Condition: used, Year of construction: 2002, Functionality: fully functional, saw blade diameter: 500 mm, machining length: 6,500 mm, Fully automatic CNC sawing and processing center for PVC plastic profiles in excellent condition. Sawing, processing, screwing reinforcement, drilling through steel reinforcement, label printing. RAPID Optima VI + SBC _ Year of construction 2002. Upgrade history: -2013: Replaced V-saw module. Current model for improved sawing results -2020: Added extra screw magazine. This makes it possible to use 2 types of screws -2020: Replaced control terminal with model with USB port Setup: Input magazine - processing module - sawing unit - reinforcement table - screw unit - processing module - unloading table Including discharge belt for residual pieces Excluding dust extraction Islhccqewkraqetstg Well maintained Mechanically in very good condition for this age Small risk of electrical failure due to age Can be viewed in working condition. Currently still 100% in use. Processed today Deceuninck profile _ Elegant Documentation available Must go due to replacement by new machine, available September/October 2025. Additional information available on request

Year of construction: 2021, Condition: used, 28 x high transport trolleys with wheels, for frames or glass. For internal or external transport. Or for internal storage of frames. Length: 240 cm Itjlhcjv Nzbcocqtjg Width: 59 cm Height: 280 cm (including wheels) 11 x small transport trestle, for frames or glass. Length: 120 cm Width: 54 cm Height: 135 cm

Condition: excellent (used), Year of construction: 2016, Functionality: fully functional, Complete welding and polishing line. Iolhjwh Rq Ajccqtstg Welding machine from 2016, corner polishing older but completely overhauled Machine works on Deceuninck profiles

Condition: used, Forming area max. (length,width) / mm max. depth of product positive / mm max. depth of product negative / mm Technical specifications: Roll diameter approx. 420mm Projection in width approx. 415mm Projection in height approx. 265mm Table size approx. 605 x 600 mm Belt speed 18 - 562 m/min. 8 levels Saw band length min./max. 3150 / 3260mm - Saw band speed over 4 gear stages and 2 engine speeds - Saw blade butt welder IDEAL BS 0-16 with scissors and whetstone - swiveling work table in 2 axes Dimensions: approx. L x W x H 950 mm x 750 mm x 1900 mm Weight 600kg Iolhcowgi Siocqtjtg with table feed Description has been adopted.

Condition: ready for operation (used), Year of construction: 2017, Functionality: fully functional, machine/vehicle number: 007707133, saw blade diameter: 550 mm, rotational speed (max.): 2,800 rpm, Machine recovered from the insolvency of an automotive supplier - machines are currently still in operation! Itjlhcewlgvvscqtog TECHNICAL DETAILS Tool diameter: 550 mm Saw blade speed: 2,800 rpm MACHINE DETAILS Total weight: 1,400 kg Air requirement: 200 Nl/min Operating pressure: 6 bar Further information according to the manufacturer - without guarantee Control: R 700 Angle adjustment: 45°-90° Cutting length: min. 3,700 mm Dimensions: 5.4 x 1.4 x 1.9 m at a cutting length of 3,700 mm Weight: 1.4 t

Condition: used, Year of construction: 2021, machine/vehicle number: 27798, Order No. 25138 Double-column rotary positioner with lifting device Technical specifications: - Maximum load capacity per column: 4000 kg - Total load capacity: max. 7000 kg - Travel / stroke: 1780 mm - Lifting speed: 1600 / 2800 mm/min - Electrically adjustable rotation - Right and left rotation Itelhcewigtiscqteg - Drive: 400 V - Space required for driven unit: approx. W 1500 x H 4000 x D 1500 mm - Space required for travelling unit: W 1300 x H 4000 x D 1300 mm - Weight of driven unit: approx. 4000 kg - Weight of travelling unit: approx. 2500 kg

Condition: used, Year of construction: 1989, saw blade diameter 420 mm cutting length 6000 mm 150 mm turning speeds 2800 U/min engine output je 4,0 kW connected load 8,0 kW weight of the machine ca. 1,8 t Dimensions (LxWxH) 7,0 x 1,5 x 1,5 m Double miter saw Minimum cutting length at 90° or 45°: 350mm Inward tilt range: 90° - 45° (up to 22.5° manually with digital display) Iteljwfyqtohccqtsg Inward tilt range: 90° - 45° pneumatically Compressed air connection: 7 bar Including 3 spare saw blades

Condition: used, Year of construction: 2021, In order of photos: 01) 3x Yellow compartments trolley - almost new 02) 4x Shelving upright - average age 03) 1x Yellow glass trestle - old 04) 1x Large glass trestle - average age Itolhev Nzcmoccqtsg 05) 2x L-shaped window frames transport trestle - almost new 06) 1x L-shaped window frames transport trestle - old 07) 1x Blue glass transport trestle - old 08) 1x Glass transport trestle - average age 09) 2x Blue materials trolley - old 10) 2x Yellow window frame wing compartments shelving - almost new 11) 11x Small window frames and glass transport trestle - almost new 12) 28x High window frames and glass transport trestle - almost new 13) 1x waste trolley - old 14) 1x trestle with roller for supply or discharge - average age 15) 1x trolley with rotating parts for 2 rollers with frame seals - old 16) 1x trolley with platform and rotating parts for 2 rollers with frame seals - average age 17) 1x platform trolley with 3 floors - average age 18) 1x pallet undercarriage - base average age, attachments rusted, but can be removed 19) 1x work table with height-adjustable legs - almost new 20) 1x waste bin - old 21) 1x conveyor belt table transport - old 22) 2x extra long forklift forks 23) 1x ribbon saw - average age 24) 1x wall saw - almost new 25) 1x warehouse safety steel pole - almost new 26) 1x unit with 5 lockers steel - almost new 27) 8x canteen table part, can be switched in different ways - old 28) 4x table frame thick steel - old 29) 1x open warehouse cabinet steel - old 30) 2x steel drawer cabinet - old 31) 1x desk with height adjustable legs - average age 32) 2x storage compartment cabinet steel - old

Condition: excellent (used), Year of construction: 2017, Functionality: fully functional, Automatic sawing and processing line for the production of PVC windows and doors. The machine has an infeed magazine, a processing module, a saw unit and an unloading table. The machine is in perfect condition and has very few operating hours. Including dust extraction The machine is programmed for Deceuninck profiles Itjlhccswh Rpreqtjg The machine is immediately available

Condition: excellent (used), Year of construction: 2001, Single-head welding machine for PVC windows Pressta Eisele Apollo Itelhcsp At U Escqtsg • power consumption 1.5kW /220V • max. profile width when welded at an angle of 90°-160 mm • max. profile height 160 mm • angular welding range from approx. 35° to 180° • pneumatic profile mounting • heating mirror lowered from above • mirror width 300 mm • dimensions (LxBxH) 700x660x1700 mm • weight 190 kg • "CE" safety mark

Condition: ready for operation (used), Year of construction: 2017, Functionality: fully functional, machine/vehicle number: 007707133, saw blade diameter: 550 mm, rotational speed (max.): 2,800 rpm, Machine recovered from the insolvency of an automotive supplier - machines are currently still in operation! TECHNICAL DETAILS Tool diameter: 550 mm Saw blade speed: 2,800 rpm MACHINE DETAILS Total weight: 1,400 kg Air requirement: 200 Nl/min Itslhcjwhdnzecqtjg Operating pressure: 6 bar Further information according to the manufacturer - without guarantee Control: R 700 Angle adjustment: 45°-90° Cutting length: min. 3,700 mm Dimensions: 5.4 x 1.4 x 1.9 m at a cutting length of 3,700 mm Weight: 1.4 t

Condition: used, Year of construction: 2008, Functionality: fully functional, machine/vehicle number: 101.5, Symatec corner polishing machine type Trimer 2. Ijlewb Eqkjhccqtetg • equipped / programmed for VEKA profiles 82 Softline

Condition: excellent (used), Year of construction: 2022, Functionality: fully functional, machine/vehicle number: 111-084, year of last overhaul: 2025, HSM-30/26-TURBO-T-DRIVE-CL-R4-SV Year of production 2022 ContourLine-Classic welding technology and in the V system. Possibility of welding frames and wings. Minimum weld size: 490 mm x 490 mm. Maximum weld size: 2685 mm x 3150 mm. Itolhccswlpunjqtsg Welding process 100% controlled by a servo mechanism. Programming via touch screen. High temperature welding Quick change system for the sealing film Iebevf D U Req T Rq Afjtg Quick change system for facings Diagonal or parallel joining process Individually programmable welding parameters CE-compliant safety device Horizontal collection device

Condition: excellent (used), Year of construction: 2009, Functionality: fully functional, Schirmer Cutting and Machining Center Type BAZ 1000-G2/VU including SZA450 Steel Cutting Machine Bar Machining Center Type SBZ - Cutting and Machining Center – Running direction from right to left - Automatic feed magazine for manual loading of 12 profiles, max. profile length 6500 mm, automatic transfer station into the gripper conveyor track - Insertion device for PVC profiles with NC-positioned gripper, driven by a highly dynamic linear servo motor. - Automatically adjustable profile guides for different support contours in the profiles - Machining station designed as a G-module, with 3 servo axes including clamping elements and integration into the control system. The station is equipped with high-frequency electric motors for the following processing on PVC profiles: o Drainage and ventilation slots - drilling in the frame, sash, mullions, transoms, and muntins o Lock case cutouts on window sashes, front door leaves, and side door leaves o Marking holes for mullions, transoms, and connectors that can be screwed from the inside o Profile cylinder and handle cutouts on the HAT sash o Door plate mounting holes o Sash bearing pivot holes 2x6mm / 3x2.5mm - Complete VU saw cut with double saw unit 2x45° for simultaneous sawing of the starting and cross-cut sections, as well as notch cuts for welded transoms. Saw feed with servo axis via linear servo motor and height adjustment with servo axis via ball screw. - Seal clamp above the VU saw - Conveyor belt for removing PVC waste from the VU saw machine area - Complete saw unit in standard design with 1 saw unit for cutting and cutting, continuously variable NC-controlled swivel drive, swivel range +45° to -45° for saw blade diameters of 550mm, saw motor with 2.5kW power - Horizontal circulation buffer for cycle-independent transport of profiles from the machining center to the steel insertion station, screwing station, and to the SBZ - Steel insertion station for the manual insertion of steel reinforcements with 12 insertion positions The 1st and 2nd steel insertion positions have clamps to hold the PVC profiles during manual reinforcement - Monitor as a steel length display for the steel insertion, including control unit 8 steel positions are displayed - Screwing station for the horizontal circulation buffer, operating from above and below, with frequency-controlled Electric screwdriving unit, - Additional screwdriving station with automatic screw feeder - Drilling station as a steel module, with 2 servo axes for drilling stroke and horizontal adjustment - Automatic label printer with dispensing device. The labels are manually applied to the profiles. - PC machine control / control cabinet PC C6140-0010 (TwinCat) housing Schirmer steel cutting machine type SZA 450 - Automatic feed magazine for up to 12 steel profiles, max. length 6000 mm - Saw unit for 90° cuts, saw blade diameter 450 mm Itolhccewkq Rboqteg - 3 kW saw motor, saw feed via servo drive with pneumatic control - Automatic bar feed and removal - Max. cutting length 4000 mm - Steel offcut management (steel length measurement in the steel loading magazine via 11 light barriers) - Display/monitoring system The operator is assisted in selecting the steel profiles to be loaded via the display. - Belt conveyor for cross-feeding and removal of the processed profiles

Condition: used, Year of construction: 1990, cutting diameter 500 mm Itolev U Dluehccqtsg cutting length 5000 mm saw blade diameter 420 - 500 mm dimensions ca.6400 x 1500 x 1600 mm weight ca. 1600 kg feed stufenlos Motorized length adjustment with digital display manual and spare part list included

Condition: used, Rotox water slot cutter Iolhccov Tx S Hjqtjtg for aluminum and PVC profiles

Condition: ready for operation (used), Year of construction: 1994, Functionality: fully functional, WEGOMA SD25 with 500-grit saw blade Islhcowf I Igecqtstg BECKHOFF C2001 controller with pneumatic tilting. Fully functional

Condition: good (used), Year of construction: 2011, Functionality: fully functional, Federhenn's fully automated rod machining center performs all the machining required for windows and front doors in a process-optimized manner. Capacity: approximately 100 rods per 8 hours. Ielhccqowgd Acjtotg

Condition: as good as new (ex-display), Year of construction: 2024, Pneumatic Glazing Bead Saw Type GLSP-200N-AV Pneumatic Automatic saw feeding Pneumatic work piece clamping Adjustable table height 2 x 45° motors Accessories: HM Saw blade 200 x 2.2 x 32mm HSS Saw blade 103 x 2.0 x 32mm Z=60/45° Right HSS Saw blades 103 x 2.0 x 32mm Z=60/45° Left Glazing Bead Simulation- System With feed cylinder, 1 Revolver stop with Ielhcjuydgscqtstg 16 stops and 4 clamping cylinders Fixtures for 2 Glazing Beads, support And leg adjustable for simulation Exhaust support D=80mm

Condition: excellent (used), Year of construction: 2009, Schirmer Cutting and Machining Center Type BAZ 1000-G2/VU Bar Machining Center Type SBZ - Cutting and Machining Center – Running direction from right to left - Automatic feed magazine for manual loading of 12 profiles, max. profile length 6500 mm, automatic transfer station into the gripper conveyor track - Insertion device for PVC profiles with NC-positioned gripper, driven by a highly dynamic linear servo motor. - Automatically adjustable profile guides for different support contours in the profiles - Machining station designed as a G-module, with 3 servo axes including clamping elements and integration into the control system. The station is equipped with high-frequency electric motors for the following processing on PVC profiles: o Drainage and ventilation slots - drilling in the frame, sash, mullions, transoms, and muntins o Lock case cutouts on window sashes, front door leaves, and side door leaves o Marking holes for mullions, transoms, and connectors that can be screwed from the inside o Profile cylinder and handle cutouts on the HAT sash o Door plate mounting holes o Sash bearing pivot holes 2x6mm / 3x2.5mm - Complete VU saw cut with double saw unit 2x45° for simultaneous sawing of the starting and cross-cut sections, as well as notch cuts for welded transoms. Saw feed with servo axis via linear servo motor and height adjustment with servo axis via ball screw. - Seal clamp above the VU saw - Conveyor belt for removing PVC waste from the VU saw machine area - Complete saw unit in standard design with 1 saw unit for cutting and cutting, continuously variable NC-controlled swivel drive, swivel range +45° to -45° for saw blade diameters of 550mm, saw motor with 2.5kW power - Horizontal circulation buffer for cycle-independent transport of profiles from the machining center to the steel insertion station, screwing station, and to the SBZ - Steel insertion station for the manual insertion of steel reinforcements with 12 insertion positions The 1st and 2nd steel insertion positions have clamps to hold the PVC profiles during manual reinforcement - Monitor as a steel length display for the steel insertion, including control unit 8 steel positions are displayed - Screwing station for the horizontal circulation buffer, operating from above and below, with frequency-controlled Electric screwdriving unit for screwing the steel reinforcement into the frame, sash, and mullion transom profiles. Designed for one 3.9x16mm self-drilling screw, it includes a feeder with NC-positioned gripper, driven by a highly dynamic linear servo motor. - Additional screwdriving station with automatic screw feed Ielhcjwkq Igjcqtotg - Drilling station as a steel module, with two servo axes for drilling stroke and horizontal adjustment - Automatic label printer with dispensing device. The labels are manually applied to the profiles. - PC Machine Control / Control Cabinet PC C6140-0010 (TwinCat) Case 7-slot ATX industrial PC for control cabinet installation 3 PCI slots for expansion cards up to 270 mm long and 3 PCI slots for expansion cards up to 240 mm long Drives and expansion cards easily accessible Intel Pentium 4 processor, 2.4 GHz ATX motherboard for Pentium 4 6 PCI slots, 1 GB DDR RAM, expandable to 2 GB On-board data adapter, On-board Ethernet adapter 40 GB IDE hard drive 1.44 MB floppy disk drive

Condition: used, saw blade diameter 400 mm cutting diameter 130 mm stroke 135 mm mitter cutting - all-position 0-45 ° turning speed range 1420 / 2840 U/min capacity 45 degrees: square 110 mm capacity 45 degrees: flat 50 x 240 mm capacity 90 degrees: flat 95 x 240 mm capacity 90 degrees: round 130 mm capacity 90 degrees: square 120 mm voltage 400 V total power requirement 3,7 / 4,5 kW weight of the machine ca. 600 kg dimensions of the machine ca. 1,15 x 1,20 x 1,60 m - Serial-No.: 102752 - cutting range round 130 mm - cutting range square 120 mm - cutting range flat 95 x 240 mm Itelhccqsd Scrroteg - vertical pneumatic clamping

Year of construction: 1992, Condition: good (used), machine/vehicle number: 277-6212, Offer 22271 Technical data: - Fully automatic plastering of visible surfaces, external corners , - sealing grooves , inside corners on PVC window frames + sashes Itolhcceibdkqsqteg - window sashes - min. / max. profile width up to approx. 30 / 150 mm - min. / max. profile height up to approx. 30 / 140 mm - Processing time per window corner 12 to 23 sec. - pneumatic connection 6 - 8 bar - air consumption approx. 150 l/min. - connection 400 V / 2,2 kW - Space requirement approx. W 1200 x H 1650 x D 1800 mm - Separate control cabinet approx. W 1000 x H 1300 x D 400 mm - Weight approx. 800 kg - 2 support tables with brushes W 500 x H 920 x D 1600 mm

Condition: excellent (used), Year of construction: 2020, Functionality: fully functional, type of input current: three-phase, HSM - T - DRIVE - CL - R4 - SV - 30/26. Year of production 2020. ContourLine-Classic and V-system welding technology. Possibility of welding frames and sashes and frames with threshold. Minimum dimension of welds : 490 mm x 497 mm. Maximum dimension of welds : 2690 mm x 3100 mm. 100% servo controlled welding process. Programming via touch screen. High temperature welding Islhcsvf D U Recqtetg Quick change sealing film system Quick liner replacement system Diagonal or parallel joining process Individually programmable welding parameters CE-compliant safety device Horizontal receiving device

Condition: excellent (used), Year of construction: 2015, Functionality: fully functional, Schirmer Steel Cutting Machine Type SZA 450 - Automatic feed magazine for up to 12 steel profiles, max. length 6000 mm - Saw unit for 90° cuts, saw blade diameter 450 mm - 3 kW saw motor, saw feed via servo drive with pneumatic control - Automatic bar feed and unloading - Max. cutting length 4000 mm - Steel offcut management (steel length measurement in the steel loading magazine via 11 light barriers) - Display/monitoring system The operator is assisted in selecting the steel profiles to be loaded via the display. Itslhccqowkq Dbjtsg - Belt conveyor for cross-feeding and unloading of the processed profiles

Condition: used, saw blade diameter 370 mm cutting range round 115 mm cutting range square 105 mm cutting range flat 70 x 240 mm cutting length min. 730 mm cutting lenght max. 4000 mm saw blade turning speeds 1250 / 2500 U/min table rotating 180 ° stroke 120 mm feed stepless 0 - 500 mm/min coolant capacity 45 degrees: square 95 mm capacity 45 degrees: flat 50 x 200 mm cutting speed 1250 / 2500 m/min weight of the machine ca. 1,1 t dimensions of the machine ca. 5,00 x 1,30 x 2,00 m Double Mitre Saw for aluminium consits of two SKL 370 Circular Saws Ielhccsd Il A Ioqtotg on common rails, one saw fixed one saw movable. - Serial No.: 28232 / 28233 - pneunatic clamping of workpiece - coolant equipment