3
Mecal MC 304 Atlas 4 Axis Machining Centre, year 2007
Machine still working in UK
B0geyqpok
8 station tool changer,
7
Cutter diameter: 250 mm Pneumatic workpiece clamp Manual feed Weight: approx. 160 kg
Cbkmbfi9in
3
Notching machine
Qkqta7nja
-automatic hydropneumatic milling feed
-for milling cutters max.: Ø 250 mm
Italmac spring
is a profile machining center for 3 meter long parts with 4 axes.
Udhfeuyj
S3 X travel distance 3000mm
Workpiece dimensions at
3 axis machining 220x230x3,000 mm
Workpiece dimension at
4 axis machining 150x230x3,000 mm
4
Fully working SBZ 130
One head is broken, but all tasked came be achieved using the others.
Dy9asi
Discover more used machines
7
elumatic KF 178
3-spindle copy router
Three copy milling units
Separate operation of the horizontal and vertical milling heads
Cbydogm8o0
Clamping of the workpiece upwards to the contact surface of the lock, thus eliminating the need to readjust the machine for the backset for profiles of different heights
Easy tool change due to "spindle lock
Flexible stop system with support rollers
6
Offer 13150
Technical data:
- to cut out lock and PZ - holes , etc.
- operation by two-hand lever
- material clamping by pneumatic clamping cylinder
- working range
Mmbqr
- x (crosswise) 280 mm
- y (longitudinal) 125 mm
- z (vertical) 125 mm
- max. profile width 125 mm
- max. clamping width 165 mm
- spindle speeds horizontal milling shafts each approx. 9000 rpm
- spindle speed vertical milling shaft approx. 12000 rpm
- tool cooling / spraying device with spraying nozz...
Max. Machining length: 2,600 mm Y-axis travel: 315 mm Z-axis travel: 230 mm Milling spindle speed continuously adjustable between 2,800 and 12,000 revolutions per minute Rotatable support table between 0 ° and 180 °, thus 3-sided processing in one clamping X and Y-axis CNC controlled, Z-axis can be lowered continuously by motor 4 pneumatic material clamps Manual tool change Minimum quantity spraying device USB connection operation manual Accessories according to photo
Glx3dfd
3
Notching machine
Hhufsw3je
-automatic hydropneumatic milling feed
-Cutter max.: Ø 250 mm
7
Visit us at the Fensterbau Frontale
P2kgn
CNC machining center with 5 controlled axes designed for machining for milling, drilling, tapping and notching of long parts and short parts in aluminum, PVC and steel.
There are 3 different models: 4 m, 7 m and 9 m, with 2 different working methods: Single zone machining along the entire length of the machine or tandem operation with two independent zones.
The milling spindle with 8,5 KW power in S1 with HSK-F63 tool holder allows also the machining of...
5
revolution per minute: 1390 U/min
capacity: 0,75 kW
weight of the machine approx.: 360 kg
2 pcs drilling and milling spindle with electric cabinet.
Gfu370h
On sale as is.
6
elumatic AF 223 end milling machine
For milling transom and door profiles made of aluminum and plastic
Automatic work sequence
Stepless table height adjustment
Material stop can be swivelled to the right and left up to 60°. Notching up to 30° (acute angles left and right). Locking at 90° with index pin
Iugdansx
Two mounting positions for material stop
Flexible due to horizontal and vertical pneumatic material clamping
8
Offer 22260
Technical data:
- Operation by two-hand lever
- Material clamping by pneumatic clamping cylinder
- Workpiece width / clamping range B 115 x 100 mm
- Milling range top after stop/copying template. B 340 x 100 mm
- Stroke top 110 mm
- Milling range bottom after stop/copying template. B 240 x 90 mm
- Stroke bottom front / rear 95 / 45 mm
- spindle speed 12000 rpm
- dosing spraying device
- material support left + right 1500 mm each
- Air consumption per working cycle
Cb...
7
Rotatable support table between 0 ° and 180 °, thus 3-sided processing in one clamping 4 pneumatically controllable copier pens 12,000 r.p.m. Pneumatic material clamping Minimum quantity spraying device Profile width: 30-120 mm Profile height: 50-100 mm Rod length: 490 - 3,000 mm Weight: approx. 350 kg
Flbiixhbg
4
Gear cutters, module cutters, tooth form cutters, module milling heads
Qlykwgtkl
-1x milling cutter: Ø 52/170 mm
-Diameter: 22 mm
-Weight: 2 kg
PERTICI P524 / P527
Machining center
S9ue8p
Special features:
CNC machining center with 5 controlled axes, designed for machining for milling,drilling, tapping, sawing and notching of profil bars, single parts or even for large profil cross-sections in aluminum, PVC, light alloys and steel.
Technical data:
Control unit
Pertici P CAM
Travel X
5,150 mm
Travel X Option
7.000 mm
Travel Y
1,170 mm
Travel Z
565 mm
Spindle speed
24.000 rpm
Tool holder
HSK F63
Drive power
18 kW
Axes
5
Tool places
10
Tool ...
5
Elumatec copy router AS70
Application description:
- Versatile use in aluminum and plastic profile machining.
- Precise milling with low effort, simple - two-lever operation
- Copy milling at a ratio of 1:1, thus transferring the milling pattern from a template to the profile
- production of own templates possible
(copying the template onto a blank)
- Copy milling also possible according to stops (only rectangular milling patterns)
- Adjustable in a few steps
- Pneumatic material clamping device...
8
Used end milling machine
Manufacturer: ROTOX
Type: SAF 163
Ma. No. 163093
year 1978
Power 2,2 kW
Dvkyokb
Item location: 58730 Fröndenberg/Ruhr
The machine can be visited with pleasure.
We will gladly send you more photos by e-mail.
A forklift / crane for loading is available.
Subject to prior sale.
There is the possibility to examine the items for sale, on site expertly. Specific questions should be clarified in advance. The information, such as technical data, dimensions, year of manufactu...
5
Visit us at the Fensterbau Frontale
G3v2oi0p
CNC machining center with 4 controlled axes designed for machining drilling and milling on profile bars or single parts made of aluminum, PVC, light alloys and steel with a thickness of 2 mm.
The working area in the P104 version with a pneumatic zero stop allows the machining of profiles up to 3.2 m long. (other models on request).
The milling spindle with a power of 5KW, can machine the profile at any angle between 0° and 180° over the entire machin...
6
For aluminum and PVC profiles Max. cutter diameter: 250 mm Max milling length: 250 mm Max. milling depth: 95 mm Max profile height: 115 mm Stroke: 350mm Pneumatic material clamps Manual feed minimum quantity spraying Weight: about 200 kg
B9oihdd3rf
5
Gear milling cutter, module milling cutter, tooth form milling cutter, module milling head
-1x milling cutter from: 650.054.06 A SPAN. < 5 ° EV 4 CO
Fzxdn0h
-Diameter: 22 mm
-Weight: 0.6 kg
5
Max length profiles : 6.1meter - max height : 270mm
Jxfkna
3-sided machining of sash and frame profile bars in one clamping for e.g. profile cylinder, handle hole, lock case.
Machine complete with stop left and right, operating instructions for the machine German/ English (operating instructions also possible in other languages)
Description:
B99vhiw08f
- Equipped with 4 copying bolts for flexible and easy use of the template system
- Convenient insertion of the profile bar without disturbing milling units
Manual profile bar turning device for 3-sided ...
5
- single spindle
- for machining: complete lock cut-outs such as profile cylinder, handle hole, lock case as well as water slots on aluminum and PVC hollow profiles as well as for milling off edges, webs and ribs on these profiles
- Machining: of steel hollow profiles also possible
- Swiveling sliding table: this allows the bar to be machined completely without having to reclamp it
- Milling slide: is moved by hand
- Machine length (mm): approx. 4000
- machine width (mm): approx. 850
- machine h...
8
shipping EU ~300euro
Jxvupi
6
Pneumatic workpiece clamps Manual feed Weight: approx. 160 kg
Ffapnnz
5
Copy milling machine, copy milling machine, hand lever milling machine, hand lever milling machine
-Copy router: Wegoma SK6
-Copy router: swiveling
-with support rail length: 1910 mm
Bjszpd3r
-Motor: 220 V 1.4 kW
-Spindle speed: 22000 rpm
-Dimensions: 500/460/H1530 mm
-Weight: 46.5 kg
6
Rotox copy router, used, ready for operation
type: 457
year of construction: 1990
air pressure: max 8 bar
Bqaqv9qd
Dietz engine
rod processing center
Manufacturer: Elumatec
Type: SBZ – 130 7.20 m
Year of construction: 2009
Auto clamp positioning
2 pcs. Double angle milling head BT 30 DL rear/front; i=1:2.8; HE 16
High-speed spindle cpl. I=1:3.8 to 15000 l/min
4 pcs. Collet chuck ER 32
Collet 11-12 mm ER 32 double slotted
Collet chuck set 3-20 mm ER 32 double slotted
Collet 7-8 mm ER 32 double slotted
Collet 7.0 – 8.0 mm ER 16 double slotted
Collet set 1-10 mm ER 16
Cutter set for SBZ 130
Disc milling cutter...
8
Graule AKF 6/250 end milling machine
Pwubj3
for aluminum and plastic used
z. e.g. for profiles from Schüco Heroal
cutter 250 mm diameter
year of construction 1992
6
The CNC machining center with 4 controlled axes is designed for machining for milling, drilling, tapping and end milling of long parts and short parts in aluminum, PVC, and steel. There are 3 different models: 4 m, 7 m and 9 m, with 2 different working methods:
Single-zone machining along the entire length of the machine or shuttle operation with two independent zones.
The milling spindle with 8.5 KW power in S1 with HSK-F63 tool holder, allows also the machining of challenging applications in t...
5
Cutter diameter 250 mm Pneumatic workpiece clamp Manual feed Weight: approx. 160 kg
B9rlkltwrw
5
Copy milling machine, copy milling machine, hand lever milling machine, hand lever milling machine
-For machining: of aluminum and steel profiles
-with 1 vertical and 1 horizontal milling motor
-per motor: 0.74 kW 12,000 rpm
-Installation dimensions 2800/1100/H1630 mm
-ransport dimensions 800/1200/H1630 mm
Mvvosw
-Weight: 270 kg
14
The ideal machine for economical door manufacturing
For routing lock cylinders and round rosettes (safety locks) in profile systems or multi-chamber profiles with large dimensional depths
Three copy routing units which operate completely independently
Separate control of the horizontal and vertical router heads
The workpiece is clamped upwards towards the contact surface of the lock, which eliminates the need for readjustment of the machine for the backset when working with profiles of different...
5
TK 447 N , CNC vertical machining centre with 4 controlled axes, C axis +90° to -90°. Possibility of working in pendulum, for a total length of 6200 mm. In one zone the machine works, while the operator can access the other zone to replace the workpiece. It is used to eliminate downtime and increase productivity.
Cav0utd8os
7
GRAULE AKF 6/250
Fräser-Ø 250 mm
shipping EU ~300euro
Cbk2wxt2za
4
Cutter diameter 250 mm Pneumatic workpiece clamp Manual feed Weight: approx. 160 kg
B90xmvqlqs
2
2 fraes motors from above, 1 fraes motor from below
Speed: 17200 rpm
Drive power each: 0,5 kW
D0p30m9ta
electr. connection: 220 V
space requirement incl. workpiece supports: 1650 x 850 x 1500 mm
weight: approx. 200 kg
5-axis CNC machining center for processing aluminum, steel, light metals and PVC. Bolero 5 has a solid machine bed.
The machining spindle is an electrospindle 17 kW (S6) with HKS 63F taper.
Gyozrk
The maximum speed is 24,000 rpm, with regulation by a frequency converter. Bolero 5 has an automatic tool change system with a magazine with 12 places. The working area is equipped with 8 motorized vices with automatic positioning, controlled by the CN. The traverse range of the X axis is 7,000 mm (opt...
15
For sale is a TEKNA TK803/4 CNC aluminum profile milling and cutting machine.
- including automatic feeding.
- for aluminum profiles
- max. 250kg workpieces
- max. 7000mm workpiece length
- Y=150mm / Z=190mm
- total of 8 aggregates for milling, drilling, cutting (4-sided machining of the profile)
B8z0n2v39n
- sawing from -45° to +45° / diameter saw blade 600mm
- CN6 numerical control with Windows PC
- Cutting list optimization
2
Aluminum single spindle copy router make ELU type AS 70
make # 70425, year of manufacture 1983
Technical data:
B3qomrjnmw
Milling length 250 mm
milling width 100 mm
largest clampable profile width 170 mm
largest clampable profile height 100 (135) mm
milling spindle speed approx. 12000 rpm.
collet diameter 8,0 mm
drive power 740 W
power supply 380 V / 50 Hz
Compressed air f. Clamping and spraying 150 l/min
at 5 - 8 atü
outer dimensions 720 x 650 x 1440 mm
weight approx. 100 kg
used, as on stock
13
Electrical connection 230/400 V, 3~, 50 Hz
Compressed air connection 7 bar
Shipping EU 300euro
Hnr9okqqa
10
3-sided machining in one setting Speed: 12,000 revolutions per minute 2 pneumatic tracers below, 2 tracers above Pneumatic material clamping Minimum quantity spray device Milling area vertical (top): 330 x 130 mm Milling area horizontally (from the front or rear): 220 x 95 mm Stroke: 110mm With side stops (dismantled) Weight: about 350 kg
Cav8ryrzlw
