Used milling machines - univ.NC/CNC over 1000mm X-axis travel for sale (26)

Condition: used, Year of construction: 2000, machine/vehicle number: VH20011, controller model: Heidenhain TNC 426, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Csdpfx Ao Ah Dtwoqvjri CNC control: Heidenhain TNC 426 Tool holder: SK 50 EQUIPMENT Rotary milling head Various tool holders Note: The machine is sold without tools.

Condition: excellent (used), Year of construction: 2018, Clausing Colchester 4VSQ MLLPWR CNC Turret Milling Machine Acu-rite Mill Power 3 Axis CNC Control Table Size 1370 x 254mm Travels: X – 1050mm Y – 390mm Z (Quill) – 115mm Z (Knee) – 355mm Vari Speed Head Spindle Taper IS040 Spindle Speeds Low 60 – 500rpm Spindle Speeds High 55 – 4300rpm Weight: 1850Kgs Credpox Af I Aefx Aqvei 3 Phase Electrics Manufactured: 2018 Complete with: Vice Interlocking Table Guards Air Draw Bar Tooling Packaged (ISO40) Power Rise and Fall to Knee Auto Lube Worklight Coolant & Swarf Guards / Tray *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #79028 Machine Serial Number: TC0015 Cost: £12,500.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 1996, Milling Center KAFO Type/Model: VMC-1400 Control: Fanuc Condition: Used Year of Manufacture: 1996 Technical Data Machine Table Table Size: 1700 x 730 mm Working Area: 1700 x 650 mm T-slots: Width: 18 mm x 5, Spacing: 125 mm Max. Table Load: 2000 kg Travel Ranges / Working Areas Travel Ranges X / Y / Z: 1450 / 750 / 700 mm Cedpj Ahxliefx Aqvori Distance Spindle Nose - Table: 200 - 900 mm Spindle Overhang: 750 mm Spindle Spindle Taper: BT-50 Spindle Speed: 40 - 4000 rpm Speed Control: Stepless speed control in 2 stages Feeds Rapid Traverse (X and Y axis): 12,000 mm/min Rapid Traverse Z axis: 10,000 mm/min Feed Rate X / Y / Z axis: 1 - 4000 mm/min Automatic Tool Changer Tool Magazine: 30 positions Tool Selection: Automatic direction change in any sequence Max. Tool Diameter: Ø 125 mm Max. Tool Length: 300 mm Max. Tool Weight: 15 kg Motors Feed Motors: 3.3 kW Spindle Motor Power: 15 kW Machine Dimensions Footprint (L x W): approx. 4400 x 3020 mm Weight: approx. 12,000 kg Inquiry Item: Transportation costs will be provided in a separate, customized quote.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, feed length X-axis: 2,000 mm, feed length Y-axis: 900 mm, feed length Z-axis: 800 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, total height: 3,130 mm, total width: 3,680 mm, total length: 5,350 mm, table width: 800 mm, table length: 2,000 mm, table height: 500 mm, position of the milling head: souvisle řízená ve 2 osách, type of input current: three-phase, rotational speed (max.): 4,000 rpm, rotational speed (min.): 20 rpm, table load: 3,000 kg, overall weight: 9,000 kg, workpiece weight (max.): 3,000 kg, Equipment: rotational speed infinitely variable, FSGQ 80 SM/A2 CNC - TOS KUŘIM Bed-Type Milling Machine, Table Length 2m Control System: Heidenhain TNC 530 Availability: In stock FSGQ 80 SM/A2 CNC – Technical Specifications: Basic Machine Data: Manufacturer: TOS Kuřim Overall length: 5,350 mm Overall width: 3,680 mm Overall height: 3,130 mm Total weight: 9,000 kg Total power requirement: 35 kVA Working Range: Longitudinal travel, X axis: 2,000 mm Transverse travel, Y axis: 900 mm Vertical travel, Z axis: 800 mm Crsdpfx Asxp Iyueqvei Spindle Head (Head S): Spindle taper: HSK-A 63 Max. power: 19.3 kW Speed range: 20 – 4,000 rpm Number of speed stages: stepless Machining: stepless in 2 axes Feed Range X – Y / Z: Number of stages / range: stepless / 5 – 20,000 mm.min-1 Table: Table size: 800 x 2,000 mm Max. table load: 3,000 kg Tool Changer: Number of tools: 24 Low-pressure tool cooling: 4 bar High-pressure cooling: 20 bar Control system: Heidenhain TNC 530 Further details upon request.

Condition: used, Year of construction: 1983, functionality: unexamined, total height: 1,900 mm, total width: 2,500 mm, total length: 3,000 mm, table width: 560 mm, table length: 1,400 mm, position of the milling head: Schwenkkopf, space requirement width: 2,500 mm, space requirement length: 3,000 mm, space requirement height: 1,900 mm, We are offering this used Deckel FP4NC milling machine, year of manufacture 1983. Csdpfjx Sygnsx Aqvori Table dimensions: 1,400/560 mm, swiveling head, SK 40 tool holder, Dialog 4 path control, installation dimensions: 300/250/190 cm. Heavy-duty robust design with slant bed. 8 SK40 tool holders and a machine vice are also available upon request. Location: 89312 Günzburg If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: good (used), functionality: fully functional, travel distance X-axis: 1,500 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 620 mm, table width: 450 mm, table length: 1,800 mm, rotational speed (max.): 6,000 rpm, overall weight: 4,500 kg, input voltage: 400 V, FOR SALE: Primero KM-150 Vertical Machining Center A reliable, well-maintained vertical machining center is available immediately from our stock in Finland. The Primero KM-150 is a versatile and robust machine suitable for a wide variety of milling, drilling, and contouring operations—an ideal solution for job shops, subcontractors, and production facilities seeking to increase capacity without the cost of a new machine. Crsdpfey Hmi Sex Aqvei Key Specifications: Brand / Model: Primero KM-150 Year of Manufacture: 2002 Country of Origin: Taiwan Control: C-TEK (English language interface) Spindle Speed: 0–6,000 rpm Spindle Power: 7.5 kW Tool Holder: BT40 Tool Magazine: 16 positions External Coolant System: Yes Axis Travels: X-axis: 1,500 mm Y-axis: 650 mm Z-axis: 620 mm Working Table: Length: 1,800 mm Depth: 450 mm Machine Dimensions & Weight: Width × Depth × Height: 3,000 × 2,280 × 2,550 mm Weight: 4,500 kg Why choose this machine? The generous 1.5-meter X-axis travel and a solid 1,800 mm table make the KM-150 especially suitable for larger workpieces, mold and die applications, and general production milling. The user-friendly, English-language C-TEK control provides intuitive operation, while the BT40 spindle interface is an industry-standard, ensuring easy access to tool holders and consumables.

Condition: good (used), Year of construction: 1990, 1 used, well-maintained CNC tool milling machine, traveling column design, with CNC path control GRUNDIG Dialog 11 Table size 1600 x 675 mm Tool holder SK / ISO 40 Travel distances X-axis, longitudinal 1200 mm Y-axis, transverse 600 mm Z-axis, vertical 500 mm Table load 2000 kg Spindle speed range 20 – 6300 rpm Feed rate range, stepless 2 – 10,000 mm/min Rapid traverse in all axes 10 m/min Quill stroke 80 mm Drive power 100% ED 7.5 kW 40% ED 12 kW Machine dimensions L x W x H 3600 x 3000 x 2300 mm Machine weight 6800 kg Control cabinet dimensions L x W x H 1700 x 900 x 1750 mm Control cabinet weight 470 kg Accessories / Special features: • CNC tool milling machine suitable for tool and fixture manufacturing, training, and mold making • CNC path control GRUNDIG Dialog 11 • Screen graphics, dialog-guided input, 3D linear interpolation, circular interpolation, helical interpolation, polar coordinate input, numerous drilling and milling cycles, cycle input graphically supported, milling cycles "contour pocket" for automatic free milling of irregular pockets, even with islands, shifting and rotation of the coordinate system • Electronic handwheel • RS 232 interface • Swiveling vertical milling head +/- 90° • Hydraulic tool clamping, DIN 2080 with clamping groove, Ott system • Quill adjustment 80 mm Csdohhuf Hjpfx Aqveri • Horizontal milling attachment • Full protection enclosure • Ball screw spindles in all 3 axes • Coolant system • Lighting Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Condition: excellent (used), Year of construction: 2012, LICON Type: LiFLEX 1477 1U Year of manufacture: 2012 Control system: Siemens SINUMERIK 840D Solution Line with integrated PLC control S7-300. Technical data of the machine Max. travel in X: 1400 mm Max. travel in Y: 700 mm Max. travel in Z: 700 mm A-axis swivel range: 45° to –225° B-axis: 360° Acceleration: max. 5 m/s² Travel speed: max. 60 m/min Technical availability: 96% Motor spindle speed: max. 16,000 rpm Motor spindle: HSK 63 Integrated spindle Spindle motor: 25 kW at 100% duty cycle Tool holder: HSK 63 Licon - Tool magazine DTC 30 2 disc magazines - total 60 positions. Positioning via servo motor Cjdpfxjzi E A Hs Aqveri Tool length from spindle center: max. 400 mm Tool diameter with full occupancy: max. 90 mm Tool diameter with free spaces on the right and left: max. 200 mm Tool weight: max. 15 kg Tilting moment (HSK plane): max. 15 Nm Tool change time: approx. 5.0 sec up to 15 kg Pallet changer with zero-point clamping system. Control system: - SINUMERIK 840D Solution Line with integrated PLC control S7-300. - PCU 50.3-C: Intel Celeron M Mobile processor 1.5 GHz / 512 Mbyte / 1 Mbyte L2 cache / 400 MHz - Connection of decentralized modules such as inputs/outputs, motor starters, interfaces is carried out via Profibus. - Operator panel front OP012 with 12.1" TFT color display, 800 x 600 pixels (SVGA), - Machine control panel MCP 483C - Siemens motors of type 1FK7 are used for the feed axes. - Spindles are designed as main spindle motors 1PH7, 1PM6 or asynchronous motors, depending on the application. Coolant supply: Technical data: Tank capacity: approx. 1500 l, Filter capacity: approx. 300 l/min for emulsion, 1x rinsing pump (centrifugal pump) 3 bar approx. 150 l/min, 1x HD screw spindle pump 30 bar, approx. 80 l/min. and minimum quantity lubrication (MQL). Voltage supply: 400V, 3 phases, 50/60Hz, TN-S with a reliable neutral conductor. Total connected load: approx. 106 kW. Dimensions, see layout plan. Transport dimensions, machine only, without auxiliary units: Approx. length 830 cm, width 360 cm, height 330 cm, weight 28000 kg.

Condition: as good as new (ex-display), Year of construction: 2022, Machine is on display. Optimill F 310 HSC Premium CNC milling machine, directly from the manufacturer. F 310 HSC – The OPTIMUM Premium CNC milling machine with Siemens SINUMERIK 828D control stands out for its performance, speed, precision, and long service life. • Heavy-duty design • High productivity • High reliability • Strongly ribbed, torsion-resistant machine base • Profile guideway with roller circulation in all axes for high load capacity • High-torque servo drives, directly mounted to ball screws on all three axes • Precision-ground, preloaded high-performance ball screws for high rapid traverse speeds on all axes • Telescopic guideway covers on all three axes • Main spindle SK40 with spindle speed up to 12,000 rpm with inline spindle • Massive, precision-ground milling table with five T-slots, large dimensions • Portable electronic hand wheel with enabling button and emergency stop switch, significantly simplifies program setup • Tool changer arm gripper with 30 tool positions • Coolant unit with chip flushing system and cleaning pistol • Through-spindle coolant with 20 bar pressure • Belt-type chip conveyor ensures efficient chip removal • Chip trolley • Oil separator • Machine light in the work area • Additional SIEMENS package: material defect warranty and free online/on-site service OSS Plus • 1-year maintenance contract Basic included for DE/AT/CH Control • 15.6" color display • 16:9 format Total package • Safety Integrated • Raw material recognition and processing • ShopMill step programming • Network drive management • 3D simulation • Drawing function Equipment details • Inline spindle • Taper SK 40 / DIN 69871 • Spindle speed 12,000 rpm Dimensions and weights • Length approx. 4319 mm • Width/depth approx. 2300 mm • Height approx. 3000 mm • Weight approx. 7000 kg Rapid traverse speed • X-axis 30 m/min Codpsynf Unofx Aqvjri • Y-axis 30 m/min • Z-axis 30 m/min Electrical data • Supply voltage 400 V • Mains frequency 50 Hz • Total connected load 56 kVA Horizontal milling table • Length 1200 mm • Width 600 mm • T-slot size 16 mm • Number of T-slots 5 • T-slot spacing 100 mm • Max. load capacity 800 kg Accuracy • Repeatability ± 0.005 mm • Positioning accuracy ± 0.005 mm Travel • X-axis automated 1050 mm • Y-axis automated 600 mm • Z-axis automated 600 mm Vertical spindle • Spindle taper SK 40 DIN 69871 • Speed range 12,000 rpm • Drive motor output continuous S1 20 kW • Drive motor output S6-30% operation 50.3 kW • Drive motor torque continuous S1 96 Nm • Drive motor torque 30% operation S6 240 Nm Feed force • Feed force X-axis 6.68 kN • Feed force Y-axis 6.68 kN • Feed force Z-axis 10 kN Feed motor torque • X-axis continuous S1 18 Nm • Y-axis continuous S1 18 Nm • Z-axis continuous S1 27 Nm Tool changer • Double arm gripper • Number of tool positions 30 • Maximum tool length 300 mm • Maximum tool weight 8 kg • Tool-to-tool change time 2.5 s

Condition: repair required (used), Year of construction: 1983, functionality: limited functionality, total height: 2,650 mm, total width: 3,640 mm, total length: 4,620 mm, overall weight: 6,800 kg, Technical details: X-axis travel: 1000 mm Y-axis travel: 560 mm Z-axis travel: 800 mm Rapid traverse: 6 m/min Working feed: 1- 400 mm/min. Rotary axis resolution (degrees): 0,001 Control unit: Philips 432 Spindle revolutions: 20-2000 RPM Spindle stroke: 125mm Spindle taper: ISO 50 Spindle power: 15kW Feed force axis X and Z: 8000N Feed force axis X and Z: 24000N Table size 1250 x 800 mm Table load: 800kg Programing resolution: 0,001mm Documentation for machine Codpeunwd Tjfx Aqvsri Note: Defect electronic card should be replaced. The machine is mechanicaly in excellent condition, and could easily be retrofitted with modern CNC controls.

Condition: repair required (used), Year of construction: 2003, travel distance X-axis: 1,200 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, CNC milling machine from Kunzmann for industrial machining tasks. Condition: currently not fully operational - Motor spindle does not start. Suspected cause: controller board - Potentiometer defective - Gib strips need adjustment - Maintenance unit missing Manufacturer: Kunzmann Maschinenbau GmbH Model: BA1200 Machine no.: 120006 Year of manufacture: 2003 Machine type: CNC machining center Cedpfxjyyvnwo Aqvsri Design: vertical Control: HEIDENHAIN Travel X: 1200 mm Travel Y: 600 mm Travel Z: 600 mm Table size: 1400 x 600 mm Operating voltage: 400 V / 50 Hz Control voltage: 24 V Power: 35 kVA Rated current: 50 A Main fuse: 63 A Video available on request; the spindle still turns smoothly!

Condition: good (used), Year of construction: 1981, Table size 1300 x 400 mm Tool holder DIN 2080 ISO 40 Travel ranges X-axis, automatic/manual 1000 / 1020 mm Y-axis, automatic/manual 350 / 370 mm Z-axis, automatic/manual 430 / 450 mm Speed range, 2 steps 32 – 1400 rpm Quill in vertical milling head yes Milling head, swiveling ± 90° Feed range X/Y-axis, stepless 10 – 1000 mm/min Feed range Z-axis, stepless 4 – 400 mm/min Rapid traverse X/Y-axis 5 m/min Rapid traverse Z-axis 1.8 m/min Drive power, vertical + horizontal 3.2/4 kW Crodpsd D Tf Hjfx Aqvei Space requirement L x W x H 3200 x 2700 x 2200 mm Weight 2400 kg Accessories / Special features: • NC point-to-point control HEIDENHAIN TNC 131 S • RS 232 interface • Stepless feed • Automatic and/or manual operation possible • Safety devices / prompts to secure the hand crank when the X-Y and Z axes are moved manually, as well as the manual tool clamping • Vertical and horizontal milling spindle • Quill in vertical milling head • Hydraulic axis clamping • Central lubrication • Coolant system Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Condition: used, CNC 5-Axis HMC – Horizontal Machining Center, Milling Center, Manufacturing Center Manufacturer: LICON Model: Liflex 1266 PC B1 Year of construction: 2016, Commissioned: 2017 Equipped with SIEMENS 840D SL (Solution Line) CNC path control, with 5 simultaneously controlled axes Travel paths X: 1200 mm, Y: 660 mm, Z: 650 mm A-axis as swivel bridge +/– 135° (270°) B-axis 360° continuous Axis acceleration X + Y-axis 6 m/s² Axis acceleration Z-axis 9 m/s² Feed force X + Y-axis 7500 N Feed force Z-axis 10000 N Positioning tolerance (X/Y/Z) 0.008 mm A-axis swivel speed 180° rotation in 4 sec. Interference diameter on the swivel bridge max. 1400 mm Transport load on the swivel bridge max. 700 kg Tool holder HSK 63 Crodjt Ac Efspfx Aqvji Spindle speed max. 12,000 rpm, stepless Spindle power 37kW at 40% duty cycle Spindle torque at 40% duty cycle 85 Nm Maximum spindle torque 100 Nm Tool change time (chip-to-chip) approx. 3.7 sec. Tool diameter with adjacent slots occupied Ø 140 mm Tool diameter with adjacent slots free Ø 250 mm Maximum tool length 400 mm Maximum tool weight 20 kg Power supply 400 Volt, 50 Hz Connected load 80 kVA Compressed air connection 5-8 bar - LIFLEX MSP 80/63/85/12,000 motor spindle (output 37kW/40% duty cycle) with liquid cooling and recooling unit - 2-axis rotary tilting table LICON as B- and C-axis, with hydraulic axis clamping - Zero-point clamping system on the swivel axis turntable - Dual pallet changer, without pallets (these need to be newly sourced) - Media transfer of 5 single-action pressure lines for oil or air, for workpiece clamping on the pallets Hydraulic functions from 30-150 bar, with pressure monitoring (controllable via M-functions) - Tool changer with 30 tool positions, disc turret type - Machine designed for dry machining with minimal quantity lubrication (MQL) system - MQL-TSC, internal MQL lubrication supply through the spindle - Scraper belt chip conveyor, discharge height 1150 mm - Licon ECO-Mode (energy-efficient aggregate operation) - Direct linear measurement system on all axes - Operating hours (control voltage on) ≈ 7,500 h Space required for operation L x W x H 9,000 x 5,000 x 3,800 mm Space required for transport L x W x H 6,100 x 4,400 x 3,600 mm Base machine weight approx. 21 tons Total weight: approx. 24 tons Very good condition

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, feed length X-axis: 2,500 mm, feed length Y-axis: 1,400 mm, feed length Z-axis: 1,500 mm, spindle speed (max.): 4,000 rpm, table load: 5,000 kg, CNC: SELCA 4045PD AXES TRAVELS X-axis longitudinal travel: mm 2500 Y-axis transverse travel: mm 1400 Z-axis vertical travel: mm 1500 TABLE Table size: mm 1200X1200 Load capacity: kg 5000 Number of divisions: 360.000 T-slots: No. 7 – pitch mm 127 Table axis motor power: kw 6 KOSMO 5 AUTOMATIC BI-ROTARY HEAD Continuous power: kW 28 KOSMO head spindle speed: giri/min 4.000 Plane positioning with HIRTH serration Rear plane rotation: 2,5° Front plane rotation: 3° Tool taper: DIN 69871-A50 Drawbar: DIN 69872-28 (50) PALLET CHANGER: DCN 100 CP MACHINE COMPLETE WITH • Electronic handwheel • Electronic thermal expansion compensation device for the head • High-pressure through-spindle coolnat • Chip conveyor: Double front and rear chip conveyor Csdpjzg Hqyjfx Aqvsri • Sidesalpa tool machine – 40 positions • Full enclosure • Instruction manuals • CE declaration of conformity

Condition: good (used), Year of construction: 2010, BMS 4AL CNC vertical milling machine ECS 1801 CNC Robust milling machine for a wide range of applications Meehanite cast iron construction 5HP spindle motor with inverter (variable speed) Automatic X- and Y-axis feeds with 1/2 HP motor and inverter Shelf ascent and descent with 1HP motor Large working area 305x1500 mm Spindle taper ISO 40 - Shank ø 105 mm Y- and Z-axis square guides Cedpfx Ajupg Nuoqvjri Sliding on Turcite - B X and Y axes Case-hardened table and guides

Condition: good (used), Year of construction: 2003, Vertical milling machine, UNITECH, type: FSS 315-S7, year of manufacture 2003 with 3-axis digital display ACU-RITE Codpjv A Trajfx Aqvjri Hydraulic tool clamping, synchronous milling device, coolant device. Travel paths: X 1000 mm Y 355 mm Z505 mm Table: 315 mm X 1250 mm. Spindle mount: ISO 50 Spindle speeds: 28 - 2240 rpm Machine in good condition, machine documentation available. For further data, see data sheets.

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 5752, travel distance X-axis: 1,250 mm, travel distance Y-axis: 540 mm, travel distance Z-axis: 520 mm, spindle speed (max.): 2,000 rpm, controller manufacturer: Heidenhain, TECHNICAL DETAILS Travel range, X-axis: 1,250 mm Travel range, Y-axis: 540 mm Travel range, Z-axis: 520 mm Table length: 1,800 mm Table width: 400 mm Tool holder: BT50 Main spindle power: 7.5 kW Spindle speed: 275–2,000 rpm MACHINE DETAILS Control: CNC Control system: Heidenhain Number of axes: 3 Connected power: 12 kW Dimensions & Weight Dimensions (L × W × H): 2,100 × 2,100 × 2,200 mm Net weight: 3,600 kg Number of transport packages: 2 EQUIPMENT Tools Crsdozxdxlopfx Aqvji Documentation CE marking

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 142333097, travel distance X-axis: 1,600 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 710 mm, rotational speed (max.): 6,000 rpm, table load: 2,000 kg, TECHNICAL DETAILS Travel X-axis: 1,600 mm Travel Y-axis: 800 mm Credpfxex Ap S Eo Aqvoi Travel Z-axis: 710 mm Max. spindle speed: 6,000 rpm Table dimensions (L x W): 1,800 x 800 mm Table load capacity: 2,000 kg Spindle taper: ISO 50 MACHINE DETAILS Machine dimensions: 2.73 x 4.31 x 3.03 m Length with chip conveyor: 4.31 + 1.03 m Depth with control system: 2.73 + 0.40 m Depth with coolant tank: 2.73 + 1.80 m Control unit: Heidenhain iTNC 530 Note: The machine can still be inspected under power until week 50.

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 5752, travel distance X-axis: 1,250 mm, travel distance Y-axis: 540 mm, travel distance Z-axis: 520 mm, spindle speed (max.): 2,000 rpm, table length: 1,800 mm, TECHNICAL DETAILS Travel X-axis: 1,250 mm Travel Y-axis: 540 mm Travel Z-axis: 520 mm Main spindle power: 7.5 kW Spindle speed: 275 - 2,000 rpm Table length: 1,800 mm Table width: 400 mm MACHINE DETAILS Control manufacturer: Heidenhain Number of axes: 3 Tool holder: BT50 Power: 12.0 kW Codey Avvajpfx Aqveri Dimensions & Weight Dimensions (L x W x H): 2100 x 2100 x 2200 mm Weight: 3,600 kg EQUIPMENT Tools

Condition: used, Year of construction: 2002, operating hours: 14,704 h, functionality: limited functionality, machine/vehicle number: 15115220654, travel distance X-axis: 2,200 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 660 mm, controller model: Heidenhain iTNC 530, workpiece weight (max.): 2,200 kg, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Codpfxszdd Tne Aqvjri Number of axes: 4 Travel range X-axis: 2,200 mm Travel range Y-axis: 600 mm Travel range Z-axis: 660 mm Rotation B-axis: 105° Spindle speed: max. 18,000 rpm Interface: SK40 Table size, length: 2,600 mm Table size, width: 600 mm Workpiece weight: max. 2,200 kg MACHINE DETAILS Control system: Heidenhain iTNC 530 Dimensions and weight Dimensions (L x W x H): 6,000 x 3,700 x 2,900 mm Dry weight: 12,500 kg Operating hours: 14,704 h EQUIPMENT Fourth axis with 550 mm clamping surface and hydraulic tailstock Heidenhain measuring probe Spindle cooling Measurement log Coolant tank Filter separator Documentation CE marking Note: Machine vices are not included. The machine is not immediately ready for operation and requires minor repairs. A linear field segment is causing problems.

Condition: excellent (used), Manufacturer: SHW Machine tools Type: UF 21 / UF 31 Travel distances X,Y, Z: 1000, 700,625mm Control: -Machine 1: Heidenhain TNC 355 Codpeftc Uxofx Aqvsri -Machine 2: Heidenhain TNC 415 Table: NC rotary table 1100x840mm Automatic swivel head Sleeve 120mm Milling spindle holder SK 50 Speed 2500 rpm As we offer several machines of this series, the pictures advertised are only sample pictures of comparable machines. Please send us your individual (control, table size, tilting & tilt) equipment, etc.) request, so that we can offer you a machine suitable for your requirements. MBM Maschinenservice & Gebrauchtmaschinen GmbH, is an independent specialist for SHW milling machines. Our main focus lies in the field of tool milling machines. Our services include spare parts deliveries, on-site customer service, machine overhauls and control system modernizations. Our services: - Used machines - Spare parts - Customer Service - Machine Service - Machine overhauls - Control system modernisation

Condition: repair required (used), feed length X-axis: 1,500 mm, feed length Y-axis: 600 mm, feed length Z-axis: 450 mm, Manufacturer: Reckermann Cedpfx Aeuhnznsqvjri Tip: Beta 10 Movements: X: 1500 mm Y: 600 mm Z: 450 mm Control: Sinumerik 810M Y-axis does not move, it does not stand on a reference point!

Condition: used, Machine has a defect in the main spindle CNC vertical machining center CHIRON type FZ 22 L high speed Machining center with CNC control FANUC Series 21-M serial no. 179-98 year of construction 1999 Travel X: 2000 mm, Y: 520 mm, Z: 630 mm Crsdpfsquhbgox Aqvei Table size 2700 x 570 mm Table load 525 kg (per meter) Tool holder SK 40 (DIN 69871) Drilling capacity 35 mm Tapping capacity M27 Tool diameter 75 mm Diameter with free secondary positions 105 mm Tool change speed tool - tool 2.0 sec. Tool change speed from chip to chip 4.8 sec. Distance spindle nose - table 190 to 820 mm Spindle speed max. 10,500 rpm Main spindle drive max. 18.5 kW Mains connection 400 Volt, 50 Hz, 32 kVA - Pendulum machining over 2 work areas (partition wall missing) - CNC control FANUC Series 21-M - Tool changer 40-fold - IKZ = internal coolant supply through the spindle - Spray protection cabin with sliding door - Indirect measuring system - Coolant device with chip conveyor opposite - Electronic handwheel Transport dimensions of the basic machine L x W x H 4600 x 2470 x 2950 mm Weight of the machine approx. 7.5 tons. Transport space requirement on the truck L x W x H 12000 x 2470 x 2950 mm Transport Weight on the truck approx. 10 ton. Weight 7.2 tons. good condition - machine has a defect on the main spindle

Condition: good (used), Year of construction: 1988, CNC universal console milling machine, manufacturer: KLOPP, type: FWS15, year of manufacture: 1988. CNC path control system: Heidenhain TNC 155. Travel ranges: X 1170 mm, Y: 420 mm, Z: 420 mm Work table: 1500 x 400 mm Spindle connection: SK50 Spindle power: 15 kW Spindle speeds: 35-3550 rpm Support for horizontal milling, Coolant system, chip tray, Various tool holders, Complete machine documentation. Crjdpfx Aqobu Em Aevoi Machine ready for immediate use. Workshop inspected. New parameters and batteries installed on August 20, 2020. Good overall condition. Machine can be demonstrated under power.

Condition: used, Year of construction: 1996, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, rotational speed (max.): 3,000 rpm, rotational speed (min.): 50 rpm, X-AXIS TRAVEL: 2500 MM Y-AXIS TRAVEL: 1000 MM Z-AXIS TRAVEL: 1000 MM FIXED TABLE: 1600 X 800 MM - MAXIMUM LOAD: 5000 KG ROTARY TABLE: 750 X 750 MM - MAXIMUM LOAD: 5000 KG RAPID FEED AXES: X, Y, Z: 10,000 MM/MIN SPINDLE TAPER: ISO 50 SPINDLE SPEED: 50 - 3000 RPM Csdpfx Aewz H Hmjqvjri SPINDLE MOTOR POWER: 16.5 KW NO. 2 SPEED RANGE CNC HEIDENHAIN TNC 407 AUTOMATIC HEAD HORIZONTAL - VERTICAL AUTOMATIC TOOL CHANGER