Used Travelling column milling machines for sale (121)

Condition: ready for operation (used), Butler Hi – Power Elgamill CNC Bed Type Milling Machine REFURBISHED AND RETROFITTED IN 2012 Model: HI – POWER Elgamill Year: Refurbished and retrofitted in 2012 Control: FAGOR Table Size: 5000 x 1200mm Long Travel: 3300mm Vertical Travel: 1000mm Cross Travel: 850mm Spindle Taper: 50 INT Spindle Speeds: 30 – 2080 RPM Machine with: Bob E D Iowhcbaevlewl 26” dia. power rotary table.

Condition: repair required (used), Year of construction: 1997, Functionality: limited functionality, Used Soraluce model SP 10000 traveling column CNC bed type milling centre with 2.5° automatic universal milling head, 60-station automatic tool changer and Siemens 840D control system. Serial Number: 108537. YEAR OF MANUFACTURE: 1997. Bob E D Ivowgd Rmjlewl TABLE LENGTH 10000 MM TABLE WIDTH 1100 MM COLUMN HORIZONTAL TRAVEL (X) 8500 MM HEAD VERTICAL TRAVEL (Y) 1600 MM RAM CROSS TRAVEL (Z) 1200 MM SPINDLE TAPER BT50 SPINDLE SPEEDS 20 – 2000 RPM SPINDLE MOTOR 22 Kw FEED RATES/MIN 5 – 5,000 MM RAPID TRAVERSE RATE/MIN 15,000 MM AUTO TOOLCHANGER 60 STATIONS ELECTRICAL SUPPLY 415V, 3PH, 50HZ FEATURES AND EQUIPMENT Horizontal/Vertical toolchange facility, Operators platform, Head preparation for through tool coolant, Coolant system with 500 Litre tank and 3 and 8 bars pressure 50 L/Min flow, Electronic handwheel, Heidenhain linear scales, Linear recirculating slideway system. With 1000mm diameter integrated horizontal/vertical rotary table. LENGTH 14,785 MM WIDTH 4,770 MM HEIGHT 4,420 MM WEIGHT 30,000 KGS NOTE: The information contained herein is provided in good faith, but however due to unforeseen errors or omissions cannot be binding as to accuracy.

Condition: good (used), Year of construction: 2009, Traverses X Y Z: 6300 x 1200 x 2000mm, Table 7000 x 1200mm, Bsb E D Ivowga Rpoljwl B axis 360 degrees via 1 degree increments, A axis -/+ 45 degrees via 2.5 degree increments, Heidenhain iTNC530, ISO 50 spindle taper, 15,000rpm Spindle Speed, 30 station toolchanger, high pressure through spindle coolant, Interlocked guards, swarf conveyor. New spindle fitted 2025.

Condition: ready for operation (used), Year of construction: 1997, Functionality: fully functional, Used CNC traveling column milling machine Make: ANAYAK Type: HVM 6000 Bsb Eowg Aatj D Ivlewl Year of manufacture: 1997 Control: CNC TNC426 Travel: X=5300 / Y=1200 / Z=2000 Tool magazine: 60 pcs Automatic head: B & C 2.5 indexed Table: 6000 x 1000 mm Speed: 3000 rpm

Condition: excellent (used), Year of construction: 2018, operating hours: 6,373 h, Functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 2,000 mm, LAGUN MM6 Traveling Column Milling Machine Current Specifications: - Status: Used Machine - Year of Manufacture: 2018 - Condition: Very Good - Machine Hours: 6,373 Hours (Program Run) Control: - Heidenhain iTNC 530 Linear Axis Travels: - X-Axis: 6,000 mm - Y-Axis: 1,300 mm - Z-Axis: 2,000 mm Machine Table/Plate Area: - Table Size: 7,000 mm x 2,000 mm - T-Slots: 8 x 28 mm - Slot Spacing: 250 mm Basic Technical Specifications: - Performance (S1/S6): 4,000/5,000 rpm and 1,068/1,316 Nm - X-Axis Drive: Rack and Pinion Master-slave drive - Feed rate X/Y/Z: 20,000 mm/min - Rapid traverse X/Y/Z: 20,000 mm/min Equipment: Milling head: - Automatic milling head with two swivel planes and 1° indexing Performance (S1/S6): 4,000/5,000 rpm and 1,068/1,316 Nm - Tool holder SK50 - DIN 69871A - BIG PLUS - Tool changer: 60 magazine positions Horizontal and vertical tool changing, max. tool length 500 mm, max. tool diameter 250 mm, max. tool weight 20 kg Compressed air, coolant, and chip management - 20 bar internal coolant high-pressure pump, controllable via potentiometer - Internal compressed air through the spindle - Automatic hinged chip conveyor Longitudinal direction - Additional automatic hinged-belt chip conveyor in the transverse direction Other features SIEMENS main spindle motor Bjb E Dewhfi Tj Ivlewl HEIDENHAIN axis servomotors HEIDENHAIN HR 510 handwheel HEIDENHAIN linear scales in all axes Sturdy machine structure made of cast iron GG30 55 mm linear guides 2-stage ZF gearbox Electronic heat compensation on the Y-axis Hydraulic counterbalance on the Z-axis Automatic central lubrication Coolant system Control cabinet cooling Work lamp Operating manual in German

Condition: excellent (used), Butler Elgamill Model LE Floor Type Milling Machine Serial Number 28318 Year 1990 Heidenhain CNC Control Double swivel Universal Head Spindle 50 iso Spindle drive 30HP Ram Travel 1050mm Vertical Travel of head 2,800mm Horizontal travel of Column 6,000mm 2 x T Slotted Tables 2000mm x 2000mm San Rocco Independently controlled Rotary Table 1800 x 2400mm with 1000mm of travel, load 20,000kg capacity. Bwob Ejwbpyce D Ivlsl

Condition: new, Year of construction: 2023, travel distance X-axis: 10,000 mm, travel distance Y-axis: 3,200 mm, travel distance Z-axis: 1,600 mm, Heidenhain / Siemens control Water-cooled inline motor 43 kW / 900 Nm Travels: X= 4,000 - unlimited Y= 2.600 / 3.200 Z= 1.600 Milling heads: 2.5°x2.5° / 1°x1° / 0.001°x0.001 / quill Further equipment: Tool changer 40 / 60 / 80 / 100 NC tables Plate fields Bob E D Ivjqy Hineljwl Carousel rotary tables Chip conveyor Fully automatic milling head changing system Pendulum machining Splash guard cladding Operator-supporting technology packages

Condition: used, Year of construction: 1998, Functionality: fully functional, Used Soraluce model SP 8000 traveling column CNC bed type milling centre with 2.5° automatic universal milling head, 40-station automatic toolchanger and Heidenhain 426 CB control system. Serial Number: 108540. YEAR OF MANUFACTURE: 1998. TABLE LENGTH 8000 MM TABLE WIDTH 1100 MM COLUMN HORIZONTAL TRAVEL (X) 6500 MM HEAD VERTICAL TRAVEL (Y) 1600 MM RAM CROSS TRAVEL (Z) 1200 MM SPINDLE TAPER BT50 SPINDLE SPEEDS 20 – 2000 RPM SPINDLE MOTOR 22 Kw FEED RATES/MIN 5 – 5,000 MM RAPID TRAVERSE RATE/MIN 15,000 MM AUTO TOOLCHANGER 40 STATIONS ELECTRICAL SUPPLY 415V, 3PH, 50HZ FEATURES AND EQUIPMENT Bwsb E Djwgd Rgo Ivljl Horizontal/Vertical toolchange facility, Operators platform, Head preparation for through tool coolant, Varilock R80, Coolant system with 350 Litre tank and 3 and 8 bars pressure 50 L/Min flow, Electronic handwheel, Sliding splash guard system, Heidenhain linear scales, Linear recirculating slideway system. Eimeldingen 2000mm diameter integrated rotary table with additional frontal tables extensions 5000mm x 1600mm. LENGTH 10,250 MM WIDTH EXCLUDING ADDITIONAL BEDS 4,455 MM HEIGHT 3,800 MM WEIGHT 28,000 KGS

Condition: reconditioned (used), Year of construction: 2015, Functionality: fully functional, travel distance X-axis: 8,000 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 1,500 mm, feed rate X-axis: 15,000 m/min, feed rate Y-axis: 15,000 m/min, feed rate Z-axis: 15,000 m/min, spindle speed (max.): 6,000 rpm, coolant supply: 20 bar, RepaitFIT+ by Dornhöfer Bwsb E D Ivsv R Hqrolel The difference. Including installation and commissioning! MAIN TECHNICAL DATA Year of manufacture: 2015 Capacities / Travel: Longitudinal (X): 8,000 mm Vertical (Y): 3,000 mm Transverse (Z): 1,500 mm Main spindle drive: Motor / Make: Siemens main spindle drive type: 1PH7 Maximum drive power: 41 kW Maximum torque: 1,055 Nm Speed control / Gearbox: 3-stage (oil-cooled) with automatic switching Spindle speeds 6,000 rpm: Low range: 0-918 rpm Medium range: 919-2,404 rpm High range: 2,405-6,000 rpm Axis drives / axis feeds: Axis drive motors: SIEMENS (digital) Drives) Maximum rapid traverse: (X/Y/Z axis) 25,000 mm/min Maximum working feed: (X/Y/Z axis) 15,000 mm/min Maximum feed force: (X-axis) 35,000 N (Y/Z axis) 35,000 N Drive systems: X-axis (longitudinal) pinion/rack (Atlanta brand) Y-axis (vertical) ball screw (preloaded) Ø 63x20 Z-axis (transverse) ball screw (preloaded) Ø 50x20 Machine weight: Weight FBF-M 8000 kg 41,000 without clamping table/plate array Connected load: KVA approx. 60 Paint finish: sky blue RAL 5015 / light gray RAL 7035 Tool holder: ISO 50, DIN 69871 AD Pull stud: DIN 69872 Form A HEIDENHAIN iTNC 530 HSCI Automatic MTE Diagonal milling head Automatic tool changer Cooling lubricant system with 20 bar & (internal coolant supply) Frequency control for coolant pump Air cooling through the spindle Operator platform with height adjustment of 2,300 mm and transverse travel of 800 mm Heidenhain HR 550 FS wireless handwheel Special operating mode (operating mode 4) RepairFIT+ – what does that mean? With RepairFIT+, we offer you a profitable and safe entry into our product lines. Our machines undergo a rigorous selection process, undergo a comprehensive deep-dive check, and are thoroughly cleaned by our experts. All identified defects, both technical and visual, are professionally repaired so that the machine is presented in perfect condition.

Condition: ready for operation (used), Year of construction: 2001, travel distance X-axis: 1,200 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 800 mm, Travels: X-axis 1,200 mm Y-axis 650 mm Z-axis 800 mm Spindle drive Spindle mount SK50 Drive power 23 kW Spindle speed 7,300 rpm Internal coolant supply 25 bar NC rotary indexing table For positioning and circular milling Table diameter: 980 mm Table load: 2.5 t Electrical equipment: Power consumption: approx. 50 kW Automatic tool changer with chain Number of tool positions: 31 Equipment/Accessories: Bwsb E Djwgdkto Ivlol - Torque: 680 Nm - Milling head automatically pivots from horizontal to vertical - Electric handwheel - Chip conveyor Space requirements: L x W x H: 5.4 x 3.5 x 3.5 m. Weight of the machine: approx. 12 t

Condition: ready for operation (used), Year of construction: 1998, FPT SIRIO 8 CNC TNC 430 column milling machine X 8000 Y 1200 Z 2000 Automatic head 144 x 144 Speed 3000 rpm - BT 50 - Center coolant ATC 60 stations Fixed table 6000 x 2500 x 300 Rototranslating table 1500 x 1500, stroke 1500 - Permissible weight 10 t Bob E D Ijwgmp Ejvlowl Chip conveyor

Condition: good (used), Year of construction: 1999, Ref. -No.: 10522 Manufacturer: SORALUCE Type: SP 6000 Year of construction: 1999 Type of control: CNC Control: HEIDENHAIN Beb E Dowfy Hue Ivlowl Storage location: Halberstadt Country of origin: Spain X-Travel: 4500 mm Y-Travel: 1200 mm Z-Travel: 1600 mm Feed: 5000 mm / min Rapid Traverse X/Y/Z: 15 m / min Table surface area (LxW): 6000 x 1000 mm Tool Taper: SK 50 Spindle Speeds: 67 - 4.000 RPM Distance table - spindle nose with vertical milling spindle: 870 mm Further information: incl. accessories, tools, fixtures Machine is in production and can be inspected under power at any time.

Condition: new, Year of construction: 2023, Longitudinal x 10000 mm Vertical Y 2200 mm transverse Z 1300 mm tool holder ISO 50 Control Heidenhain TNC 640 milling head 2,5° 6000 rev. IKZ changer 60 pockets panel field Bwsb E Doglpz Rj Ivljl 11000 x 2500 x 300 mm

Condition: good (used), Year of construction: 2001, Functionality: fully functional, machine/vehicle number: 6011, Used Soraluce FP-8000 Travelling Column Floor Type milling machine with HEIDENHAIN TNC430CA control and 60ATC Year of manufacture 2001 MACHINE CONSTRUCTION, FEATURES & FITTED OPTIONS • Travelling Column Floor Type Design. • High Performance Linear Guideways. • Orthogonal Auto Indexing Milling Head - 2.5° x 2.5° • X / Y / Z Linear Scales. • 2 off 800mm dimeter indexing tables without any top T slotted platens • Full Length Swarf Conveyor. • Operator’s Platform. TRAVELS – MAIN MACHINE Longitudinal Travel (X-Axis) - 8,000 MM Vertical Travel (Y-Axis) - 2,000 MM Ram Travel (Z-Axis) - 1,200 MM SPINDLE HEAD Spindle Nose Taper - BT-50 Pull Stud - MAS BT50 Type 2 Spindle Speeds - 2 Ranges - 11.4 ~ 230 & 923 ~ 3,000 RPM Spindle Power - 30.0 KW Bwjb E D Iveuqytvolsl FEEDS Cutting Feedrate - 5 ~ 5,000 MM / MIN Rapid Traverse (X-Axis) - 15 M / MIN Rapid Traverse (Y-Axis) - 15 M / MIN Rapid Traverse (Z-Axis) - 15 M / MIN Feed Motor (X-Axis) - 57 NM Feed Motor (Y-Axis) - 27 NM Feed Motor (Z-Axis) - 27 NM ATC Tool Storage Capacity - 60 Station Chain Type Tool Shank - ISO-50 MOTOR Spindle Drive Motor - 30.0 KW POWER SUPPLY Voltage - 415V / 50HZ / 3PH SIZE AND WEIGHT Floor Space - 14500 X 6,500 MM Height - 5,250 MM Weight - 25,000 KGS

Condition: reconditioned (used), Year of construction: 2002, travel distance X-axis: 16,000 mm, travel distance Y-axis: 3,200 mm, travel distance Z-axis: 1,500 mm, rapid traverse X-axis: 15,000 m/min, rapid traverse Y-axis: 15,000 m/min, rapid traverse Z-axis: 15,000 m/min, spindle speed (max.): 4,000 rpm, spindle speed (min.): 20 rpm, 100% Retrofit by Dornhöfer The Difference. Including installation and commissioning! Year of manufacture: 2002 Control: Heidenhain TNC 640 / TNC 7 Travel: X-axis (mm) 16,000* (see below) Y-axis (mm) 3,200 Z-axis (mm) 1,500 Spindle speed range: 20–4,000 rpm Feed rates: X, Y & Z axes (mm/min): 2–12,000 Beb Ejv S Upfo D Ivlswl Max. rapid traverse speed X, Y & Z axes (mm/min): 15,000 Milling head: Automatic milling head, orthogonal H10, 1° pitch Tool holder: ISO 50, DIN 69871 AD Main spindle drive power: 100% duty cycle KW37 - Automatic tool changer with 60 magazine positions - Coolant system with 20 bar & (IKZ) - Chip conveyor, floor ejection - Ergonomic operator platform - Hazardous area protection - 3D thermal expansion compensation - INA linear guides *Adaptive X-axis length: We supply the machine bed in the length you require, up to a maximum of 16,000 mm. 100% RetroFIT – our core business! For us, it means offering a machine that can only be compared to a new product, but also offers you many other advantages: Latest CNC control technology with proven machine stability Significant CO₂ savings compared to a new machine Shorter delivery times Often savings on complex foundation costs Significantly lower investment costs All mechanical components (e.g., ball screws, guides, rolling bearings, etc.) have been renewed. Our designers designed the entire electrical peripherals (such as the most modern drive, control, and regulation technology) using the most efficient technologies. This was implemented using new cabling and a completely new control cabinet, as well as the latest Heidenhain control system with a wide range of innovative options. The completely new and innovative hydraulic concept meets the most modern requirements and achieves maximum efficiency. The machine's visual appearance is in no way inferior to a new machine thanks to its refurbishment: The entire machine was first disassembled down to every screw, sanded, primed, and then painted with a robust 2K EP paint. We equipped the machine with a safety concept that is individually tailored to the needs of the operator. We offer the highest level of safety, flexibility, and ergonomics. You receive a state-of-the-art machine combined with significant CO₂ savings.

Condition: excellent (used), Year of construction: 2001, Functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 2,600 mm, travel distance Z-axis: 1,500 mm, tool mount: 50 mm, rapid traverse X-axis: 12 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 15 m/min, feed rate X-axis: 12 m/min, feed rate Y-axis: 12 m/min, feed rate Z-axis: 15 m/min, spindle speed (max.): 4,000 rpm, spindle speed (min.): 22 rpm, table length: 6,000 mm, table width: 3,000 mm, year of last overhaul: 2017, power: 0.037 kW (0.05 HP), Equipment: documentation/manual, rotational speed infinitely variable, Offer number V(F)-6895 CNC traveling column milling machine Make SHW Type UniForce 6L Year of construction 2001/2017 overhauled by SHW Control Heidenhain TNC 430M Panel field: 6,000 x 3,000 x 300 mm Travel paths: Longitudinal column travel X 6,000 mm Vertical travel Y 2,600 mm Milling slide transverse path Z1,500 mm Cutting feeds X,Y 2 - 12,000 mm/min. Z 2 - 15,000 mm/min. Automatic head indexing in two planes 340 x 1° / 180 x 1° Spindle drive power 37 / 53 kW Spindle speeds 22 - 4,000 rpm Gear stages (autom.) 2 Spindle holder SK50 DIN 69871 Tool holder SK 50 Bwob E D Iotn A U Uevlsl Tool magazine/automatic tool changer: Tool magazine positions 66 Tool diameter with/without adjacent tools max. 125 /250 mm Tool length max. 400 mm Tool weight max. 25 kg Accessories/equipment: Automatic indexing of the milling head 340 x 1°/180 x 1°. Heidenhain external electronic handwheel HR 410. Linear scales for X, Y and Z axes. Internal/external coolant 10/16 bar. Paper belt filtration unit for coolant. Switchover from internal/external coolant supply to air. Oil cooler for the headstock. Automatic headstock level control - Electromechanical control via 2 vertical ball screws with separate drives, measuring systems and axes. Operating platform with integrated CNC control panel, movable in the X-axis. Radio measuring probe. Chip conveyor 6000 x 350 x 1250 mm. Ethernet interface. Condition Very good condition. Completely overhauled by the manufacturer in 2017 and then delivered to our customer. The machine has been used normally since then.

Condition: excellent (used), Year of construction: 2004, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 3,600 mm, Travels: X-axis (lengthwise): 6.000 mm Y-axis (cross): 1.500 mm Z-axis (vertical): 3.600 mm W-axis (Table): 2.000 mm Spindle speeds in 2 steps: 20 up to 4.000 rpm Torque: 1.410 Nm Clamping force: 20.000 N Feed rates X/Y/Z: 2 up to 12.000 mm/min Rapid traverse X-/Y- and Z-axis: 20.000/15.000/25.000 mm/min Drive of the milling spindle at 100% ED: 37 kW EQUIPMENT: CNC-controlled hydrostatic rotary and sliding table, Brand: RÜCKLE, Type: PKTF 8, Year of construction: 1996 -Clamping surface: 2.980 x 3.500 mm -V-axis: 2.000 mm -Table load approx.: 30 tons 120-position tool changer -Tool diameter max.: 125 mm – with free adjacent seats: 250 mm -Tool length max.: 400 mm -Tool weight max.: 30 kg Bwsb E Dotw Tx Te Ivljl Tool holder (DIN 69871 Form AD): ISO 50 Mobile operator platform Electronic hand wheel HR 420 Chip conveyor 3D thermal expansion compensation Z-axis with level control Tapping without compensating chuck (ratio 1:1) Touch probe system M&H 20.00 wireless Full protection cabin + movable chip protection wall for the rotary table (Setup side/working side) 4-fold milling head changer / Pick-up station 1 piece of Universal milling head , 1° x 2,5° (indexing in the CNC programme) 360 Rear level positions / 144 Front level positions 1 piece of Horizontal milling attachment 1 piece of Universal milling head / Fabrikat: HENNINGER, Type: 880-40 – ISO 40 Internal and external cooling through the spindle Total connected load: 75 kVA Machine weight: 36,2 tons Space requirement (Length x Width x Height) including RÜCKLE table approx.: 12.435 x 8.420 x 5.085 mm

Condition: excellent (used), travel distance X-axis: 5,000 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 1,500 mm, rapid traverse X-axis: 8 m/min, rapid traverse Y-axis: 8 m/min, rapid traverse Z-axis: 8 m/min, feed rate X-axis: 8 m/min, feed rate Y-axis: 8 m/min, feed rate Z-axis: 8 m/min, pivoting range: 340 °, table length: 5,000 mm, table width: 1,730 mm, worktable width: 1,730 mm, worktable length: 5,000 mm, Technical Specifications Travel Paths • X-axis (bed): 5,000 mm • Y-axis (vertical): 1,600 mm • Z-axis (headstock): 1,500 (1,200) mm Control System • CNC control: Heidenhain TNC 415 Feed Rate • X-, Y-, and Z-axes continuously variable from: 2 – 8,000 mm/min Universal milling head in orthogonal design • Motorized milling head swivel range: 340 degrees • Milling head swivel range: 180 degrees • Tool holder: SK 50 Clamping Plate • Clamping area: 5,000 mm x 1,730 mm • T-slots: 9 x 28 DIN 650 • T-slot spacing: 160 mm Year of manufacture: 1992 Partial overhaul: 2025 The machine can be demonstrated live in D-73479 Ellwangen. About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our focus is on tool-milling machines. Our services include spare parts deliveries, on-site customer service, machine overhauls, and control system upgrades. Services: - Used machines - Spare parts - Customer service - Machine service - Machine overhauls - Control system modernization _____ Bwob E Dewfd Dks Ivlel Used machine – used milling machine – used traveling column milling machine – orthogonal milling head – metalworking – tool milling machine – milling head – SHW machine – SHW spare parts – used milling machine – used milling machine – used CNC milling machine – used drilling and milling machine – used metal milling machine – used metal milling machine – used metal milling machine – used CNC milling machine – CNC milling machines – CNC milling machines – milling machine – large-part machining – large-part machining – large-part machining – CNC large-part machining – milling – SHW – UF6 – UF 6 – Uniforce – SHW UF – SHW Uniforce – SHW Uniforce 6 – UFZ 6 – UFZ6L – UFZ 6 L – Heidenhain – MBM milling machine – MBM machine – column milling machine

Condition: new, Year of construction: 2023, travel distance X-axis: 12,000 mm, travel distance Y-axis: 4,000 mm, travel distance Z-axis: 1,600 mm, Heidenhain / Siemens control Water-cooled inline motor 43 kW / 900 Nm Travels: X= 4,000 - unlimited Y= 3.600 / 4.000 Z= 1.600 Milling heads: 2.5°x2.5° / 1°x1° / 0.001°x0.001 / quill Bwjb E D Ivjqy Hkaelol Further equipment: Tool changer 40 / 60 / 80 / 100 NC tables Plate fields Carousel rotary tables Chip conveyor Fully automatic milling head changing system Pendulum machining Splash guard cladding Operator-supporting technology packages

Condition: good (used), Year of construction: 2002, Functionality: fully functional, USED Soraluce Soramill Model SP 10000 Travelling Column, Table Type CNC Milling Centre, with Automatic Oil Mist Lubricated Orthogonal Milling Head with 1 X 1 Degree Indexing and HEIDENHAIN TNC 430 M Control System. Year 2002 SN 8647 Bob E D Iveuv Hrdsljwl Table Area - 10000 x 1100 mm Column Traverse (X) - 8500 mm Vertical Traverse (Y) - 1600 mm Ram Traverse (Z) - 1200 mm Spindle Motor - 28 kW Spindle Taper - Standard ISO 50 BT50 tooling Pullstud - DIN 6987 2-Form A. ISO 7388/2-Form A Independent Gearbox with 2 Ranges Speed Range - 20 to 4000 RPM Feed Range - 5 to 5000 mm/min Rapid traverse rate - (X, Y, Z) 15,000 mm/min Preloaded double nuts and recirculating ballscrews to each axis. Linear Guiding System with recirculating cylindrical rollers and steel guideway assemblies in X, Y and Z axes Independent A.C Drive motor to each axis. Linear Transducer in X, Y and Z-axes with air purge system. Automatic tool clamping. Automatic hydraulic tool releasing device. CNC Control HEIDENHAIN TNC-430-M. (Flat TFT screen with digital drives) 9 axes CNC and 1 spindle, 5 of them simultaneously interpolated. Working area lighting Electrical cabinet cooling system Electrical cabinet lighting Heidenhain HR410 portable electronic handwheel with 3m spiral cable Horizontally articulated pendant for CNC control Orthogonal head 28KW, 800Nm, 1deg x 1 deg, 4000rpm oil lubricated Price includes oil cooling unit for both head and gearbox. Option G2, Ram prepared for 4000rpm, is also included. Coolant through the spindle type AD. Coolant system with 500l capacity tank with two pumps providing low and high pressure of 3 and 8 bars and 50l/min flow. The system includes a combined paper and magnetic drum-filtering unit. Standard operators platform fixed to the column 40 tools capacity toolchanger magazine, BT50 Max. Tool length = 400 mm. Max. Tool diameter: - With full magazine = 120 mm. With adjacent position empty = 250 mm. Max. Tool weight = 20 kg. Mean tool weight with full magazine = 10 kg. Max. Permitted total weight = 20 kg. Swarf Conveyor Hinge type conveyor belt Machine preparation for the addition of a 4th axis electro-mechanical table. Splash Guarding against swarf at the table front and both sides. Consists of four sliding front doors with a height from the floor of 2.100mm and a length of 1.700mm each one. Manually operated opening and closing with mechanical interlock. The doors can be opened for the full longitudinal traverse. The rear of the table is open. Protection in the back and both lateral sides of the machine column.

Condition: reconditioned (used), Year of construction: 2012, Functionality: fully functional, travel distance X-axis: 10,500 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,500 mm, rapid traverse X-axis: 25,000 m/min, rapid traverse Y-axis: 25,000 m/min, rapid traverse Z-axis: 25,000 m/min, spindle speed (max.): 4,000 rpm, spindle speed (min.): 20 rpm, table length: 12,000 mm, table width: 1,350 mm, year of last overhaul: 2025, RepaitFIT by Dornhöfer The difference. Including installation and commissioning! Bweb E Dov R Tpuo Ivlol Technical details of the machine: Year of manufacture: 2012 Control: Heidenhain iTNC 530 Travel range: X-axis (mm) 10,500 Y-axis (mm) 2,000 Z-axis (mm) 1,500 Table size: Length: 12,000 Width: 1,350 Spindle speed range: 20–4,000 rpm Feed rates: Max. rapid traverse speed X, Y & Z axes (mm/min): 25,000 Milling head: Orthogonal milling head, 1° pitch H41 Tool holder: ISO 50, DIN 69871 Form AD Main spindle drive power: 100% duty cycle 43 kW - Chip conveyor - Internal coolant system (Lubrix) - Automatic tool changer with 40 magazine positions - Portable HEIDENHAIN HR 410 electronic handwheel - 3D thermal expansion compensation - Heidenhain interpolation turning RepairFIT is our proven offering for a profitable entry into our product lines. The machines available in this line are procured by us following a rigorous selection process and subjected to a thorough inspection (deep dive check). After intensive cleaning, any obvious defects and faults identified are professionally repaired by our expert service team.

Condition: excellent (used), travel distance X-axis: 8,000 mm, travel distance Y-axis: 2,600 mm, travel distance Z-axis: 1,600 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, feed rate X-axis: 20 m/min, feed rate Y-axis: 24 m/min, feed rate Z-axis: 24 m/min, spindle speed (max.): 3,200 rpm, rotational speed (max.): 3,200 rpm, pivoting range: 360 °, year of last overhaul: 2022, coolant supply: 16 bar, ejection height: 1,250 mm, tank capacity: 800 l, Technical Specifications Travel Paths • X-axis (bed): 8,000 mm • Y-axis (vertical): 2,600 mm • Z-axis (headstock horizontal): 1,600 mm Control System • CNC control: Heidenhain iTNC 530 Feed Rate • Y- and Z-axis continuously adjustable from: 2 – 24,000 mm/min • X-axis continuously adjustable from: 2 – 20,000 mm/min Universal milling head with orthogonal design • Milling head swivel range: 360 x 1 degree • Milling head swivel range: 180 x 1 degree • Tool holder: SK 50 DIN 69871 • Speed: 3,200 rpm Chip Conveyor • Ejection height above floor: 1,250 mm • Feed length: 8,000 mm mm • Feed width: 350 mm Coolant system • Paper belt filter system o Tank capacity: 800 l o Pump capacity on the machine: 16 bar o Approx. 32 l/min Year of manufacture: 2005 • 2016: General overhaul of the headstock unit • 2022: General overhaul of the milling head Bjb E D Ivewfdalslowl About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our focus is on tool-milling machines. Our services include spare parts deliveries, on-site customer service, machine overhauls, and control system upgrades. Services: - Used machines - Spare parts - Customer service - Machine service - Machine overhauls - Control system modernization _____ _____ _____ Used machine - used milling machine - used traveling column milling machine - orthogonal milling head - metalworking - tool milling machine - milling head - SHW machine - SHW spare parts - used milling machine - used milling machine - used CNC milling machine - used drilling and milling machine - used metal milling machine - used metal milling machine - used metal milling machine - used CNC milling machine - CNC milling machines - CNC milling machines - milling machine - large-part machining - large-part machining - large-part machining - CNC large-part machining - milling - SHW - UF6 - UF 6 - Uniforce - SHW UF - SHW Uniforce - SHW Uniforce 6 - UFZ 6 - UFZ6L - UFZ 6 L - Heidenhain - MBM milling machine - MBM machine - column milling machine

Condition: good (used), Year of construction: 2001, Functionality: fully functional, machine/vehicle number: 6011, Used Soraluce FP-8000 Travelling Column Floor Type milling machine with HEIDENHAIN TNC430CA control and 60ATC Year of manufacture 2001 MACHINE CONSTRUCTION, FEATURES & FITTED OPTIONS • Travelling Column Floor Type Design. • High Performance Linear Guideways. • Orthogonal Auto Indexing Milling Head - 2.5° x 2.5° • X / Y / Z Linear Scales. • 2 off 800mm dimeter indexing tables without any top T slotted platens Bwob E D Ivsuv Hn Solol • Full Length Swarf Conveyor. • Operator’s Platform. TRAVELS – MAIN MACHINE Longitudinal Travel (X-Axis) - 8,000 MM Vertical Travel (Y-Axis) - 2,000 MM Ram Travel (Z-Axis) - 1,200 MM SPINDLE HEAD Spindle Nose Taper - BT-50 Pull Stud - MAS BT50 Type 2 Spindle Speeds - 2 Ranges - 11.4 ~ 230 & 923 ~ 3,000 RPM Spindle Power - 30.0 KW FEEDS Cutting Feedrate - 5 ~ 5,000 MM / MIN Rapid Traverse (X-Axis) - 15 M / MIN Rapid Traverse (Y-Axis) - 15 M / MIN Rapid Traverse (Z-Axis) - 15 M / MIN Feed Motor (X-Axis) - 57 NM Feed Motor (Y-Axis) - 27 NM Feed Motor (Z-Axis) - 27 NM ATC Tool Storage Capacity - 60 Station Chain Type Tool Shank - ISO-50 MOTOR Spindle Drive Motor - 30.0 KW POWER SUPPLY Voltage - 415V / 50HZ / 3PH SIZE AND WEIGHT Floor Space - 14500 X 6,500 MM Height - 5,250 MM Weight - 25,000 KGS

Condition: reconditioned (used), Year of construction: 2015, Functionality: fully functional, travel distance X-axis: 10,000 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 1,500 mm, rapid traverse X-axis: 25,000 m/min, rapid traverse Y-axis: 25,000 m/min, rapid traverse Z-axis: 25,000 m/min, spindle speed (max.): 4,000 rpm, RepaitFIT+ by Dornhöfer The difference. Including installation and commissioning! MAIN TECHNICAL DATA Year of manufacture: 2015 Capacities / Travel: Longitudinal (X): 10,000 mm Vertical (Y): 3,000 mm Transverse (Z): 1,500 mm Paint finish: Graphite gray RAL 7024 / Agate gray RAL 7038 Tool holder: ISO 50, DIN 69871 AD Pull stud: DIN 69872 Form A Taper: DIN 69871 Main drive: Motor / Make: Siemens Main spindle drive Tap: 1PH7 Maximum drive power: From 198 rpm 100% duty cycle KW41 Maximum torque: Constant up to 198 rpm 100% duty cycle 1920 Nm Speed control / Gearbox: 3-stage (oil-cooled) With automatic Switching Spindle speeds 4000 rpm: low range rpm 0 - 516 medium range rpm 460 - 1,288 high range rpm 1,200 - 4,000 Axis drives/axis feeds: Axis drive motors: Maximum rapid traverse: (X/Y/Z axis) 25,000 mm/min Maximum working feed: (X/Y/Z axis) 15,000 mm/min Maximum feed force: (X-axis) 35,000 N (Y/Z axis) 32,000 N Axis drive systems: X-axis (longitudinal) pinion/rack (Atlanta brand) Y-axis (vertical) ball screw (preloaded) Ø 63 x 20 Z-axis (transverse) Ball screw (preloaded) Ø 50 x 20 Bjb Esv R Hwre D Ivljwl Weight: (without clamping table/plate area) approx. 49,500 kg Connection cable: approx. 60 kVA Innotrol HBG wireless handwheel Automatic tool changer with 60 magazine positions BIG Plus tool spindle Operator platform with height adjustment of 1800 mm and transverse adjustment of 800 mm Interface for adapter milling heads RepairFIT+ – what does it mean? With RepairFIT+, we offer you a profitable and safe entry into our product lines. Our machines undergo a rigorous selection process, undergo a comprehensive deep-dive inspection, and are thoroughly cleaned by our experts. All identified defects, both technical and cosmetic, are professionally repaired so that the machine is presented in perfect condition.

Condition: reconditioned (used), travel distance X-axis: 10,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 2,100 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, spindle speed (max.): 6,000 rpm, spindle speed (min.): 36 rpm, rotational speed (max.): 6,000 rpm, tank capacity: 1,200 l, SHW Powerspeed 5 Bjb Eov Dhw To D Ivlewl Travel paths • X-axis (bed): 10,000 mm • Y-axis (headstock): 1,300 mm • Z-axis (vertical): 2,100 mm Control • CNC control: Heidenhain iTNC 530 Feed rate • X, Y and Z axes: 30,000 mm/min • Acceleration: 3.5 m/s² Universal milling head in orthogonal design • Milling head holder swivel range: 360 x 1 degree • Milling head swivel range: 180 x 1 degree • Tool holder: SK 50 DIN 69871 • Speed range: 36 - 6,000 rpm Chip conveyor • Feed length: 10,000 mm Coolant system • Container capacity: 1,200 Liter ATTENTION the images are comparison images About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our main focus is on tool milling machines. Our services include spare parts deliveries, on-site customer service, machine overhauls and control system modernizations. Services: - Used machines - Spare parts - Customer service - Machine service - Machine overhauls - Control system modernization _____ Used machine - used milling machine - used traveling column milling machine - orthogonal milling head - metalworking - tool milling machine - milling head - SHW machine - SHW spare parts - used milling machine - used milling machine - used CNC milling machine - used drilling and milling machine - used metal milling machine - used metal milling machine - used metal milling machine - used CNC milling machine - CNC milling machines - CNC milling machines - milling machine - large part machining - large part machining - large part machining - CNC large part machining - milling - shw - PS5 - PS 5 - Powerspeed - SHW PSZ 5 - SHW Powerspeed - SHW Powerspeed 5 - PSZ 5 - PSZ 5 - Heidenhain - MBM milling machine - MBM machine - column milling machine