Milling mach.-univ.NC/CNC 700-999mm x-tr. for sale
Identified location: (US) (Edit)
|
5
* 22-fold tool changer
* CNC-control by DR. HEIDENHAIN TNC 407
* appr. 43,521 h machine on (not spindle hours !)
travel X/Y/Z = 900/630/500 mm
table = 1,200 x 600 mm
milling head swiveling = +/- 90°
spindle fixture = ISO 40
spindel speeds = 20 - 5,000 rpm.
Nuaez
feeds x and Y/Z - axis = 2 - 10,000/2 - 8,000 mm/min.
main power = 7.5/9 KW
4.5 tons - L/W/H = 4/3.3/2.5 m more
|
|
6
Control: Maho 134 /Heidenhain
travels : X/Y/Z axis: 800/500/550 mm
Feed rate X/Y/Z : 1- 3000 mm/min
Rapid traverse : X/Z(Y) 5000 mm/min , Z(Y) 6000 mm/min
Speed range: 31.5 - 4000 rpm
Tool holder : SK/ISO 40
drilling sleeve stroke : 80 mm
Angular table Clamping surface : 1100 x 600 mm
workpiece weight : 500 kg
Weight: approx. 3900 kg
Bg9wzso2qd
Dimensions: approx. 3.7 x 3.6 x 2.1 m
Machine is for sale in the sales order.
All information without guarantee. more
|
|
5
|
|
7
x-travel 870 mm
y-travel 370 mm
Cstk2yavs
z-travel 400 mm
table surface area 1370 x 310 mm
tool taper ISO 50
spindle turning speed range (12) 40 - 1740 rpm
feed - longitudinal/cross 15 - 1200 mm/min
rapid traverse longitudinal and cross 3,4 m/min
feeds vertical 7,5 - 600 mm/min
rapid traverse vertical 1,2 m/min
main drive 5,5 kW
range L-W-H 1,92 x 2,21 x 1,75 m
weight of the machine approx. 2,7 t more
|
|
5
x-travel:700 mm
y-travel:450 mm
z-travel:500 mm
control:Philips 432 CNC
tool taper:SK 40
speeds:20 - 3150 U/min
feed:1 - 3000 mm/min
Bdvams27ti
rapid travel x/y/z:6000 mm/min
table load:0,6 t
table-size:900 x 500 mm
total power requirement:36 kVA
weight of the machine ca.:3 t
dimensions of the machine ca.:3,3 x 3,0 x 2,6 m more
|
|
3
x-travel 800 mm
y-travel 450 mm
z-travel 400 mm
table surface area 1385 x 305 mm
spindle taper SK 40
quill stroke 200 mm
spindle turning speed range 50 - 3500 U/min
Beohmag02b
control HEIDENHAIN
control TNC 155
total power requirement 5,8 kW
weight of the machine ca. 2,5 t
dimensions 2,25 x 2,0 x 2,4 m
Accessories: electron. handwheeel, coolant more
|
|
x-travel:800 mm
y-travel:630 mm
z-travel:500 mm
feed stepless:1-7500 mm/min
rapid traverse feeds:7500 mm/min
tool cone:40 ISO
spindle drive motor:10 kW
turning speed range - spindle:20-4000 U/min
Cppmloig
Torque of spindles:630 Nm
total connected load:25 kW
weight of the machine ca.:5 t
dimensions of the machine ca.:15 qm
100 % before loading
warranty:
none
The machine is in very good condition (only one prior owner), only few operating hours. Machine was installed first time and equipped wit... more
|
|
1990
used
x-travel 850 mm
y-travel 630 mm
z-travel 500 mm
table surface area 1200 x 560 mm
tool taper SK 40
spindle drive 12 kW
turning speed range - spindle 25 - 4200 U/min
stroke of quill vertical 95 mm
numbers of positions in the tool changer 32
wotkpiece diameter with 2 vacant positions 125 mm
Paj9myard
workpiece diameter at full load 100 mm
workpiece length 250 mm
weight of tools max. 6 kg
feed speeds 1 - 5000 mm/min
rapid traverse 10 m/min
Dimensions (L/W/H) 4,3x3,4x2,3 m
total power requirement ... more
|
|
5
Producer: MEZ Židenice
GR: 2019
Bh32jwb3
Replacement of gears, wheel cone, bearings and seals in 2019.
Table clamping surface: (width x length) 250x1250 mm
Longitudinal table movement: 800 mm
Lateral movement of table: 275 mm
Vertical movement of table: 350 mm
Ground area of the machine: 1900x1760 mm
Machine weight: 1550 kg more
|
|
14
Brand: SHW
Type: UF 21
Year of birth: 1980
machine no. 21277
Control: SHW
Recording: SK 40
Main drive: 4,9 kw
Total connected load: 12 kw
Universal table tilting, inclining and 360 o rotating: 1400 X 650 mm
Work area:
X: 800 mm
Y: 550 mm
Z: 400 mm
Milling head +-90 o swivelling.
Xsbspyyf
Infinitely variable feeds: 5-2000 mm/min
Rapid traverse horizontal: 4000 mm/min
Rapid traverse vertical: 2000 mm/min
Spindle speeds: 36-1800 rpm
Installation weight: 5000 kilo
Installation dimensions: 2200 X 260... more
|
|
6
x-travel: 850 mm
y-travel: 630 mm
z-travel: 500 mm
control: Heidenhain TNC 426
spindle taper ISO: SK 40 DIN 69871
quill stroke vertical: 110 mm
turning speed range: 20 - 529 / 530 - 1440 / 1441 - 5000 / 3 step U/min
spindle head swivable left - right: +/- 75 ° °
feed:: x+y+z: 1 ... 2000 manuell mm/min
feed:: x+y+z: 1 ... 10 000 programmierbar
Tool changer: HTC mit 34 Stationen
rapid traverse: 10 m/min
Table dimensions: 1200 x 550 mm
table:: starr
spindle hours: ca. 11 000 h
operating hours - idl... more
|
|
5
control Heidenhain iTNC 530
travel -x axis 880 mm
travel -y axis 630 mm
ja
travel -z axis 630 mm
main spindle
20 - 12.000 min/-1
main spindle drive power 15 / 10 kW
max. torque on the spindle 130 Nm
tool taper SK40
controlled NC swivel milling head (B-axis) inkl. hydr. Klemmung
handwheel elektr. iTNC 530
work table:
table surface area 1.250 x 700 mm
table load 1 t
tool magazin:
tool change unit pick-up-System
toll turrets 32 / 2 x 16 Plätze
Rl8t8ihp
tool taper SK40
tool diameter 8... more
|
|
3
Length of the working table: 800 mm
Bg2wsdbdn0
Width of the working table: 500 mm
Power of the spindle drive: 5 kW
Minimum rotary speed of the vertical spindle: 22 1/min
Maximum rotary speed of the vertical spindle: 2000 1/min
Travel length X-axis (mechanical feed): 700 mm
Travel length Y-axis (mechanical feed): 620 mm
Travel length Z-axis (mechanical feed): 650 mm
Total power demand: 11 kW
Taper: ISO 50
Machine height: 1900 mm
Machine length: 1550 mm
Machine width: 1800 mm
Machine ... more
|
|
x-travel 710 mm
y-travel 600 mm
z-travel 445 mm
CNC-control DIALOG 11
spindle taper ISO 40
spindle turning speed range 18 - 6300 U/min
table-size Ø 630 mm
table load 435 kg
feeds -stepless- 2 - 6000 mm/min
power capacity 9,5 kW
quill stroke 80 mm
coolant
voltage 380 V
total power requirement 20 kVA
weight of the machine ca. 4,8 t
dimensions of the machine ca. 2,15 x 3,80 x 2,40 m
electric cabinet 1,60 x 0,70 x 1,25 m
- Serial-No.: 2823-3054
- control: DIALOG 11
Beol870qoo
- with 4. Axis N... more
|
|
5
x-travel:700 mm
y-travel:450 mm
z-travel:500 mm
Bdnedepf3w
control:Philips 432 CNC
tool taper:SK 40
speeds:20 - 3150 U/min
feed:1 - 3000 mm/min
rapid travel x/y/z:6000 mm/min
table load:0,6 t
table-size:900 x 500 mm
total power requirement:36 kVA
weight of the machine ca.:3 t
dimensions of the machine ca.:3,3 x 3,0 x 2,6 m more
|
|
1
2018
as good as new (ex-display)
Machine is in the exhibition. M760 Premium CNC milling machine directly from the manufacturer.
M760 - The premium CNC milling machine with Fanuc 0IMF control is characterized by power, speed, precision and long life.
Heavy execution
High productivity
Linear guides for high rapid traverse speeds in all axes
24-fold magazine tool changer (double arm gripper)
High reliability
Nuce2
Castings made of quality Meehanite cast iron
Cross table precision ground with 4 T-slots
Heavily ribbed, torsion-free... more
|
|
5
x-travel 800 mm
y-travel 600 mm
z-travel 400 mm
Control RÖDERS RMS 6
table-size 900x700 mm
max. workpiece weight 800 kg
tool change unit 30-fach
turning speeds 36.000 U/min
0 17 kW
spindle taper HSK 50
total power requirement kW
weight of the machine ca. 13 t
dimensions of the machine ca. 3,1x3,0x3,2 m
Operating hours: approx. 65,000 h
tool measuring laser
Byeahqmk
Minimum quantity lubrication
chip conveyor
FISCHER Spindle MFW 1412/36
3D button automatically
Saugluftrückführung
Oil and em... more
|
|
5
Traverses X Y Z: 770 x 490 x 440mm,
Table 1372 x 356mm,
Spindle speed 5000 rpm,
Ekdsajh
Spindle taper ISO40,
Spindle Motor 3.75kW,
ProtoTRAK SMX Control, low volt light, interlocked guards, coolant. more
|
|
11
GO 2011
Control system:
HAIDEINHAIN TNC 145
Nkxpv
Table: 960 x 340 mm
Travel distances:
X: 760 mm
Y: 370 mm
Z: 125 mm more
|
|
6
1990
excellent (used)
The machine is in good condition and runs perfectly.
It was also regularly maintained.
Control: Heidenhain TNC 415
tool changer: 32-fold / SK40
Year of construction: 10/90
Travels:
Bg30xavtpe
X : 850
Y : 630
Z : 500
spindle speed: 25-4200 rpm
rapid traverse: 10m/min
Documentation
New: regulator, Z-axis clutch and toothed belt, oil hoses, water hoses
Additionally are offered: Vices, tools, CAM software more
|
|
5
x-travel:900 mm
y-travel:630 mm
z-travel:500 mm
table surface area:1.200 x 600 mm
control:TNC 415 HEIDENHAIN
turning speeds:15 - 4.000 1/min
transmission ratio:2
rapid traverse longitudinal and cross:6 m/min
rapid traverse vertical:4 m/min
tool taper:SK 40
table load:700 kg
dist. milling spindle - table surface:65 - 565 mm
spindle:10 kW
quill stroke:100 mm
total power requirement:22 kW
weight of the machine ca.:4,5 t
with cabin,
universal milling head,
RENISHAW electr. measuring system !
div... more
|
|
2018
as good as new (ex-display)
Machine is on display and was used for demonstration purposes only. Optimill FU5-600 HSC15 CNC 5 - axis simultaneous machining center directly from the manufacturer.
Optimill FU5-600 HSC15 - The OPTIMUM Premium CNC milling machine with Siemens control SINUMERIK 840D SL is characterized by power, speed, precision and long life.
Heavy execution
High productivity
Tool changer double-arm gripper with 32 tool places in standard scope of delivery
Heidenhain glass scales - additional measuring system e... more
|
|
10
Technical data:
Work area:
Travel in X/Y/Z: 750 / 550 / 500 mm
Distance spindle nose table: 70 - 570 mm
Number of axes (basic machine): 3
Bfv3zpbqkq
Rapid motion speeds in X/Y/Z: 30 m/min
Work feed X/Y/Z: 30 m/min
Clamping area: 900 x 630 mm
Max. table load: 800 kg
Tool change:
Number of tool stations: 30
Max. tool diameter: 80 mm
Milling spindle:
Max. speed: Mechanical spindle 12.000 rpm, Motor spindle 15.000 rpm
Max. torque: Mechanical spindle (S6) 100 Nm, Motor spindle (S6) 100 Nm
General dat... more
|
|
2
|
|
6
CNC universal milling machine lid MAHO DMU 70
With contouring MILL PLUS iT
Year of construction: 2008
Traverse paths: X 750 Y 600 Z 520
Speed range: 20 – 14,000 rpm continuously (SK 40)
With the following accessories:
Rotary table with digital drive Ø 800 mm x 620 mm
Transformation of levels of
3D measuring probe
Mode 3 + 4
Signal lamp 4 - colored
Vertical tool changer with 30 magazine places (SK 40)
IKZ 40 bar
Chip conveyor
Rotoclear
Tool length measurement (BLUM)
Sealing air for linear meas... more
|
|
11
Traverse paths (x,y,z) : 800 x 550 x 500 mm
table size universal table : 750 x 520 mm
Speed : infinitely variable 32 - 5000 rpm
Control : Dialog 12
tool holder : SK 40
Machine weight : 4500 kg
incl. chip conveyor and electronic hand wheel
complete documentation including parameter diskette
complete technical data : see pdf-document !
9qunihi more
|
|
2
Control: HEIDENHAIN TNC 155
Travel paths: X = 700, Y = 550, Z = 500 mm.
Spindle speed: 25 - 3150 rpm, 3 gear stages.
Bgugjmsk2t
Spindle mount: SK 40 with hydr. Tool clamping.
Angular table, clamping surface: 480 x 1000 mm.
Universal swivel milling head with drilling quill, stroke: 80 mm. more
|
|
2017
as good as new (ex-display)
Machine is on display and was used for demonstration purposes only. Optimill F 150 HSC Premium CNC milling machine directly from the manufacturer.
F 150 - The OPTIMUM Premium CNC milling machine with Siemens control SINUMERIK 828D is characterized by power, speed, precision and long life.
Heavy execution
High productivity
Linear guides for high rapid traverse speeds in all axes
24-fold magazine tool changer (double arm gripper)
High reliability
Castings made of quality Meehanite cast iron
Cross... more
|
|
5
1987
good (used)
Control type CNC HEIDENHAIN TNC 150
Tool holder 32SF
3qchsplmy
Spindle speed range 5600U/min
Spindle motor 6KW
Total power demand 17KW
Feed range l-8000/4000 mm/min
Drilling capacity (steel) 30 mm
Rapid traverse rate 8 / 4 m
Traverse path x way 850 mm
Y way of travel in 420 mm
Z way of travel in 210 mm
Drilling head Z1 off 540 mm
a-axis 360 ° (0.001)
Machine weight approx. 3000 kg
Machine documents available
Negotiable shipping possible, bear the cost of the buyer more
|
|
1
|
|
7
1988
good (used)
Table: 630 mm,
Ways:
x = 700 mm ,
y = 600 mm horizontal,
z = 500 mm vertical,
Spindle speed: 20 - 6300 rpm,
Spindle holder: SK 40,
Spindle drive: 10.0 kW,
Comment:
Bfbvb8pzvc
36-fold tool changer,
Coolant device with additional high-pressure pump,
Conveyor
12 tool holders SK40 with tool,
"new spare parts worth net 11,000,- Euro included",
Weight:
5800 kg more
|
|
9
KITAMURA Mytrunnion-5 CNC 5 Axes MC
YoM = 2009
Fk3tw2v
Controller Kitamura FANUC 16 MB
Travels =
X= 815 mm
Y= 745 mm
Z= 500 mm
A = 150 degree (-120 till + 30 degrees)
C = 360 degrees
Table = 630 mm x 500 mm
Spindlespeed = 20 – 20.000 rpm
Taper = BT 40 – BIG PLUS
Inner coolant through spindle
Automatic gear box 4 ranges
Spindlemotor = AC 13 kW
Rapid feed = X/Y/Z = 50/50/25 m/min
Rapid feed A axe = 2.000 degrees/min
Rapid feed C axe = 6.000 degrees/min
ATC 50 tools
Renishaw touch probe
Chip conve... more
|
|
15
BERNARDO MFM 250 3 axis metal milling machine
Manufacturer BERNARDO
MFM 250 machine model / type
Production year 2007
Machine category Milling machine
BERNARDO MFM 250 universal milling machine with digital 3 axis reading.
Gxtebzd
Drill milling machine MFM 250 is a multifunctional machine with a huge spectrum of possibilities. Automatic feed of the spindle and table in 2 axes together with the digital display, stepless regulation. speed, pneum. handle, rotary head on three axes (right / left, t... more
|
|
3
Universal milling machine Maho MH-C700
3-axis digital display Heidenhain
Technical data:
ᐳᐳ Turn-tilt swivel table with Heidenhain digital display
ᐳᐳ Speed: 50 to 2500 rpm
ᐳᐳ Feed infinitely variable in 3 axes from 0 to 1000 mm/min
ᐳᐳ Drive power .10,5 KW
ᐳᐳ Travel X/Y/Z: 600/400/400 mm
ᐳᐳ Vertical quill and horizontal quill 80mm extendable - SK40
O3nqe0mt
ᐳᐳ Hydraulic tightening system
ᐳᐳ Weight approx 2300 Kg
ᐳᐳ Dimensions length 1.95 m, width 2.6 m, height 2.2 m more
|
|
4
2000
good condition (used)
Sofort aus CH Universität frei :
Heckert Chemnitz Cycle controlled universal milling machine
Type EH 1250 - MU
Baujahr 2000
Siemens SPS Zyklensteuerung
Betriebsstunden ca. 1000
Tisch 1250 x 315 mm
Bgs2c2tx8u
Verfahrwege X / Y / Z 880 / 300 / 535 mm
Spindelaufnahme SK 40
Spindeldrehzahlen 24 - 2000 U / min
Schwenkbarkeit des Fräskopfes 360 Grad
Tischbelastung 1000 kg
Antriebsleistung 7,5 kw
Universalfräskopf
Gegenhalter
SK 40 Aufnahmen
Schraubstock
Gew... more
|
|
6
2008
excellent (used)
CNC drilling/milling machineManufacturer: AndersonTyp: PD-2328/S2RBuilt: 12/2008SpecificationsX-NC: 900 mmY-NC: 700 mmZ-NC: 60 mmSpindle speeds: 10,000 - 80,000 rpm (water-cooled)Spindle power: 1.2 kWInstallation dimensions HxWxD: 2200 x 3360 x 3440 mmMachine weight: 4,000 kg
Sthmco more
|
|
9
1990
good (used)
X=760 / Y=410 / Z=480 mm !!!
Clqxupn
40-6000 RMP
Table 925 x 380 mm
Iso 40 recording
Heidenhain TNC 2500
20 Tools holder
Weight 3500 kg more
|
|
7
Ref.-Nr. 00598
Description Used milling machine
Made Takumi Machinery Co LTD
CNC Team
Model V8A
Year 03/2001
Control Fanuc Series 18M
mains voltage 400V
3 phases 50 Hz
current 50A
fuse 63 A
Voltage with transformer
Control voltage 220 V 100 V 24 V
control type 18 MC
According to the machine sheet:
Table
Table size 1000x510mm
Tee slots (W x No. x Pitch) 18x5mm
Table Load (maximum) 600/1320 kg /lbs
Travel
X Axis 810mm
Y Axis 510mm
Z Axis 460 mm (560)
Spindle center ... more
|
|
0
Overhaul in 2003 and 2013
Control: CNC path control incl. screen HEIDENHAIN TNC 415
TECHNICAL DATA
Working range x-axis (longitudinal) 710 mm
y-axis (transverse) 560 mm
z-axis (vertical) 500 mm
angle table
Table clamping surface 1,200 x 600 mm
Drive power (100/44% ED) 7.5/11.3 kW
Speed range, infinitely variable 5-5,000 1/min.
Torque max. 1,100 Nm
Tool holder (with feed groove) ISO40/M16
EQUIPMENT/ACCESSORIES
Swivelling vertical milling head, rotatable by 90°
Vertical/horizontal mach... more
|
|
1984
excellent (used)
CNC Universal milling Hermle UWF 1000, 4 axis
YOM: 1984
Control: Siemens Sinumerik 3M
X axis: 700 mm
Y axis: 550 mm
Z axis: 500 mm
4th axis table: Ø 500 mm
Fixed table: 1000 x 500 mm
Spindle: 2500 rpm, 6,9 kW
Tool taper: ISO 40
Rcwe9o0
Machine weight: 3,5 t.
Working space (approx.) 2,7 x 3,4 m
Cooling system, extra fixed table, documentation, some spare parts. more
|
|
12
3-axis vertical machining centerManufacturer: MIKRON / HAASTyp: VCE 750Assembly: 10.01.1997Machines No.: 8599Control: HAAS / NC-Stand: 9.18 N Included in delivery: Tools in the machine, tool cupboard filled, documentation and user manuals. A visit by appointment is possible and desired.VCE 750 MIKRON machining centre o/Getr with full protection cabin and FANUC compatible control Mikron CNC travels: longitudinal X: 760 mm, transverse Y: 400 mm, vertical Z: 500 mm working table 365 x 910 mm, load ... more
|
|
5
1987
good (used)
Ref.-Nr. 00584
Description Used milling machine
Made Maho
Model Maho 700 C NC round table
Year of made 1987
Control Philips 432
Traversepath 700 450 500 mm
Bfrhzdeqwq
ISO 40
Working hours 12.785,8h
Condition Good
Delivery date immediately more
|
|
1
CNC univ. milling machine (X: 700 mm)
SMA-REF-6438
Type: CNC milling machines
Manufacturer: Emco
Model: FB-6 TNC 310
Year: 2001
Control: Heidenhain TNC 310
Spindle:
SK 40
63 - 3.150 rpm
Working range:
Bfsgv8b2wg
X: 700 mm
Y: 500 mm
Z: 500 mm
Table: 900 x 500 mm
max. 500 kg
Features: incl. housing
Condition:
ready for action
under power
Location: Southern Germany
Availability: on demand
Terms of delivery: ex works
Terms of payment: 100% before dismantling/loading more
|
|
1
Control Heidenhain TNC 426 with graphicsX=700Y=630Z=500incl. dividing head (4th axis)Tool changer SK40very good condition
Bfrs02igxt more
|
|
8
Fräsmaschine - Universal MAHO MH 700 S
Lager-Nr. 1105-02436
Kategorie
Fräsmaschine - Universal
Fabrikat
MAHO
Typ
MH 700 S
Baujahr 1992
Zustand Gebrauchtmaschine
Steuerung CNC CNC 432
Lagerort HAGUENAU
Ursprungsland Deutschland
Lieferzeit sofort
Frachtbasis ab Lager
Weitere Infos
Auf Anfrage
Technische Details
x-Weg 700 mm
y-Weg 450 mm
z-Weg 500 mm
Drehzahlbereich - stufenlos 4500 U/min
Werkzeugaufnahme Sk40
Pinolenhub 100 mm
Vorschub stufenlos 1-3000 mm/min
Eil... more
|
|
3
repair required (used)
x-way: 800 mmy-way: 450 mmz-way: 500 mmspindle motor: 5.5 kWspindle cone ISO: 40 spindle speeds: 63 - 3150 rpm quill stroke: 80 mmtable size: 1200 x 600 mmfeed range: 1 - 2000 mm/mintotal power requirement: 8 kWmachine weight approx.: 4 tspace requirement approx.: 2,5 x 2,1 x 2,2 mmachine with MAHO CNC 432 control- rigid Wnkelt- splash protection- manual control panel- Horiz/Vertical spindle incl. various accessories.sale as seen, without guarantee and warranty.machine under power, error message... more
|
This may be of interest to you
Machineseeker becomes biggest sponsor of the 2nd Bundesliga in Germany
Sample sales contract for used machines in nine languages
10 valuable tricks for buying used machines online
Sell now on Machineseeker! Over 160,000 inquiries per month
Photo gallery: The World's 10 biggest excavators
Sponsorship of Michael van Gerwen and TV advertising
Didn't find what you were looking for? Please contact our partners for this category :
Dealer for Milling machines
Dealer for Milling machines
