Used All Electric Injection Molding Machine for sale (95,627)

Condition: excellent (used), Year of construction: 2021, operating hours: 9,000 h, clamping force: 1,000 kN, screw diameter: 30 mm, clearance between the columns: 470 mm, mold height (min.): 180 mm, ejector force: 32,000 N, ejector stroke: 150 mm, overall weight: 5,290 kg, input frequency: 50 Hz, input voltage: 400 V, ONLY APPROX. 9,000 OPERATING HOURS – FULLY ELECTRIC WITH ROBOT AND PERIPHERALS In very good condition according to the seller's assessment, and with only approx. 9,000 operating hours: this Sumitomo (SHI) Demag IntElect2 100/470-250, manufactured in 2021, impresses with its low operating hours. The extensive equipment, including an SDR-5S robot, two HB-Therm temperature controllers, and material handling equipment, makes this machine an attractive overall package. Fully electric Demag IntElect2 with robot and peripherals This used Sumitomo (SHI) Demag IntElect2 100/470-250, manufactured in 2021, combines 1,000 kN clamping force with an injection unit of size 250. The plasticizing unit is equipped with a highly wear-resistant, corrosion-resistant 30 mm screw with an L/D ratio of 20, as well as a bimetallic cylinder. Tooling space and process equipment The tie bar spacing is 470 x 470 mm; the mold height is specified as 180 to 550 mm. Two hydraulic and one pneumatic core pull circuits, integrated hot runner control for 16 zones, and an eight-fold cooling water flow controller are included in the equipment. activeProtect and the process data acquisition system PDE complement the process monitoring. Handling, temperature control, and material handling equipment The documented scope of supply includes the Sumitomo Demag SDR 5S H&P linear robot with a 3 kg payload, two HB-Therm Thermo-5 HB-160Z1 temperature controllers, two integrated conveyor belts, as well as an additional Z-conveyor and a sprue separator. Interfaces include EUROMAP 67, EUROMAP 77 / OPC UA, and EUROMAP 82.1 / OPC UA. Condition: very good, according to the seller's assessment. Operating hours: only approx. 9,000 h. Price and current availability are available upon request. I would be happy to assist you with the technical coordination of this used injection molding machine. TECHNICAL DATA Clamping force: 1,000 kN / 100 t Injection unit: 250 Screw diameter: 30 mm; L/D 20 Max. injection speed: 200 mm/s Tie bar spacing: 470 x 470 mm Mold height: 180–550 mm Ejector: 150 mm; 32 kN; 333 mm/s Crsdpfx Aqs Ahkfkovei Mains voltage: 400 V / 50 Hz Machine weight according to nameplate: 5,290 kg DELIMITATION OF THE SCOPE OF SUPPLY The KOCH KKT 55 material drying system with the associated KOCH conveyor is not included in the quoted price of the Demag. The KOCH system can be purchased separately; price on request.

Condition: excellent (used), Year of construction: 2007, operating hours: 81,000 h, functionality: fully functional, clamping force: 132 kN, screw diameter: 135 mm, injection pressure: 1,390 bar, injection weight: 7,729 g, KraussMaffei KM 1300-12000 MX + KUKA Robot! Crjdpe Ah D Dyjfx Aqvei TECHNICAL DETAILS Clamping Unit Clamping force: 1,300 t Opening stroke / mounting height: max. 2,300 mm Distance between tie bars: max. 4,000 mm Mold mounting height: min. 1,000 mm / max. 1,700 mm Tie bar height: max. 1,910 mm Mold size: min. 1,000–1,700 mm Clear tie bar spacing: 1,500 mm Nozzle radius: R40 mm Mold weight: 29,000 kg Ejector stroke: 350 mm Injection Unit Screw diameter: 135 mm Displacement volume: 8,588 cm³ Injection pressure: 1,390 bar Shot weight: 7,729 g PS MACHINE DETAILS Core pulls, ejector side / nozzle side: 1 / 1 Pneumatic needle closures: 1 Operating hours: 81,000 h EQUIPMENT KUKA robot

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 42503, clamping force: 4,000 kN, screw diameter: 70 mm, injection pressure: 1,481 bar, injection weight: 1,040 g, overall weight: 5,600 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Clamping unit Clamping force: 4,000 kN Platen length: 1,300 mm Platen width: 1,080 mm Tool height: min. 350 mm Mold opening: max. 1,300 mm Cedpfx Aqe Afw Drsvjri Injection unit Screw diameter: 70 mm Injection volume: 1,155 cm³ Injection weight: 1,040 g Injection pressure: 1,481 bar MACHINE DETAILS Rated power of the pump motor: 45 kW Dimensions & Weight Dimensions (L x W x H): approx. 8,000 x 2,250 x 2,200 mm Machine weight: approx. 5,600 kg

Condition: excellent (used), Year of construction: 2013, Engel Victory 330H/80V/160 combi Ecodrive / Production line with the Sepro SR S5-25 S3 Trans robot / Operating hours: approx. 18,000 h in automatic mode Year of construction: 2013 Injection unit: Screw diameter: 30 mm Injection weight: approx. 100 g Injection pressure: 2385 bar Dosing volume: 113 ccm Clamping unit : Clamping force: 160 t Distance between tie bars: 0x0 mm Size of the clamping plates: 750x750 mm Credpfxoz Ipqve Aqvji Ejector: hydraulic Clamping unit: hydraulic Control: CC 200 - touch screen Additional equipment: 2K injection molding machine with rotary table and robot Tie-bar-less machine, hybrid: energy-saving, high-speed and very quiet Very good technical condition Operating hours: approx. 18,000 h in automatic mode Total number of operating hours: 24,312 h Euromap 67 Robot interface Air valve x 5 Hydraulic core pull x 5 Control unit with hot runners x 16 Reinforced injection units - bimetal Main motors - 2 x servo motor controlled with inverter Proportional valves on injection units - precise spraying Screw diameter in the vertical injection unit: ⌀22 mm - approx. 28 g/hp It is possible to purchase a turntable Robot Sepro SR S5-25 S3 Trans Year of construction: 2013 3-axis robot: 3 axes are driven by servomotors (electric): X, Y, Z (telescopic) Travel distances in axes approx.: X-2000, Y-1000, Z-1500 Automatic axis lubrication Touch control panel The safety package for robots Robot with adapter and protective housing Purchase of the robot for an additional charge Dimensions Weight: 8700 kg Length/width/height: 5.35x1.76x3.42 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2018, Krauss Maffei KM 200-1400 CX with Krauss Maffei LRX Easy Control 100 Robot / Operating hours: 12,000 h in automatic mode Year of manufacture: 2018 Injection Unit: Screw diameter: 60 mm Shot weight: 617 g Injection pressure: 2007 bar Dosage volume: 679 ccm Clamping Unit: Clamping force: 200 t Tie bar distance: 560x560 mm Platen size: 915x915 mm Ejector: hydraulic Clamping unit: hydraulic Control system: MC6 – touchscreen Additional equipment: Very good technical condition Operating hours: 12,000 h in automatic mode Euromap 67 Robot interface Air valve with vacuum measurement x 1 Hydraulic core pull x 3 Pneumatic core pull x 3 Control system for hot runner zones x 10 Hardened injection unit – bimetallic Energy-efficient machine – features a system with 3 variable displacement hydraulic pumps Parallel movements Codpez Ipm Refx Aqvsri Proportional valve on injection unit – precise injection Machine manufactured in December 2018, delivered to customer in 2019 Krauss Maffei LRX Easy Control 100 Robot Year of manufacture: 2019 4-axis robot: 3 axes driven by servo motors (electric); axis C – pneumatic Touch control panel Safety package for robot Robot with interface, conveyor belt, and safety enclosure Purchase of robot and conveyor belt at additional cost Dimensions: Weight: 11,500 kg Length/Width/Height: 6.10x2.20x2.30 m All machines offered are started up by our service technicians before sale. It is possible to receive a video of the technical tests for the selected machine, or to participate in live technical demonstrations at our premises in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2012, Arburg 520S 1600-400/170 e² / Production line with Geiger robot Year of manufacture: 2012 Injection unit: Screw diameter: 35 mm Shot weight: 141 g Injection pressure: 2500 bar Dosage volume: 154 ccm Clamping unit: Clamping force: 160 t Tie bar spacing: 520 x 520 mm Platen size: 695 x 695 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA - touchscreen Additional equipment: 2K injection molding machine with rotary table and Geiger robot Very good technical condition Hybrid machine: energy-saving and very quiet Csdpfx Asz Ip Tdjqvori Euromap 67 Robot interface Air valve x 4 Hydraulic core pull x 5 Control system with 12 hot runner zones Reinforced injection units – bimetallic Machine with two cylinders / batteries with compressed nitrogen (additional charge for fast operation) The machine features a built-in servomotor in the injection unit responsible for dosing the plastic Parallel movements Screw diameter in the vertical injection unit: ⌀30 mm - 77 g/PS Integrated Arburg brand conveyor belt and sorting flap Original Weber brand rotary table, highly precise – electrically driven (integrated inverter in the machine) Rotary table and robot available as an additional purchase Dimensions: Weight: 8140 kg Length/Width/Height: 4.81 x 1.84 x 3.45 m All offered machines are started up by our service technicians prior to sale. A video of the technical tests for the selected machine can be provided, or you can participate in live technical tests at our facilities in Łódź. Price: On request

Condition: used, Year of construction: 2016, Central process cooling system for injection molding – industrial cooling system / chilled water system For sale is a comprehensive industrial process cooling and chilled water system, which was previously installed in a plastics processing injection molding facility. The system served as the central chilled water supply within the plastics production and consists of several refrigeration and compressor units, heat exchangers, pump groups, water tanks, and a Siemens control system. It is designed for industrial cooling processes and can also be used in other production areas after appropriate technical inspection and adjustment. Possible applications Central chilled water supply for injection molding machines Cooling of injection molds Cooling of hydraulic and machine circuits Process cooling in plastics processing Chilled water supply for extrusion systems Industrial machine and production cooling Technical equipment MAIN refrigeration unit on a steel frame Several industrial compressor units 4 Copeland compressors, divided into two refrigeration circuits SONDEX plate heat exchanger, type S47-IG10 Year of manufacture of heat exchanger: 2016 Rated output of heat exchanger: 250 kW Heat transfer area: 33.42 m² Siemens SIMATIC HMI touchscreen control Several industrial circulation pumps Chilled water and storage tanks Pipeline system with fittings and shut-off valves Crsdpfo Ah T Rtex Aqvji Pressure and temperature monitoring Water treatment and dosing technology The refrigerants R134a and R407C are indicated on various parts of the system. Further information The system is designed as a stationary central chilled water supply and was installed in a plastics injection molding facility. The sale is from the current location. Inspection is possible after prior arrangement. Further information and pictures are available upon request. The buyer must dismantle, load, and transport the system. Location: Frechen _____ Subject to prior sale and errors in technical data. The technical data has been compiled to the best of our knowledge, but does not constitute guaranteed characteristics. Our general terms and conditions apply, and the seller is not liable for typing or data transmission errors. The appearance of the offered items corresponds to their age and the images shown. The technology and wear and tear of the offered items are consistent with their age. Used machines are sold exclusively to commercial enterprises and without warranty.

Condition: excellent (used), Year of construction: 2011, Krauss Maffei KM 350-2000 AX / Electric Machine / Production line with the Krauss Maffei LRX150-1018 robot Year of manufacture: 2011 Injection unit: Screw diameter: 60 mm Shot weight: 720 g Injection pressure: 2420 bar Dosing volume: 792 ccm Clamping unit: Clamping force: 350 t Tie bar spacing: 810x730 mm Mold size: 1110x1030 mm Ejector: electric Clamping unit: toggle Control system: MC6 - Touchscreen Additional equipment: Electric machine: energy-saving and very quiet Euromap 67 Robot interface Air core puller x 2 on the side of the fixed mold platen Hydraulic core puller x 3 on the side of the moving mold platen Control system with hot runner system x 10 Injection unit is wear-resistant and resistant to corrosion Main motor of the machine - servo motor driven by an inverter - energy saving Central lubrication Parallel movements Automatic tool height adjustment Robot Krauss Maffei LRX150-1018 Year of manufacture: 2011 5-axis robot: 4 axes are driven by servo motors (electric): X, Y-telescopic, Z, B-rotation; Axis C – pneumatic Travel distances in axes: X-900, Y-1800, Z-2500 Safety package for robot Robot with adapter, conveyor belt and protective housing Purchase of the robot and the conveyor belt at an additional cost Dimensions: Weight: 22600 kg Length/Width/Height: 8.00x2.35x2.30 m Crsdpfxoz Ippro Aqvei All machines offered will be started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2019, Krauss Maffei KM 121-380 PX / Electric Machine Year of manufacture: 2019 Injection unit: Screw diameter: 35 mm Shot weight: 140 g Injection pressure: 2429 bar Dosing volume: 154 ccm Clamping unit: Clamping force: 120 t Tie bar spacing: 470x420 mm Platen size: 640x590 mm Ejector: electric Clamping unit: toggle Control: MC6 - Touchscreen Additional equipment: Machine in very good technical condition Electric machine: energy-saving and very quiet Operating hours: approx. in automatic mode Euromap 67 Robot interface Air valve with vacuum x 2 Hydraulic core pull x 1 Control system with hot runner nozzles x 15 Injection molding unit is wear-resistant and corrosion-resistant Main motor of the machine - servo motor driven by an inverter - energy saving Central lubrication Parallel movements Automatic tool height adjustment Dimensions: Crsdjz Ipltjpfx Aqvoi Weight: 9400 kg Length/Width/Height: 5.10x1.60x1.88 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in technical live tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 161394, clamping force: 6,500 kN, screw diameter: 90 mm, injection weight: 2,254 g, overall weight: 33,000 kg, TECHNICAL DETAILS Clamping Unit Clamping force: 6,500 kN Horizontal column spacing: 1,025 mm Vertical column spacing: 930 mm Tool height: min. 450 mm Tool height: max. 950 mm Opening stroke: max. 1,800 mm Injection Unit Screw diameter: 90 mm Injection volume: 2,480 cm³ Injection weight: 2,254 g MACHINE DETAILS Rated power of the pump motor: 55 kW Heating capacity: 62 kW Dimensions & Weight Csde Afw Hyspfx Aqvjri Dimensions (L x W x H): approx. 8,300 x 2,500 x 2,330 mm Machine weight: approx. 33,000 kg

Condition: excellent (used), Year of construction: 2013, Arburg 520H 1500-800 e² / Hybrid machine / Production line with the Arburg Multilift H side robot Year of manufacture: 2013 Injection unit: Screw diameter: 55 mm Shot weight: 434 g Injection pressure: 1650 bar Dosing volume: 474 ccm Codoz Ip Rvspfx Aqvjri Clamping unit: Clamping force: 150 t Tie bar spacing: 520x520 mm Platen size: 695x695 mm Ejector: electric Clamping unit: toggle Control system: SELOGICA - Touchscreen Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Euromap 67 Robot interface Control with air valve Hydraulic core pull x 1 Control with hot runner system x 12 Injection unit hardened - bimetal Main motor of the machine - servo motor driven by inverter - energy saving The injection unit is driven by a servo motor, which is controlled by an inverter Machine with cylinder / battery with compressed nitrogen (additional charge for fast operation) Central lubrication Automatic tool height adjustment Kistler sensor - tool pressure control The injection molding machine was operated in a so-called "clean room", has additional protection against contamination and two vapor absorbers Side robot Arburg Multilift H 5-axis robot: Z-axis servo motor driven (electric); X, Y and B axes (rotation) pneumatic Safety package for robots Robot with adapter, conveyor belt with electric height adjustment, protective housing Purchase of the robot and the conveyor belt for an additional charge Dimensions: Weight: 6680 kg Length/Width/Height: 5.03x1.56x2.21 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: not inspected (used), Year of construction: 2005, functionality: unexamined, working width: 205 mm, working height: 60 mm, Spraying machine for profiles / Automatic spraying machine for moldings Manufacturer: Falcioni Type: Flexispray Year of manufacture: 2005 Linear continuous spraying machine for the automatic coating of profile moldings, frame moldings, profile boards, and baseboards, with a spray booth, belt conveyor, and programmable gun control. Typical applications: Molding production, frame and picture frame manufacturing, profile wood and panel production, contract coating. Intended coating materials according to the manufacturer: - UV stains and water-based stains - Water-based paints applied by spraying - UV paints Workpiece dimensions: Max. working width 205 mm Max. workpiece height 60 mm Minimum workpiece length 400 – 800 mm Feed: Feed speed 20 – 120 m/min Conveyor drive 0.75 kW, inverter-controlled Extraction: Exhaust fan 0.55 kW Exhaust capacity 5000 m³/h Compressed air: Operating pressure for gun control 4 – 5 bar Compressed air consumption 1200 Nl/min Electrical system: Installed total power 1.6 kW Machine weight approx. 600 kg Equipment: - 3 spray guns - without material pump Basic concept: - Spray booth with large-area glazing - Rubber-coated conveyor belts at the infeed and outfeed, roller conveyor in the spraying zone - Gun activation via workpiece detection with a pressure roller and microswitch - Electronic control system VT 50 for programming gun height and on/off points for each gun, display of belt speed, meters produced, and quantity - Overspray recovery via collection trays and collection tanks - Dry filter system for exhaust air purification - Operation by one person Note: The technical specifications have been taken from the manufacturer's operating manual and may differ from the actual design of the machine. Cedpfx As Adrrzeqveri

Condition: not inspected (used), Year of construction: 2005, functionality: unexamined, working width: 205 mm, working height: 60 mm, Spraying machine for profiles / Automatic spraying machine for moldings Manufacturer: Falcioni Type: Flexispray Year of manufacture: 2005 Linear continuous spraying machine for the automatic coating of profile moldings, frame moldings, profile boards, and baseboards, with a spray booth, belt conveyor, and programmable gun control. Typical applications: Molding production, frame and picture frame manufacturing, profile wood and panel production, contract coating. Intended coating materials according to the manufacturer: - UV stains and water-based stains - Water-based paints applied by spraying - UV paints Workpiece dimensions: Max. working width 205 mm Max. workpiece height 60 mm Minimum workpiece length 400 – 800 mm Feed: Feed speed 20 – 120 m/min Conveyor drive 0.75 kW, inverter-controlled Extraction: Exhaust fan 0.55 kW Exhaust capacity 5000 m³/h Compressed air: Operating pressure for gun control 4 – 5 bar Compressed air consumption 1200 Nl/min Electrical system: Installed total power 1.6 kW Machine weight approx. 600 kg Equipment: - 3 spray guns - without material pump Basic concept: - Spray booth with large-area glazing - Rubber-coated conveyor belts at the infeed and outfeed, roller conveyor in the spraying zone Cjdpfj Aa Ad Tsx Aqvsri - Gun activation via workpiece detection with a pressure roller and microswitch - Electronic control system VT 50 for programming gun height and on/off points for each gun, display of belt speed, meters produced, and quantity - Overspray recovery via collection trays and collection tanks - Dry filter system for exhaust air purification - Operation by one person Note: The technical specifications have been taken from the manufacturer's operating manual and may differ from the actual design of the machine.

Condition: excellent (used), Year of construction: 2019, Krauss Maffei KM 161-540 PX / Electric Machine Year of manufacture: 2019 Injection unit: Screw diameter: 40 mm Shot weight: 206 g Injection pressure: 2377 bar Dosing volume: 226 ccm Clamping unit: Clamping force: 160 t Tie bar spacing: 520x470 mm Platen size: 710x660 mm Ejector: electric Credpfjz Ipm Dex Aqvoi Clamping unit: toggle Control: MC6 - Touchscreen Additional equipment: Machine in very good technical condition Electric machine: energy-saving and very quiet Operating hours: approx. in automatic operation Euromap 67 Robot interface Air valve with vacuum x 2 Hydraulic core pull x 1 Control with hot runners x 15 Injection unit is wear-resistant and corrosion-resistant Main motor of the machine - servomotor driven by an inverter - energy saving Central lubrication Parallel movements Automatic tool height adjustment Dimensions: Weight: 13200 kg Length/Width/Height: 5.60x1.72x1.95 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2011, Arburg 520S 1600-290/100 / Production line with Wittmann W823 robot / Operating hours: 20,181 h in automatic mode Year of construction: 09.2011 Injection unit: Screw diameter: 35 mm Injection weight: 132 g Injection pressure: 2000 bar Metering volume: 144 ccm Clamping unit: Clamping force: 160 t Distance between tie bars: 520x520 mm Size of the clamping plates: 695x695 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA touchscreen Additional equipment: 2K injection molding machine with rotary table and robot Very good technical condition Operating hours: 20,181 h in automatic mode Total number of operating hours: 28,473 h Euromap 67 Robot interface Air valve x 3 Hydraulic, needle core pull, controlled by a proportional valve x 2 Reinforced injection units - bimetal Proportional valves on injection units - precise spraying Machine with two cylinders / batteries with compressed nitrogen (additional charge for fast work) Parallel movements Credpfx Asz Ip Smeqvsi Screw diameter in the vertical spraying unit: ⌀25 mm - 45 g/hp Original turntable Purchase of the turntable for an additional charge Robot Wittmann W823 Year of construction: 2015 5-axis robot: 3 axes are driven by servo motors (electric); axis C and movement A Travel in axes: X-550, Y-1400 (telescopic), Z-3500 Touch control panel The safety package for robots Robot with adapter, protective housing Purchase of the robot for an additional charge Dimensions Weight: 6720 kg Length/width/height: 4.41x1.84x3.20 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2011, Arburg 520H 1500-400 e² / Hybrid Machine Year of manufacture: 2011 Injection unit: Screw diameter: 40 mm Shot weight: 184 g Injection pressure: 2000 bar Dosage volume: 201 cc Cedpfx Aqjz Ip Nlevsri Clamping unit: Clamping force: 150 t Tie bar distance: 520x520 mm Platen size: 695x695 mm Ejector: electric Clamping mechanism: toggle lever Control system: SELOGICA - touchscreen Additional equipment: Hybrid machine: energy-saving and very quiet Euromap 67 Robot interface Air valve x 4 on the fixed platen side Air valve x 3 on the moving platen side Hydraulic core pull x 1 on the fixed platen side Injection unit hardened - bimetal Main motor of the machine - servo motor driven by inverter - energy-saving The injection unit is driven by a servo motor controlled by an inverter Machine equipped with cylinder/battery with compressed nitrogen (additional charge for fast operation) Central lubrication Parallel movements Automatic mold height adjustment Dimensions: Weight: 6550 kg Length/Width/Height: 4.67x1.56x2.21 m All machines offered are started up and tested by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2017, Engel Victory 330H/200V/140 combi Ecodrive / Production line with the Sepro Multi Inject 20 robot / Operating hours: approx. 18,000 h in automatic mode Year of construction: 2017 Injection unit: Screw diameter: 30 mm Injection weight: approx. 100 g Injection pressure: 2400 bar Dosing volume: 113 ccm Clamping unit: Clamping force: 140 t Distance between tie bars: 0x0 mm Size of the clamping platens: 750x750 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 300 - touch screen Additional equipment: 2K injection molding machine with rotary table and robot Tie-bar-less machine, hybrid: energy-saving, high-speed and very quiet Very good technical condition Operating hours: approx. 18,000 in automatic mode Total number of operating hours: 25,369 h Euromap 67 Robot interface Air valve x 8 Hydraulic core pull x 5 Control unit with hot runners x 16 Reinforced injection units - bimetal Main motors - 2 x servo motor controlled with inverter Proportional valves on injection units - precise spraying Parallel movements Built-in pressure quality control system from Sensor Kistler - mold pressure measurement Screw diameter in the vertical injection unit: ⌀25 mm - approx. 58 g/hp It is possible to purchase the original Foboha turntable for an additional charge Turntable diameter: 740 mm Sepro Multi Inject 20 robot Year of construction: 2017 3-axis robot: 3 axes are driven by servo motors (electric): X, Y, Z (telescopic) Travel distances in axes approx.: X-4000, Y-1200, Z-1500 Automatic axis lubrication Touch control panel Crodsz Ipqpepfx Aqvei The safety package for robots Robot with adapter and protective housing Purchase of the robot for an additional charge Dimensions Weight: 10300 kg Length/width/height: 5.56x1.76x3.46 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2016, Arburg 570S 2200-290/100/100 / Production line with the Wittmann W823 robot / Operating hours: 20,499 h in automatic mode Year of construction: 2016 Injection unit: Screw diameter: 35 mm Injection weight: 132 g Injection pressure: 2000 bar Metering volume: 144 ccm Clamping unit: Clamping force: 220 t Distance between tie bars: 570x570 mm Size of the clamping platens: 795x795 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA touchscreen Additional equipment: 3-component injection molding machine, high speed Very good technical condition Operating hours: 20,499 h in automatic mode Codpfx Aqez Iqaxevjri Euromap 67 Robot interface Air valve x 6 Hydraulic, needle core pull, controlled by a proportional valve x 4 Control unit with hot runners Hardened injection unit - bimetal Proportional valve on the injection unit - precise injection Machine with two cylinders / battery with compressed nitrogen (additional charge for fast work) The machine is designed for operation with an electric turntable. The machine has an inverter to control the servomotor in the rotary table and an interface for connecting the rotary table Parallel movements Screw diameter in the vertical injection unit: ⌀25 mm - 45 g/hp Screw diameter in the lateral injection unit: ⌀25 mm - 45 g/hp Wittmann W823 robot Year of construction: 2015 5-axis robot: 3 axes are driven by servomotors (electric); axis C and movement A Travel in axes: X-550, Y-1400 (telescopic), Z-3500 Touch control panel The safety package for robots Robot with adapter, conveyor belt and protective housing Purchase of the robot and conveyor belt for an additional charge Dimensions Weight: 10830 kg Length/width/height: 5.53x1.77x3.29 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2011, Engel Victory 1350/260 Tech Ecodrive with Engel Viper 20 Robot / Hybrid Machine Year of Manufacture: 2011 Injection Unit: Screw diameter: 55 mm Shot weight: approx. 590 g Injection pressure: 2183 bar Dosage volume: 618 ccm Clamping Unit: Clamping force: 260 t Tie-bar spacing: 0x0 mm Platen size: 1100x1000 mm Ejector: hydraulic Clamping unit: hydraulic Control system: CC 200 - Touchscreen Additional Equipment: Production line with Engel Viper 20 Robot Machine in very good technical condition Tie-barless hybrid machine: energy-saving and very quiet 8x air valve on the fixed platen side 2x hydraulic core pull on the fixed platen side 2x hydraulic core pull on the moving platen side 18 hot runner control zones Injection unit is wear-resistant and corrosion-proof Main drive motor – servo motor with inverter – energy-saving Crjdpfoz Iptkjx Aqvsi Proportional valve on injection unit – precise injection Engel Viper 20 Robot Year of Manufacture: 2011 6-axis robot: 4 axes (X, Y, Z, B - rotation) driven electrically by servo motors; axes A and C – pneumatic Robot safety package Robot with adapter, conveyor belt, and Engel brand safety enclosure Purchase of robot and conveyor belt available at extra cost Dimensions: Weight: 19,400 kg Length/Width/Height: 7.06x2.03x2.30 m All offered machines are started and tested by our service technicians before sale. A video of the technical tests of the selected machine can be provided, or you can attend live technical tests at our facility in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2021, Chen Hsong JetMaster 208-MK6 with Samfacc robot / hybrid machine Year of manufacture: 2021 Injection unit: Screw diameter: 52 mm Shot weight: 502 g Injection pressure: 1893 bar Dosing volume: 552 ccm Cjdpfx Aez Ipwpeqvjri Clamping unit: Clamping force: 208 t Tie bar spacing: 530x530 mm Platen size: 790x765 mm Ejector: electric Clamping unit: toggle Control system: BECKHOFF - Touchscreen Additional equipment: Hybrid machine: high-speed, energy-saving, and very quiet Euromap 67 Euromap 12 Robot interface Air valve x 2 Hydraulic core pull x 2 Control system with hot runner system x 8 Injection unit hardened - bimetal Main motor of the machine - servo motor driven by inverter - energy saving Central lubrication Automatic tool height adjustment Rexroth hydraulics The machine has been serviced in Germany Samfacc robot Year of manufacture: 2022 4-axis robot: 3 axes are driven by servo motors (electric): X, Y (telescopic), Z; Axis C – pneumatic Safety package for robots Robot with adapter, conveyor belt, and safety enclosure Purchase of the robot and conveyor belt available at an additional cost Dimensions: Weight: 6800 kg Length/Width/Height: 6.10x1.50x2.00 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2018, Bilion H470-200T Select / Electric Injection Molding Machine / Production line with Wittmann W823 robot Year of manufacture: 08.2018 Injection unit: Screw diameter: 38 mm Shot weight: approx. 125 g Injection pressure: 1564 bar Metering volume: 163 ccm Clamping unit: Clamping force: 200 t Tie bar spacing: 610x610 mm Platen size: 870x870 mm Ejector: electric Clamping unit: toggle Controller: Dixit 3 - Touchscreen Additional equipment: Excellent technical condition Electric machine: energy-saving and very quiet Operating hours: h in automatic operation Euromap 67 Robot interface Air valve x 6 Air core pull x 3 Controller with hot runner system Injection unit hardened - bimetal Proportional valve on the injection unit - precise injection Central lubrication Automatic tool height adjustment Parallel movements Wittmann W823 robot Year of manufacture: 2014 4-axis robot: 3 axes are driven by servomotors (electric): X, Y (telescopic), Z; Axis C - pneumatic Travel distances in axes: X-550, Y-1000, Z-2500 Touchscreen control panel Safety package for robot Robot with adapter, conveyor belt, protective housing Purchase of the robot and conveyor belt available for an additional cost Dimensions: Weight: 8700 kg Length/Width/Height: 5.90x1.80x2.10 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Crodpfxsz Ipxgj Aqvoi Price: On request

Condition: excellent (used), Year of construction: 2020, Krauss Maffei KM 81-380 PX with Sepro Industrial Robot Succes 7 / Electric Machine Year of manufacture: 2020 Injection unit: Screw diameter: 35 mm Shot weight: 140 g Injection pressure: 2429 bar Dosing volume: 154 ccm Clamping unit: Clamping force: 80 t Tie bar spacing: 420x370 mm Platen size: 560x510 mm Ejector: electric Clamping unit: toggle Control system: MC6 - Touchscreen Additional equipment: Machine in very good technical condition Electric machine: energy-saving and very quiet Operating hours: approx. in automatic mode Euromap 67 Robot interface Air valve with vacuum x 2 Hydraulic core pull x 1 Control system with hot runner nozzles x 15 Injection unit is wear-resistant and resistant to corrosion Main motor of the machine - servo motor driven by an inverter - energy saving Central lubrication Parallel movements Credpfx Aqoz Iqniovji Automatic tool height adjustment Robot Industrial Robot Succes 7 Year of manufacture: 2017 4-axis robot: 3 axes are driven by servo motors (electric): X, Y, Z; axis C – pneumatic Safety package for robots Robot with adapter, conveyor belt and safety enclosure Purchase of the robot and conveyor belt at an additional cost Dimensions: Weight: 7900 kg Length/Width/Height: 4.90x1.53x1.85 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in technical live tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2019, Krauss Maffei KM 250-2000 CX Blue Power with Sepro Industrial Robot SR S5-35HL S4 Trans Year of manufacture: 2019 Injection Unit: Screw diameter: 70 mm Shot weight: 980 g Injection pressure: 1877 bar Metering volume: 1077 cm³ Clamping Unit: Clamping force: 250 t Tie bar spacing: 630x630 mm Platen dimensions: 995x1050 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC6 – touchscreen Additional Equipment: Very good technical condition Operating hours: approx. h in automatic mode Euromap 67 Robot interface Air valve with vacuum measurement x 1 Air valve x 1 Hydraulic core pull x 3 Crjdpfoz Ipnbex Aqvoi Pneumatic core pull x 1 Hot runner control x 16 Hardened injection unit – bimetallic Energy-efficient machine – equipped with a system of 3 variable displacement hydraulic pumps Parallel movements Proportional valve on injection unit – precise injection Additional oil filtration pump Sepro Industrial Robot SR S5-35HL S4 Trans Year of manufacture: 2015 5-axis robot: 4 axes driven by servomotors (electric): X, Y, Z, B; C axis Touch screen control panel Robot safety package Robot with adapter, conveyor belt, and safety enclosure Purchase of robot and conveyor belt available at an extra charge Dimensions: Weight: 20,100 kg Length/Width/Height: 6.50x2.20x2.30 m All machines offered are started up by our service technicians before sale. A video of the technical tests of the selected machine can be provided or it is possible to participate in live technical tests at our facility in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2012, Arburg 520H 1500-800 e² / Hybrid Machine / Production Line with Side Robot Arburg Multilift H Year of manufacture: 04.2012 Injection Unit: Screw diameter: 55 mm Shot weight: 434 g Injection pressure: 1650 bar Dosage volume: 474 ccm Clamping Unit: Clamping force: 150 t Tie bar distance: 520x520 mm Platen size: 695x695 mm Ejector: electric Clamping unit: toggle lever Control system: SELOGICA - Touchscreen Additional Equipment: Hybrid machine: high-speed, energy-saving, and very quiet Control system with air valve Core pull control Hot runner control x 12 Injection unit hardened - bimetallic Main drive motor - servo motor with inverter - energy saving Injection unit driven by servomotor controlled by inverter Machine equipped with cylinder / battery with compressed nitrogen (additional charge for fast operation) Central lubrication Automatic mold height adjustment Kistler sensor - mold pressure regulation The injection molding machine was operated in a so-called "cleanroom," and is fitted with extra protective devices against contamination and two vapor absorbers Side robot Arburg Multilift H Year of manufacture: 2012 Crsdpfxoz Ip N Es Aqvei 5-axis robot: Z-axis driven by servo motor (electric); X, Y, and B axes (rotation) pneumatically operated Robot safety package Robot with adapter, conveyor belt with electric height adjustment, safety enclosure Purchase of robot and conveyor belt at extra cost Dimensions: Weight: 6,820 kg Length/Width/Height: 5.03x1.56x2.21 m All offered machines are started up by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Condition: used, Year of construction: 2016, Arburg 270C 400-70 e² with Arburg Multilift Robot / Hybrid Machine Year of manufacture: 2016 Injection Unit: Screw diameter: 22 mm Shot weight: 31 g Injection pressure: 2000 bar Dosage volume: 34 ccm Clamping Unit: Clamping force: 40 t Tie bar spacing: 270x270 mm Platen size: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA - Touchscreen Additional Equipment: Hybrid machine: energy efficient and extremely quiet Euromap 67 Robot interface Air valve x 2 Hydraulic core pull x 1 Injection unit hardened - bimetallic Main machine motor - servo motor with inverter drive - energy saving Proportional valve on injection unit – precise injection Self-sealing nozzle Arburg Multilift Select 6 kg traverse robot Year of manufacture: 05.2016 5-axis robot: 3 axes driven by servo motors (electric); axes B and C Travel paths in axes: X-600, Y-800, Z-1000 Crodjz Iqvaspfx Aqvsi Robot with adapter, conveyor belt, and safety enclosure Purchase of robot and conveyor belt available at extra cost Dimensions: Weight: 2210 kg Length/Width/Height: 3.18x1.43x1.98 m All machines offered are started up by our service engineers before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request