Used Blister for sale (42)

Condition: used, Year of construction: 2002, functionality: limited functionality, machine/vehicle number: 2123, FAMAR AP60, including one size part for tablets and one size part blister PVC-ALU, 10 cells, for capsules size “0” Tsdpfx Aev S Eurjg Def Sold as seen

Condition: ready for operation (used), Year of construction: 2000, A Uhlmann blister machine including new Scanware for fill-good inspection Spectra CL is available. Index length: 160mm, max. forming capacity: 80cycles/min, packaging capacity: 240blisters/min, forming film materials: plastics/aluminium, lidding film materials: composite films/aluminium, max. forming depth: 25mm, max. film width: 300mm, film core diameter: 76mm. Machine dimensions X/Y/Z: approx. 3500mm/2000mm/2200mm, weight: approx. 6500kg. Including a Spectra CL fill-good inspection, year of manufacture: 2023, and a defective HAPA 216 blister printer. Dokumentation vorhanden. An on-site inspection is possible. Tjdpfjxyk Uvox Ag Dsf

Condition: as good as new (ex-display), operating hours: 50 h, Uhlmann thermoform packaging system UPS 4 ETX for processing PVC forming film and aluminum lidding film Basic machine in modular technology and balcony construction, with 12 modules: - Molding film holder with 2 pneumatic clamping shafts for core diameter 76 mm, max. roll diameter 800 mm - Cutting and gluing table for shaped film - Shaped film unwinding, clocked - 3-zone contact heating: - 6 heating circuits, individually adjustable - Simultaneous heating of min. 3 feeds - Heating plates during machine stop automatic opening - Forming station with 4-column lifting table guide - Filling section, length 1,360 mm - Safety flap on the filling section Cover film unwinding on operating side with pneumatic expansion shaft for core diameter 76 mm, max. roll diameter 300 mm - Plate sealing station with 4 columns lifting table guide: - Integrated overload protection - Automatic lifting of the upper sealing sealing tool when the machine stops - Free module for the installation of an additional station - Clamping gripper feed - Punching station with blister lowering - Waste cutter with integrated motorized transport of the punching grid - Smoothing device - ET/DT perforating station - Monitoring of the compressed air supply with machine stop when the minimum the minimum value - Visio Scan - Electrically interlocked safety doors - Quick format change due to - plug-in format parts - Plug-in connections for cooling water supply - Main drive with frequency-controlled three-phase motor geared motor - Switch cabinet at the rear of the machine, swivel-mounted Paccontrol operating control - 10.4" TFT color display with 640x480 pixel resolution - Processor 68C030 - OS9 2.9 operating system - 2 MB SRAM, 2 MB Flash, 16 MB DRAM - SRAM card reader - IBM standard membrane keyboard - Centronics interface for external printer - PS2 interface for external keyboard - VGA interface for external monitor - Serial interface for diagnostic purposes - Arcnet interface - 8 serial interfaces for connecting devices Integrated shift register ISR Rejection of individual blister rows, e.g. overheated film in the heating station, products in the sealing station, etc. Machine control: Memory-programmable sequence control in modular design: - B&R - PLC control - Bus system with modules for CPU, inputs, outputs, temperature controller, cam controller, etc. - External program memory Technical data UPS 4 ETX: - Number of cycles: - ET range: min./max. : 15/ 50 T/min. depending on film quality, feed and format design - Format range: min./max. feed in filling area : 64/226 mm min./max. film width : 100/300 mm min./max. punching width : 28/284 mm max. drawing depth : 12 mm Tsdpfxstndpzs Ag Def - Compressed air: - Inlet pressure: approx. 6 - 8 bar 4 Simtap feeders

Condition: used, Year of construction: 2022, functionality: fully functional, film width: 165 mm, roll diameter: 700 mm, Packaging line, for low to medium speed segment. Single-track blister machine with rotary sealing and a continuous motion cartoner. The modular line makes it ready to be connected to different track & trace systems, or end of line packaging solutions. PRODUCTION Output blisters/minute: 300 max. Output cartons/minute: 10 – 300 (min-max) Tsdpfjxzuhvex Ag Djf Forming cycles/minute: 100 max. Die-cutting cycles/minute: 300 max. Foil width max: 165 mm Forming area max: 190 × 150 mm Die-cutting area max: 100 × 150 mm Forming depth max: 12 mm Forming material reel diameter max: 700 mm Lidding foil reel diameter max: 300 mm Carton dimensions (A × B × C): 35 × 15 × 65 to 105 × 100 × 160 mm (min-max) DIMENSIONS Machine dimensions (L × W × H): 8,270 × 1,890 × 2,230 mm Weight (approx): 5,300 kg

Condition: good (used), Production: alloyed Tip: 4 sec Tjdeuhn Dcepfx Ag Djf Turntable

Condition: new, Year of construction: 2025, Economical blister machine with a quick format change unit for more flexibility. Universal feeder for handling of almost all types such as capsules, flat tablets, oval tablets, capsule tablets, triangular tablets or other various shapes. Adjustable sealing pressure for different product requirements. The machine is additionally equipped with a film waste material trimming cutting device which allows production runs of approximately 90 minutes. Integrated camera inspection systems (pinhole detector, BASLER color camera) automatically eject defective blisters and ensure the quality of the blister packs. Two holding devices for two blister film rolls and the integrated blister film splicer increase efficiency during material changeover. The length of the final blister is adjustable by software. Including water chiller system, 1 x aluminum format set with dedicated feeder, aluminum/PVC format set with brush feeder, print mark detection unit. - Specifications: sealing principle: platen sealing; max. format area (index x width): 245 x 152 mm; max. forming depth: 12 mm; processable forming materials: Al, Al/PVC; max. speed of the machine in neutral: 20 cycles/minute; Al/Al 40 cycles/min, Al/PVC 70 cycles/min (corresponds with 57x80 mm Al/PVC blister: 280 blister/min); number of lanes: customized; max. roll diameter forming film: 600 mm; power consumption: 9.6kW; machine dimensions: 4800×740×1700mm; weight: 2200kg. Tedpov Nkvcefx Ag Djf Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Year of construction: 2002, condition: used, functionality: fully functional, machine/vehicle number: EAPPS, User-friendly cold sealing machine for card to card Economical for small to medium batches Single station shuttle type medical and retail packaging sealer Tedpfxswntl Nj Ag Dsf CE certified Shorter cycle times than heat sealing Energy efficient as no heat is required Maintenance free Quick set-up and changeover Low tooling costs Immediately available, almost new machine!

Condition: ready for operation (used), Year of construction: 2003, A Klöckner blister packaging machine and cartoner are available. 1) Blister machine Klöckner CP200, year of manufacture: 2003, output: 50/min, formats X/Y min./max.: 50mm x 22mm/156mm x 115mm, max. draw depth: 12mm, film width range: 100mm-168mm, forming film diameter: 450mm, lidding film diameter: 240mm. Documentation available. 2) Cardboard packaging machine Klöckner P1500, year of construction: 2003, packaging capacity: 200/min, formats X/Y/Z min./max.: 20mm x 15mm x 50mm/250mm x 115mm x 190mm, machine dimensions X/Y/Z: approx. 5200mm/1500mm/1900mm, weight: approx. 4000kg, control: Siemens S7 PLC. Documentation available. Some parts of the machines have been dismantled. Todpeucfw Aofx Ag Def

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, Available from Q1 2026 Technical data Blister module (B 1770) Max. output 700 blisters/min Application area: solid products Max. format range [feed x width] 200 x 284 mm Cartoning module (C 2305/C 2504) Max. output 300 or 500 folding boxes/min. Application area: blisters Tsdsv D Ipiopfx Ag Dof Max. folding box size [A x W x H] 105 x 105 x 155 mm or 80 x 90 x 155 mm For details, see PDF

Year of construction: 2018, condition: excellent (used), functionality: fully functional, Used heat-sealing machine for medical blister, make: MEDIPACKER, model: TS 3535, Serial number: 635-231; MFG: September 2018, dimensions: Width 470 mm X Depth with guide bars 710 mm X Height 660 mm, net weight 112 kg without tools, seal surface 350 x 350 mm Max., depth of Blister 105 mm; Tedpfx Agevubapo Dof The used heat-sealing machine is sold with the mould (please check the pictures); The filled blister packs are placed on the support plate. The die-cut lid is placed on the blister pack; positioning is using pins. The carriage is pushed to its rearmost stop. The sealing cycle is initiated automatically. After the sealing cycle, the carriage is pulled back again. With its compact and durable design, this table model has been specially developed for the medical industry and use in clean room areas. The three process parameters— Time, Pressure, and Temperature—are regulated to the tightest tolerances, resulting in a high-quality package. Rust-free INOX construction with aluminium parts anodized. The sealing temperature is digitally programmable up to max. 190 °C feedback control accuracy at 130 °C = ± 1.0 °C measured at the hotplate PID feedback control system. The sealing force is programmable via touch screen from 6 kN to 36 kN, adjustable in 1 kN steps, repetition accuracy within 0.5 kN. The sealing time is programmable from approximately 1.0 to 9.9 seconds. The program is adjustable by 0.1 seconds each. The repetition accuracy is better than 0.15s. Output approx. 12 Cycles/Minute, without placing and removal of trays compressed air connection 0,6 Mpa/6 bar, tube outside 12 mm, tube length 3 m. The compressed air must be supplied filtered and dry. The consumption of compressed air per cycle at 16,5 NL to 0,5 MPa; The electrical connection is 230 VPNE 50/60 Hz, max. 2300 VA; 3 x 400 V, 50 Hz, max. 4100 VA Sealing lid from a film roll For Romanian companies, finance leasing or credit in instalments is possible, with a minimum of 50% down payment. Price 7,500 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare

Condition: good (used), Manufacture: ALLOYD Tedeuhn Dijpfx Ag Djf Tip: 4 seec Turntable

Condition: ready for operation (used), Year of construction: 2009, Moulding depth: 12mmm, working area: 100x70mm, max. coil diameter: 250mm, speed: 1-30 cycles/min, with documentation, the machine was never used. Tjdon R Nhfopfx Ag Dsf

Condition: defective spare-parts repository (used), Manufacturer: Illig Type: HSA 50C Tjdpfsuk Dwfox Ag Dof The machine is incomplete and not operational! For spare parts only!!

Condition: ready for operation (used), Table diameter: 1000mm, tool height: 80mm, sealing pressure: 1.6t, number of stations: 4, connected load: 3kW, including tools, machine was hardly used. Tedpfx Aeif Elgog Dsf

Condition: reconditioned (used), > Top heating with pilot radiator control > Single radiators of the top heating > 2 cooling fans D05 > Automatic preblow and demoulding > Documentation and plans in German > Max. forming area 1210 x 500 > Longitudinal and cross cutter with 6 quick-change squeezing knives > Euro hole punching device (can be retrofitted at extra charge) > completely overhauled Tsdpfx Agefua Hue Dsf

Condition: as good as new (ex-display), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 801657, type of input current: three-phase, total height: 1,900 mm, input voltage: 380 V, total width: 1,150 mm, total length: 4,250 mm, overall weight: 1,500 kg, working height: 900 mm, compressed air connection: 6 bar, warranty duration: 6 months, air demand: 0.6 m³/h, power: 1.5 kW (2.04 HP), Equipment: documentation/manual, Indexed case packer ZHJ-150 Display machine/ trade fair machine Multifunctional cartoning machine ZHJ-150 The ZHJ-150 automatic cartoning machine is suitable for packaging aluminum-PVC blisters, round bottles and special bottles, molded bottles and similar products. Instruction leaflets can be folded automatically, cartons erected, products fed in and the cartons closed again (offset plug-in closure). The cartons can be embossed. This machine has a PLC control system and each station is monitored by photoelectric sensors. If a problem is detected during operation, the machine stops automatically and indicates the fault. This machine can run as a single machine and can also be connected to a blister packaging machine and other pre-machines. The machine can be inspected at any time at our premises in 73084 Salach/Germany and tested with your products. Depending on the product, it is also possible to order a new machine from us. We also have various blister and cartoning machines to offer. Technical data: max. speed = up to 130 cartons/min Carton size = width (20-90mm) x length (50-190mm) x height (15-60mm) Leaflet size unfolded = Max.240x180mm (LxW) / Min.115x100mm (LxW) Leaflet folder = up to 3 paper folds possible Blister feeder magazine = 100cm long / number of blisters/cartons to be packed selectable Bottle feeder = screw conveyor Leaflet control in folding box available Automatic ejection of bad packs Todstib Uyjpfx Ag Dsf

Year of construction: 1999, condition: reconditioned (used), functionality: fully functional, A used and overhauled blister machine, model UPS1030 ET (94/125) Technical data - Format range Feed width maximum 142 x 255 mm Form depth maximum 10 mm - Output at least 15 cycles/minute - Output maximum 70 cycles/minute PVC - Output maximum 50 cycles/minute ALU Includes: - Form film roll carrier with two tension shafts, for maximum roll diameter 800mm, electromechanically foldable, including cutting and gluing table, painted neutral grey - Continuous conveyance of the form material with a contactless loop - Contact heating with 6 individually controlled heating zones (3 zones per plate) - Forming station prepared for PVC or aluminum form film with 4-column guide system - electr. Preparation for pore and crack detection (Visio-Scan) - Clamping pliers for securing the forming film in the forming station when the machine stops - Servo-controlled feed after the forming station, film shrinkage compensation guaranteed - Contact cooling with servo-controlled feed - Cooling water connection for upper and lower forming tool and lower sealing tool - Deflection with compensation pendulum - Filling section, approx. 1900mm with slanted brush and safety flap - Electrical preparation SimTap 2.i and brush feed - Sealing station for plate sealing and toggle lever drive, with 4 column guide (reinforced version with tuning domes) - Overload protection in the sealing station Tjdpfx Agjr Ii R Ue Def - Upper sealing plate automatically retracts when the machine stops - Cover film holder mounted on the back of the machine with 2 pneumatic tension shafts core diameter 76mm - Deflection shoulder for cover film with pressure presence control - Stretching station for cover film with touch probe controlled Stretching (print mark on the fly) - Contact cooling station after the sealing station - Feed before the punching station - Embossing station - Perforating station - Punching station, adjustable, including blister lowering - Waste cutter with integrated feed for immediate cutting from the waste grid - Compressed air monitoring - Sliding door panel, protective doors electrically switched for emergency stop when actuated 2-channel, made of plexiglass, hinged hood in the transfer area - Switch cabinet hinged on the back of the machine Mains 400/230 volts, 3/N/PE 50 Hz with neutral conductor and separate earthing. The stations were completely overhauled and the discontinued parts were replaced at the time of the overhaul. - Schneider PacDrive3 system with Pac2Touch - Machine paintwork RAL 9007 - Linear translator with: o Lowering unit in the punching station o Good blister outlet below the punch with slide rails o Individual vacuum translator o Individual ejection with ejection counter control o Collection belt with separate drive o Transfer belt o Good blister clearer when the following machine is at a standstill - CE conformity with declaration of conformity - Two sets of operating manuals

Year of construction: 2021, condition: new, Derryglan Ltd - Bagging Systems offer exceptionally reliable, cost-effective bagging solutions. We offer a range of semi-automatic & automated bagging machines for many applications. We offer a full range of accessories to suit your requirements and application. With body material available in painted mild steel or stainless steel. Todpfx Agegq N Axs Djf The T-1000 Advanced Poly-Bagger is our 'top-of-the-line bagger'. It is no wonder the T-1000 is also our best-selling machine! Designed for long or short runs, the T-1000 has the capability of cycling over 60 bags per minute, faster than any operator could manually feed. The T-1000 is also fast enough to keep up with automatic infeed equipment including vibratory bowl counters, scales and infeed conveyors. The T-1000 Advanced Poly-Bagger is also designed to run inline with punch/stamp presses, injection mould machines, blister machines and other continuous feed manufacturing equipment for inline bagging.

Year of construction: 2005, operating hours: 51,230 h, condition: like new (used), functionality: fully functional, machine/vehicle number: C130 86/357, The machine is currently being completely overhauled. All mechanical wear parts and repair parts are being replaced. The complete electronics will be brought up to date. Available from Q2 2025, the price is approx. 50% of a new machine Secure this unique opportunity. Contact us, we can also integrate your specific requirements. Technical data C130 Output: max 120 cartons Tjdpfetpazisx Ag Djf Pitch: 5" Carton: max.100x85x150mm No. of Blister max.10 Blister stack height: max. 80mm Type of closure: tuck-in Code Reader:LEATUS 6012 with Scanner 2 Flap Discharge Conveyor GuK: Leaflet Folder

Condition: used, Year of construction: 1971, Documented modifications / upgrades: Todpfx Agoxf Ap Ne Def Year Modification / Upgrade 1971 Installation of four-roll calender 18" × 54" (Comerio) 1971 Safety enhancements for CTI – SQ 1986 Manual gauge monitoring system 1990 Width measuring unit 1993 Upgrade to eliminate internal blistering 1994 Modification of calender for single turn 2001 Upgrade MMI-Gum-Calender Y2000 2009 Cassette winders (2) incl. control cabinets 2009 Material width measuring system (SQ1) 2010 Overhaul gum calender (SQ-Cal.) 2012 Control system adaptation feed extruder SQ-calender 2012 Mechanical upgrade SQ-calender 2012 Gauge measurement system SQ-calender 2013 Overhaul of cooling line for gum calender (SQ-Cal.) 2014 Optimization of spool winder at SQ-calender 2018 New calender rolls Control system: Various modernizations (MMI 2001, control upgrade 2012) Technical data: Roll diameter 18", roll length 54" Maintenance / condition: Regular overhauls and modernizations documented 1971–2018 Accessories / options: Cassette winders, width measuring unit, cooling line, spool winder, gauge & width measuring systems

Condition: reconditioned (used), functionality: fully functional, Technical data: • 4-station rotary table • Max. sealing area 350 x 250 • Max. blister depth 70 – 100 mm depending on product type • Sealing force 12,800 N • Sealing heater power 1.75 kW • Carton feeder • Package ejector • Carton forming unit • Cable with CEE 16A plug • Weight approx. 750 kg Machine available in all variants b, b-2, b-3, b-4. Tedpjfua Dcofx Ag Djf

Condition: used, Year of construction: 1990, Name: Used packaging machine (thermoforming system) Manufacturer: Adolf Illig Type: SB 53C - DIN Year built: 1990 Driving force: 1,24 kW Dimensions: L 1.600 x W 1.135 x H 2.710 mm Todpfx Asxm Sa Heg Dsf Empty weight: 500 kg Technical doc.: Yes Message: Heating capacity: 4.5 kW (15 ceramic surface heaters) Vacuum system: Max. vacuum level 0.95 kp/cm2 Formats: Forming area: 405×500 mm Carton size: 400×495 mm Film width: 445 mm Positive drawing depth: 150 mm Negative drawing depth: 150 mm Packaging height: 150 mm Film roll diameter: 400 mm (blister) Film roll diameter: 350 mm (skin) Film roll core diameter: 70 mm Condition: Second hand Price: By request

Year of construction: 1987, condition: good (used), With a blister! Todjgxqfcspfx Ag Def Product: RUEZ Type: SFWW2 / 306DAU Year of production: 1987 Metal chain width: 200 mm Distance guide lanes: approx. 300 mm Chip outlet length 700/1300 mm Insertion length: approx. 1000 mm Insertion height 260 mm Total length: 3000 mm Transport height - ejection height: 800 mm Belt speed 26 mm / sec. = 1.6 m / min Engine power: 0.25 kW Mains connection was 400, 50 Hz Enclosure size: H x W x D; 1900 x 900 x 1300 mm Weight 300 kg Set of 2 pcs.

Condition: reconditioned (used), functionality: fully functional, Continuous cartoner for blister packaging. Single-lane, infeed capacity with vacuum belt 400 BL/min. Tjder Ny H Hjpfx Ag Dof GuK stacking folder, output max. 250 FS/min.

Year of construction: 1990, condition: good (used), With a blister! Product: RUEZ Type: SFWW2 / DAS406 Year of production: 1990 Metal chain width: 330 mm Distance guide lanes: approx. 300 mm Chip outlet length 2000/1000 mm Insertion height 260 mm Total length: 3000 mm Transport height - ejection height: 1100 mm Tedpegxqgzefx Ag Dof