Used Vertical Milling Center for sale (23,483)

Condition: used, Year of construction: 2023, x-travel 3000 mm y-travel 820 mm z-travel 720 mm Control Mazatrol Smooth G spindle taper SK 40 spindle turning speed range 35 - 12.000 U/min spindle motor 15 kW distance spindle centre table top edge 140 - 860 mm table load 2500 Kg rapid travel x/y/z 50 m/min table width 3500 mm table length 820 mm table height over floor 870 mm T-slots 7 T-slot - width 18 mm T-slot - distance 100 mm tool change unit 48 tool changing time 4,7 sec wotkpiece diameter with 2 vacant positions 130 mm workpiece diameter at full load 80 mm max. tool weight 8 kg tool length - max. 350 mm air pressure - required 5 - 9 bar Air volume 260 l/min electrics - voltage/frequency 400 / 50 V/Hz coolant tank 500 l total power requirement 46,7 kW weight of the machine ca. 15,4 t dimensions of the machine ca. 5,3 x 3,6 x 3,3 m Standard machine including the following optional extras: - Provision for dual oil mist extraction - Air cooling via the rotating milling spindle - 48-tool magazine - Pulse handwheel - 3-colour LED signal light - Additional work area lighting - Air blow-off device on the milling spindle - High-pressure coolant supply through the spindle (15 bar) - Provision for MAZAK Monitoring - Chip conveyor with left-hand ejection (Crowther) - Manual grease gun - Grease cartridge - Mazak API - Drilling cycle with automatic chip breaking - Synchronous thread cutting - Rapid traverse with constant angle of inclination STANDARD ACCESSORIES Adaptation for the European market USB port (1 port) Mazak standard colour Work area lighting SAFETY FEATURES Operator door with interlock switch Work area cladding The splash guard enclosure encloses the work area from the side. Fully enclosed work area Protection against chips, coolant and access to the work area during automatic machining. Safety precautions in accordance with global standards COOLANT SUPPLY Coolant supply via spindle (pump pressure = 5 bar) Complete coolant system includes pumps, valves, pipework and nozzles for the efficient production of high-quality components. FACTORY AUTOMATION Automatic start/stop and warm-up function Automatic activation of a warm-up via digital timer MEASURING SYSTEM Tool length measurement and tool breakage detection NUMERICAL CONTROL Kjdpfsyvvluox Aalsww Horizontally adjustable NC control panel Relocation Detector Mazatrol SmoothG control 19" colour LCD screen (touch screen) Mazak Tornado tapping/drilling cycle (Mazatrol) EIA/ISO input function Tool path verification in the background 3D coordinate conversion Shape compensation for rotating axes Mazacc-2D software (contour correction) Mazacc-3D software package MAZACC-3D high-speed software package (NO456) is additionally required. Control system with high smoothing Interface for LAN SD memory card interface Smooth Standard Software for M/C - NO443 B) MAZACC-2D software (workpiece shape compensation) - NO444 D) MAZACC-3D high-speed software package - NO445 B) Shape compensation for rotating axes - NO497 D) High-precision control for finishing - Seamless corner point control - Variable acceleration control - Ultra-high-speed machining mode - NO498 Rapid traverse paths, rounding function Absolute positioning system - All dimensions, weights and performance specifications are subject to change - - Used machine without warranty - - Subject to prior sale -

Condition: used, Year of construction: 2022, x-travel 1.650 mm y-travel 850 mm z-travel 900 mm Control Heidenhain TNC 640 spindle tunring speed 6.000 U/min power capacity 37 / 20 kW Kodpfxjykb Ipj Aaljww Torque (40/100%): 824 / 549 Nm tool taper SK 50 number of tool places 24 Pos. In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Internal coolant supply - Table cleaning system - Infrared workpiece measurement, Heidenhein TS-460 with breakage monitoring - 4th axis, Tsudakoma RWA-250L-SM - Three-jaw chuck Ø250 mm - Extraction system - 2-stage gearbox - Chip conveyor Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: used, Year of construction: 2001, x-travel 550 mm y-travel 500 mm z-travel 400 mm Control Siemens spindle tunring speed 12.000 U/min table surface area 1050 x 450 mm table load 500 kg Kjdjynnu Dopfx Aaleww In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: used, Year of construction: 2010, x-travel 508 mm y-travel 356 mm z-travel 508 mm table dimensions 508 x 324 mm spindle tunring speed 10.000 U/min Tool cone CAT 40 spindle drive 15 kW tool magazine 24 Stationen rapid traverse 25,4 m/min feed 18,03 m/min weight 6,5 t In our opinion, the machine is in good used condition and can be inspected condition and can be inspected under power by appointment. Operating hours approx. 20,851 hours Accessories, illustrated tools and clamping devices are only included in the scope of delivery if this is noted in the additional information . Kjdpfsxyafwsx Aaleww Changes and errors in the technical data and information as well as prior sale reserved. subject to prior sale

Condition: used, Year of construction: 1996, x-travel 700 mm y-travel 320 mm z-travel 270 mm turning speed range - main spindle 10 - 10.000 min/-1 drive capacity - main spindle 5 kW tool taper ISO 30 / MAS-BT table surface area 800 x 300 mm table load capacity 300 kg distance spindle /table 450 mm rapid traverse ( x / y / z ) 30 m/min Feed ( x / y / z) 5 - 10.000 mm/min number of tool places 14 Pos. tool diameter 80 mm tool length - max. 200 mm weight of tools max. 3 (gesamt 25) kg Overall size 1830 x 2950 x 2410 mm total power requirement 9 kVA The machine is defective and is being sold as a spare parts carrier. Kwsdpfxexddvbj Aalew The extraction system is NOT included in the scope of delivery. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical specifications and information, as well as subject to prior sale!

Condition: used, Year of construction: 2001, x-travel 660 mm Ksdpfxexxmmro Aaljww y-travel 460 mm z-travel 500 mm table dimensions 940 x 460 mm Control Yasnac J300 spindle tunring speed 12.000 U/min tool taper BT 40 number of tool places 30 Pos. In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: used, Year of construction: 2008, x-travel 600 mm y-travel 450 mm z-travel 300 mm spindle tunring speed 42.000 U/min In our opinion, the machine is in good used condition and can be inspected under power by appointment. Equipment: - Extraction system, Keller - Pallet system, Röders RC 2 Kwodpfx Aex Iwg Dealjw Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: used, Year of construction: 1995, x-travel 650 mm y-travel 410 mm z-travel 410 mm Control Mitsubishi Meldas 50 M max. turning speeds 6.000 min/-1 tool taper SK 40 In our opinion, the machine is in good used condition and can be inspected under power by appointment. Ksdpsx Iwg Rofx Aaleww Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: used, Year of construction: 2001, x-travel 300 mm y-travel 250 mm z-travel 251 mm Control Fanuc 16iMB max. turning speeds 15.000 min/-1 tool taper HSK-A 32 number of tool places 12 Pos. In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale! Kwjdpfxswth Sbs Aalew

Condition: used, Year of construction: 1998, x-travel 480 mm y-travel 360 mm z-travel 270 mm Kwodpfxsxddvhe Aaljw Control Brother turning speed range - main spindle 6 - 6.000 min/-1 drive capacity - main spindle 5 / 7 kW tool taper SK 30 table surface area 600 x 300 mm rapid traverse ( x / y / z ) 36 / 36 / 30 m/min number of tool places 14 Pos. The machine is defective and is being sold as a spare parts carrier. The extraction system is NOT included in the scope of delivery. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical specifications and information, as well as subject to prior sale!

Condition: used, Year of construction: 2006, x-travel 1.100 mm y-travel 600 mm z-travel 560 mm Control Heidenhain iTNC 530 spindle tunring speed 12.000 U/min tool taper SK 40 number of tool places 40 Pos. weight of the machine ca. 7,4 t In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Chip conveyor - 4th axis preparation - Internal coolant supply Kjdpfxoytybyj Aaljww Accessories, tools, and clamping devices shown are only included if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: used, Year of construction: 2019, x-travel 2.000 mm y-travel 820 mm z-travel 720 mm Control Mazatrol Smooth G spindle taper SK 40 spindle turning speed range 35 - 12.000 U/min spindle motor 22 kW distance spindle centre table top edge 140 - 860 mm table load 1700 Kg rapid travel x/y/z 50 m/min table width 820 mm table length 2500 mm table height over floor 870 mm T-slots 7 T-slot - width 18 mm T-slot - distance 100 mm tool change unit 48 tool changing time 4,7 sec wotkpiece diameter with 2 vacant positions 130 mm workpiece diameter at full load 80 mm max. tool weight 8 kg tool length - max. 350 mm air pressure - required 5 - 9 bar Air volume 260 l/min electrics - voltage/frequency 400 / 50 V/Hz coolant tank 450 l high-performance coolant system 25 bar total power requirement 46,7 kW weight of the machine ca. 14,8 t dimensions of the machine ca. 4,3 x 3,6 x 3,1 m STANDARD ACCESSORIES Transformer for the European market USB port (1 port) Mazak standard colour Spindle speed 12,000 min-1 (steep taper 40) Work area lighting SAFETY DEVICES Operator door with locking switch Work area panelling The splash guard encloses the working area from the side. Fully enclosed work area Protection against chips, coolant and access to the work area during automatic machining. Safety precautions in accordance with global standards COOLANT SUPPLY Kedpfxjtuggco Aaleww Coolant supply through spindle (pressure at the pump = 5 bar) Complete coolant system includes pumps, valves, pipework and nozzles for the efficient production of quality components. FACTORY AUTOMATION Automatic switch on/off and warm-up function Automatic switch-on of a warm-up cycle via digital timer MEASUREMENT SYSTEM Tool length measurement and tool breakage detection CHIP DISPOSAL Factory preparation for chip conveyor (left) NUMERICAL CONTROL Fixed control/operating unit Relocation Detector Mazatrol SmoothG control unit 19" LCD colour screen (touch screen) Mazak tapping/drilling cycle Tornado (Mazatrol) By drilling and tapping in helical machining mode, a wide range of diameters a wide range of diameters can be machined at high speed with a wide range of diameters can be machined at high speed with just one tool. This function minimises programming and machining times. EIA/ISO input function Tool path check in the background The tool path of a programme can be checked even if another programme number is programme number is called up and processed in automatic mode. 3D coordinate conversion Shape compensation for rotating axes Mazacc 2D software (contour correction) Accuracy is maintained at high feed rates. Mazacc-3D software package for high-speed machining High-speed and high-accuracy machining for contours defined in the finest programme contours defined in the finest programme increments. MAZACC-3D high-speed software package (NO456) is additionally required. Control with high smoothing Interface for LAN SD Memory Card I/F Smooth standard software for M/C - NO443 B) MAZACC-2D software (workpiece shape compensation) - NO444 D) MAZACC-3D high-speed software package - NO445 B) Shape compensation for rotating axes - NO497 D) High accuracy control for finishing operations - Seamless corner point control - Variable acceleration control - Ultra high speed machining mode - NO498 Rapid traverse paths Rounding function Absolute positioning system Machine incl. the f...

Condition: new, Year of construction: 2026, 0550 mm 410 mm 480 mm 650x410 mm BBT 40 10.000 U/min Ksdpox Urt Esfx Aaloww Motor Capacity 7,5/11 kW max. table load 500 kg

Condition: new, Year of construction: 2026, 1100 mm 650 mm 610 mm 1200x6000 mm BBT 40 12.000 U/min Motor Capacity 7,5/11 kW Ksdpex Urtxsfx Aaleww max. table load 1300 kg

Condition: used, Year of construction: 2007, x-travel 500 mm y-travel 420 mm z-travel 380 mm Control Heidenhain TNC 530 max. turning speeds 20-18000 min/-1 tool taper SK 30 table surface area 800 x 480 mm max. table load 500 kg number of tool places 32 Pos. max. tool length 280 mm max. tool weight 6 kg rapid traverse 50 m/min feed speeds 20 m/min weight of the machine ca. 5700 kg dimensions of the machine ca. 6,6 x 5,4 x 3 m total power requirement 45 kW Number of working hours 24.437 h spindle hours 9.874 h Number of axles 5 St. 5-axis Milling Center Deckel Maho DMG 50 eVo linear, built 2007 Attachment: 10 off SK30 tool holder Note: The control system occasionally switches to EMERGENCY STOP due to a Kedpfoytha Djx Aaloww hydraulic fault. This is probably due to the control system and not the hydraulic unit or hoses, as there are no leaks. The supplier expects that a minor repair will suffice.

Condition: used, Year of construction: 2004, x-travel 510 mm y-travel 355 mm z-travel 405 mm table surface area 786 x 355 mm control Kitamura spindle turning speed range 150 - 15.000 U/min spindle taper SK 30 table load 240 kg rapid traverse X/Y/Z axis 50/50/36 m/min ATC 20 Pos workpiece diameter at full load 70 mm tool diameter if 2 vacant positions 100 mm tool length - max. 200 mm weight of tools max. 2 kg total power requirement 15 kVA Kwodpfx Aasym D Auslow weight of the machine ca. 4 t dimensions of machine L x W x H 2,4 x 2,1x 2,63 m

Condition: used, Year of construction: 2017, x-travel 1200 mm y-travel 600 mm Kjdpoyrt Ansfx Aaleww z-travel 630 mm control Heidenhain weight of the machine ca. 7700 kg

Condition: used, Year of construction: 1999, x-travel 1200 mm y-travel 600 mm z-travel 800 mm Control Heidenhain type TNC 426 table surface area 1250x630 mm workpiece weight 1000 kg Tool changer 24 spindle taper ISO 40 turning speeds 30-8000 U/min weight of the machine ca. 7,5 t dimensions of the machine ca. 4,2x3,3x3,15 m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale Kedjyqu U Nepfx Aaleww apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1991, x-travel 5000 mm y-travel 550 mm z-travel 550 mm Control Fanuc type Series 15 M table surface area 5000x520 mm Table load 4000 kg Kwodpfoyqum Eox Aalew quill stroke 550 mm throat 580 mm distance between table/spindle 250-800 mm spindle taper ISO 40 spindle turning speed range 40-2000 U/min Tool changer 40 total power requirement 55 kW weight of the machine ca. 20 t The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, x-travel 630 mm Kwsdpfsynnuqsx Aalsw y-travel 500 mm z-travel 500 mm weight of the machine ca. 4500 kg

Condition: good (used), Year of construction: 2020, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 550 mm, CNC control Heidenhain TNC620 4th axis (NC dividing head) electronical handwheel 24-fold automatic tool changer coolant through spindle device chip conveyor exhaustion device Technische Daten / technical details: X-Weg / X-travel 1000 mm Y-Weg / Y-travel 550 mm Z-Weg / Z-travel 550 mm Spindelaufnahme / spindle taper SK40 Drehzahlbereich / spindle speed 10000 UpM /rpm Kwedpetqd E Esfx Aalsw Tischaufspannfläche / table clamping area 1000x600 mm Werkzeugwechselmagazinplätze / number of tool places in changer 24 Antriebsleistung Spindel 40%ED / drive capacity spindle 40%ED 13,5 kW Gewicht ca. / weight 6000 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: good (used), Year of construction: 2018, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 550 mm, CNC control Sinumerik 828D 24-fold automatic tool changer chip conveyor coolant through spindle device measuring feeler Kwjdowu Tpnspfx Aalew Technische Daten / technical details: Verfahrweg X / X-Travel 1020 mm Verfahrweg Y / Y-Travel 520 mm Verfahrweg Z / Z-Travel 550 mm Tischgröße / table size 1100x500 mm Drehzahlbereich / spindle speed 10000 UpM /rpm Anzahl der Werkzeugplätze / tool places in changer 24 fach Antriebsleistung Spindel / drive capacity spindle 9/22 kW Gewicht der Maschine ca. / weight 5500 Kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: good (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 610 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 610 mm, - ULTIMAX 4 control - toolchanger for 24 tools - coolant through spindle - chip screw - electronical hand wheel - measuring feeler Renishaw Technische Daten / technical details: Verfahrweg X / X-Travel 610 mm Verfahrweg Y / Y-Travel 510 mm Verfahrweg Z / Z-Travel 610 mm Tischgröße / table size 760x510 mm Werkzeugschaft / spindle taper SK40 Kedpfjx D A Ddex Aaljww Drehzahlbereich / spindle speed 10-10000 UpM /rpm Anzahl der Werkzeugplätze / tool places in ATC 24 fach Eilgang / rapid feed 30 m/min Gewicht der Maschine ca. / weight 4700 Kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: used, Year of construction: 2002, functionality: fully functional, travel distance X-axis: 850 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 630 mm, CNC control Fanuc O-M 24-fold tool changer electronical hand wheel chip tank Kwsdovfrdgspfx Aaljw Technische Daten / technical details: X-Weg / X-travel 850 mm Y-Weg / Y-travel 550 mm Z-Weg / Z-travel 630 mm Spindelaufnahme / spindle taper ISO40 Drehzahl / spindle speed 8000 UpM / rpm Tischaufspannfläche / table clamping area 1000x540 mm Werkzeugwechselmagazinplätze / number of places in tool changer 24 Gewicht ca. / weight ca. 5500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: good (used), Year of construction: 1997, functionality: fully functional, travel distance X-axis: 510 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, CNC control MSC 803 25-fold automatic tool changer coolant device Technische Daten / technical details: Verfahrweg X / X-Travel 510 mm Kwjdpfx Aewhkcxjalew Verfahrweg Y / Y-Travel 510 mm Verfahrweg Z / Z-Travel 510 mm Tischgröße / table size 750x550 mm Drehzahlbereich / spindle speed 8000 UpM /rpm Anzahl der Werkzeugplätze / tool places in changer 25 fach Spindelaufnahme / spindle taper BT40 Gewicht der Maschine ca. / weight 4500 Kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.