interpolation with electric axes; electronic components: Siemens Load capacity: 4 kg; vertical stroke: 80 mm; power supply: Electro-pneumatic VACCARI SCREW PRESS 180 screw diameter Technical specifications: -Screw diameter: 180 mm -Theoretical pressure: 300 tons -Table dimensions: 430 x 550 mm -Slide dimensions: 500 x 650 mm -Ram stroke: 350 mm -Distance between uprights below the guides: 450 mm -Distance between uprights within the guides: 350 mm -Max. height between table and ram: 650 mm -Strokes per minute: 35 -Table height under the guides: 300 mm -Main motor: hp 30 -Machine dimensions: 4100 x 2600 x 2200 mm -Approximate weight: 11,000 kg NEW SIEMENS S7 ELECTRICAL SYSTEM NEW PNEUMATIC SYSTEM NEW LUBRICATION SYSTEM BALCONI 50T TRIMMING PRESS Technical specifications: -Power: 50 tons -Table dimensions: 800 x 500 mm -Ram dimensions: 440 x 380 mm -Max. die height: 400 mm -Adjustable stroke: 100 mm -Strokes per minute: 35–100 -Main motor power: 5.5 kW

Condition: used, Year of construction: 1980, pressure . t total power requirement . kW weight of the machine ca. . t dimensions of the machine ca. . m An entire forging plant in Germany is for sale. Includes: Banning forging hammers (10–50 hundredweight); Dango and Dienenthal HSM 12 manipulators; Merz bogie-hearth furnace, hood-type furnace, etc.; wedge- ram spare parts, etc.; mechanical workshop; oil storage facility. The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team Lasdpfx Aszfwt Aomrsc

Condition: used, Year of construction: 2001, functionality: unexamined, load capacity: 600 kg, Dalmec MXF Ceiling Balancer-Manipulator Lajdpfx Amsv Diiderjc Manufacturer: Dalmec lifting systems Model: Dalmec MXF Manufactured: 2001 Lift capacity: 600 Kg Pressure: 0.90 MPa

Condition: excellent (used), Year of construction: 2011, pivoting range: 360 °, Welding manipulator SARTORE - PTA 12000 MACH-ID 9321 Make: SARTORE Type: PTA 12000 Year: 2011 Vario matic Rotation / Angle Remote control with Dro Very littles used incl. 2000 mm false chuck  CE-Marked  Table Ø: 2000mm Table load on 50 mm: 12000 Table load on 200 mm:10000 Table load on 400 mm:6600 Table load on 600 mm:4500 Table load on 1000 mm:3500 Rotation table: 360° Lifting chuck: 0 - 135° Ljdox H Rhxspfx Amroac Table rotation: 0,02 - 0,4U/mm Length: 2980mm Width: 1980mm Height: 1800mm Weight: 6000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Severt L manipulator, 4 units, lifting capacity of 1000 kg and 2000 kg, price per unit. PRODUCT TYPE: S10 TYPE CODE: S10.1-1HH 1000kg / 2000 Kg LIFTING CAPACITY (KG): 1000 / 2000 Kg STROKE (MM): 1000 ARM LENGTH (MM): 1500 / 2000 BENDING MOMENT Ljdpfx Aezbl Sgomreac CLAMPING PLATE (NM): 1400 BENDING MOMENT ARM (NM): 3000 FREQUENCY CONVERTER: yes LIFTING DRIVE: hydraulic SELF-WEIGHT (KG): 1700

Condition: ready for operation (used), Year of construction: 2016, load capacity: 1,400 kg, Glass lifting robot KS Robot 1400 Year of manufacture: 2016 Lasdpfx Amjyir Azsrsc Width: 1310 Length: 3350 Height: 1700 mm Maximum lifting capacity: 1400 kg with wireless remote control DGUV inspection valid until July 2025 This offer is exclusively for commercial businesses as defined in §14 of the German Civil Code (BGB).

Condition: new, Year of construction: 2018, machine/vehicle number: DF0163, pressing force: 800 t, pressure:800 t distance between columns:1200 mm stroke:500 mm total power requirement:85 kW weight of the machine ca.:40 t dimensions:4100 x 3500 x 6650 mm draw back pressure:80 t Master cylinder:1 Stück Ljdpfx Amodxvfpsrsac column diameter:250 mm dayligth:1000 mm Table dimensions:1300 x 1100 mm ram surface:1300 x 1100 mm :800 mm table height over floor:950 mm table load:5 t pre-running speed:250 mm/sec return speed:150 mm/sec :1000 l :10 mm/sec :inbegriffen ? :inbegriffen ? :inbegriffen ? :inbegriffen ? :inbegriffen (800 x 530mm) ? :inbegriffen (800 x 530mm) ?

Condition: used, Year of construction: 1983, nominal force 2500 t stroke 600 mm cycle time 13 - 18 s distance between columns 1720 mm Distance table/ram, max. stroke up, adjustment up 2600 mm table surface area 1720 x 1800 mm allowed max. force 4000 t blow die to die 5000 t ram surface 2100 x 1320 mm Lasdpfx Ajyx Inajmrsc capacity of ejector in table 40 t ejector stroke in table 250 mm ejector surface area in table 900 x 820 mm capacity of ejector in ram 6 t ejector stroke in ram 40 mm spindle diameter 425 mm power requirement 900,0 kW weight 335,0 t Dimensions (WxDxH) 3,4 x 4,6 x 9,7 m height over floor 8,3 m fully automated forging line / spindle press with automation for the production of flanged shafts for hot forming only with reversible AC motor, pneumatic brake, plate ejector in table (40 t / 250 mm), ejector in ram (6 t / 40 mm), lifting device for repositioning, marking, tool change, insertion device, tilting device, loading and unloading arm, rotary table, circular oil lubrication, centralised grease lubrication cycle time approx. 13 - 18 s as is where is, WITHOUT putting into operation

Condition: used, Year of construction: 1961, ram hammer weight 750 kg ram hammer stroke 660 mm Laedpfx Aevuullsmrec no. of strokes 100 /min impact energy 2040 kJ distance lower die block / ram gudeway 6600 mm Throat 750 mm steel forging - rectangular up to 240 mm steel forging - diameter up to 270 mm power requirement 75,0 kW weight of hammer 16,5 t weight of anvil 15,5 t weight 32,0 t dimensions (WxDxH) 3,2 x 1,45 x 3,45 m Forging hammer video at seller's site before dismantling available

Condition: like new (used), functionality: fully functional, machine/vehicle number: 12148-PA44-0001/2665, Never used, VAT gate valve with 6 mounths warranty. The size is DN 250. We have 2 pcs on stock. We attached the user manuals, so you can check all neccessary information. Laodpfx Ajzfiahomrec

Year of construction: 2000, condition: used, 400 TON HYDROMEC HF4000 NON-FERROUS HOT FORGING PRESS LINE MANUFACTURER - HYDROMEC YEAR - 2000 SERIAL NUMBER - 660 MODEL - HF4000 C/D MATERIAL - NON-FERROUS TONNAGE - 400 TON (4000 KN) STROKE - 380MM STROKE PER MINUTE (CONTINUOUS) - 22-35 STROKE PER MINUTE (SINGLE STROKE) - 22-45 RAM ADJUSTMENT RANGE - 100MM CLEARANCE (STROKE TO BOTTOM, ADJUSTMENT TO TOP) - 865MM SIZE OF TOOL MOUNTING PLATE - 1000MM X 1000MM MAIN PRESS MOTOR - 59 KW MAIN MOTOR RAM ADJUSTMENT - 2.2 KW CUSHION FORCE - 70 TON (700 KN) CUSHION STROKE - 40 - 110MM INCLUDES: Lajdpfx Amszad Nhorec AUTOMATED PICK AND PLACE ROBOT FULLY AUTOMATED SLUG LOADING STATION WITH FURNACE/CONVEYANCE MAESTRI C.T. 3500 4 TRACKS SLUG FURNACE (NEW 2000) , 420 KW POWER. NATURAL GAS, 950 DEGREES CELCIUS ELECTRICS PRESS CONTROLS

Condition: refurbished (used), Year of construction: 1974, functionality: fully functional, machine/vehicle number: 1276, CNC Hot Radial Forging GFM SX-13 New in 1974 / 2022 New control system PLC SIEMENS S7 Machine number: 1276 No. of Hammers: 4 Lasdpfxoq U R T Ns Amrsc Forging force each hummer: 160 Ton Hammer stroke / min: 700/min Hammer lenght: 240 mm Diameter setting range: 80 mm Maximum forging diameter: Structural steel, round-cross section: Ø 130 mm square cross section: Ø 115 mm Smallest dimensions forged: Ø 25 mm Manipulator A max. displacement: 6820 mm Manipulator B max. displacement: 7150 mm Maximum workpiece length: 6000 mm Rapid speed manipulator: 400mm/sec Total connected power: 300 kW 380 V, 50 Hz Machine dimensions: Forging height over floor: 615 mm Total height pf the machinr over floor: 1665 mm Total machine lenght: 32670 mm Total foundation lenght: 33400 mm Tot. machine width (without auxliary equipments): approx 3885 mm Total foundation width: 16000 mm Total weight of the machine: 84.000 Kg

Condition: refurbished (used), functionality: fully functional, Cold Radial Forging Machine GFM SX-10 YOM: 1971/2024 CNC: Siemens SINUMERIK ONE with PLC 1500 Forging Box Lajdpfx Ameq U R Rusrjc Number of forging hammers 4 Max. forging force per hammer 1250 kN Number of strokes 1200 1/min Hammer lenght 135 mm Diameter setting range 60 mm Forge eccentric 3,5 mm Chuck head Clamping force max. 50 kN Advance speed max. 20000 mm/min Stroke 1290 mm Workpiece rotation 35-71 1/min Workpiece lenght max. 900 mm Counter holder Clamping force max. 50 kN Advance speed max. 20000 mm/min Stroke 1290 mm Mandrel Clamping force max. 20 kN Advance speed max. 18000 mm/min Stroke 800 mm Dimensions Lenght approx: 9100 mm Width (with electrical cabinets and control panel) approx.: 4500 mm Height forging machine approx.: 2150 mm Forging height above floor: 1250 mm Weight (forging machine) approx.: 29000 kg The machine is completely revamped with a new Electrics, Hydraulics, new Control and with functionality test before delivery.

Year of construction: 1974, condition: refurbished (used), functionality: fully functional, machine/vehicle number: 1293, CNC Radial Forging Machine GFM mod. SX-16 Manufacture: GFM (Austria) YOM: 1974 / 2022 Model: SXL-16 Machine number: 1293 PLC: Siemens S7 - Technology V4.2 with CNC Bosch Rexroth XM Numbers of Hammers: 4 Forging force: 800 Ton (200 t per Hammer) Strokes per minute: 580 Hammer length: 320 mm Maximum hammer setting scope - calculated by diameter: 100 mm Maximum diameter of forging regarding: - structural steel: circular cross section – Ø 160 mm square cross section – 130 mm - high alloy steel: circular cross section – Ø 120 mm square cross section – 100 mm Extreme quadrangle: 12 x 120 mm Maximum length of forging: 6000 mm Min and Max diameter of mounting in manipulator: 30 - 160 mm Feed of manipulator A: 6800 mm Feed of manipulator B: 7200 mm Passage through manipulator: Ø 130 mm Lajdoq U Sa Sspfx Amrsc Manipulators speed in fast move: 400 mm/s Feed speed of manipulators (stepless adjustment): 10 ÷ 115 mm/s Cooling water pressure: 3 ÷ 5 bar Temperature of inlet water: max. 30˚C Cooling water consumption: 34m3/h Pipe diameter for cooling water: 2” Compressed air pressure: min. 5 bar Pipe diameter for compressed air: Ø20 mm Consumption of compressed air: 1,5 Nm3/h Power supply (nominal power): 350 kW Motor voltage: 500 V Control voltage 220 V Power of main engine: 200 kW Power of pump motors: 185 kW Power of manipulators motors: 2 x 22 kW Dimensions of the machine Axis height of forging above the hall level: 750 mm Maximum height of machine above the hall level: 2.050 mm Maximum length of machine on the hall level: 33.740 mm Foundation length: 34.200 mm Maximum width of machine on hall level without loading equipment: 4350mm Foundation width: 15.600mm Machine net weight: 124.490 kg

Condition: good (used), blacksmith's vise, bottle vise, anvil vise, anvil, blacksmith's anvil, bench vise, locksmith's vise, parallel vise Lajdpfedl E Irjx Amrsc -Jaw width: 135 mm -Wingspan: 150 mm -Number: 9 vises available Price: per piece -Dimensions: 450/160/H900 mm -Weight: 35 kg

Condition: used, We offer for sale manipulators (new) as well as used single axes, accessories, and wiring. Delivery term: EXW Trstena Lasdpfsyc Rv Tox Amroc Minimum order value: €5,000

Condition: used, Year of construction: 2019, Pressure total: 1000 ton Stroke: 170 mm Shut height (stroke down, adjustment up): 490 mm Slide adjustment: 16 mm Max. stroke rate: 32 s.p.m. Table surface area : 800x800 mm Ram surface: 825x860 mm Free frontal opening L-R: 900 mm Upper ejector stroke: 16 mm Upper ejector capacity: 10 ton Lower ejector stroke: 80 mm Lower ejector capacity: 32 ton Dimensions L x W x H: 2950x1950x4090 mm Machine weight: 26 kg Main drive: 33,5 kW Standard configuration PRESS :original mechanical parts all other components are European brands and standards (lubrication, electrical, pneumatic...) Lsdeywztgjpfx Amrjac Extended machine accessories Full line ready to produce including : *New AMIDEC (France) 2 axis transfer arm, equipped with: 2 grippers for the handling of billets1 nozzle for cleaning and lubrication of forging tools *New Induction s.r.l. (Italy) heater 200kW designed to heat carbon steel billets diameter 24 to 75,5mm, length 22,1 to 33,1mm. 700 to 800°CScope of supply of the heating systemA/ M.F. Static converter model IHFT 200 K4B/ Frame for the M.F. capacitors and inductorsC/ automatic loading system for disc-shaped billets with reversible box- Tilting box- Storage conveyor- Vibrating bowl- Command and control cabinet- Steel support - Soundproof cabineD/ 1 system for the introduction of the billets to the inductor and 1 system for exit of the billets.E/ Inclined inductor length 1200mm with inox pipe F/ 1 automatic inductors exchange double version (for 2 inductors)G/ 1 optical pyrometer H/ 1 integrated dry supply transformerI/ PLC Siemens S1500 installed on the converterJ/ Cooling system  Tools

Condition: ready for operation (used), Perforated plate Manufacturer unknown Dimensions: 1500x1500 mm Working height: 940 mm – height adjustable Ljdpfxofpgp Eo Amrjac Feet are screwed on Plate thickness: 110 mm Hole diameter: 45 mm Weight: approx. 2.0 tons

Condition: used, Year of construction: 2017, Manufacturer: Manut LM Model : MAN Year: 2017 Body type : Vacuum Tube Manipulator Application : Handling of bags and boxes Laedpfxex R A Nvo Amroc Maximum load : 30 kg Classification: ATEX Vacuum pump : Becker SV 8 400/2 Dimensions : see photo drawing.