Milling machines Matsuura V.PLUS-550 2005

Matsuura V.PLUS-550

Condition: used, Wire erosion FANUC ROBOCUT ALPHA-0iE Fjdsxqrqaepfx Afnefu

Condition: like new (used), Year of construction: 2021, operating hours: 1,200 h, X 800 mm H 460 mm Ffjdjv Th E Aepfx Afneu Z 510 mm Control FANUC Chip Conveyor Including 4-axis Rotary table.

Year of construction: 1990, condition: good (used), CNC-4th axis NIKKEN type: CNC-200 year 1990 with counterholder and base plate. Ffedjgabu Ujpfx Afneu

Condition: used, max. wheel diameter 180 mm gear width 45 mm max. module 4 min. module 0,5 stroke length max. 0 - 52 mm spindle taper innen MK 4 table diameter 160 mm table bore diameter 75 mm no. of strokes 355 - 630 Hub/min feed range 0,008 - 0,4 mm/Hub dimensions of the machine ca. 2,30 x 1,50 x 2,36 m power capacity 6 kW weight of the machine ca. 2.500 kg Ffsdju Uu S Tepfx Afneu Year of construction: Approx. 1970

Condition: used, Year of construction: 2001, Deckel Maho DMC 60U Hi-dyn Machining Center Condition: Used Year of manufacture: 2001 Operating hours: 56,376 Spindle hours: 26,451 Technical specifications: Travel X/Y/Z: 600 / 700 / 600 mm Motor power: 15 kW (40% duty cycle); 10 kW (100% duty cycle) Spindle speed: 18,000 rpm Ffjdpfx Afsu Rnlujnou Tool holder: SK 40 Magazine positions SK 40: 60 Equipment: - 3D path control MillPlus IT - Horizontal double-arm tool changer - Automatic swivel milling head - Rotating safety glass - NC rotary table with pallet carrier - Rotary pallet changer - 2 pallets 630 x 500 mm - Universal milling head with controlled B axis SK 40 (only in combination with SK 40 motor spindle) - Tool holder for HSK-A63 according to DIN 69893 - Electronic handwheel - Operating mode 4 extended manual intervention - Rinse gun with pump - Tool breakage control SK 40 mechanical version, range: 63...310 mm / +/- 3 mm - Intermittent chip conveyor operation - Internal coolant supply switchable from 40 bar to 80 bar

Year of construction: 2002, condition: reconditioned (used), Beam cutting, drilling and marking line DISC SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year 2002 Serial number: 122.400 Weight without accessories: 10,980kh - Disc saw with downward cut. - Geared saw unit, drive system and saw blade on wear-resistant swivel bearing. - Heavy saw gear with pinions in oil bath, with inclined teeth, hardened and sharp. - Hydraulic advancement of the saw blade, adjustable according to the table, very fast recoil. - Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic recoil limitation. - Vertical clamping block with self-adjusting push plate. - Oblique cutting device to adjust the angle from 45° to the left to 35° to the right. - Material sensor to automatically switch from rapid advance to work advance. - Hydraulically elevating feed roller for optimum material transport on the saw table. - Economical lubrication by means of a micro-dosing installation, especially suitable for sawing profiles. - Chip collector installed on the machine bench. Specs: - Cutting disc housing: 100x4x30x250mm - Cutting disc diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min. - Saw advance speed: 0-400mm/min. - Fast reverse speed: 2000mm/min. - Total power: 25KW - Working height: 640mm Cutting capacities: 90º cut - Angle steel: 250mm - Steel in U: 400mm - Double T-beam: 600mm - Wide flanged beam: 1008x302mm - Special wing beams: 1000x450mm Cut to degrees: IPBv beam - 75º: 1008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478X307mm IPBs beam - 75º: 1008x402mm - 45º: 524x357mm IPE beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX1215 Serial number: 122.401 Work capabilities: - Angular steel (minimum - maximum): 80x65x10mm - 250x250x28mm - Steel in U (minimum - maximum): 80x45mm - 400x110mm - Double T beam (minimum - maximum): 80x46mm - 600x220mm - Wide flanged beam (minimum - maximum): 100x100mm - 1,008x302mm - Extra wide wings beam: 1,200x500mm Drilling units: 3 - Vertical (Y axis) 1 pc. - Horizontal (Z and W axes) 2ud. Drilling diameters: 8 - 40mm RPM: 150 - 1100 Fast forward - Fast reverse: 3,850mm/min. - 8,000mm/min. Drilling spindle feed rate: 0-500mm/min. Fast spindle positioning tool: 15,000mm/min. Automatic tool changer: 5 u. in each drilling unit. 3x5 u. = 15 total Total power: 45KW MARKING UNIT FEEDING: 26 METERS OF ENTRY WITH BEAM FEEDER + 6 SIDE ARMS FOR BEAM ENTRY IN PARALLEL TO THE ROLLER TRACKS 30 METERS OF ROLLER TRACKS WITH OUTPUT + 6 SIDE ARMS 4 SIDE ARM FOR SMALL PIECES Ffedpfehzbipox Afnsu THE GREAT MAJORITY OF ROLLERS ARE MOTORIZED It occupies approximately 60 linear meters between input and output power. *Request machine installation plans.

Year of construction: 1997, condition: used, Price: On request - Year: 1997 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Drive system: CNC - Number of axes [pcs]: 5 - X-axis travel [mm]: 1200 - Y-axis travel [mm]: 880 - Z-axis travel [mm]: 800 - Table length [mm]: 5000 - Tool holder: SK40 - Max. spindle speed [rpm]: 18000 Fjdpjwh Shvsfx Afnofu - Options: Digital readout - └ Type of digital readout: Heidenhain Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: new, 8 St. range L-W-H 720 x 580 x 1000 mm weight 128 kg 100Kg je Lade Stable tool cabinet with 8 drawers, lockable. 2 x 75, 4 x 100, 1 x 150 and 1 x 200mm Internal dimensions: 620x450 mm. Maximum load per drawer 100kg!!! Furnishings: 32x boxes 75 x75 mm. 16x boxes 75 x 150 mm. 8x boxes 150 x 150 mm. 12x dividers long 32x short dividers 1x stacking tray Fjdpfx Aju Impmjfnjfu

Year of construction: 1985, condition: used, workpiece diameter 25-90 mm threading length 3000 mm thread pitch 2-16 mm Ffodpfx Astzdyzsfnou total power requirement 25 kW weight of the machine ca. 10,5 t dimensions of the machine ca. m

Condition: used, Year of construction: 2006, 2006 Hurco VM1 Vertical Machining Centre YOM: 2006 Technical Information – Hurco VM1 VMC General Data Measurements width: 1800 mm Measurements depth: 1900 mm Measurements height: 2600 mm Machine weight: 2700 kg Main drive Number of spindles: 1 Spindle speed range: 40-8000 1/min Spindle motor power: 11 kW Movement X-AXIS Movement: 660 mm X-AXIS Working Feed: 8 m X-AXIS Rapid traverse: 20 m X-AXIS Accuracy: 0.005 Y-AXIS Movement: 350 mm Y-AXIS Working Feed: 8 m Y-AXIS Rapid traverse: 20 m Y-AXIS Accuracy: 0.005 Z-AXIS Movement: 450 mm Z-AXIS Working Feed: 8 m Z-AXIS Rapid traverse: 20 m Fodpfov Suwiex Afnefu Z-AXIS Accuracy: 0.005 Workpiece Workpiece weight: 350 kg Table Outer length: 762 mm Outer width: 356 mm Delivery & Siting available at extra charge – Please ask for price.