Condition: used, Year of construction: 1997, Year: 1997 Table: 1780 x 415mm Iaedpfx Aowtd Dysalop Spindle Speed 30 – 2066 RPM FIDIA Control Power Draw Bar LOVO Light Coolant

Condition: refurbished (used), Table Size: 1635mm x 460 mm X Long Axis: 1300 mm Y Cross Axis: 700 mm Z Vertical Axis: 500mm Spindle Taper: 40 ISO Iaodpfx Aaewh N Uyjljp Spindle Speeds: 30-2066rpm Feed Range: 1.6 to 820mm/min Rapid Feed Rates X/Y/Z: 2800mm/min Max. distance between milling head and table 649 mm Machine Weight 3200 kg Machine Dimensions L x 2361mm D x 2500mm H x 1648mm Main Motor 8.7 kW Machine Light Universal Head Coolant Condition: Fully Refurbished (reground, hand scraped and re-aligned) New Screws & Nuts on X, Y and Z

Condition: excellent (used), Year of construction: 2011, New 2011 Axis X 785 mm Iajdpfx Ajtt Ivbsalep Axis Y 470 mm Axis Z 530 mm CNC PROTOTRAK PMX Table length 900 mm Table width 500 mm Max. part weight 460 kg Number of tool pockets 16 Spindle taper BT40 Max. spindle speed 8000 rpm Spindle motor power 11 kW ----- Length x width x height 2870.0 × 2246.0 × 2743.0 Weight 3410 kg

Condition: used, Year of construction: 2011, Technical details: x-travel: 8500 mm y-travel: 2000 mm z-travel: 1500 mm rapid travel x/y/z: 25 m/min table-size: 10.000 x 1.350 mm table load: max. 5 t/qm universal head: orthogonal 1° x 1° tool taper: SK 50 milling head speed: 4.000 1/min power capacity: 37 kW max. torque on the spindle: 900 Nm internal coolant system feed: 15 bar control: HEIDENHAIN iTNC 530 Tool changer: 60 Pos. total power requirement: 75 KW dimensions of the machine ca.: 12,7 x 5,2 x 4,6 m weight of the machine ca.: 35 t universal travelling column - universal machining center, orthogonal milling head, water-cooled, with 1° indexing in 2 axis (360 pos. in rear layer, 270 pos. in front layer) 3D touch probe M&H 20.41, dividing wall for 2 table machining, internal air blast, 15bar high pressure pump, prepared for HSC milling heads incl. torque support, Iodeytrw Topfx Aaljap moveable operator-cabin/panel, chipconveyor, handwheel HR 410, controlled security fence, miscellaneous accessories (angle milling heads, vices...) on request approx. 39.000h "machine on", approx. 16.000h "spindle on" still under power in closed factory *

Year of construction: 2015, condition: used, Empty weight: 3.600 kg Dimensions (LxBxH): 210 x 210 x 220 cm Price: On request - Year: 2015 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 5752 - Drive system: CNC - Horizontal/vertical: Horizontal and vertical - Control system brand: Heidenhain - Power [kW]: 12.0 - Number of axes [pcs]: 3 - X-axis travel [mm]: 1250 - Y-axis travel [mm]: 540 - Z-axis travel [mm]: 520 - Table length [mm]: 1800 Isdpeymfwyofx Aalsap - Table width [mm]: 400 - Tool holder: BT50 - Main spindle power [kW]: 7.5 - Min. spindle speed [rpm]: 275 - Max. spindle speed [rpm]: 2000 - Tools included: Yes - Transport dimensions: 2100mm x 2100mm x 2200mm (l x w x h) - Transport weight [kg]: 3600kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, total height: 1,700 mm, total width: 1,600 mm, total length: 1,800 mm, Empty weight: 1.650 kg - Documentation available: Yes - CE certificate present: No - Drive system: Conventional - Horizontal/vertical: Horizontal - Power [kW]: 4.0 - Number of axes [pcs]: 3 - X-axis travel [mm]: 700 - Y-axis travel [mm]: 550 - Z-axis travel [mm]: 430 - Table length [mm]: 1100 - Table width [mm]: 255 - Tool holder: ISO30 - Min. spindle speed [rpm]: 38 - Max. spindle speed [rpm]: 1500 - Options: Digital readout - └ Type of digital readout: Sony Iaedpfx Aajymfn Eolep - Transport dimensions: 1800mm x 1600mm x 1700mm (l x w x h) - Transport weight [kg]: 1650kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Year of construction: 2016, condition: ready for operation (used), travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,200 mm, spindle speed (max.): 5,000 rpm, number of axes: 3, This 3s JOBS THORA RT Bed Type Milling Machine manufactured in 2016 features a robust table measuring 1,200 mm by 1,200 mm, accommodating workpieces up to 5,000 kg. With a spindle speed of 5,000 rpm and a tool magazine capacity of 40 tools, it offers efficient milling capabilities. Consider the opportunity to buy this JOBS THORA RT Bed Type Milling Machine. Contact us for further details. • Table • Length: 1,200 mm • Width: 1,200 mm • Surface: Tapped holes • Maximum workpiece dimensions (L × W × H): 1,600 × 1,600 × 950 mm • Workpiece capacity • Maximum workpiece weight: 5,000 kg • Spindle • Torque (continuous/10 min): 637 Nm Iedpfoyla S Njx Aaljap • Tooling • Tool magazine capacity: 40 tools Technical Specification Taper Size ISO 50

Condition: ready for operation (used), Year of construction: 2000, spindle speed (max.): 25,000 rpm, controller model: 2000, number of axes: 3, This 3-axis MIKROMAT 8V gantry milling machine was manufactured in 2000. It features an Andronic 2000 control system, automatic tool change with a 16-position ATC, and a high-speed spindle capable of up to 30,000 rpm in short bursts. Equipped with a BLUM laser system for precise tool monitoring and measurement, and a scraper belt conveyor by Knoll for efficient chip removal. Consider the opportunity to buy this MIKROMAT 8V gantry milling machine. Contact us for more information about this machine. Additional equipment • Scraper belt conveyor with discharge height 1200 mm • Temperature stabilization switch cabinet with high-performance cooling unit Machine Benefits Technical Machine Benefits • Automatic tool change type: atc-16p • Hsk 100 spindle mount • Blum laser system for tool monitoring and measurement Iajdox D Dymopfx Aalop • Andronic 2000 control system • High-speed spindle with a maximum speed of 25000 rpm Extra Information Logging of measurement results via print screen Andronic 2000 control system with automatic tool change type: ATC-16P with work area protection With: 1 piece High-speed spindle Complete with torque support For automatic tool change Speed Dry running nmax Continuous operation 25,000 rpm At 10% duty cycle 30,000 rpm Reference time 1 hour Transmission ratio 1:7.5 Machine spindle mount DIN 69 893 HSK 100 1 piece Scraper belt conveyor for short-chip materials Discharge height 1,200 mm Make: Knoll 1 Logging of measurement results via print screen 1 piece BLUM laser system Tool monitoring and measurement 1 Temperature stabilization Switch cabinet with high-performance cooling unit The rotary table visible in the picture (working spindle) has been decommissioned and is not available as a rotary table.

Year of construction: 1991, condition: ready for operation (used), controller manufacturer: HEIDENHAIN, controller model: TNC 415, This 3-axis Huron X 61 38 bed type milling machine was manufactured in 1991. It is equipped with a Heidenheim TNC 415 control system and offers substantial travel dimensions with an X-axis of 2400 mm, Y-axis of 1000 mm, and Z-axis of 1000 mm. The machine's transport dimensions are 3000 mm in breadth, 1400 mm in thickness, and 3000 mm in height. Consider the opportunity to buy this Huron X 61 38 machine we have for sale. Reach out for more information. Iedpfjx D Humox Aaleap

Year of construction: 1995, condition: ready for operation (used), number of axes: 3, This 3-axis Parpas MT100 was manufactured in 1995, featuring a large working envelope of 3500x2000x1000 mm and equipped with 2 cast iron teams. Ideal for complex milling tasks, consider the opportunity to buy this Parpas MT100 Bed Type Milling Machine. Contact us for more information. • Dimensions/Travel/Capacity: 3500 x 2000 x 1000 (units not specified) • Note: Listing mentions “2 cast iron teams” (verbatim). Please confirm the correct term (e.g., beams/tables) for accuracy. Iaedsyca Ixspfx Aalep

Condition: ready for operation (used), Year of construction: 1997, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 700 mm, spindle speed (max.): 10,000 rpm, table load: 4,000 kg, overall weight: 13,000 kg, controller manufacturer: SIEMENS, controller model: 840D, number of axes: 3, This 3-axis Nicolas Correa Euro 2000 was manufactured in 1997. It features a Siemens 840 D control system and a Ganfior electro-spindle capable of reaching 10,000 rpm. The working envelope is 2000 × 1250 × 700 mm with a spindle taper of SK40. It supports a maximum table load of 4,000 kg and weighs 13,000 kg. If you are looking to get high quality milling capabilities consider the Nicolas Correa Euro 2000 machine we have for tact us for more information. • Spindle: Ganfior electro-spindle Technical Specification Iasdpfx Aaoyctpijljp Taper Size SK 40

Year of construction: 1990, condition: ready for operation (used), travel distance X-axis: 4,300 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 17,000 mm, controller manufacturer: HEIDENHAIN, controller model: T355A, spindle motor power: 14,700 W, spindle speed (max.): 1,207 rpm, table length: 6,000 mm, table width: 1,060 mm, number of axes: 3, This 3s MECOF CS 88 G Bed Type Milling Machine was manufactured in 1990. It features a working table length of 6,000 mm and a maximum permissible load of 8 tons per meter. The spindle motor power is 14.7 kW, with a speed range of 10 – 1,207 rpm. If you are looking to get high-quality milling capabilities, consider the MECOF CS 88 G machine we have for sale. Contact us for further details. • Working table • T-slots: 6 on table + 2 lateral • T-slot width: 22 mm • Distance between T-slots: 175 mm • Max permissible load: 8 tons per meter • Axis travels • X (longitudinal column): 4,300 mm (variants: 2,300 / 3,300 / 4,300 mm) • Y (ram cross): 1,000 mm • Z (vertical head): 1,700 mm (variants: 1,200 / 1,700 mm) • Spindle • Constant torque range: 10–249 rpm • Spindle diameter (front bearing): 90 mm • Feeds Iasdpfx Aasyi A Eysljp • Micrometric feed rates: up to 4,100 mm/min • Working feed rate: up to 4,200 mm/min • Rapid traverse: up to 4,600 mm/min • Drives & motors • Spindle motor: Thyssen, DC • Axis feed motors: Servomac • Lubrication and hydraulic pumps: Sever / Willi Vogel • Cooling system: dedicated headstock oil cooling • CNC control • Heidenhain T355A • Control unit: BE 412 B Technical Specification Taper Size ISO 50

Condition: ready for operation (used), Year of construction: 2023, travel distance X-axis: 900 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 200 mm, spindle speed (max.): 24,000 rpm, overall weight: 545 kg, spindle motor power: 4,000 W, number of axes: 3, This 3-axis T-Rex Servo-0609 was manufactured in 2023. It features a CNC portal milling machine with a KinetiC-NC control system and PC software. The travel dimensions are 900 mm (X) × 600 mm (Y) × 200 mm (Z). It includes a Hiteco 4.0 kW ATC spindle, air-cooled, with a 24,000 rpm and an automatic 4-fold tool changing station. Consider the opportunity to buy this T-Rex Servo-0609 gantry milling machine. Contact us for more information about this machine. Additional equipment • Accessories: Electronic handwheel, Gigabit network switch (5 ports) Machine Benefits Technical Machine Benefits Ijdpfx Asx H A Nnealeap • Drive: servomotors with automatic lubrication • Clamping system: vacuum plate with t-slot rails • Tool change: 4-fold changing station (iso30), automatic (atc) • Tool holder: 6× sk30/er32 with nuts and tightening bolts • Single collet er32 (3. 175 mm, 0. 0006” concentricity) • Vacuum generation: side channel blower 2. 2 kw (520 mbar, 155 m³/h) • Transportation: box dimensions: 175 × 180 × 200 cm Extra Information Machine still under power

Year of construction: 1998, condition: ready for operation (used), travel distance X-axis: 2,500 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, overall weight: 9,500 kg, total height: 2,760 mm, spindle motor power: 29,000 W, product length (max.): 6,600 mm, spindle speed (max.): 4,000 rpm, table load: 4,000 kg, number of axes: 3, This 3-axis Nicolas Correa CF-22 Bed Type Milling Machine was manufactured in 1998. It features a universal manual U22 head with dual orientation, hydraulic tool clamping, and an ISO 50 tool taper. The table dimensions are 2,500 × 700 mm, supporting a maximum load of 4,000 kg. Spindle speeds range up to 4,000 rpm, powered by a 29 kW motor. Reach out for further details regarding this machine. • Table dimensions: 2,500 × 700 mm • T-slots: 5 • T-slot width: 22 mm • Head type: Universal manual U22 (dual orientation) • Indexing: Manual in 2 planes • Tool clamping: Hydraulic • Feed rates: • Working feed (X/Y/Z): 5 – 5,000 mm/min • Rapid traverse (X/Y/Z): 12,000 mm/min Iasdpsx D D Nzofx Aalsp Technical Specification Taper Size ISO 50

Year of construction: 2006, condition: ready for operation (used), travel distance X-axis: 3,000 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 1,500 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, overall weight: 17,000 kg, total height: 3,395 mm, spindle motor power: 22,000 W, spindle speed (max.): 3,000 rpm, table load: 6,000 kg, number of axes: 4, This 4-axis GORATU G Master 31 was manufactured in 2006. It features a large table of 3000 x 900 mm, capable of handling a maximum weight of 6000 Kg. The machine offers extensive travel with 3000 mm on the X-axis, 900 mm on the Y-axis, and 1500 mm on the Z-axis. It includes a 24-slot tool changer and a powerful main motor of 22/27 kW. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits Iajdpfx Aoyar I Sjalep • Table dimensions: 3000 x 900 mm • T-slots: 5 x 22 x 160 mm • Feed speed: 20000 mm/min • Tool changer: 24 Extra Information Machine still under power Dimensions Machine Depth 8100 mm

Year of construction: 2004, condition: ready for operation (used), overall weight: 450 kg, number of axes: 3, This 3-axis VHF CAM 20230 Bed Type Milling Machine was manufactured in 2004. It features a substantial weight of 450kg, ensuring stability and robust performance for precision milling. Consider the opportunity to buy this VHF CAM 20230 Bed Type Milling Machine. Contact us for more information. Iaodpjyf Nlfjfx Aalop

Condition: ready for operation (used), Year of construction: 1998, total height: 4,900 mm, overall weight: 51,000 kg, controller manufacturer: SIEMENS, controller model: SINUMERIK 840D, This 4-axis MIKROMAT 20V gantry milling machine was manufactured in 1998. Ideal for precision milling, it offers robust construction and reliable performance. Consider the opportunity to buy this MIKROMAT 20V gantry milling machine. Contact us for more information. Additional equipment • Automatic Tool Changer: Included / Number of Places in the Magazine: 90 / Max. Tool Diameter: 125 mm (300 mm with free secondary positions) / Max. Tool Length: 450 mm/ Max. Tool Weight: 30 kg /Tool Change Time: Approx. 5 sec • Compressed Air Connection / Air Volume: 6 bar - 5 m³/h / Nominal Voltage: 3 AC 400 V / Control Voltage: DC 24 V / Connected Load: Basic machine 65 kW • Cooling Lubricant Supply and Filter System: Included / Tank Capacity: 1500 l / Pump for External Cooling: Q= 20/40/60 l/min switchable / Pump for Internal Cooling: Q= 35 l/min at 50 bar Work Area Guard with Lighting: Included / Set of Chip Conveyors: Included, with scraper belt type, discharge height 1000 mm Machine Benefits Technical Machine Benefits Iajdox D Hcwopfx Aalsp • Traverse path: x (table): 5200 mm/ y (slide): 3400 mm /z (spindle): 1250 mm • Traverse path: x (table): 5200 mm y (slide): 3400 mm /z (spindle): 1250 mm • Max. Feed force (x, y, z): 15 kn • Clamping surface: 2000 x 5000 mm / max. Table load: 100 kn / width / spacing of table grooves: 22 / 160 mm / passage width: 2400 mm / distance between spindle nose and table surface: 500 to 1750 mm • Spindle speeds: 10 to 5000 rpm / max. Power of the spindle motor: 37/46 kw / max. Spindle torque: 1000/1250 nm / spindle head for tool shank: sk 50 • Control type: microprocessor control siemens sinumerik 840d / screen: colour screen 10. 4 inch tft display / number of axes: 3 (x, y, z) • Control system: integrated with various functionalities including spindle orientation, interpolation, and an electronic handwheel • Programming and data transfer: includes comprehensive programming capabilities and data transfer options via the universal interface v24/rs-232 • Accessories: multiple accessories and additional device functionalities included, focusing on enhanced efficiency and safety Dimensions Machine Depth 10500 mm

Year of construction: 1989, condition: ready for operation (used), number of axes: 3, This 3-axis Parpas SL100 Bed Type Milling Machine was manufactured in 1989. It features a large working envelope of 2500x1500x1000 mm and is equipped with 2 steel teams. Consider the opportunity to buy this Parpas SL100 Bed Type Milling Machine. Contact us for more information. Isdpfx Aajyca Irelsap • Dimensions/Travel/Capacity: 3500 x 2000 x 1000 (units not specified) • Note: Listing mentions “2 cast iron teams” (verbatim). Please confirm the correct term (e.g., beams/tables) for accuracy.

Year of construction: 1990, condition: ready for operation (used), controller manufacturer: HEIDENHAIN, controller model: TNC 415, number of axes: 3, This 3-axis Nicolas Correa A-16 was manufactured in 1990. It features a CNC-controlled X, Y, and Z axis, a horizontal spindle, and a fixed table suitable for heavy-duty milling operations. The rigid cast-iron structure is designed for high stability. Although the CNC control has a fault, the machine is in good mechanical condition with a complete overhaul of the headstock motor carried out in 2024. Contact us for more information about this machine. • Operation mode: Manual/automatic operation (depending on configuration) • Spindle: Horizontal spindle • Table: Fixed table; suitable for heavy-duty milling operations • Construction: Rigid cast-iron structure; designed for high stability and accuracy • Condition: • Machine is in good mechanical condition • Headstock motor completely overhauled in 2024 • Paintwork in good condition (including push-button panel and general appearance) • CNC / Control: • CNC control has a fault • Control model: Heidenhain TNC 415 (no longer supported by manufacturer) • Control unit and monitor are currently dismounted • Machine requires a control retrofit / control replacement to be operational Additional equipment Isdpfjyctg Ujx Aaljap • No additional equipment mentioned (e.g., robots, automation, chip conveyor, bar feeder).

Condition: ready for operation (used), Year of construction: 2007, operating hours: 17,000 h, spindle speed (max.): 4,000 rpm, controller manufacturer: HEIDENHAIN, controller model: 530, number of axes: 3, This 3-axis KIHEUNG KNC-U1000 was manufactured in 2007. It features a spindle speed of 4000 rpm and an ISO50 taper. The machine is equipped with a 40-tool automatic tool changer and coolant through the spindle for enhanced efficiency. If you are looking to get high-quality machining capabilities, consider the KIHEUNG KNC-U1000 ed type milling machine we have for sale. Contact us for further details. • 2.5° head • Coolant through spindle • 40 tools in ATC Iodpfeymmxfex Aaljap Technical Specification Taper Size ISO 50

Condition: good (used), Year of construction: 1996, x-travel: 380 mm Iaedpsua E Naofx Aalep y-travel: 140 mm quill stroke: 40 mm table-size: 630 x 150 mm spindle taper MT: 2 voltage: 380/400 V

Condition: used, Year of construction: 2016, Milling machines Travel distance X: 760 mm Travel distance Y :430 mm Travel distance Z: 460 mm Number of axis: 3 milling machine / machining center Control: Siemens Sinumerik 828D CNC spindle chuck: SK40 spindle revolutions: 10000 rpm Iaodpoyqxy Asfx Aalep Speed range from: 10 U/min Speed range to: 10000 U/min table size X: 900 mm table size Y: 410 mm max. workpiece weight: 350 kg tool changer: 24 - time input Power : 12 kW feed rate: 10000 mm/min control Siemens Through-spindle coolant: 30 bar Renishaw Touch Probe

Condition: used, Year of manufacture: 1980s Technical data: Travel X/Y/Z: 400 / 400 / 400 mm Tool holder: SK 40 Isdpfx Aeyfrf Isaljap Speed range: 40 - 4000 rpm Feed, stepless adjustable: 2 - 360 mm/min Rapid traverse: 4000 mm/min Swivel table: 700 x 460 mm, max. load 350 kg Tool changer: Number of tools: 20 Max. tool diameter: 80 mm Max. tool length: 300 mm Max. tool weight: 6 kg Equipment: - Control: CNC path control Deckel Dialog 11 - Hydromechanical clamping system SK 40 with drawbar according to DIN 69872 - Vertical and horizontal working spindle - Milling head manually swivels +/- 90° - Geometrically stepped direct drive for maximum torque - Milling performance at the working spindle

Condition: used, Huron MU6 Milling Machine, serial number 14615, New Jan 1977, 40 INT Head, with tooling, table 2000mm x 460mm , note - no end covers. Iaodex Rky Aopfx Aalsp

Condition: excellent (used), Year of construction: 2011, DRLTS 3000 x 2500 Table dimensions (L x W): 3,000 x 2,500 mm Overall dimensions (L x W x H): 6,374 x 2,500 x 1,200 mm Payload: 60,000 kg Motor speed linear unit: 2,500 rpm Power consumption: 35 kW Year of manufacture: 2011 Iajdpfxjyqwxdj Aalop Weight: 26,000 kg