Vacuum Forming Machine

Hassett 3000x3500x1100

Condition: new, functionality: fully functional, Year of construction: 2024, laser power: 6,000 W, sheet thickness (max.): 25 mm, sheet thickness steel (max.): 25 mm, workpiece weight (max.): 800 kg, overall weight: 5,000 kg, total length: 5,000 mm, total width: 2,500 mm, total height: 2,200 mm, warranty duration: 12 months, feed length X-axis: 3,000 mm, feed length Y-axis: 1,500 mm, working range: 3,000 mm, With the OR-S1530, Oree Laser offers a compact and easy-to-operate laser cutting system in large format. Our company, SF-Tech Engineering GmbH, is the Swiss representative of Oree Laser. All machines are newly imported and assembled according to customer requirements. We also provide training and service. In our showroom you can test the OR-S1530 including all accessories (high pressure compressor, suction system...). Technical data Working area: 3060mm X 1530mm External dimensions: L:4950, W:2300, H:2130 Weight: approx. 4'500kg Positioning accuracy: 0.03mm Max. Cutting speed: 115m/min Maximum acceleration: 0.8G Fgedpfx Ador D N Dzo Nji Laser power: 6000 Watt Laser source: MAX Cutting head: Raytool or BOCI Fume extraction: Zone controlled fume extraction The side machine door can be easily raised or lowered at the touch of a button. The total height of the machine is 2200mm. The work table can be easily pulled out of the side of the machine by hand. This enables safe and fast loading and unloading of the machine. There are two new variants: 1st variant, a 60% extension table, without support on the floor, max. 800kg load. 2nd variant, a 120% extension table, with fold-out arms, max. 900 kg load. Do not hesitate to visit us in our showroom in 6281 Hochdorf.

Condition: used, Year of construction: 2014, functionality: fully functional, turning length: 3,200 mm, turning diameter: 900 mm, spindle speed (max.): 1,500 rpm, travel distance X-axis: 470 mm, travel distance Z-axis: 3,235 mm, spindle motor power: 45 W, total height: 2,780 mm, total length: 7,360 mm, quill travel distance: 150 mm, quill diameter: 160 mm, swing diameter over cross slide: 800 mm, overall weight: 21,800 kg, swing diameter over bed slide: 1,030 mm, bar passage: 164 mm, spindle nose: A1-15, Doosan Puma 700L Large Capacity Lathe Built 2014 Fodpfowqf Uusx Ad Njgi Accessories include Swarf Conveyor, Tailstock with Mt #6 Taper, SMW Hydraulic Steady, 800mm 3 Jaw Chuck, FANUC 32i Control.

Condition: good (used), Year of construction: 2011, Make WM Model FC 780E Fgjdpfx Aettlzfed Nji Year 2011 Condition Excellent Approx Working Hours 25,390 Stations Forming Cutting and Stacking Max Tool Size 780 x 570 mm Depth of draw 130 / 130 mm Max material width 810 mm Max Sheet Thickness 1.8 mm Max mould closing force 20,000 daN Maximum cycles-minute 45 Forming pressure 7 bar All details are subject to change and/or errors. All equipment is subject to availability and/or prior sale.

Year of construction: 2023, operating hours: 100 h, condition: new, functionality: fully functional, machine/vehicle number: 1500, ICE CREAM MAKING MACHINERY practically new, only used for the first tests, in Seville (Spain): - FREEZER EXPLORER 1500 WITH PISTON PUMPS - FANUC LR Mate 200iD 7LG ROBOT Fgedpfxev Akgno Ad Nei - RIPPLE PUM 1LT AND 7LT - FRUIT FEEDER FF10

Condition: good (used), Year of construction: 1990, Fixed Bed Milling Machine CORREA A25/25 Travel X: 2500 mm Travel Y: 1200 mm Fedpfx Aevy T Euod Nsgi Travel Z: 1000 mm CNC HEIDENHAIN TNC 355 Spindle: SA 50 Spindle motor: 30 CV Spindle speed: from 2 to 3000 RPM Table size: 3000 x 1000 mm Year of construction: 1990 Maxi eligible load on table: 7 T Manual Swivel Head Voltage: 380 V Dimensions (L x W x H): 5000 x 3000 x 3000 mm Weight: 16,5 T

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, turning diameter over cross slide: 500 mm, turning length: 1,630 mm, turning diameter: 500 mm, spindle bore: 62 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 45 rpm, travel distance X-axis: 430 mm, travel distance Y-axis: 190 mm, travel distance Z-axis: 1,474 mm, spindle motor power: 22,000 W, rapid traverse X-axis: 25 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 20 m/min, total height: 23,000 mm, total length: 54,050 mm, total width: 28,880 mm, Equipment: documentation/manual, Okuma MacTurn 30 - 1500 OSP U100L CNC-Controller Number of axis - 5 +2 Swing over bed - Ø500mm Swing over carriage - Ø500mm Max dia. turning - Ø500 mm Max turning length - 1474 mm X axis Upper travel - 430 mm X axis Lower travel - 140 mm Z axis Upper travel - 1474 mm Z axis Lower travel - 1305 mm Y axis travel - 190 mm (+95/-95mm) W axis travel - 1305 mm C axis 360° (0.001 increment) Rapid travers Upper X-axis 20,000 mm/min Lower X-axis 15,000 mm/min Upper Z-axis 25,000 mm/min Lower Z-axis 20,000 mm/min Y -axis 12,000 mm/min C-axis 200 rpm Spindle nose - JIS A2-6 Main spindle speed - 45-4500 rpm Sub spindle speed - 45-4500 rpm Main spindle power - 15 kW Sub spindle power - 15 kW Main spindle diameter - Ø100 mm Sub spindle diameter - Ø100 mm Main spindle boring - Ø62 mm Sub spindle boring - Ø62 mm Rotary tool spindle - 6000rpm Rotary tool spindle - 6,8kW ATC Magazine - BT40 Tool storage capacity - 40 tool Max tool dia. - Ø110 mm Fsdpfsrdvhhjx Ad Nsgi Max. tool lenght 300 mm Max. tool mass - 10 kg Chip conveyor type high Wight - 12100kg

Condition: good (used), BYSTRONIC HYDRAULIC BENDING MACHINE 3100X150 TON, MAX STROKE 315 mm, RAPID STROKE DOWN 190 mm/s, WORKING CYCLE 10 mm/s, RAPID STROKE UP 150 mm/s, DIMENSIONS: 415X200X290cm (h) WEIGHT 11,000 KG Y1 Y2: hydraulic cylinder axes. X forward and backward axis of the register. R upward and downward axis of the register. Z1 and Z2 axes of the movement to the right and left of the stops. X1 or relative X which is the axis of the movement forward and backward of a single stop. 7 axes. The control also manages the hydraulic crowning, which can be considered the eighth axis. Fgjdovxipgspfx Ad Nei

Condition: excellent (used), Superb condition, currently part of line in production with robotic top load machine picking cereal bars which are then loaded into this machine. Videos of line are available upon request. Can be seen running until near end of August 2023 Fgjdpfx Adjnmv Rae Nei

Condition: like new (used), Year of construction: 2018, operating hours: 50 h, functionality: fully functional, Heavy Duty Elevating Crossrail Ram Type CNC Vertical Boring and Turning Machine with Hardened & Ground Box Guideways CAPACITY Maximum Turning Diameter - Ø 1,600mm Maximum Turning Height - 1,400mm Maximum Torque - 17,885 Nm Maximum Cutting Force - 3,000 kgf Maximum Workpiece Weight - 8,000 kg TABLE Table Diameter - Ø 1,250 mm Table Speed - 0.9 ~ 360 RPM Table Speed Range - Automatic 2 Step RAM HEAD Tool Size - 32 mm² Spindle Taper - ISO 7/24 #50 Ram Cross Section - 220mm² TRAVEL AND FEEDRATE X-Axis Travel (Saddle Horizontal) - 1,060mm Z-Axis Travel (Ram Vertical) - 900mm Vertical Travel of Cross Rail - 700mm Maximum X / Z-Axis Cutting Feedrate - 7,500mm / Min X / Z-Axis Rapid Feedrate - 7,500mm / Min Cross Rail Rapid Traverse - 300mm / Min ATC Type of Tool Holder - MAS BT 50 12 Tool Magazine Capacity Maximum Tool weight - 50kg MOTOR Table Motor (Cont. / 30 min) - AC 37.0 / 45.0 kW X / Z-Axis Servo Motor AC - 7.0 kW POWER SOURCE Input Power Supply - 415V / 50Hz / 3PH Power Capacity - 80 kVA DIMENSIONS AND WEIGHT Height - 5,290 mm External Width (With Chip Conveyor) - 6,760mm External Depth - 4,565m Weight - 25,800 kg STANDARD SUPPLIED MACHINE FEATURES Fanuc 32i-A Control System Fjdsuu Rybjpfx Ad Njgi Table, Servo Drives And Motors 4 Jaw Independent Chuck Automatic Tool Change System Lubrication Oil Cooler Hydraulic Power Unit Automatic Lubrication System For Guides Coolant System And Wash Gun Foundation Bolts And Nuts Tool Box Through Tool Coolant Operator And Programmer Manuals Splash Guard And Safety Guard Rail X-Axis Slideway Protect Steel Cover Work Light Patrol Lamp (Red, Yellow And Green) NC Power Off Chip Pan Levelling Blocks Electrical And Mechanical Manuals FANUC 32I CNC

Year of construction: 2016, condition: excellent (used), functionality: fully functional, Make: Reifenhauser Model: Mirex-MT-V 1-RZE 120-1800 Year: 2016 Condition: Excellent Use: PET / PP / PS Foil or Sheet PET: Thickness Range: 0.25 - 2.2mm Output: 2,000 kg/h Max Sheet Width: 1600mm Extruder: RZE 120mm Electrical Supply: 3 x 480V 60Hz with N Calendar Roll Width: 1800mm Calendar Roll Diameters: 450 / 700 / 700mm Silicon Bath Max Sheet Width: 1600mm Silicon Bath Sheet Thickness Range: 0.15 - 1.5mm 4 Position Winder WOB 1800 for double web winding included. All details are subject to change and/or errors. All equipment is subject to availability and/or prior sale. Fodpevbcbusfx Ad Nogi