Universal milling and boring machines for sale
Identified location: (US) (Edit)
x-travel 1200 mm
y-travel 700 mm
z-travel 800 mm
spindle turning speed range 16000 U/min
Beomnhs8p8
spindle motor 12,5 kW
spindle taper: HSK 63
total power requirement 80 kW
weight of the machine ca. 24,5 t
dimensions of the machine ca. 5,3 x 3,1 x 3,7 m
CNC Control Siemens 840 D for 5 axis
KESSLER motorspindle HSK 63 - 16000 rpm
Toolchanger disk for 30 tools up to 15kg more
Manufacturer: TOS VARNSDORF a.s.
Bl2jmfjxno
Condition: in 2004 was general repair of headstock. Uused machine, in operation, currently defective - needs to be repaired: X-axis according to preliminary findings: Machining and casting of the sledge and table. Sanding the bed, sledge and table. Replacement of lubrication lines of X and B axes. Replacement of telescopic cover as required. As part of the service according to the finding repair.
axle travels: X 3500 mm, Y 2000, Z 1200
table clamping a... more
x-travel 1000 mm
y-travel 400 mm
z-travel 300 mm
table surface area 1250x350 mm
turning speeds 45-2250 U/min
milling-head swivable +/-
total power requirement kW
weight of the machine ca. t
Ut9ryjar
dimensions of the machine ca. m more
x-travel 1150 mm
y-travel 400 mm
z-travel 500 mm
spindle taper ISO 40
number of spindle speeds 35 - 1600
transmission ratio 12
upper slide-adjustment 155 mm
head swivability 45 L/R °
rapid traverse X- and Y-axis 1208 mm/min
rapid traverse Z-axis 604 mm/min
table load 600 t
table-size 350 x 1500 mm
Benofih7ko
total power requirement 5,5 kW
weight of the machine ca. 3,2 t
dimensions of the machine ca. 1840 x 2270 x 2270 m more
x-travel 700 mm
y-travel 500 mm
z-travel 450 mm
table surface area 900 x 500 mm
spindle stroke 100 mm
tool taper ISO 40
turning speed range 20 - 3150 U/min
feeds - cross 1 - 3000 mm/min
feeds - longitudinal 1 - 3000 mm/min
feed power in the axis x + z 8.000 N
feed power in the axis y 24.000 N
rapid traverse in the axis x + y 6 m/min
rapid traverse in axis z 11,4 m/min
total power requirement 40 kVA
weight of the machine ca. 3,3 t
dimensions of the machine ca. 3,8 x 3,6 x 2,2 m
electrics - volta... more
ᐸpᐳMetal milling machine
Make: STANKO
Model: SP 12
Year: 1978
Voltage: 220 V three-phase
Power: 7.5 kW
Overall dimensions: 195 cm x 220 cm x 220 cm
Ochll
Weight: 3120 kg
Digitized Machine, digital display
Conditions: Tested and in working pᐳ/pᐳ more
Table size 1067 x 229 mm
Longitudinal travel 762 mm
Cross travel 305 mm
Vertical travel 406 mm
Spindle travel 127 mm
Spindle taper ISA 30
Blhprjskwu
Spindle speeds infinitely variable 70 - 4.200 rpm
Equipped with:
Collet chucks
Milling chuck
Short arbors
Feeds on longitudinal travel
Feed on cross slide
Lighting
Coolant
Service tools etc. more
Manufacturer: TOS VARNSDORF a.s.
Condition: good, in operation
Axle travels: X 3500, Y 2000, Z 750 mm
Table clamping area: 1600 x 1800 mm
Spindle speed 1605
Spindle extension (W) 800
Clamping cone ISO 50
Oekjr
Heidenhaim 426 control system
Video: here more
x-travel 1200 mm
y-travel 350 mm
z-travel 450 mm
Inrvony
table surface area 1400x300 mm
spindle turning speed range 25-2500 U/min
spindle taper ISO 50
total power requirement kW
weight of the machine ca. 2,5 t
dimensions of the machine ca. 2,5x2x2 m more
x-travel 1150 mm
y-travel 400 mm
z-travel 500 mm
spindle taper ISO 50
number of spindle speeds 35 - 1600
transmission ratio 12
head swivability 45 L/R °
table load 600 t
table-size 350 x 1500 mm
Benoe8wxwn
feed in x - axis 10 - 1208 m/min
feed - longitudinal/cross 10 - 1208 mm/min
feeds vertical 5 - 604 mm/min
total power requirement 5,5 kW
weight of the machine ca. 3,2 t
dimensions of the machine ca. 1840 x 2270 x 2270 m more
x-travel 900 mm
y-travel 630 mm
z-travel 500 mm
table-size 1200x600 mm
spindle taper ISO 40
spindle turning speed - stepless 20-4000 U/min
CNC-control HEIDENHAIN TNC 355
quill stroke 100 mm
spindle drive 10,3 kW
weight of the machine ca. 5,2 t
dimensions of the machine ca. 4,3 x 3,3 x 2,3 m
- Heidenhain TNC 355
- NC-turntable as 4th. axis
- counter stay for knee milling operation
Nllwh
- angle milling head
- misc. milling arbors
- misc. tool holders more
Control: Dialog 12
- Travel distances approx .: X: 600 mm, Y: 500 mm, spindle nose to table: 500 mm
- Clamping surface (table dimensions) approx .: 850 x 530 mm
- rigid angle table
- Speed approx .: 5000 rpm
- Interface available
- Milling head foldable
- Screen graphics
Puqjui
- Tool holder: SK 40
- Weight approx .: 4,100 kg
- Transport dimensions approx .: L: 3.50 m, W: 2.40 m, H: 2.20 m more
Manufacturer: Czech Republic KOVOSVIT, a.s.
Condition: used, in operation
Gj2zqgrl
Y 1000, Z 1500, X 1300 mm
suggest a price, we wait for price proposal more
1985
good (used)
The machine comes from our production.
Single shift operation - Good operating condition
Description
Travels:
X-axis 700 mm
Y-axis 550 mm
Blfbduu0lp
Z-axis 500 mm
Control Heidenhain TNC 151
Tool holder SK40 with hydraulic tool clamping
Clamping surface angle table 490 X 1000 mm
milling head with quill - quill diameter 110 mm, quill stroke 100 mm
The machine is connected to the power supply and can be visited and demonstrated with pleasure.
Manuals and operating instructions are available.
We res... more
x-travel 1250 mm
y-travel 540 mm
z-travel 470 mm
spindle taper ISO 50
transmission ratio 12
head swivability 360 °
table-size 400 x 1800 mm
feed in x - axis 10 - 1208 m/min
feed - longitudinal/cross 10 - 1208 mm/min
Benoevfscm
feeds vertical 5 - 604 mm/min
table load 1000 kg
distance vertical spindle / table 50 - 520 mm
distance spindle center to column 500 mm
total power requirement 5,5 kW
weight of the machine ca. 3,2 t
dimensions of the machine ca. 3000 x 2535 x 2020 m more
x-travel 1400 mm
y-travel 630 mm
z-travel 500 mm
gear width 60 mm
spindle cone SK 50
table surface area 1800 x 500 mm
Lwpk7
table load 2 t
voltage 380 V
frequency 50 Hz
total power requirement 32 kW
weight of the machine ca. 6 t
dimensions of the machine ca. 4,2 x 5,2 x 2,35 m more
Ideal for do-it-yourselfers and toolmakers!
Table size:
Outer dimensions: 600 x 170 mm2
Blxevkwnie
Clamping height: 400 x 150 mm2
3 note tracks: 12 x 17
Engine speed: 1st stage 700 rpm
clockwise/anticlockwise rotation: 2nd stage 1400 rpm
No feeds: by hand wheels
Spindle speed
via V-belt: 4x selectable
Sk 30 Recording
Travel distances: x=280nmY
y=120nmZ
z=250nm more
x-travel 500 mm
y-travel 360 mm
Giwv00r
z-travel 400 mm
Control Siemens 810
tool taper SK 40
table surface area 800x390 mm
T-slot - width 14H7 mm
number of T-slots 6
T-slot - distance 63 mm
turning speeds 20-4000 U/min
transmission ratio 4
Feed 1-2000 mm/min
rapid traverse 5 m/min
total power requirement 9 kW
weight of the machine ca. 2 t
dimensions of the machine ca. 2,5x2,9x1,9 m more
Gear drive running in oil bath
Hollow spindle to clamp tool via M16 tightening rod
Sleeve feed for milling via handwheel
Wide speed range
8 speeds (2-step motor, thus 2 x 4 gear steps)
High concentricity accuracy due to tapered roller bearings
Mechanical quill feed for drilling via quill lever
Coupling for switching from manual rough feed to manual fine feed
Drill depth stop
User-friendly safety switch with emergency stop
Massive, exact cross table, large dimensioned and precisely machined surfa... more
New conventional milling machine and direct available
ToRen ZX 7550 CW
Movement X-Axis: 580 mm
Movement Y-Axis: 190 mm
Upper arm lateral displacement: 400 mm
Stroke sleeve: 120 mm
Min. / max. distance of the horizontal spindle nose: 70 - 320 mm
Fw0pdnf
max. distance of the vertical spindle nose: 70 - 370 mm
Spindle speed horziontal: 60-1350 1/min (9 steps)
Spindle speed vertical: 115-1750 1/min (8 steps)
Min. / max. distance between the vertical spindle nose and table: 250 - 650 mm
Spindle tap... more
x-travel 1250 mm
y-travel 500 mm
z-travel 470 mm
spindle taper ISO 50
head swivability 360 °
table-size 400 x 1800 mm
feed in x - axis 0-2 m/min
feed - longitudinal/cross 0 -2 mm/min
table load 1000 kg
distance vertical spindle / table 50 - 520 mm
distance spindle center to column 500 mm
Control
total power requirement 5,5 kW
weight of the machine ca. 3,2 t
dimensions of the machine ca. 3000 x 2535 x 2020 m
description
High quality industrial bed milling machine executed
with Huron 3D head... more
1990
good condition (used)
Mikron WF 3 DCM milling machine with Heidenhain TNC 151Q control
Oocsbkvp
Machine is in good condition, all original documentation and certificates available. Handwheel MPG pendant included. Post processor (for CamBam & HSMWorks), PC software and data cable. Also all documentation + machine parameters digitally as PDF file available.
Control supports block transfer. Machine vise and tool holders excluded.
X axis 500 mm
Y axis 500 mm
Z axis 350 mm
Table dimensions 800 x 450 mm
ISO 40-DIN208... more
repair required (used)
Maho MH 900 C
Bhwct8e7wa
without enclosure
table size 1100x650 mm
Y-axis is not displayed but moves more
x-travel 800
y-travel 650 mm
z-travel 542 mm
Control Heidenhain
type TNC 426
table surface area 800x600 mm
c-axis 1/1000 °
table - tiltable 45 Grad
swing dia. 1200 mm
spindle taper ISO 40
turning speeds 0-5000 U/min
Tool changer 30 Pos
chip conveyor
total power requirement kW
weight of the machine ca. t
dimensions of the machine ca. m
Bkn920omnw more
General characteristics
Longitudinal stroke 800 mm
Cross stroke 225 mm
Vertical stroke 440 mm
ISO 40 spindle taper
No. of Speeds 50-2000 rpm
Table Features
Bkyrdh8rbi
Table surface 1050 x 280 mm
Slot width 3 x 16 H 7
Longitudinal advance of the table 3000 mm / mi.
Cross feed of the table 3000 mm / mi.
Distance between grooves 63 mm
Rotation in both directions +/- 1000 mm / mi more
New conventional milling machine and direct available
X-travel 560 mm
Y-travel 190 mm
Table size 800 x 240 mm
Table load 150 kg
Spindle speed 75-3.200 1/min
Spindle taper MK 4
Milling head -swivelling ± 45°
Distance workpiece taper – table 460 mm
Thread M 16
Drilling capacity diameter max 32 mm
Weight of the machine ±375 kg
Length 1090 mm
Depth 1120 mm
Bknsrllzu9
Height 1900 mm
Including digital read out!
If you have any questions concerning the machine, please do not hesitate to contact ... more
Universal Milling machine
We are a metalworking company looking to sell its ald machines. Attached is a pricelist of all machines we have for sale.
Bk7t39y3xr more
Hermle UWF 1001 H / TNC 415
Year: -92/93
X-travel: 700 mm
Y-travel: 550 mm
Z-travel: 500 mm
Rigid angular clamping table: 1000 x 500 mm
Table surface area: 650 x 395 mm
N8rtr
Control: HEIDENHAIN TNC 415
Working hours: 15.000h
Artikel nr.: 930 more
Universal milling machine Reform UF 32
year of construction 1988
Guduhqp9q
10 KW
Table size 1420x320 mm more
x-travel 500 mm
y-travel 400 mm
z-travel 400 mm
quill stroke 90 mm
turning speeds 50-2500 U/min
Tool bore SK 40
Feed 8-630 mm/min
Rapid movement 1300 mm/min
table surface area 800x460 mm
number of T-slots 7
T-slots 14H7
Thr9pvdp
T-slot - distance 63 mm
Table load 400 kg
dividing head
weight of the machine ca. 1,45 t
dimensions of the machine ca. m more
x-travel 1000 mm
y-travel 360 mm
z-travel 460 mm
table: 1600 x 300 mm
turning speeds 36 - 2000 U/min
spindle taper ISO 50 SK
engine output 7,5 kW
quill stroke 0 mm
table load 0 kg.
Pukdsy
weight of the machine ca. 3.000 kg.
range L-W-H 2470 x 2100 x 1850 mm more
Milling Machine
Table size vertical 510 x 356 mm.
Table size horizontal 800x 400 mm.
Maximum table load: 300 kilo
Movement x-Axis 600 mm.
y-Axis 400 mm.
z-Axis 400 mm.
Swiveling of milling head ± 90◦
Tool taper DIN 2080 SK 40.
Bkejsjgweq
If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail.
Feel free to view our other advertisements for a complete overview of our stock. more
We offer here a used Deckel FP 2 milling machine in good used condition. Gears and spindles run quietly and cleanly. Optional with table or dividing head as shown on the photos. Year of construction approx. 1964
Bjn8mpryey more
x-travel 700 mm
y-travel 450 mm
z-travel 450 mm
Bkoala0llj
Control Heidenhain
type TNC 355
table surface area 800x500 mm
universal head
spindle taper ISO 40
total power requirement kW
weight of the machine ca. 2,7 t
dimensions of the machine ca. m more
For sale is this universal milling machine in very good condition, as can be seen on the pictures.
Usable clamping area: 630x200mmDistance between the two T-slots: 120mm
Linear motion:
with hand wheel: 320mm
with cross wheel: 265mm
automatic: 300mm
Vertical movement:
with hand wheel: 375mm
automatic 355mm
10 working feeds longitudinal and vertical, 12, 18, 26, 38, 57, 85, 125, 185, 270, 400 mm/min.
Biunt2dcae
Rapid feed longitudinal and vertical 1.2 m/min.
Weight and dimensions:
Dimensions of th... more
Milling machines with 3-axis position displayDescriptionVersatility and easy retooling. The universal milling machine with digital 3-axis position display for workshops Versatile application Robust machine design Extremely quiet running due to ground gearwheels running in an oil bath Heavy, solid design made of high-quality Meehanite cast iron All guides are hardened and can be adjusted by means of wedge strips Central lubrication Largely dimensioned handwheels with scale LED machine lamp Coolan... more
DEVLIEG 2B-36 Spiramatic with Airlift Table
Table 36″ x 24″. Spindle Taper 40ISO. Spindle Speeds 42 – 2000rpm. 3 Axis Digital Read Out.Complete with 24″ x 24″ Airlift Table. Serial Number 131937.
Biwi2skm07 more
Precisely processed
Clearly arranged control panel with user-friendly foil keypad
Safety electrical 24 v version
Easy to read digital display for speed and depth
Emergency stop pushbutton
Motor with two-stage gear for a powerful transmission of engine power
Powerful DC motor with permanent flow monitoring
Control electronics with integrated relay control
Drilling-milling head to ±90 ° tilt, for milling drilling work in every angular position
Feed screws clearance adjustable through adjustable sp... more
x-travel 500 mm
y-travel 400 mm
z-travel 400 mm
Bktobounoe
table surface area 800x480 mm
control Dialog 12
spindle speed: 32-5000 U/min
spindle taper ISO 40
Feed 5-6000 mm/min
total power requirement kW
weight of the machine ca. 2,8 t
dimensions of the machine ca. 2,8x2,4x2 m more
1986
good (used)
Product information "milling machine 50 professional DRO Vario"
Milling machine professional 50 VARIO DRO-230V
Drilling capacity in steel 30 mm.
Maximum capacity in steel 30mm
Maximum capacity cutter 100mm
Motor power of horizontal motor 1, 5kW
Motor power of vertical motor 2,2KW
Horizontal Milling spindle speed range 60-1350 U / min. (9 levels)
Vertical Milling spindle speed range 75-2000 U / Min (adjustable in two speeds)
Spindle stroke 120 mm
Nrnol28
Recording ISO 40
Table dimensio... more
1979
unexamined (used)
Universal milling machine lid FP3A
2i3lb9h7
incl. Control cabinet
Built in 1979 more
Retrofit 2012 and further overhaul 2018
Control: Heidenhain iTNC530
Tool changer 48-fold
autom. swivelling milling head holder 360 x 1 degree
autom. swivelling milling head 180 x 1 degree
Internal and external cooling
Travels:
X = 2000 mm
Y = 1300 mm
Z = 1300 mm
CNC built-in rotary table: D = 1600 mm
payload rotary table: 6000 kg
in 2018:
- complete milling head overhauled, incl. spindle bearing
- Ball bearing in X-axis replaced
- Bellows Y top new
- complete coolant system incl. high pressure p... more
Universal milling machine
Table length 120 cm
Width 30 cm
Accelerated feeds
H7vx3lnmu
Electronic readings
Ground clearance in the Z axis ok. 50 cm more
x-travel 1250 mm
y-travel 1000 mm
z-travel 1000 mm
taper ISO 50
Table dimensions 650 x 1000 mm
spindle speeds 32-1600
voltage 380 V
I3mi82bh
total power requirement 7,5 kW
weight of the machine ca. t
dimensions of the machine ca. m more
This may be of interest to you
Machineseeker becomes biggest sponsor of the 2nd Bundesliga in Germany
New Machineseeker.com TV commercial with Michael van Gerwen
Photo gallery: The World's 10 biggest excavators
Photo gallery: the 10 strongest forklift trucks in the world
Sell now on Machineseeker! Over 160,000 inquiries per month
Machineseeker now also sponsering Greuther Fürth
Didn't find what you were looking for? Please contact our partners for this category :
Dealer for Milling machines
Dealer for Milling machines