Condition: good (used), Year of construction: 2001, The machine will be delivered including a new replacement spindle. Digma HSC 500, year of manufacture 2001, Heidenhain iTNC 530 control, travel X/Y/Z 500/400/350 mm, spindle speed up to 42,000 rpm, tool holder HSK 40, laser diameter measurement, oil mist lubrication system, Chsdpfx Aoy A H Tpep Dod extraction for graphite machining, 3D infrared measuring probe, The tool cannot be released from the spindle; according to the service technician, this is not a spindle problem but a hydraulic issue. A new HSC replacement spindle is included.

Condition: good (used), Year of construction: 1995, functionality: fully functional, SHW UF 31, year of manufacture 1995, Heidenhain TNC 415 B control, travel X/Y/Z 1000/700/625 mm, feed rate X/Y/Z 2,000 mm/min, rapid traverse X/Y 4,000 mm/min, rapid traverse Z 2,000 mm/min, rotary table feed up to 4 rpm, main drive 20 kW, tool holder SK 50, programmable milling head, swivel time horizontal/vertical 6 sec, NC rotary table, spindle speed stepless up to 2,500 rpm, spur gearing, milling head swivels +/- 90°, quill manual 115 mm, quill motorized 100 mm, electronic handwheel, connected load 35 kW, milling spindle bearings replaced in 2025. Cjdjyx Un Tspfx Ap Djhd

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, feed length X-axis: 500 mm, feed length Y-axis: 350 mm, feed length Z-axis: 350 mm, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 350 mm, feed rate X-axis: 25 m/min, feed rate Y-axis: 25 m/min, feed rate Z-axis: 25 m/min, spindle speed (max.): 10,000 rpm, spindle speed (min.): 50 rpm, total height: 2,500 mm, total width: 5,200 mm, total length: 2,700 mm, table width: 375 mm, table length: 600 mm, table height: 120 mm, type of input current: three-phase, table load: 250 kg, overall weight: 6,000 kg, input voltage: 400 V, workpiece weight (max.): 250 kg, distance table to spindle center: 500 mm, Equipment: rotational speed infinitely variable, 1997 Heckler & Koch BA 18 – 4 Axis CNC Machining Centre – Siemens Sinumerik Machine Manufacturer: Heckler & Koch Model: BA 18 Machine Type: 4 Axis Machining Centre Year: 1997 Condition: Old but working well High-Precision German CNC Machining Centre for Sale in Ireland Used Machine Tools Ireland is pleased to offer this 1997 Heckler & Koch BA 18 4-Axis CNC Machining Centre, a robust German-built vertical milling and drilling centre renowned for accuracy, reliability, and heavy-duty construction. This machine is equipped with a Siemens Sinumerik CNC control, making it a solid choice for workshops requiring dependable CNC milling with integrated 4th-axis capability. Key Features & Highlights Csdpfx Apjyatkbj Djhd Heckler & Koch BA 18 CNC Machining Centre 4-Axis configuration Siemens Sinumerik CNC control Single spindle version Rigid German construction Automatic tool changer Ideal for precision milling & drilling Suitable for general engineering, toolmaking & production machining Technical Specifications – Heckler & Koch BA 18 (Single Spindle) General Machine type: Vertical Milling & Drilling Centre Axes: 4 Axis Control: Siemens Sinumerik Spindle type: Single spindle Tool holder: SK40 Travels (Programmable Working Area) X-Axis: 500 mm Y-Axis: 350 mm Z-Axis: 350 mm Spindle & Performance Spindle motor power: 9 kW (40% duty) Spindle speed range: Infinitely variable 50 – 10,000 rpm Torque: 50 Nm (40% duty) 35 Nm (100% duty) Power transmission: Toothed belt drive Tool System Tool magazine: Chain magazine Tool capacity: 36 tools Tool change: Automatic Average chip-to-chip time: Approx. 5 seconds Maximum tool weight: 4 kg Maximum tool diameter: 63 mm (125 mm with free auxiliary positions) Maximum tool length: 225 mm Accuracy & Feed Rates Positioning tolerance (VDI/DGQ 3441): 0.020 mm Mean position variation (X/Y): 0.008 mm Feed rates (X / Y / Z): 0 – 25 m/min Feed force per axis: 5000 N Measuring system: Rotary encoder with glass scales Table & Load Maximum table load (including table weight): 250 kg Distance table left/right: 400 mm Table to spindle nose: Max: 500 mm (620 mm without table) Min: 150 mm (270 mm without table) Electrical & Utilities Connection voltage: 3 × 380/220 V, 50 Hz Connected load: Approx. 28 kVA Pneumatic supply: Max. 8 bar Sound level at rated operation: Approx. 78 dB(A) Dimensions & Weight Machine dimensions (L × W × H): Approx. 5200 × 2700 × 2700 mm Transport dimensions: Approx. 3600 × 2000 × 2500 mm Machine weight (incl. control cabinet): Approx. 6000 kg Ideal Applications Precision CNC milling Drilling & tapping operations Toolmaking & jig work Small to medium batch production General engineering workshops Why Buy From Used Machine Tools Ireland? Trusted Irish supplier of quality used CNC machinery Machines honestly described & professionally inspected Nationwide & export delivery available Competitive pricing Notes: *Specifications are given in good faith but not guaranteed*

Condition: used, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 760 mm, table width: 2,000 mm, Sachman Model R Table size 2000 x 560 Travel: X 1600 Y 700 Z 760 Chjdpjwtfvqsfx Ap Djd

Condition: used, Mikron WF 32 CH Universal Milling Machine Machine with chip and splash guard enclosure Equipped with a Heidenhain TNC355 control system Technical Data Manufacturer: Mikron Type: WF 32 CH Control System: Heidenhain TNC355 Travel ranges: X 560 mm, Y 500 mm, Z 400 mm Clamping area: 530 x 900 mm Rapid traverse rates: X, Y 6,000 mm/min, Z 5,000 mm/min Spindle speed: 20 – 6,300 rpm Csdpowit Rhofx Ap Djhd Dimensions: 2,700 x 2,000 x 2,400 mm Weight: 2,400 kg Heidenhain TNC355 Operating Manual Heidenhain TNC355 Programming Examples Heidenhain TNC 355 Service Manual You can find more new and used items in our shop! International shipping costs available upon request!

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Tool Milling Machine Kunzmann WF4/3 with Heidenhain TNC 320 CNC Control – Excellent Condition, CE-Compliant, from Training Workshop! Technical Specifications: • Year of manufacture: 2010, Machine No. 347283 • Fixed angular table • Infinitely variable spindle speed up to 4,500 rpm • Infinitely variable feed in 3 axes from 0 to 2,000 mm/min • Rapid traverse X and Y axis: 5,000 mm/min Z axis: 4,000 mm/min • Travel X/Y/Z: 400/350/400 mm Csdpfxoxuppue Ap Dshd • Table size: 650 x 350 mm • Table load capacity: 250 kg • Vertical quill stroke: 60 mm • Vertical and horizontal quill – SK40 taper • Hydraulic clamping system • Weight approx. 1,800 kg • Space requirement approx.: 2.3 x 2 x 2 m • Drive power: 15 KVA Accessories and Equipment: • Heidenhain TNC 320 CNC control • Hydraulic clamping, vertical and horizontal • Automatic central lubrication • Spindle brake • Technical documentation, spare parts diagrams, control manuals and programming examples • Handwheels • Coolant system • Electronic handwheel HR410 About the Machine: Offered for sale is a Kunzmann WF4/3 tool milling machine with Heidenhain TNC 320 CNC control. This universal milling machine is in excellent condition and has seen very few operating hours. It comes from a facility where it was used exclusively for training purposes. The control is very user-friendly. Additionally, the machine features hydraulic clamping both vertically and horizontally. Changing from vertical to horizontal operation is very straightforward by swinging away the vertical head. The ways are regularly lubricated via the central lubrication system. The Kunzmann has been mechanically and electrically inspected by us. You are welcome to view and test the Kunzmann on-site under power. There are 7 units of Kunzmann WF4/3 with the TNC 320 Heidenhain milling machines available. The machines are available immediately.

Condition: excellent (used), functionality: fully functional, Universal Milling Machine Deckel FP3 with 3-Axis Digital Readout RSF Elektronik Z-530!! Technical Data: >> Year of manufacture: approx. 1975, Machine No. 0681 >> Swivel and tilting table (recently overhauled) >> Speed range: 40 - 2000 rpm >> Feed and rapid traverse in 3 axes >> Drive power: 3 kW >> Travel X/Y/Z: 500/300/400 mm >> Features: Vertical & horizontal spindle >> Vertical quill and horizontal quill extendable - SK-40 >> Drawbar system M16 >> Weight approx. 1300 kg Equipment and Accessories: >> 3-axis digital readout RSF Elektronik Z-530 >> Coolant system >> Central lubrication Chjdpoxu E I Hjfx Ap Ded About the machine: For sale is a Deckel FP3 universal milling machine in good condition. All spindles move smoothly. Most of the bellows are nearly new. The swivel and tilting table is as new. An oil change has been carried out. The machine has been mechanically and electrically tested. The digital readout makes work easier and more precise. Take advantage of the opportunity to inspect and test the Deckel on-site under power. The machine is immediately available!!!

Condition: excellent (used), Staircase clamp (28366) Cjdpfxsln Ulae Ap Dohd Clamping height 200 - 250 mm T-slot width 12 mm Clamping screw M 10 4 pieces available Weight 8.5 kg

Condition: ready for operation (used), functionality: fully functional, Universal milling machine WAGNER FCU-1100 is a milling machine, characterized by its robust construction and its worn green color. It is equipped with a modern digital control panel, a metallic working table with T-slots for fixing the parts and other visible mechanical components. Table dimensions: 460x1440mm Spindle nose: ISA40 RPM: 8-1200 Machine equipped with: Chjdpfxsridyro Ap Ded HURON type head lighting lubrication pump feeds on 3 axes visualization on 3-axes vise anti-vibrations

Year of construction: 1976, condition: good (used), Deckel FP1 tool milling machine, 3-axis Heidenhain digital readout, machine was overhauled by FPS years ago. Rigid table, SK 40 spindle holder vertical, SK 40 horizontal, accessories: various collets and milling arbors, counter holder, good working condition, paint is no longer so nice, can be demonstrated under power by arrangement. Chodpfxorhzcuj Ap Dod

Condition: ready for operation (used), x-travel 510 mm y-travel 450 mm z-travel 410 mm taper in main spindle MAS BT 45° (SK40) table surface area 800 x 395 mm T-slots 6 Stk. turning speeds 50 - 2500 U/min feed stepless 4-1600/4-1000 mm/min voltage 400 V total power requirement 5.0 kW weight of the machine ca. 1400 kg range L-W-H 2300 x 2300 x 1800 mm Cjdexaam Uspfx Ap Djhd from a training workshop maintained condition (!!) - in checked conditions - machinevideo - ?v=iSTVEdv2fO8 Furnishing : - robust universal milling machine - swiveling control panel, right front - rotatable universal milling head (re/li = 90°) * with hydraulic tool clamping - manual milling spindle feed, with locking - swiveling milling spindle protection - Stable T-slot clamping/angle table - Axis feeds with rapid traverse - Central lubrication unit - Control cabinet, installed on the left * Digital display - without function

Condition: used, diameter div. number 40x Cedpeww Nbxjfx Ap Djhd tool adaptor BT 40

Condition: good (used), X 800 mm Csdswa Naaspfx Ap Djhd Y 400 mm Z 500 mm

Condition: used, Year of construction: 1996, Machine: Console Milling Machine - Universal Brand: MAHO Type: MH1000 Technical Specifications: - Spindle motor: 5.5 kW - 1500 RPM - Feed motor: 3 kW - 1500 RPM - Pump motor: 0.18 kW - 3000 RPM - 70 l/min - Spindle speeds: (18) 32-1600 RPM - Spindle nose: ISA40 - Drill spindle travel; 125mm - Table dimensions against the column: 570x600mm - X travel: 1000mm - Slide travel: 750mm Cedpfxoxn Rkgj Ap Dehd - Z travel: 600mm - X feeds: 10-5000mm/min - Rapid feed: 1.4m/min - Universal table dimensions: 1250x740mm - 360-degree rotating table - Table tilts longitudinally and transversely by approximately 30 degrees - Machine weight: 5500 kg

Condition: used, Year of construction: 2001, x-travel 400 mm y-travel 250 mm z-travel 400 mm tool taper ISO 40 spindle turning speed range 30-6300 / 20-4200 U/min feeds 0 - 10.000 mm/min quill stroke 90.0 mm table-size 600 x 320 mm T-slots 5 x 14 x 63 mm Control TNC 410 CA spindle ein ~ 126 Std. engine output 11.0 kW weight 1300 kg dimensions of the machine ca. 1600 x 1500 x 1900 mm Original price incl. special accessories ~ 72.000 euros Machine was very rarely used (!!) with only approx. 126 spindle hours (spindle on) Furnishing : - MACMOM / INAS CNC universal milling and drilling machine - HEIDENHAIN CNC path control TNC 410 CA * workshop-oriented path controls, with * Programming in easy-to-understand plain text dialog * HEIDENHAIN electr. Remote control with handwheel - Pivoting control panel, to the right of the machine - hydraulic tool clamping (tie bolt DIN69872-A) - Vertical milling head rotating on both sides - ISO 40 - Vertical speed range - infinitely variable .. 30-6300 rpm. - Horizontal speed range - stepless .. 20-4200 rpm. - robust, rigid angle table with 5x T-slots - Coolant device, with tub - Swarf spray protection cabin - Instruction manual for machine Special accessories included : - 1x pneumatic clamping plate, with aggregate - 1x WALTER TANIH125 NEGI-R dividing head - 1x machine vice - HILMA RÖMHELD type SM 100 - very many tool holders - Machine swing feet * Machine video : Chjdpfsxab T Asx Ap Djd ?v=3dqLbTme81E

Condition: excellent (used), travel distance X-axis: 10,000 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 1,300 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, spindle speed (max.): 6,000 rpm, spindle speed (min.): 36 rpm, pivoting range: 360 °, SHW PowerSpeed 5 Travel Paths • X-axis (Bed): 10,000 mm • Y-axis (Vertical): 2,100 mm • Z-axis (Horizontal spindle): 1,300 mm Control System • CNC Control: Heidenhain iTNC 530 Feed Rates • X, Y, and Z axes: 2 - 30,000 mm/min • Acceleration: 3.5 m/s² Universal Milling Head in Orthogonal Design • Milling head holder swivel range: 360 x 1 degree • Milling head swivel range: 180 x 1 degree • Tool holder: SK 50 DIN 69871 • Spindle speed range: 36 – 4,000 rpm o Intermittently 36 – 6,000 rpm Automatic Tool Changer • Tool magazine for 48 tools Coolant System • Tank capacity: 500 l About the company MBM Chedpfsxgq Ayex Ap Dsd MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our main focus is on tool milling machines. Our services include supply of spare parts, on-site customer service, machine overhauls, and control system modernization. Services: - Used machines - Spare parts - Customer service - Machine service - Machine overhauls - Control system modernization ---- Used machine - used milling machine - used travelling column milling machine - orthogonal milling head - metalworking - tool milling machine - milling head - SHW machine - SHW spare parts - used milling machine - used fraesmaschine - used CNC milling machine - used bore milling machine - used metal milling machine - used metal mill - used metal milling machine - used CNC mill - CNC fraesmaschinen - CNC milling machines - milling machine - large component machining - large part machining - CNC large part machining - milling - SHW - PS5 - PS 5 - Powerspeed - SHW PSZ 5 - SHW Powerspeed - SHW Powerspeed 5 - PSZ 5 - Heidenhain - MBM milling machine - MBM machine - column milling machine

Condition: used, Model: SH75 Serial No: 7076 Capacities: Rotary Table Size: 1000 x 1000mm Maximum Table Load: 2000kg Vertical Traverse: 1000mm Cross Traverse: 1245mm Longitudinal Traverse: 1000mm Spindle Diameter: 75mm Spindle Traverse: 508mm Spindle Speeds: 5.6- 1120 rpm Spindle Taper: 40 int Facing Head Diameter: 508mm Facing Slide Traverse: 180mm Facing Head Speeds: 5.6 – 280rpm Feeds, X, Y & Z: 0.75 – 2500mm/min Cedpfx Apezrm T Ee Dehd Feeds, Spindle & Face: 0.25 – 830mm Screw Cutting to Table: 2 – 10mm Pitch, 4 – 16 TPI Motor: 7.5kw Electrics: 415v, 3ph, 50 Cycles Complete with: Screw Cutting, 3 Axis DRO, Steel Telescopic Guards, Operator Safety Guard, Pendent Control, Power Draw Bar, Safety Brake, Facing Head Lock, Spindle Support Bearing, Facing Slide Tool Holder Selection of Spindle Tool Holders, Lovo Light Approximate Dimensions: 4200 x 2940 x 2950mm Approximate Weight: 10,500kg

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, DECKEL FP 4 MK Year of manufacture: 1992, with TNC 113 active digital control with positional programming Spindle speeds: 50 - 2500 rpm Travel ranges: X 500, Y 400, Z 400 Feed rate: stepless + rapid traverse Hydraulic tool clamping system SK 40 Hydraulic machine vice Allmatic 125 Universal table Central lubrication, electric, lighting, machine feet, coolant system. Condition: original, not repainted Smooth and quiet operation at all spindle speeds Guideways and axis movements are in perfect condition. Weight approx. 1500 kg Can be inspected while powered on. Free loading D - 88433 Schemmerhofen Chodpfx Ajzxwz Tep Ded

Year of construction: 2020, condition: used, overall weight: 90,000 kg, total length: 9,500 mm, total width: 10,000 mm, total height: 7,000 mm, The BRETON MATRIX 1300 DY K30 is a 5-axis CNC gantry machining center with a movable gantry design for high-precision complete machining of large workpieces. The rigid steel construction, combined with direct measuring systems and high-dynamic axis drives, ensures high positioning accuracy and consistently stable machining quality. The machine is equipped with a HEIDENHAIN iTNC 640 HSCI CNC control system, including AFC (Adaptive Feed Control), AVD (Active Vibration Damping), and CTC (Cross Talk Compensation). These functions optimize the machining process, reduce vibrations, and improve surface quality and process reliability. The 40 kW high-speed spindle with up to 28,000 rpm features programmable internal cooling (IKZ) from 40 to 70 bar and is suitable for demanding milling operations on a wide variety of materials. The equipment includes a direct-drive NC rotary table Ø 3,500 mm with a table load capacity of up to 15,000 kg. The custom rotary table plate is equipped with 16 AMF zero-point clamping modules, enabling short setup times and flexible workpiece clamping. The machining center features an 80-tool magazine with HSK-A100 tool holder and an additional 3-tool pick-up magazine for large tools. A BLUM laser system for tool measurement and a wireless 3D probing system support automatic setup and monitoring of machining. Additional equipment includes two Barberis chip conveyors, a 2,500-liter coolant processing system with drum filter, oil separator, and coolant cooling, automatic front doors, a camera system for workspace monitoring, a wireless handwheel, and the Breton Smart Start & Stop energy-saving system. Control ON: 21,347 hours Machine ON: 13,503 hours Program runtime: 5,812 hours Spindle runtime: 5,740 hours Cjdpfx Apezknwcs Dehd Tool Changer: Yes Weight approx.: 90,000 kg Control: HEIDENHAIN iTNC 640 HSCI Travel Z-axis: 1300 - mm Travel X-axis: 4000 - mm Dimensions (LxWxH) approx.: 9500 x 10000 x 7000 mm Travel Y-axis: 4000 - mm Year of construction: 2,020 Condition: good Terms of payment: 100% prepayment before pick-up Terms of delivery: EXW EX Works under power: Yes

Condition: used, Year of construction: 2002, x-travel 600 mm y-travel 400 mm z-travel 400 mm table-size 800 x 400 mm spindle taper ISO Sk 40 spindle turning speed range 10 - 3150 U/min total power requirement 12,0 kVA weight of the machine ca. 2,2 t Chedpfxsy N D Idj Ap Ded dimensions 2,0 x 1,85 x 1,95 m CNC Universal Milling Machine - Heidenhain TNC 310 with handwheel - Hydraulic tool clamp - Central lubrication - Coolant system - Machine light - Machine feet - Enclosure

Condition: ready for operation (used), Year of construction: 2001, travel distance X-axis: 1,300 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, spindle speed (max.): 3,000 rpm, overall weight: 10,000 kg, Heidenhain TNC 426 control Table: 1400 x 700 mm Travel: 1300 x 800 x 800 mm Spindle: SA 50 Maximum spindle speed: 3000 rpm Weight: 10,000 kg Chodozbrilepfx Ap Djd

Condition: used, Year of construction: 2016, x-axis 6.800 mm y-axis 4.000 mm z-axis 1.500 mm Control iTNC 530 HSCI Heidenhain distance between columns max. 5.090 mm distance spindle center to table 1.825 mm type 175149A-0007 turning speed range - main spindle max. 19.800 min/-1 power capacity - main spindel 20 kW tool taper HSK-A63 swivellable B: +115° / -115 ° rotatable C: +/- 200 ° type 178099-0005 turning speed range - main spindle max. 10.020 min/-1 power capacity - main spindel 20 kW tool taper HSK-A100 swivellable B: +115° / -115 ° rotatable C: +/- 200 ° table surface area 6.000 x 3.000 mm max. table load 50,0 t height over floor 100 mm number of T-slots 12 T-slot - width 28H12 mm T-slot - distance 250 mm number of toolpositions 62 (38+24) pos. number of toolpositions HSK A63: 37+1 pos. number of toolpositions HSK A100: 23+1 pos. max. tool diameter HSK A63: 52 mm max. tool length HSK A63: 250 mm max. tool weight HSK A63: - kg max. tool diameter HSK A100: 80 mm max. tool length HSK A100: 450 mm max. tool weight HSK A100: - kg rapid traverse ( X / Y / Z ) 40.000 mm/min rapid traverse B/C: 4.320 °/min feed speeds X/Y/Z: 30.000 mm/min Working speed B/C: 2.160 °/min Accelaration max. 3,2 m/s² x-axis 6.800 mm y-axis 4.000 mm z-axis 1.500 mm b-axis +115° / -115 ° c-axis +/- 200 ° total power requirement 180 kVA Csdpfxszf Nn So Ap Djhd dimensions of the machine ca. 12,5 x 15,0 x 7,0 m 5-Axis-High-Speed-Gantry-Big-Machining-Center DROOP & REIN - FOGS 40 60 C - Fork head

Condition: ready for operation (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 9220212, travel distance X-axis: 3,200 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 2,000 rpm, workpiece weight (max.): 4,000 kg, TECHNICAL DETAILS X-axis travel: 3,200 mm Y-axis travel: 1,000 mm Z-axis travel: 1,000 mm B-axis rotation: 360° C-axis rotation: 360° Cedpfx Aszza U Ijp Dohd Spindle speed range: 40 – 2,000 rpm Tool holder: ISO 50 Main spindle power: 15 kW Number of axes: 3 Table length: 3,500 mm Table width: 800 mm Maximum workpiece weight: 4,000 kg MACHINE DETAILS Control system: Conventional Model: Bed milling machine with traversing table Dimensions & Weight Dimensions (L x W x H): 5,300 x 3,000 x 2,700 mm Shipping weight: 11,000 kg Number of shipping packages: 1 EQUIPMENT Digital display: Sony 3-A

Condition: reconditioned (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 8,000 mm, travel distance Y-axis: 2,600 mm, travel distance Z-axis: 1,500 mm, RepairFIT by Dornhöfer The difference. KEY TECHNICAL DATA Machine year of manufacture: 2012 Capacities / Travel: Longitudinal (X): mm 8,000 Vertical (Y): mm 2,600 Lateral (Z): mm 1,500 Table size: Length: mm 10,000 Width: mm 2,500 Distance between grooves: mm 250 Paint finish: RAL 5011 (steel blue) RAL 7035 (light gray) Tool holder: ISO 50, DIN 69871 AD Pull stud: DIN 69872 Form A Drive power: 100% ED 32 kW Spindle speed: min-1 20-4,000 Torque: Nm 900 Max. rapid traverse speed: X, Y and Z axes mm/min 25,000 Weight: kg approx. 34,200 Cedpjzz H Emefx Ap Dshd Heidenhain iTNC530 Automatic milling head, diagonal, stepless Tool changer (60 magazine slots) Chip conveyor Coolant system 20 bar & internal coolant Preparation for NC rotary table RepairFIT is our proven offering for a profitable entry into our product lines. The machines available in this line are sourced by us after a rigorous selection process and undergo a thorough inspection (deep-dive check). After intensive cleaning, the identified obvious defects and errors were professionally repaired by our expert service team.

Condition: excellent (used), Year of construction: 1985, functionality: fully functional, spindle speed (max.): 2,000 rpm, spindle speed (min.): 80 rpm, type of input current: three-phase, input voltage: 400 V, Equipment: rotational speed infinitely variable, Universal milling machine Deckel FP1 – Very good condition For sale is a Deckel FP1 universal milling machine in very good, well-maintained condition. The machine is equipped with a 3-axis digital display Heidenhain TNC 113 and stepless feed in all three axes. The Deckel FP1 is known for its precision, reliability and durability and is ideal for toolmaking, single-part production, repair work and training companies. Technical data Manufacturer: Deckel Model: FP1 Year of manufacture: 1985 Machine number: 15082 Spindle speed: 80–2,000 rpm Drive power: 1.6 / 2.0 kW Stepless feed in X, Y and Z axis Rapid traverse in all three axes Travel ranges (X/Y/Z): 300 / 160 / 340 mm Fixed angular table Vertical milling head on spindle head, adjustable by 100 mm Vertical and horizontal spindle with SK40 collet Clamping system: S20x2 Spindle brake Space requirement: 1.30 m x 1.10 m x 1.60 m (L x W x H) Machine weight: approx. 850 kg Equipment - 3-axis digital display Heidenhain TNC 113 Chodpfxszlnmme Ap Dod - Hydraulic vise - Coolant system - Operating manual The machine is in very good technical and optical condition and is ready for immediate use. An inspection and a test run can be arranged at any time by appointment.