Used Milling machines - univ.NC/CNC 0-399mm X-axis travel for sale (17)

Condition: as good as new (ex-display), Year of construction: 2024, Machine is in the exhibition and was only used for demonstration purposes. Optimill F 50 CNC milling machine direct from the manufacturer. - Machine in column construction made of cast iron for high rigidity - Carousel tool changer with 8 tool positions - All linear guides with stainless steel covers - Automatic central lubrication - Siemens main spindle motor - Siemens servo drive in all axes (closed control loop) - Maximum spindle speed of 10,000 min-1 - The portable, electronic handwheel with enabling switch and emergency stop switch makes it much easier to run in programs SINUMERIK 808 ADVANCED CNC technology from the technology leader SINUMERIK 808D on PC - Control-identical software package that further simplifies the handling of the machine tool Compact and robust - Thanks to a panel-based CNC design with few interfaces and a control panel in protection class IP65, the SINUMERIK 808D ADVANCED is perfectly prepared for use in harsh environments Communicative - Front panel USB (IP65) - Serial interface RS232C - RJ45 Ethernet on the rear - Technology-specific keyboard layout - Hard keys with protective membrane Machine data Electrical connection 400 V / 3 Ph ~50 Hz Total connected load 10 kVA Milling spindle Drive motor S1 operation 3.7 kW Torque drive motor S1 operation 24 Nm Drive motor S6-30% operation 5.5 kW Torque drive motor S6-30% operation 36 Nm Spindle holder BT 30 Coolant system Coolant pump output 450 W Tank capacity 70 liters Milling accuracy Repeat accuracy 0.015 mm Positioning accuracy 0.015 mm Tool changer Carousel type Number of tool positions 8 positions Tool diameter max. 100 mm Tool length 200 mm Tool weight max. 6 kg Tool change time according to VDI 2852 7 seconds Travel distance X-axis 330 mm Y-axis 220 mm Z-axis 320 mm Feed drive Rapid traverse X-, Y-, Z-axis 15 m/min. Motor torque X-axis 3.5 Nm Y-axis 6 Nm Z-axis 6 Nm Speed range Bwjbeuy Nh Ne Eq Urael Speeds* 10,000 min-1 Pneumatics Air pressure 6 bar Milling table Distance spindle - table 90 - 410 mm Distance spindle - column 280 mm Table length x width 690 x 225 mm T-slot size / number / distance 14 mm / 3 / 63 mm Max. load 150 kg Dimensions Length x width x height 2,030 x 1,600 x 1,980 Total weight 1,900 kg

Condition: new, The LabCenter is ideal for CNC training, but also for the production of small workpieces. The compact and mobile CNC machining center represents the full range of functions of a large production machine. The main spindle rotates continuously variable up to 5000 revolutions and the Siemens 808 control offers an ideal introduction to CNC applications with its simple, intuitive operator guidance. With the ISO 20 spindle taper, automatic tool clamping and a 4-way pick-up tool changer, the LabCenter enables practice-oriented training. Bsb Eq Ureuy Ihheajwl

Condition: good (used), Year of construction: 1996, Didactic Milling Machine REALMECA FD Travel X: 245 mm Travel Y: 145 mm Bwsb Eq Urjvi Hbbeaol Travel Z: 245 mm CNC : NUM 720 F Spindle: cone E25 Spindle speed: from 0 to 4000 RPM Table size: 400 x 150 mm Year of construction: 1996 Tool changer: 8 tools - Tool Ø: 40 mm Spindle motor: 0,75 kW Machine from the French National Education Machine to be restarted, sold as is Voltage: 220 V mono Dimensions (L x W x H): 1020 x 1300 x 1040 mm Weight: approx 500 kg

Condition: like new (used), x-travel:300 mm y-travel:220 mm Bwjb Eeh Ty Hksq Urajl z-travel:400 mm surface area:620 x 390 mm turning speeds:31 - 3150 U/min feed range:1 - 3600 mm/min rapid traverse:4000 m/min

Condition: used, TECHNICAL DETAILS - Travels on X/Y/Z axes : 400 x 400 x 400 [mm] - Tool type : ISO40 - Spindle speeds : 31.5 - 3500 [rpm] - Spindle power : 6.5 [kW] Bjb Eqsvxw Aue Urajwl WEIGHT & DIMENSIONS - Machine floor space : 2900 x 2650 [mm] - Machine height : 2000 [mm] - Machine weight : 2200 [kg] EQUIPMENT - CNC : Heidenhain TNC 155 - Milling vice

Condition: excellent (used), Universal milling machine Fab. MAHO Typ. MH 300 M Technical data: Make MAHO Type MH 300 M Table size 520 x 260 mm X-path 300 mm Y-path 350 mm Z-path 200 mm Speed 40-2000 rpm Tool holder SK 40 Tool clamping M16 Quill stroke 50 mm Feed rates X, Y, Z 5 - 500 mm/min Total power 1.1 kW Dimensions WxDxH 1200 x 1100 x 1800 mm Weight approx. 800 kg All data without guarantee. Bob Eq Ursrp Egqjaowl A demonstration is possible at any time in our showroom.

Condition: as good as new (ex-display), Year of construction: 2023, Machine is in the exhibition and was only used for demonstration purposes. Optimill F 80 CNC milling machine direct from the manufacturer. - Machine in cast iron column design for high rigidity - Carousel tool changer with 12 tool positions - All linear guides with stainless steel covers - Automatic central lubrication - Siemens main spindle motor - Siemens servo drive in all axes (closed control loop) - Maximum spindle speed of 10,000 min-1 - The portable, electronic handwheel with enabling switch and emergency stop switch makes it much easier to run in programs SINUMERIK 808 ADVANCED CNC technology from the technology leader SINUMERIK 808D on PC - Control-identical software package that further simplifies the handling of the machine tool Compact and robust - Thanks to a panel-based CNC design with few interfaces and a control panel in protection class IP65, the SINUMERIK 808D ADVANCED is perfectly prepared for use in harsh environments Communicative - Front panel USB (IP65) - Serial interface RS232C - RJ45 Ethernet on the rear - Technology-specific keyboard layout - Hard keys with protective membrane Dimensions and weights Length approx. 1995 mm Width/depth approx. 1930 mm Height approx. 1640 mm Weight approx. 2300 kg Rapid traverse speed X-axis 20 m/min Y-axis 20 m/min Z-axis 20 m/min Electrical data Supply voltage 400 V Mains frequency 50 Hz Electrical connection Total connected load 12 kVA Horizontal milling table Length 800 mm Width 260 mm Distance vertical spindle - milling table min. 100 mm Distance vertical spindle - milling table max. 550 mm T-slots size 16 mm Number of T-slots 5 T-slot spacing 50 mm Load capacity max. 200 kg Accuracy Repeat accuracy ± 0.01 mm Bweb Eq Usuy S Eqerajl Positioning accuracy ± 0.01 mm Coolant system Coolant pump(s) Drive power 450 W Tank capacity 80 l Pneumatic connection Operating pressure 7 bar Travel distance X-axis automatic 450 mm Y-axis automatic 260 mm Z-axis automatic 450 mm Distance spindle - column max. 370 mm Vertical spindle Spindle holder BT 40 Speed range 50 - 10000 min¯¹ Power drive motor continuous operation S1 3.7 kW Power drive motor S6-30 % operation 5.5 kW Torque drive motor continuous operation S1 24 Nm Torque drive motor 30% operation S6 36 Nm Feed motor Torque X-axis continuous operation S1 6 Nm Y-axis continuous operation S1 6 Nm Z-axis continuous operation S1 11 Nm Tool changer Carousel type Number of tool positions 12 tools Tool diameter max. 95 mm Tool length max. 300 mm Tool weight max. 8 kg Time tool change chip to chip (C to C) 7 s

Condition: used, Year of construction: 1979, x-travel 300 mm y-travel 160 mm z-travel 340 mm spindle taper ISO 40 Bsb Eqsviyf He Uraowl spindle turning speed range 40 - 2000 U/min feeds -stepless- 5 - 500 mm/min rapid traverse 1200 mm/min creep feed 4 mm/min control Heidenhain TNC 113 total power requirement 1,6/2 kW weight of the machine ca. 570 kg dimensions of the machine ca. 1,2 x 1 x 1,75 m with active digital display "Heidenhain TNC 113", for automatic retraction of preselected slide positions in absolute and incremental travel, autom. feeds stepless in x + z axis, sliding upper arm 100 mm. We ask private interested parties to refrain from making an inquiry, as this is a well-maintained professional machine and usually exceeds the budget of hobby mechanics, including VAT. Machine dealer with own stock of 1600 m².

Condition: repair required (used), Year of construction: 1987, For sale is a small milling center of the brand Maho and type 300 C The power supply unit is defective but can be repaired Technical data: YEAR OF MANUFACTURE 1987 Type: MH 300 C CNC control Phillips 432 Table: 550x275 mm Bweb Eq Ujir U H Esrajl Travel x/y/z : 300/350/220 mm SK 40 holder Spindle speed: 20-4000 rpm Main drive: 3.3 kw Rapid traverse: 3 m/min Quill stroke: 50 mm Dimensions: 2000 x 2000 x 2000 mm Weight: approx. 1900 kg Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: used, CNC 3+2 axis vertical machining center DECKEL MAHO type DMU 35 M CNC control SIEMENS 810D with ShopMill Manufacturer no. 11065353554 Year of manufacture 2001 Travel paths: X: 350 mm, Y: 240 mm, Z: 340 mm Table movements: C-axis: 360° Swivel range: +105° / -15° Universal swivel - rotary table: 400 x 290 mm, center hole 30H6 Table load: max. 100 kg Distance spindle nose - table: min. 145 mm to max. 485 mm Feed rate: 5,000 mm/min Rapid traverse (X / Y / Z): 5 m/min Input resolution: 0.01 mm Total power requirement: 15 kVA Speed range - main spindle: 20 - 6,300 min/-1 Drive power - main spindle: 6.3 / 10 kW (100% / 40% ED) Torque: max. 55 / 80 Nm Tool holder: SK 40 DIN 69871 Pull bolt: DIN 69872 or ISO 7388/2 Type B Bob Eq Urevt D D Ujajwl Interface: Serial RS232C, LAN (RJ45) Power connection: 400 volts, 50 Hz, 15 kVA Compressed air connection: 6 bar - CNC control Siemens Sinumerik 810D with ShopMill V05.03.22, NCU 03.03.34-CCU1E, MMC103 - 3-axis controlled (X, Y and Z axis) - Manual swivel rotary table, C axis = table rotation 360°, B-axis = swivel range +105°/ -15° - direct path measuring system for all 5 axes - electronic handwheel - spindle drive via servo motor with toothed belt and 2 gear stages - fully protected cabin with sliding door - swiveling control panel - coolant nozzles on the vertical head - chip tray with coolant container and cooling lubricant pump - work area lighting - documentation available space requirement L x W x H 2000 x 2000 x 2100 mm weight 1750 kg good condition

Condition: like new (used), Year of construction: 2019, operating hours: 520 h, Functionality: fully functional, machine/vehicle number: F3M194801, feed length X-axis: 300 mm, feed length Y-axis: 200 mm, feed length Z-axis: 350 mm, spindle speed (max.): 2,200 rpm, controller model: Heidenhain ND7000, The machine was used for training purposes and has only approximately 520 spindle hours. TECHNICAL DETAILS Horizontal longitudinal feed (X): 300 mm Horizontal transverse feed (Y): 200 mm Vertical table feed (Z): 350 mm Fixed angle table Clamping surface (L x W): 600 x 200 mm Width/number of T-slots: 12 x 21 mm / 4 pieces Permissible workpiece weight: max. 50 kg Bwsb Eq Uev Iqbcsrasl Horizontal milling spindle (behind vertical milling head) Tool holder: DIN 2080 SK 30 Mechanical speed settings: 8 Speed range: 80 - 2,200 rpm Distance to table surface: 80 - 430 mm Vertical milling head Tool holder: DIN 2080 SK 30 Quill stroke: 45 mm Pivoting vertical milling head: ± 90° Mechanical speed settings: 8 Speed range: 80 - 2,200 rpm Distance to table surface: 35 - 385 mm MACHINE DETAILS Spindle hours: approx. 520 h Dimensions: 1,410 x 1,150 x 1,550 mm Weight: 500 kg EQUIPMENT - Pivoting vertical milling head ± 90° - Tool radius correction - Vice and collets - Drill chuck and parallel supports

Condition: used, branded milling machine, Stanko type 6175 Travel X/Y/Z: 320/210/300 mm Spindle speed: 50 - 2040 rpm Feed speed: 13 - 395 mm / min Drive power: 1.5 kW Tool holder: 4 MK Groove width: 14 mm Bsb Ejtrl D Seq Uraswl Number of grooves: 3 pieces Groove spacing: 50 mm

Condition: as good as new (ex-display), Year of construction: 2023, Machine is in the exhibition and was only used for demonstration purposes. Optimill F 3 Pro CNC milling machine (training machine) directly from the manufacturer. F 3 PRO - The OPTIMUM CNC milling machine with Siemens control SINUMERIK 808D Advanced is characterized by performance, speed, precision and long service life. All linear guides with stainless steel covers Automatic central lubrication Servo drive from SIEMENS in all axes (open control loop) Max. Spindle speed 4000 min-1 Machine light in the work area Portable, electronic handwheel with enabling switch and emergency stop switch. Makes running in programs considerably easier Tools can be changed at the touch of a button Access doors very generously designed to reduce cleaning and maintenance time to a minimum Software package "SINUMERIK 808D on PC" included. (Practical training software so that workpieces can be programmed and simulated offline on the PC. Software can be downloaded free of charge at). SINUMERIK 808 ADVANCED - CNC technology from the technology leader, paired with a revolutionary operating concept The SINUMERIK 808D ADVANCED control is a panel-based CNC control. The compact and user-friendly entry-level solution is used for simple milling applications. Features such as simple operation, commissioning and maintenance are the perfect basis for equipping CNC machines. Compact and robust Thanks to a panel-based CNC design with few interfaces and a control panel in protection class IP65, the SINUMERIK 808D ADVANCED is perfectly prepared for use in harsh environments. The small dimensions allow it to be used in compact machines INCLUDED RJ45 Ethernet port 8.4" LCD color display with 800 x 600 resolution Prepared for remote maintenance Dimensions and weights Length approx. 1410 mm Width/depth approx. 1372 mm Height approx. 2007 mm Weight approx. 1000 kg Drilling/milling capacity Cutter head size max. 50 mm End mill size max. 25 mm Electrical data Supply voltage 400 V Mains frequency 50 Hz Electrical connection Total connected load 5 kVA Horizontal milling table Length 620 mm Width 180 mm Distance vertical spindle - milling table min. 50 mm Distance vertical spindle - milling table max. 295 mm T-slots size 12 mm Number of T-slots 3 T-slot spacing 50 mm Load max. 30 kg Accuracy Repeat accuracy ± 0.02 mm Positioning accuracy ± 0.01 mm Coolant system Coolant pump(s) Drive power 95 W Tank capacity 30 l Travel distance X-axis automatic 355 mm Y-axis automatic 190 mm Z-axis automatic 245 mm Vertical spindle Spindle holder BT 30 Speed range 4000 min¯¹ Explanation Speed range Please note that the maximum spindle speed must be reduced by approx. 20 % in continuous operation Power drive motor continuous operation S1 1.5 kW Power drive motor S6-30 % operation 2.2 kW Torque drive motor continuous operation S1 9.5 Nm Torque drive motor 30% operation S6 14 Nm Feed rate Speed X-axis 10000 mm/min Y-axis 10000 mm/min Z-axis 10000 mm/min Feed motor torque X-axis continuous operation S1 1.9 Nm Y-axis continuous operation S1 3.5 Nm Z-axis continuous operation S1 3.5 Nm Bwsb Eq Urjuy S D Heaol

Condition: used, Year of construction: 2007, Functionality: fully functional, rapid traverse X-axis: 590 m/min, rapid traverse Y-axis: 180 m/min, rapid traverse Z-axis: 320 m/min, Machine comes from a bankruptcyTECHNICAL DETAILS Quill stroke: 125 mm Travel X (longitudinal): 590 mm Travel Y (transverse): 180 mm Z travel (vertical): 320 mm Spindle/table distance: 0 - 375 mm Projection: 230 - 685 mm Table swivel range: ±45° Spindle head swivel range: ±90° Table size: 1,000 x 240 mm Spindle holder: ISO 40 Spindle speed vertical: 115 - 1,750 rpm, 8 steps Spindle speed, horizontal: 60 - 1,350 rpm, 9 steps Bwob Eqevb Npre Uraol Feed range, longitudinal: 32 - 700 mm/min, 8 steps T-slot size: 14 mm MACHINE DETAILS Motor power vertical: 0.85 / 1.5 kW Horizontal motor power: 1.5 kW Machine dimensions (W x D x H): 1,500 x 1,430 x 2,100 mm Weight: approx. 980 kg

Condition: used, Univ. NC tool milling machine KUNZMANN type WF 3/4 Machine. No. 341020 Year of construction 1998 Bweb Eqelvyrbs Urael Travel X: 400 mm Y: 320 mm Z: 400 mm Table size 650 x 350 mm Spindle holder SK 40 Spindle speed 40 - 2500 rpm. Feed rates X, Y and Z-axis 0 - 1000 mm/min. infinitely variable Rapid traverse X, Y-axis 4000 mm/min. Rapid traverse Z-axis 3000 mm/min. Vertical pinol adjustment 60 mm Drive power spindle motor 3 KW Mains connection 400 Volt, 50 Hz - CNC line control Heidenhain TNC 124 - Spindle speed via 2 gear stages and infinitely variable via electronically controlled variator gearbox - Vertical milling head can be tilted +/- 90 - Hydraulic tool clamping - Fixed angled table - Control cabinet fixed to the machine - Coolant tank with pump adjacent - central lubrication - central lighting Space requirement L x W x H 1800 x 1800 x 1900 mm Weight 1300 kg Good condition

Condition: like new (used), Year of construction: 2016, operating hours: 290 h, Functionality: fully functional, machine/vehicle number: F1F 161101, travel distance X-axis: 190 mm, travel distance Y-axis: 140 mm, travel distance Z-axis: 260 mm, spindle speed (max.): 3,500 rpm, table width: 125 mm, table length: 420 mm, rotational speed (max.): 14,000 rpm, Milling machine including engraving spindle and 4th axis, as well as automation setup! The machine was used for training purposes and has only approximately 290 spindle hours. TECHNICAL DETAILS X-axis travel: 190 mm Y-axis travel: 140 mm Z-axis travel: 260 mm Usable Z-axis slide travel: 120 / 190 mm Distance from spindle nose to table surface: 77 - 337 mm Control: Heidenhain TNC 426 Mill Milling table Clamping surface (L x W): 420 x 125 mm Max. table load: 10 kg T-slots according to DIN 650: 2 x 11 mm T-slot spacing: 90 mm Milling spindle drive: Three-phase asynchronous motor, power: 0.75 kW Speed range (infinitely variable): 150 - 3,500 rpm Max. torque: 3.7 Nm Engraving spindle speed: 14,000 rpm Tool changer Number of tool stations: 8 Max. tool weight: 1 kg Max. tool diameter with/without changer: Ø 40 / 60 mm Bwsb Eq Ujv Ip Izerajl Feed drive Accuracy thanks to 3-phase stepper motors: 0.5 µm Working feed and rapid traverse: 0 - 2 m/min Average position variation: 0.008 mm MACHINE DETAILS Footprint (W x D): 960 x 1,000 mm Total height: 980 mm Total weight including tool changer: 220 kg Spindle hours: 290 h EQUIPMENT - Win3D View simulation - 8-station tool changer with pick-up system and blow-out device - Electronic handwheel - Swivel table with keyboard extension - Pneumatic vise 72 mm - 4th axis with three-jaw chuck - Engraving spindle unit (4:1 ratio) including 6 collets (1/1.5/2/2.4/3/3.2 mm) and union nut - Pneumatic automatic door and clamping device - I/O expansion board, robotics and DNC interface - Comprehensive tool set for operation, operating manual with spare parts list

Condition: like new (used), Year of construction: 2020, operating hours: 70 h, Functionality: fully functional, machine/vehicle number: F1F 204605, travel distance X-axis: 190 mm, travel distance Y-axis: 140 mm, travel distance Z-axis: 260 mm, spindle speed (max.): 3,500 rpm, table width: 125 mm, table length: 420 mm, Machine is prepared for automation! The machine was used for training purposes and has only approximately 70 spindle hours. TECHNICAL DETAILS X-axis travel: 190 mm Y-axis travel: 140 mm Z-axis travel: 260 mm Usable Z-axis slide travel: 120 / 190 mm Distance from spindle nose to table surface: 77 - 337 mm Bjbov Ip Alj Eq Uraewl Control: Heidenhain TNC 426 Mill Milling table Clamping surface (L x W): 420 x 125 mm Max. table load: 10 kg T-slots according to DIN 650: 2 x 11 mm T-slot spacing: 90 mm Milling spindle drive Three-phase asynchronous motor, power: 0.75 kW Speed range (infinitely variable): 150 - 3,500 rpm Max. torque: 3.7 Nm Engraving spindle speed: 14,000 rpm Tool changer Number of tool stations: 8 Max. tool weight: 1 kg Max. tool diameter with/without tool changer: Ø 40 / 60 mm Feed drive Accuracy thanks to 3-phase stepper motors: 0.5 µm Working feed and rapid traverse: 0 - 2 m/min Average position variation: 0.008 mm MACHINE DETAILS Spindle hours: approx. 70 h Footprint (W x D): 960 x 1,000 mm Total height: 980 mm Total weight including tool changer: 220 kg EQUIPMENT - Win3D View simulation - 8-station tool changer with pick-up system and blow-out device - Electronic Handwheel - Swivel table with keyboard extension - I/O expansion board, robotics and DNC interface - Comprehensive tool kit for operation, operating instructions with spare parts list