table length:900 mm
table width:250 mm
feed speeds:20 - 1000 mm/min
spindle turning speed range:250 - 2500 U/min
total power requirement:3 kW
weight of the machine ca.:2,5 t
dimensions of the machine ca.:2 x 1,5 x 1,8 m
x-travel: 400 mm
y-travel: 100 mm
z-travel: 100 mm
electrics - voltage/frequency: 380/50 V/Hz
total power requirement: 0,8 kW
machine weight approx.: 80 kg
space requirements of the machine approx.: 1,6 x 0,6 x 1,4 m
This milling machine is ideally suited for window.
- long hole milling machine for aluminium
- pneumatic tool clamping
- feeder: hand lever operation
- safety device: 2,2 V
- table 900x500 mm
- Groove width: 70 mm
- X-way: 800 mm
- coolant device
- Weight approx. 1000 kg
- Hofmann - manual dividing device
- Self-made coolant collecting tray with hanging tool cabinets
Condition: cpl. Approx. 5 years ago obsolete
Delivery: ex warehouse - as viewed
Payment: strictly net - after receipt of invoice
Used grooving machine
Internal machine number m3154
Type NF 1 / REP
year of manufacture 1969/89
Ma. No. 1 / 615
clamping surface 600 x 250 mm
slot length up to 200 mm
slot width up to 30 mm
Groove depth up to 100 mm
drive power 1,4/2,2 kW
Speeds from 350 to 3.500 rpm.
Weight approx. 950 kg
Article location: 58730 Fröndenberg/Ruhr
The machine can be inspected and tested under power.
We will gladly send you more photos by e-mail.
A forklift / crane for loading is availa...
groove width:16 mm
spindle taper ISO:40
spindle motor:3 kW
spindle turning speed range:300 - 3600 U/min
quill stroke:150 mm
diameter of quill:100 mm
table surface area:1800 x 250 mm
total power requirement:9,5 kW
weight of the machine ca.:2,7 t
dimensions of the machine ca.:3,5 x 2,7 x 2,5 m
CNC SIEMENS 810 M
Indexing head with tailstock
4-fold toll changer table mounted
T-slot machine FAB. HURTH type LFV 3
Masch.# 3566 estimated built 1963
Keyway width max. 30,35 mm
Traverse path x 550 mm
Travel Y 300 mm
Z stroke 400 mm
Spindle retainer ISO SK 40
Milling slide way 240 mm
Blade feed spindle stroke 0-110 mm
Table size 300 x 1200 mm
Table width 350 mm
Throat depth 415 mm
8 spindle speeds 90-1000 rpm
9 crank feeds 1,4 22,4 p. min.
9 table feeds along 10.9 163 mm / min
Table drive 0.37 kW
Spindle drive approximately 2.5 kW
1 branded groove milling machine make: HURTH , type:LFV 1 table size 875 mm x 270 mm, speed 180 - 2800 rpm in 9 steps, stroke max.180 mm depth adjustment max 100 mm, collet chuck holder with collet chuck set operating key, operating instructions.
Dimensions: , width 1150 mm, depth 1300 mm, height 1750 mm.
Weight: approx. 1100Kg
The machine is visually and technically in good condition and functions perfectly. Gladly you can visit the machine in our warehouse under power and test to convince them...
Vertical slot milling machine, with shaft vice V 2 and various collets.
Traverse path milling head x-axis 200 mm
milling head y-axis 2 mm
sleeve z-axis 100 mm
Distance spindle centre to stand 200 mm
table surface 900 x 250 mm
Speeds spindle there. 450 - 3500 rpm.
Total drive power approx. 4 kW
Total weight approx. 1.1 t
T-slot machine Fabr. Bush type NF 1
Masch. # 1/494 1963 model
Throat depth 200 mm
Spindellaengsweg 250 mm
Table size 250 x 610 mm
4 spindle speeds 380-1500 rpm.
External dimensions 1050 x 900 x 1800 mm
used, in good condition
Aut. Keyway broaches and mortising Fabr. RUWO TAP VILLAGE
Type AF 56 Masch. # 63/2445/1 year 1963
Flute length 350 / 400 mm
Keyway width up to 50 mm
Groove depth 15-40 mm
Advance 0.1 - 0.5 mm depth
Division of service 0.1 mm
Page feed 50 / 80 / 120 mm / min
7 spindle speeds 180-1000 rpm.
Gr. Shaft diameter 170 / 330 mm
Tool holder MK 2
Drive power 1.1 / 0.6 PS
Power of the page feed 0.17 HP
Dimensions L x W x H 1000 x 500 x 1100 mm
Weight approx. 270 kg
The Machineseeker Trust Seal gives buyers the opportunity to see, at a glance, whether they are dealing with a trustworthy seller.
What do we verify?
Check of trade licence or commercial register extract
Check the address of the dealer
Validation of Bank connection
Verification of accessibility to main phone number
Credit report may not contain negative criteria
Buyer complaints can lead to withdrawal of the seal
What does this mean for the seller?
After successful verification, we will include the seal in your advertisements on Machineseeker. In this way, you signal to every potential buyer the seriousness of your company, checked by an independent body. This creates buyer confidence and increases the probability of successfully selling machines. In addition, you have the option of including the Machineseeker Trust Seal on your homepage and in business letters.
Try our app for used machines now!
Machineseeker app for iPhone and Android.
All information, offers and prices on this website are subject to change and non-binding!
Designated trademarks belong to their respective holders.
Machineseeker Group GmbH Does not assume liability for the content of linked external websites.