Used High Speed Milling Machine for sale (110,240)

Condition: used, Year of construction: 2007, x-travel 550 mm y-travel 400 mm z-travel 400 mm Ibedpfx Aaexiy A Uscsc Control INGERSOLL ANDRONIC

Condition: used, Machine has a defect in the main spindle CNC vertical machining center CHIRON type FZ 22 L high speed Machining center with CNC control FANUC Series 21-M serial no. 179-98 year of construction 1999 Travel X: 2000 mm, Y: 520 mm, Z: 630 mm Table size 2700 x 570 mm Table load 525 kg (per meter) Tool holder SK 40 (DIN 69871) Drilling capacity 35 mm Tapping capacity M27 Tool diameter 75 mm Diameter with free secondary positions 105 mm Tool change speed tool - tool 2.0 sec. Tool change speed from chip to chip 4.8 sec. Distance spindle nose - table 190 to 820 mm Spindle speed max. 10,500 rpm Main spindle drive max. 18.5 kW Isdpfxsquhbgj Aacsbc Mains connection 400 Volt, 50 Hz, 32 kVA - Pendulum machining over 2 work areas (partition wall missing) - CNC control FANUC Series 21-M - Tool changer 40-fold - IKZ = internal coolant supply through the spindle - Spray protection cabin with sliding door - Indirect measuring system - Coolant device with chip conveyor opposite - Electronic handwheel Transport dimensions of the basic machine L x W x H 4600 x 2470 x 2950 mm Weight of the machine approx. 7.5 tons. Transport space requirement on the truck L x W x H 12000 x 2470 x 2950 mm Transport Weight on the truck approx. 10 ton. Weight 7.2 tons. good condition - machine has a defect on the main spindle

Condition: as good as new (ex-display), Year of construction: 2020, operating hours: 2,257 h, functionality: fully functional, machine/vehicle number: SN7682, travel distance X-axis: 730 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 400 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, feed length X-axis: 585 mm, feed length Y-axis: 250 mm, feed length Z-axis: 400 mm, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 50 m/min, nominal power (apparent): 21 kVA, controller manufacturer: Heidenhain, controller model: TNC640, total height: 3,000 mm, total length: 2,370 mm, total width: 2,845 mm, overall weight: 8,000 kg, spindle speed (max.): 42,000 rpm, operating hours of spindle: 2,256 h, number of spindles: 1, number of slots in tool magazine: 90, input voltage: 400 V, type of input current: AC, Equipment: documentation/manual, rotational speed infinitely variable, MP7-5 Axis Heidenhain TNC640 with integrated pallet changer, 40 pallet stations Travel range X/Y/Z: 730x250x400 mm B-axis travel range: +/- 105 degrees C-axis: infinite Working area X/Y/Z: 585x250x400 mm Maximum workpiece weight: 60 kg Distance machine table to spindle nose: 450 mm Machine dimensions (WxDxH): 2845x2370x3000 mm Machine weight: 8,000 kg Equipment: Cooling unit Rotary tilting table 160 (B/C axis) Workpiece measurement Renishaw OMP400 Dust extraction L-CUT 5-axis table chuck EROWA PowerChuck Pallet changer ITS50/150 pallets Tool changer with 90 positions MHT media distributor Iodpfx Asw U D Igjacjbc Control unit Heidenhain TNC640 Milling spindle Steptec HVC140 Spindle speed: 42,000 rpm HSK40

Condition: used, Year of construction: 2010, x-travel 620 mm Ibsdoxfwg Ajpfx Aacjc y-travel 570 mm z-travel 350 mm Control Heidenhain iTNC530

Condition: refurbished (used), Year of construction: 2007, operating hours: 11,200 h, machine/vehicle number: D300-373, travel distance X-axis: 550 mm, travel distance Y-axis: 340 mm, travel distance Z-axis: 350 mm, table width: 470 mm, table length: 400 mm, type of input current: three-phase, Equipment: documentation/manual, HSC300/3 (low hours) Complete overhaul of the entire system Technical data: Travel range XxYxZ 550x340x350 mm Clamping table/table to spindle nose 495 mm Overall dimensions WxDxH 2000x2350x2450 mm Rapid traverse 30 m/min Equipment: Color: light grey, partial respray in visible area CNC control Heidenhain iTNC530i electronic handwheel Direct measuring systems in all axes Milling spindle HVC140, milling power 10KW/13KW, HSK 40-E Spindle speed up to 42,000 rpm Tool diameters 0.02–16 mm Tool magazine for 40 tools HSC40-E Calibration arbor Ibsdpfxer Hb Hps Aacsc Calibration Blum laser for tool measurement Minimum quantity lubrication External cooling unit H.I.B Provision for dust extraction Dust extraction system Vario1 by Keller Transport On-site commissioning Training at our premises/on site 6 months warranty

Condition: new, functionality: fully functional, Year of construction: 2025, laser type: fiber laser, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Laser power: 3KW, 6KW, 12KW Ijdpfowz Ukyjx Aacjbc Standard hardware: waste car, fully automatic butter injection, dual-control workbench, adaptive multi-angle site placement, beam light curtain Optional hardware: fire bricks, high-pressure proportional valve (standard for 6KW and above), safety door lock, Independent laser cabinet, rear exchange table light curtain, rear lifting light barrier, Rear camera, internal camera, monitoring display, radiation-proof glass, upper cover fan, upper cover, partition dust removal

Condition: new, functionality: fully functional, power: 3 kW (4.08 HP), Year of construction: 2025, Equipment: air conditioning, cooling unit, G16 Type: Two chucks Ibsdpfx Aajwz Ufwocjc

Condition: good (used), Year of construction: 2002, Ref. -No.: 10442 Manufacturer: LIEBHERR Type: LC 122 Year of construction: 2002 Type of control: CNC Control: LIEBHERR PC NC Storage location: Halberstadt Country of origin: Germany Hob diameter max.: 90 mm Table Diameter: 145 mm Max. Module: 3 mm Smallest number of millable teeth: 4 Milling head swivel angle: +/- 45 ° Resolution accuracy: 0,1 Degree Workpiece table load: 17 kN Ibjdpfx Aoxmd Shjacsc Milling speed: 450 - 4.500 1 / min Operating voltage: 400 V control voltage: 24 V frequency: 50 Hz Max. rated current: 55 A Fuse in the supply line: 63 A Max. milling diameter spur gears/helical gears: 125 mm Max. milling width spur gears/helical gears: 250 (axial) mm Spindle stroke: 180 mm Max. cutter width: 200 mm Further information: Ambient temperature: +12°.....+40° Operating noise: 78 dB (A) Milling head designation: motor milling head Workpiece axis: vertical Stand: movable Table: fixed Milling method: axial hobbing in the same or opposite direction The machine can be inspected under power by arrangement.

Condition: new, functionality: fully functional, Year of construction: 2025, overall weight: 10,000 kg, input voltage: 380 V, input frequency: 50 Hz, feed length X-axis: 120 mm, feed length Y-axis: 200 mm, feed length Z-axis: 170 mm, GB-A1500 Fully automatic high-speed bending center Bending length (mm): 1500 Bending height (mm): 4side160 4side170/2side350 4side350 Minimum molding size: (Fold 4 sides) (mm) 4 sides 160: 350*250 4 sides 170/2 sides 350: 350*250 4 sides 350: 350*250 Ibodov Ikvgopfx Aacoc Maximum bending size (mm) 1500*1500 X-axis travel: 120 Y axis travel: 4 sides 160: 200 4 sides 170/2 sides 350 305 4 sides 350: 305 Z-axis travel: 4 sides 160: 170 4 sides 170/2 sides 350: 357 4 sides 350: 357 Pressing knife height: 4 sides 160: 177 4 sides 170/2 sides 350: 177 4 sides 350: 357 Number of axes: suction cup: 11 Pressure arm: 14 Machine power (KW) suction cup: 34.7 Pressure arm: 36.35 Maximum bending thickness of aluminum plate (mm): 3 Maximum bending thickness of iron plate (mm): 2 Maximum bending thickness of stainless steel (mm): 1.5 Maximum bending speed (s/knife) : 0.2 Overall dimensions (mm) long (front) 4 sides 160: 1890 2-4 sides 350 suction cups: 1890 2-4 sides 350 pressure arm: 1890 Width (side) 4 sides 160： 3300 2-4 sides 350 suction cups：3536 2-4 sides 350 pressure arm: 4127 4 sides 160: 2666 2-4 sides 350 suction cups: 2946 2-4 sides 350 pressure arm: 2946 Weight (approx. kg) 4 sides: 160 2-4 sides 350 suction cups: 10000 2-4 sides 350 pressure arm: 10000 1) Machine frame is heaviest welded con struction,stess released by annealing process,this has minimized deflection of the frame. 2) Y Axis full closed loop control 3) Proportional hydraulic compensation system to prevent deformation 4) German HEIDENHAIN linear encoder 5) Taiwan HIWIN ball screw and linear guide rail ,high performance AC Japanese Yaskawa AC servo motors and drives 6) Rich functions CYBELEC/DELEM professional control system 7) Electro-hydraulic servo synchronization module and Greman BOSCH pressure module 8) +/-0.01mm repeat accuracies 9) +/-0.01mm parallelism accuracies

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, Fully automatic high-performance die cutter Renz Kugler 341-2R for calendars and ring binders 3 tools Conveniently operated by a single person, Kugler punching machines are suitable for use in even the tightest spaces. Equipped with a non-stop feeder and gentle top-fed material intake. Capable of trouble-free processing of mixed materials (e.g., cardboard and plastic). Precise alignment before the punching process ensures maximum accuracy. Ideal for perforating ring binder inserts, cardboard and plastic calendar/index sheets, paper for wire-bound products, and much more. Tool changes only require a few simple steps. After punching, a turning wheel maintains the correct sequence for printed and numbered products, transporting them to the delivery station. Precise and simple register adjustment. Isdpsxduclefx Aacebc Performance features - Minimal maintenance required - Highly efficient - User-friendly operation - Fastest changeover between formats Technical data - Working width: 500 mm - Maximum punched page format: 500 mm - Maximum unpunched page format: 500 mm - Maximum punching thickness: 3 mm per layer - Punching speed: 110 cycles/min - Paper feeding: automatic, non-stop paternoster feeder - Paper delivery: automatic, box delivery with jogger - Paper grammage: min. 60 g/m², max. 2 mm (subject to gram/quality restrictions) - Register punching: yes (not included) - Interchangeable tooling - Tool changes require only a few manual operations - Quick format change, manual setting wheels - Adjustable edge distance - Punching unit can be selectively deactivated - Space required: 3.30 x 1.50 m - Net weight: 1,580 kg

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, • Max sheet size: 750 mm x 585 mm • Speed: 3600 B2 sheets/hour • 4 colour • With full service contract • XMF workflow • 13 mill prints (sheets) Ibodsxlg Txjpfx Aacec

Condition: refurbished (used), Year of construction: 1996, Bridgeport Milling Machine 2HP Variable Speed Rebuilt Machine Table has been reground on 3 Sides Excellent Condition Chrome Bed ways Ball Screw Leadscrews X & Y Axis Table Size 48” X 9” Spindle Speeds 50-4200rpm Brand New X Axis Powered Traverse Brand New 3 Axis Digital Readout ( X & Y & Quill Axis ) Iodpogvqkusfx Aacjbc Brand New Coolant Pump Brand New LED Worklight Hand Pump Lubricated Ways ( Re piped) Reground R8 Spindle Taper Coolant Tray 3 Phase 400v Fully Serviced Ready For Work Head has been fully stripped down and rebuilt new bearings , belts & Super Precision Spindle Bearings Replaced Warranty Included

Condition: used, Year of construction: 2017, x-travel 550 mm y-travel 400 mm z-travel 400 mm control Siemens Sinumerik weight of the machine ca. 9000 t Ibsdpfsxbtm Dsx Aacoc

Condition: good (used), Year of construction: 1985, spindle turning speed - stepless 26 - 1650 U/min voltage 380 V Ijdpfjvylh Usx Aacebc 0 50 Hz rated current 15 A connected load 6,5 kW tool taper MK 4 weight of the machine ca. 2,3 t dimensions of the machine ca. 1500 x 1200 x 2500 mm Operating voltage: 380 V Frequency: 50 Hz Control voltage: 220 V Rated current: 15 A Connection: 6.5 kW Automatic feed: 0.05 - 0.45 mm/rev Column lifting speed: 40 mm/s Column stroke: 450 mm Drilling spindle stroke: 200 mm Drilling zone: 430 - 1150 mm Height adjustment of the drilling spindle: 330 - 780 mm Tool holder: MK 4 Table dimensions: 1525 x 560 mm Table height: 800 mm

Condition: good (used), Year of construction: 1988, machine/vehicle number: 77796, Offer 25071 Technical data: Ibedpfxowzu A As Aacec - Electro-hydraulic raising and lowering of the saw bow - Saw blade dimensions: 400 x 45 x 2.0 mm - Cutting range - 90° round: approx. 250 mm - flat: approx. 250 x 130 mm - square: approx. 220 x 220 mm - Max. vice opening width: 405 mm - Stroke and cutting speeds adjustable - Mitre-adjustable vice - Electric motor with coolant unit - Drive: 380 V / 2.0 kW - Required space: approx. W 550 x H 1270 x D 1700 mm - Weight: approx. 380 kg

Condition: good (used), Year of construction: 1988, Fast Radial Drilling Machine Hersteller: Donau Type: DR 40 DIGI STEUERUNG: NC Steuerung Construction year 1988 EINSATZBEREICHE - BOHREN Bohrleistung Gesamtloch (Stahl): 40 mm Neck (max): 800 mm Iodpfsikvcaex Aacebc SPINDLE / PIN Spindle speed (min): 335/min Spindle speed (max): 1800/min Anzahl der Gänge: 2 Werkzeugaufnahme: MK 4 ON SPECIFICATION Table surface: 1200 x 750 mm ELEKTRISCHE VORSCHRIFTEN Mains voltage: 400 V Mains frequency: 50 Hz ABMESSUNGEN / GEWICHTE Width: 2500 mm Depth: 1250 mm Total height: 2500 mm Weight 2.6 t Drive 6kw

Condition: used, Henninger high-speed milling spindle SK40 Type 801 M391 For Deckel milling machines Ratio: 1:6 Max. speed: 12,000 rpm Continuous speed: 10,000 rpm Iedpfevygxnjx Aacsbc Temperature: approx. 60°C with tools over: ø 12 mm With 14 collets Clamping range 2 - 15 mm

Condition: new, Year of construction: 2025, NEW machine, end-of-series Pit Stop D2H HIGH SPEED double-head creasing and perforating machine, equipped with 2 standard creasing kits (for Head A and Head B) and mobile wheels. The second head, unlike the first, operates from bottom to top. All creasing and perforating tools can be installed on this second head. This allows creasing and perforating to be performed in a single pass; or, by fitting two creasing tools, it is possible to perform creases from both the top and the bottom in one pass, ensuring the correct crease orientation for zig-zag folding. High-performance creasing machine with a maximum output of up to 14,000 sheets per hour. Easy-to-use controls allow for up to 100 creases or perforations per sheet and a memory capacity of up to 200 jobs. The machine can crease, perforate, and punch, making it ideal for WIRE-O binding and calendar production. Isdpfexmhflox Aacobc This end-of-series machine can be equipped with the following optional tools: - Digital creasing kit (for both Head A and Head B) - Perforation kit 2/1-3/1-4/1 (for both Head A and Head B) - Micro-perforation kit (for both Head A and Head B) - 100 cm extension - Punching kit in various sizes Technical data: Min./max. sheet size: 8×10 cm / 50×70 cm (with optional extension 50×100 cm) Paper weight: 80 to 600 g/m² Programming: 200 programs (100 operations per program) Minimum crease distance: 0.1 mm Production speed in A4: 14,000 sheets/hour (with 1 crease) Power supply: 400 Volt three-phase + neutral, 50 Hz

Condition: new, Year of construction: 2025, Flowshrink machine for high-speed packaging of products in a special range of product sizes. Double drive longitudinal sealer system ensures firm and smooth longitudinal sealing. "Blade Position Adjusting on Power-Off" function. Servo drive system ensures precise and stable performance. Very economic alternative to side sealing systems when less flexible product sizes are used. - Specifications: packaging sizes: L(100-300)xW(30-100)xH(2-100)mm; sealing bar width: 230mm; max. speed of the machine in neutral: 100 cycles/minute; power: 220V, 3.75kW; infeed length: 3000mm; machine dimensions: L5050xW1190xH1650mm; weight: 1020kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Iedpfx Ajv Nl Iaoacobc

Condition: used, Year of construction: 2007, Mecof Prima 3 Axis High-Speed Milling Centre with Rotary Head. Serial No. 30708 (2007) with Heidenhain iTNC-530 CNC Control, Travel X/Y/Z = 1650/1900/850mm, Table Size 1800 x 1500mm, 40 Tool ATC, Max Spindle Speed 30,000rpm, Spindle Taper HSK 62E, Feed Rate Max 100,000mm/min, Spindle Power 22kw, Renishaw Tool Setting. CE Mark Isdpfsxnm Ibjx Aacjbc Please Note: Dismantling and Loading will be carried out by our own supplier. A charge of €11,500 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item.

Condition: excellent (used), Year of construction: 1987, TOYOSK 0-PTMS fixed spindle pitch high speed 12-spindle tapping machine Year of manufacture: 1987 Speed ​​(3 stages): 850 / 1200 / 1700 rpm Speed ​​change: Mechanical (stepped stages) Spindles: 12pcs For precision mechanics, small holes / threads. Iodpjwifd Hofx Aacebc Application: Simultaneous preparation of multiple holes in precise, mass production tasks (e.g. automotive parts, sheet metal, castings)

Condition: new, Technical data: Drilling capacity in steel: 50 mm Ibjdepxmlqepfx Aacjc Tapping capacity: M33 face milling cutter: 100 mm end mill: 25 mm spindle: MK 4 throat depth: 340 mm Speeds: (6) 50 - 1510 1/min quill stroke: 200 mm quill feed: 0,1 / 0,2 / 0,3 / 0,4 mm/rev table size: 820 x 240 mm traverse path X: 460 mm traverse path Y: 280 mm column diameter: 180 mm Number of T-slots: 4 T-slot size: 16 x 26 mm motor power: 3 kW Weight, approx.: 750 kg Equipment: - Cross table - thread tightening spindle - Thread cutting device - Automatic spindle feed - LED machine light - Rotatable table - Manual fine feed - Coolant device - Height adjustable protective cover - Limit switch protected spindle

Condition: used, Year of construction: 2007, Mecof Air One 3 Axis 165 High-Speed Milling Centre With Rotary Head. Serial No. 40719 (2007) with Fidia C10 CNC Control, Travel X/Y/Z = 1650/2300/1000mm, Table Size 2500 x 1750mm, 40 Tool ATC, Max Spindle Speed 30,000rpm, Spindle Taper HSK 63E, 40 Tool ATC, Feed Rate Max 60,000mm/min, Spindle Power 22kw, Blum Tool Setting. CE Mark Ibedpfexnm Hwox Aacec Please Note: Dismantling and Loading will be carried out by our own supplier. A charge of €11,500 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item.

Condition: like new (used), functionality: fully functional, spindle speed (min.): 4,500 rpm, table width: 280 mm, table length: 1,100 mm, rotational speed (max.): 4,500 rpm, table load: 350 kg, overall weight: 2,100 kg, input voltage: 200 V, workpiece weight (max.): 350 kg, input current: 200 A, input frequency: 50 Hz, Equipment: documentation/manual, rotational speed infinitely variable, SHIZUOKA VHR vertical milling machine for sale in new condition manufacturer: SHIZUOKA MACINE TOOL co.LTD. type: VHR SD Spindle taper ISO 40. 3 axis feed 3 axis with digital scale Axis travel longitudinal 820 mm, transverse 300 mm, vertical 450 mm. table dimensions 1100x 280 mm (3 'T' slots). Maximum table load 350 kg. . Spindle speed range: low 75-480 rpm, high 550-4500 rpm. p length: 1600mm machine width: 1755mm Iedpfswqgr Uex Aacsbc machine height: 2190mm machine weight: 2100kg If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: used, Henninger high-speed milling spindle SK 40 Type 801 H580 Ratio: 1:6 Max. speed: 12,000 rpm Ibodpfx Aaevygzijcec Continuous speed: 10,000 rpm Temperature: approx. +60°C with tools over: ø 12 mm without collets