Quotation for second-hand machine
Illig form-, filling- and sealing machine FS 31, machine number: 186, WE 971
Basic machine with the following additional equipment:
- NC equipment Siemens S7, with OP 17 operator panel
- 2-up roll stand for container material including cutting and
splicing device
- automatic joint identification of container material
- separately moved 1 zone contact heater
Dbdb9zgz
- male vacuum forming device
- plug assist with pneumatic drive reinforced
- multi-gripper...
Thermoforming machine (2.700 x 2.300 mm)
Bbdiqniir0
SMA-REF-6193
Type: thermoforming machines
Manufacturer: Cannon Shelley
Model: PF 2621
Year: 1999
Working range:
2.700 x 2.300 mm
Stroke: 1.000 mm
Condition:
ready for action
unser power
Location: Western Germany
Availability: on demand
The machine was in operation until the last. At present the machine is dismantled and ready for transport.
Machine is especially suitable for serial production of roll material.
Lal7moyl
Deep drawing area: 800mm x 700mm
Maximum tool height: 190mm
Machine has lower and upper heating (ceramic heating element)
Machine is equipped with PLC control which means that machine runs fully automatically.
Machine can also be used for single pieces with manual operation.
To the machine belong various spare p...
Make: MARBACH, Year of construction: 12/97, Serial-No.: 065.970.1110, consisting of: 36 cavities, Ø 68 mm, 4-row, for PP, without mould insert
B02a2dahqn
Quotation for second-hand machine
Illig vacuum forming machine RV 53, # 250, 1988
Basic machine with following additional equipment:
- material roll stand for 1200 mm diameter
- lower heater with cross-row control incl. material sag control
- heating for steel rule die
- stacking station with counting and push-out device
Bt2lcbnfk3
Year of construction: 1988
Condition: ready for operation
Price: on request, ex works, subject to prior sale
Vacuum Form machine for the production of plastic Blister packaging
PS, PVC, PET etc.
- Un-winder
- Top heating plate
- waste windier
- With moveable bottom table
- With a stacking unit.
Forming area (mm): 500 x 350
Film width (mm): 540
Bvuhzs3lyi
Depth (mm): 100
max. plate size: 2000x1000 mm
max. mold height: 610 mm
voltage: 400 V 50 Hz
total motor power: 2,92 kW
Bwk7bihfzy
total heating power: 63,3 kW
max. permissible air pressure: 10 bar
Bottom heater was renewed at the end of 2017 after damage.
Various clamping frames available.
The machine can be inspected at any time.
All information without guarantee.
Used machine sale without warranty.
Make: MARBACH, Year of construction: 03/94, Serial-No.: 065.940.0110, consisting of: 32 cavities, Ø 75 mm, 4 rows, for PP, without mould insert
Eizo2nguk
Illig vacuum forming machine, type UA 150/4 g P,
basic machine with following additional equipment:
- plug assist with remote control, digital setting of speed and automatic clamping of plug;
- one additional socket for temperature control units or chiller, main switch reinforced;
B7eita8vqx
- 8-up reinforced cooling blowers;
- 8-up spray nozzle equipment;
- colour screen VDU operating panel;
- including 6-position switching for upper heater and 4-position switching for lower heater, storage ...
> Top heating with small single radiator via toggle switch
Bk89vdm2sl
> Underheater large radiator
> Upper stamping unit
> Protective grille pneumatically lockable
> 4 cooling fans D05 with spray nozzles
> Automatic preblow and demoulding
Illig vacuum forming machine of the type UA 200/4 g P,
basic machine with following additional equipment:
- 2-cylinder plug assist with 4 synchronized racks, remote
adjustment and digital setting of speed, automatic tool clamping
via 4 locking devices
- 3 vacuum pumps, each 100 m³/h
- material sag control with light barrier above lower heater
- 8-up reinforced cooling fan = 8 x 22 cbm/min
- 8-up spray nozzle device
- central lubrication with hand pump for forming machine
- elect...
> Small moulding machine with the format 350x250x90.
> For skinning and blistering of small batches.
> As a sample machine for every company.
Hdmmc3b9
> Optionally also with upper punch.
> Further details on request.
> Completely overhauled and newly painted
Quotation for second-hand machine VM 054
Illig plate forming machine UA 225/4 g P, #319
Illig plate forming machine type UA 225/4 g P, basic machine with the following additional equipment:
- Siemens S 7 control system with Siemens OP 37 operating panel
- operating parameters can be stored
- operator guidance with automatic process data calculation including heater layout, including all times, speeds and temperatures
- pneumatic actuation for protective grid
- temperature control connection fo...
> Skin machine and blister machine with longitudinal and cross cutter, Euro perforation.
> Completely overhauled and newly painted SB 74c-10 with steel strip punch and residual material take-up. New conveyor belt.
> Size 770 x 505mm.
> On request also as c-9 or with upper punch.
Bk7shlfib7
Second-hand quotation VM 037
Illig automatic high-speed pressure former RDM 37/10
Machine with following equipment:
B9gzzdmyjd
- upper heater: longitudinal row control with separate control cabinet
- lower heater: with full area control and material sag control
- material roll stand with wind-up device and pneumatically operated reel brake
- central lubrication with hand pump
- temperature control for upper and lower tool (Buschjost)
- cam control with rimless punching device
- material transp...
> Roller bracket
> Control system Siemens S7
Obgrl
> Top heating
> Max. forming area 775 x 505 mm
> Max. moulded part height 150 mm
> Longitudinal and cross cutters
> completely overhauled and newly painted
Quotation for second-hand machine VM055
Illig air pressure forming machine RDM 75 K, #168 with hole punch and stacking unit PLS 75 b, #R11514 and skeletal web granulator RS 75 b, year 2000
- Illig air pressure forming machine RDM 75 K, basic machine with the following essential features:
- material transport with servo drive
- material transport with hardened support bars, central width adjustment and cooling bars for temperature control
- pneumatically operated, automatic spreading device for ...
> Blister machine HSA 50 C RD 50 C incl. cooling unit, tool and pallet set
Fvahdkwl
> all defective parts replaced and repainted
> tested and fully functional
> Top heating with pilot radiator control
> Single radiators of the top heating
> 2 cooling fans D05
> Automatic preblow and demoulding
> Documentation and plans in German
> Max. forming area 1210 x 500
> Longitudinal and cross cutter with 6 quick-change squeezing knives
Bk7q7kpozq
> Euro hole punching device (can be retrofitted at extra charge)
> completely overhauled
> 2-column stations (electromechanical)
> PP/PVC/PET/PE All materials can be processed
> automatic foil unwinding
Bk7qrwrtmj
> Film suspension for bottom films
> Film transport for multiple gripper and electromechanical drive
> Film gripper bar in the heating and forming area
> Filling section in bridge design
> Filling line extension to approx. 3.000mm
> Package and position control in the punching area
> Package conveyor belt 1.500mm
> Waste cross cutter with waste chute
> SPS control Schleich...
> Cut-off saw TS 100 c, with conveyor belt, suction belt, extraction, adjustable treadmill and saw blade.
Mvbm9o
> 4 hold-down devices, new wheels and new bearings.
> Machine completely overhauled and new painted.
> Passage width of 600mm
> Further details on request.
ILLIG Universal Thermoformer UA 250 1G with BE 250 sheet / roll, sheet size max. 2500 x 1500mm, forming area max. 2450 x 1450mm, mold height max. 860mm, material thickness max. 12mm
Equipment machine:
> automatic loading including roller block and
Sheeter for additional roll production
> Screen controls
> Upper and lower heating can be regulated via 4 zones
> Automatic pre-blow and demolding
> Vacuum cascade can be set to 5 percentages
- table speed, upper punch speed, pre-blowing,
...
The Machineseeker Trust Seal enables buyers to quickly recognize whether they are dealing with a trustworthy seller.
What do we verify?
Check of trade licence or commercial register extract
Verification of the dealer's postal address
Validation of the banking details
Verification of accessibility to main phone number
Credit report may not contain negative criteria
Buyer complaints can lead to withdrawal of the seal
What does this mean for the seller?
After successful verification, we will include the seal awarded to you in your listings on Machineseeker. In this way, you signal to any potential buyer the independently verified seriousness of your company. This creates buyer confidence and increases the likelihood of successfully selling machines. In addition, you have the option of including the Maschinensucher seal of confidence on your homepage and letterhead.