Used Blister Packaging Machine for sale (71,621)

Year of construction: 2002, condition: used, functionality: unexamined, machine/vehicle number: 2123, TECNOMACO ITALIA / FAMAR AP60 Blister Packaging Machine – Year 2002 TECNOMACO ITALIA S.r.l. – FAMAR AP60 Italian Blister Packaging Machine Year: 2002 Professional industrial blister packaging machine designed for the packing of tablets and capsules in PVC/ALU blister packs. The machine is supplied with: -1 size part for tablets -1 size part for PVC/ALU blister packs, Configuration for 10-cell blister packs, Tooling suitable for capsules size “0” -Blister camera control system which costed 12200 eur in 2018 ) for automatic product inspection and verification inside the blister packs. Camera system installed in a dedicated stainless-steel protective enclosure mounted directly on the blistering machine Stainless-steel construction suitable for pharmaceutical and food-supplement production environments.The integrated camera control is designed to perform a product presence and blister inspection check, helping identify missing, incorrectly positioned, or potentially defective products before the blister packs proceed further in the packaging process. The FAMAR AP60 is a robust Italian-built blister packaging solution suitable for pharmaceutical, nutraceutical and food-supplement production, offering a compact and professional solution for PVC/ALU blister packing. Hodpfx Aozvycnsdweu Manufacturer: TECNOMACO ITALIA S.r.l. / FAMAR Model: AP60 Country of manufacture: Italy Year: 2002 Blister format included: PVC/ALU, 10 cells Capsule tooling included: Size “0” Additional tooling: One size part for tablets Inspection system: Blister camera control with stainless-steel protective housing Condition: Used industrial equipment. Sold as seen.

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, machine/vehicle number: 616, type of input current: AC, input voltage: 240 V, compressed air connection: 6 bar, film width: 480 mm, input current: 16 A, For sale is an ILLIG HSA 50 C blister machine, manufactured in 1991. This is a high-performance, continuous-flow blister sealing machine with card feeder, suitable for film thicknesses of 150 µm to 400 µm (possibly higher, but not personally tested). The entire line is offered for sale (see pictures). Speed: 1–9 cycles/min with 4-up tooling. Example: fragrance dispenser, 4 units per blister tray = 2000 blisters/hour. Dimensions: approximately 9m x 1m x 2.25m. Sealing platen size: 57x32cm. The machine was 100% functional until it was dismantled and properly stored in our machine warehouse and was in operation until recently. Inspection of the dismantled system is possible on-site. An identical machine is still in operation on-site. A sample packaging can be installed for a test run to demonstrate the functionality. Location: Czech Republic (10 minutes past the Bavarian/Czech border from Furth im Wald). Hjdpfjy Anifsx Adwou

Year of construction: 2010, condition: excellent (used), functionality: fully functional, 1 x Giemme Thermo Packaging Machinery S.r.l. semi-automatic shrink bundling machine. Manufacturer – Giemme Thermo Packaging Machinery S.r.l. Model – ALTAIR 70 P. Hjdpfjyzxgfjx Adweu Serial number – 001.041.10. Date of manufacture - 2010. Speed – up to 12 packs/minute. Electrical supply – 400 V / 50 hz / 3 phase. Power – 20 kW. Overall dimensions – 3000mm long x 1200mm wide x 2000mm high.

Condition: defective spare-parts repository (used), Manufacturer: Illig Type: HSA 50C The machine is incomplete and not operational! Hodpfsuk Dwfox Adwsu For spare parts only!!

Condition: like new (used), Year of construction: 2016, ANCIMO AC-60 CL AUTOMATIC BUBBLE PACK THERMOFORMING AND SEALING MACHINE Manufacturer: ANCIMO Model: AC-60 CL Year of manufacture: 2016 Condition: Excellent. Very few operating hours. Complete documentation available. GENERAL DESCRIPTION Automatic machine for the production of blister packs through thermoforming, filling, and sealing, designed to work with a wide variety of materials such as PVC, PVDC, polyethylene, aluminum, and laminated materials. The system allows for cavity formation through thermoforming, as well as subsequent sealing with upper materials such as aluminum, cardboard, or plastic film, resulting in a high-quality and attractive finished package. The machine is in excellent condition and has complete technical documentation. TECHNICAL SPECIFICATIONS • Thermoforming area: 400 x 200 mm • Heat sealing area: 400 x 200 mm • Installed power: 21 kW • Electrical power supply: 380 V III + N • Approximate dimensions: 7,400 x 963 x 1,900 mm COMPATIBLE MATERIALS • PVC • PVDC • Polyethylene (PE) • Aluminum • Cardboard • Laminated materials and other thermoformable materials EQUIPMENT INCLUDED • Automatic thermoforming unit • Heat sealing system • Trimming unit for individual blisters • Unwinder / film feeder • Rewinder for collecting trims and waste • Coil handling trolley • Coil loading trolley • Format changeover trolley DOCUMENTATION • Original manuals • CE marking Hodpfx Adjzcftgowsu • Electrical diagrams • Pneumatic diagrams ADVANTAGES • European manufacturing • Year 2016 • Very few operating hours • Excellent overall condition • Wide range of compatible materials • Format changes using a dedicated trolley • Available for immediate inspection

Year of construction: 2022, operating hours: 2,000 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 22015404-1, The blister packaging machine is in very good condition and is fully operational and functional. A test run of the machine and inspection of its operation are possible. The machine has been regularly maintained and serviced. Upon sale, all available additional spare parts and replacement components will be included. In addition to the blister packaging machine, the package also includes the following components that were additionally ordered alongside the basic machine. Camera inspection system for blister monitoring, a machine for secondary packaging of blisters SDZ-100, and a chiller for cooling the film from which the blisters are thermoformed. Hjdpfx Ajyuc Hzjdwsu You can produce blister "0" 120x70x15 and blister "00" 120x70x30. All machines are supplied with the relevant technical documentation and CE certificates. All technical specifications, dimensions, the machine layout, as well as catalogs and instructions can be found in the attached PDF files.

Condition: used, functionality: fully functional, Reportedly very little used IMA model TR 135 medium speed blister packaging machine. - Manufacturer: IMA - Model: TR 135 - Forming capacity: max 90 cycles/min - Cutting capacity: max 230 cycles/min - Control system: Color touch screen - Feeding system: Pre-feeder hopper with capacity 45 litre + bowl with vibrator - Power supply: 400 V, 50 Hz (max power 12 kW, average power 7 kW) - Air supply: 700 Nl/min, 6 - 8.5 bar - Cooling device: Chiller Euro cold ACW-LP 16T Blisters: Hjdpfxsy Slcho Adwsu - Blister: PVC/ALU blisters. - Size range: Width 30 - 88 mm x Lenght 60 - 135 mm x Thickness 3 - 12 mm - Available parts: Possible to supply with IMA A83 horizontal cartoning machine

Condition: used, Year of construction: 2008, functionality: fully functional, O.M.A.R. FANTASY PLUS – PHARMACEUTICAL BLISTER MACHINE For sale: O.M.A.R. / Dott. Bonapace FANTASY PLUS semi-automatic blister machine, used in pharmaceutical production, supplied with extensive original format tooling and comprehensive technical documentation. TECHNICAL DATA Manufacturer: Dott. Bonapace & C. / O.M.A.R., Italy Model: FANTASY PLUS Year: 2007 Voltage: 220/230 V Operating pressure: 9 bar Weight: approx. 125 kg CE compliant APPLICATION Suitable for pharmaceutical R&D, laboratories, clinical batches, stability studies, samples, and small production batches. According to the original documentation, the machine is designed for: - PVC/ALU Oblong - PVC/ALU Round - ALU/ALU Oblong - ALU/ALU Round EXTENSIVE TOOLING A major advantage is the exceptionally large quantity of format tooling included. The package contains numerous forming, sealing, and die-cutting components for different blister configurations, including: - Forming molds and plates - Heated forming/blowing plates - Sealing plates and molds - Cutting dies and counter plates - Centering components - Various format inserts - Coding/embossing accessories - Additional format-specific components Hjdozxc Apspfx Adwsu Different round, oblong/oval, and rectangular cavity configurations are available. All tooling shown in the photos is included. Due to the large quantity of tooling, the exact allocation of every individual component to a complete format set cannot be guaranteed. DOCUMENTATION Comprehensive original documentation in German is included, covering CE documentation, technical data, operation, forming, sealing, die cutting, ALU/ALU processing, maintenance, spare parts, and tooling codification. Original drawings for individual blister formats are also available. CONDITION Very well-maintained used condition from pharmaceutical use. Inspection and demonstration by appointment at CYCRON GmbH in 4226 Breitenbach, Switzerland. Worldwide delivery can be arranged. PRICE: EUR 32,500 net, negotiable CYCRON GmbH Switzerland Subject to prior sale and errors.

Condition: ready for operation (used), Table diameter: 1000mm, tool height: 80mm, sealing pressure: 1.6t, number of stations: 4, connected load: 3kW, including tools, machine was hardly used. Hjdpsif Elgofx Adwou

Condition: good (used), Manufacture: ALLOYD Tip: 4 seec Hjdpfx Adeuhn Diswou Turntable

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, Technical Data Blister Module (B 1770) Max. Output 700 blisters/min Application area Solid products Max. format range [Feed x Width] 200 x 284 mm Cartoning Module (C 2305/C 2504) Max. Output 300 or 500 folding cartons/min Application area Blisters Max. folding carton size [A x B x H] 105 x 105 x 155 mm or 80 x 90 x 155 mm Hedpfx Asv D Ipijdwou See PDF for details.

Year of construction: 2016, operating hours: 40 h, condition: like new (used), functionality: fully functional, 💎 Highlight: Only approximately 60,000 packs (approximately 40 operating hours) processed during the trial run! For sale is an absolutely like-new, high-end thermoforming packaging machine, a MULTIVAC R 245, in the extremely rare and hygienic medical version (Clean Design) (pp. 2, 15). The machine was purchased in 2016 for a medical project and was only used for a few test cycles in the sterile cleanroom. It is in absolute factory condition, both mechanically and visually (pp. 1-2). • Manufacturer: MULTIVAC Sepp Haggenmüller SE & Co. KG (p. 1) • Type: R 245 Medical / Clean Design (pp. 2, 15) • Year of manufacture: End of 2016 (pp. 1, 3) • Condition: Like new, unused (New Old Stock), stored in the cleanroom, dust-free • Operating hours: Only approximately 60,000 individual packs (equivalent to approximately 15 cycles) (p. 14) 📦 Technical data & dimensions • Total footprint (L x W x H): approximately 700 cm x 140 cm x 230 cm (including discharge conveyor) • Frame length, base machine: 5,500 mm (divisible frame for easier transport) (p. 6) • Machine nominal width (bottom film): 355 mm (worldwide standard, easily available) (pp. 6, 23) • Top film width: 342 mm (pp. 2, 23) • Infeed path: Comfortable, knee-free infeed path of 1,125 mm (p. 6) • Power supply: 400 V / 50 Hz / 3 phases (p. 8) Hjdpfxszwgxre Adwsu • ATTENTION: no compressor included! 🛠️ Tool & format data (4-cavity contour tool) The installed original tool provides a highly precise, visually appealing contour packaging (ergonomic oval/drop shape), ideal for premium products (p. 14): • Format layout: 4 lanes side by side / 1 row (pp. 13-14) • Actual cavity inner dimensions per cavity (L x W): 152 mm x 64 mm (pp. 14, 16) • Package outer dimensions (L x W): 185 mm x 82 mm (pp. 14, 23) • Package depth: 19.5 mm (mold plate type 5, directly water-cooled) (pp. 14-15) • Infeed / discharge length: 185 mm (pp. 13-14) ✨ Premium features & expensive optional extras (included!) • Integrated printer: MULTIVAC MR293 HP/TT in-line direct printing system with a fully integrated MULTIVAC TTO 10 thermal transfer printer (300 dpi) for printing logos, batch numbers, and expiration dates directly in the control system (pp. 19-20). • Integrated chiller: Rittal air/water heat exchanger in a stainless steel housing for self-contained tool cooling in a closed circuit (no external water connection required) (pp. 6, 11). • Automated discharge conveyor: High-quality Intralox discharge conveyor (800 mm) with a blue Intralox chain and its own frequency inverter for synchronous package transfer (p. 12). • Scrap film management: Original MULTIVAC RSW 20 edge strip winder with integrated tear-off control and winding drive for clean film disposal (p. 12). • Gas flushing device (MAP): Gas injection bars installed on the tool side for packaging under modified atmosphere are available. • Control system: Modern 12.1" color touchscreen terminal with HMI 2.0 user interface and IPC 06 control (Windows Embedded) (pp. 9-10). • Documentation: Operating manual, spare parts catalog, electrical and pneumatic wiring diagrams in German included in the scope of delivery (pp. 19-20). 💰 Price € 39,900,- net, excluding VAT. • Shipping costs: Available upon request, throughout Europe • Delivery time: Immediately available • Inspection and collection: possible at any time by appointment (Changes and errors in the technical data, information and prices as well as prior sale reserved! See our general terms and conditions, all prices excl. VAT, ex wareh

Condition: used, Year of construction: 2018, Materials for blister packaging: PVC + coated PVC, PETG + PETG, PET GAG + PETGAG, PS + Complex, operating mode: intermittent, max. output: 12cycles/min, forming film width: 180-350mm, max. forming film diameter: 400mm, max. forming film thickness: 500µm, film transport tolerance (motor): +/-0.2mm, forming area: 150-310x100-210mm, max. sealing pressure: 950kg, max. punching pressure: 10,000kg, max. forming depth: 60mm, sealing temperature: 80-200°C, vacuum pump power: 0.75kW, vacuum pump capacity: 20m³/h, forming heater power: 4.8kW, air consumption: 34m³/h, connected load: 13kW, length: 5530mm, width: 880mm, height: 1460mm, with documentation, Videojet 1520 continuous inkjet printer and Lauda Ultracool UC-0080 recirculating chiller. An on-site inspection is possible. Hjdpfx Aez Agf Nodwju

Condition: excellent (used), Automatic machine with product feed conveyor in line set up for manual loading of the product on the belt or inserted in completely automatic lines. Suitable for packaging individual or already packaged products such as boxes, trays, hanks of cable, parquettes, or light to very light products with a minimum height of 3mm such as boxes, linen, reams of paper, magazines, leaflets. In production up to 23.09.2026 Hsdpfx Ajz D Ugusdwju Price € 7,995.00 Quantity 2 machines available Shipping can be arranged for the buyer

Year of construction: 2024, condition: like new (used), functionality: fully functional, Sure. Below is a technical and commercial description suitable for product presentations, catalogs, or proposals: ### Mertmakina Mattress Packaging Machine with Integrated Quality Control System The Mertmakina mattress packaging machine is an industrial solution designed to automate and optimize the mattress packaging process, ensuring speed, uniformity, and quality in the final product packaging. The equipment integrates a quality control system, allowing for the monitoring of key stages in the packaging process and the identification of potential anomalies before the product leaves the line. #### Key Features * Automatic mattress feeding and positioning, ensuring a continuous and regular process. * Automatic packaging system, adapted to the dimensions and characteristics of different mattress models. * Control of the application and sealing of the packaging, ensuring a uniform and consistent finish. * Integrated quality control system, designed to verify process parameters such as positioning, packaging integrity, and proper sealing. * Error and anomaly detection, with the possibility of signaling or automatic rejection of units that do not meet the defined parameters. * Intuitive operating interface, allowing the operator to monitor the machine's status, adjust parameters, and consult process information. * Recording and monitoring of production and control data, contributing to traceability and continuous improvement of production. * Robust industrial construction, suitable for operation in continuous production environments. * Increased productivity and reduced manual intervention, while simultaneously reducing variability between packages. ### Integrated Quality Control The integration of quality control transforms the machine into a more complete production and inspection system. Each mattress can be monitored during the process, allowing verification of whether the packaging has been correctly applied and whether the product meets the previously defined parameters. Hsdpfx Aez Dk Arsdwsu When a condition outside the established limits is detected, the system can generate an alert for the operator and, depending on the installed configuration, automatically direct the product for inspection or rejection. In this way, the solution helps to reduce packaging errors, increase the consistency of the final product, improve traceability, and reduce waste. ### Result The Mertmakina mattress packaging machine, equipped with an integrated quality control system, provides a solution focused on automation, productivity, standardization, and process control, enabling companies to increase the efficiency of the production line and ensure a consistent final presentation of the mattresses.

Condition: new, Year of construction: 2020, functionality: unexamined, type of input current: AC, input voltage: 220 V, film width: 450 mm, roll diameter: 300 mm, overall weight: 600 kg, input current: 16 A, cutting length (max.): 6,000 mm, additional equipment features: SZCZĘKI Z EUROZAWIESZKĄ, We offer this new FLOW PACK type blister packaging machine from DID-PAK, model CB-450, manufactured in 2020. – The machine is 100% complete; the product infeed conveyor is not mounted in the picture because, after delivery by the manufacturer, it was not integrated into the production line, and therefore, there was no need for its complete assembly. Technical specifications of the packaging machine: PERFORMANCE Up to 100 products per minute Film speed up to 40 m/min The characteristics of the product and film may affect the machine's performance. Parameter Description: Model: CB-450 Voltage: 220 V Frequency: 50 Hz Power: 3.4 kW Current: 16 A Date of manufacture: 2020Y 01M Serial number: Weight: 600 kg Notes: The characteristics of the product and film affect the performance. Hedozk Hfxspfx Adweu Cutting length: 50–6000 mm Product width: max. 210 mm Product height: max. 50 mm Roll diameter: ≤ 300 mm Core diameter: ≤ 75 mm Material width max.: 450 mm Roll weight max.: 25 kg Voltage: 220 V, 50 Hz Power consumption: 3.4 kW Machine weight: 600 kg Dimensions: 3900 × 850 × 1500 mm Cutting type: Rotary Motors: Dual frequency If you have any questions or require additional information, please send a message or contact us by phone.

Condition: good (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: A-250101, total length: 4,600 mm, total height: 1,800 mm, total width: 1,250 mm, input voltage: 230 V, overall weight: 650 kg, compressed air connection: 4 bar, warranty duration: 3 months, input current: 6 A, roll width: 680 mm, pipe diameter (max.): 76 mm, product height (max.): 120 mm, product height (min.): 25 mm, product length (max.): 550 mm, product length (min.): 100 mm, Item A250101 – Record Jaguar 88 Flow Pack Machine For sale: Used Record Jaguar 88 flow pack packaging machine. Product flow direction: Left to right Machine finish: Painted Machine Specifications: Overall machine length: 4.6 metres Machine width: 1.2 metres Overall machine height: 1.8 metres Working height: 0.85 metres Usable infeed conveyor length: 2.0 metres Usable outfeed conveyor length: 0.5 metres Flight distance: 400/800 mm Machine capacity: 3,600 packs per hour Machine Connections: Power supply: 230 V N + PE Connected load: 3.2 kW Plug type: CEEform, 5-pin, 16 A Compressed air: Yes (the machine can also operate without compressed air) Machine Features: • Independent temperature control for the cross-sealing unit and longitudinal sealing rollers • 1 set of pulling rollers • 1 set of sealing rollers • 1 set of folding rollers for the longitudinal sealing seam • 1 set of sealing knives, 270 mm wide • Passage height of the cross-sealing unit: 150 mm • Safety coupling in the cross-sealing unit • Flight distance: 400/800 mm • Two-speed control of the flights • Fixed forming shoulder • Maximum film width: 600 mm • Top chain with flights • Mechanical film-length adjustment • Pneumatic product pushers • Mechanical adjustment of cross-sealing speed • Rotating control panel • Machine mounted on wheels for mobility, with adjustable feet • Electronic speed control via potentiometer • Additional 230 V socket • Equipped with a hot foil printer for printing the date on the film • Pneumatic opening and closing of the sealing rollers • Usable infeed conveyor length: 2,000 mm • Usable outfeed conveyor length: 500 mm • All parts that come into contact with the product are made of plastic or stainless steel Hodpez Er Nvefx Adwou The machine is particularly suitable for tall and/or long packages.

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, Manufacturer: REMUND AG (Switzerland) Type: Vacuum packaging machine Hedpfx Adoz Hdbtjwju Capacity: 1–4 bags/cycle Year of manufacture: 2002 Workstations: 2 Products: Cheese, meat, and other large-format food products Equipped with modified atmosphere packaging (MAP) PLC: Siemens S7 Condition: very good and fully functional

Condition: used, Year of construction: 1990, The Adolf Illig SB 53C - DIN is a used skin and blister packaging machine (universal vacuum thermoforming machine). It was developed for the economical production of transparent blister packaging and for the direct skin packaging of products onto cardboard backing cards. The used skin and blister packaging machine was installed at a university and used exclusively for teaching purposes. Manufacturer: Adolf Illig Type: SB 53C - DIN Year built: 1990 Technical doc.: Yes Condition: Second hand Price: By request Power consumption & electrical system: Heating capacity: 4.5 kW (provided by 15 ceramic surface heaters for uniform heating) Drive motor power: 1.24 kW Vacuum system: Maximum vacuum level of 0.95 kp/cm² (frequently operated with Busch vacuum pumps) Air consumption: Approx. 30 litres per working cycle. Film roll holders: Film roll diameter for Blister packaging: Max. 400 mm Film roll diameter for Skin packaging: Max. 350 mm Film roll core diameter: 70 mm. Format ranges & capacities: Maximum forming area: 405 × 500 mm Packaging / cardboard size: 400 × 495 mm Maximum draw depth: 100 to 150 mm (both positive and negative forming possible) Maximum packaging height: 150 mm Film width: 445 mm. Dimensions and weight: Hsdpfx Asxm Sa Hsdweu Machine dimensions: Approx. length 1.600 mm × width 1.135 mm × height 2.710 mm Empty weight: Approx. 500 kg.

Year of construction: 2022, condition: good (used), 1 x PA Eclipse-R Rotary Tray Sealer Gas Flush Year: 2022 Hjdpfxsz Ehfyo Adwsu Serial Number: ECR-MC-00046

Condition: good (used), Year of construction: 2014, OCS Checkweigher Weight range min - 100grams, Max 800 grams Speed 30 pieces / min Power 230v / 50hz Complete with touch screen control Hodoucgalspfx Adweu Two pneumatic reject arms Fully stainless steel Belt dimensions 1750mm x 195mm In good working condition

Condition: ready for operation (used), Year of construction: 2004, An Illig slide blister machine is available. Blister length range: 110mm-500mm, blister width range: 50mm-280mm, max. blister depth: 80mm, fold-over edge. An on-site inspection is possible. Hedpfxjyyplcj Adwju

Condition: good (used), Year of construction: 2023, functionality: fully functional, Cushion Pack CP 428 S2i/6 packaging cushioning machine (cardboard shredder) in fully functional condition: Year of manufacture: 2023 Power: 3 kW Cushion width: up to 420 mm Infeed height: 20 mm Hsdpfx Ajzpwnzodwju Shipping via a freight forwarder is possible after consultation. #8552-1

Condition: refurbished (used), Year of construction: 2000, functionality: fully functional, input voltage: 400 V, overall weight: 400 kg, type of input current: three-phase, total length: 3,000 mm, total width: 1,600 mm, total height: 1,850 mm, control voltage: 24 V, input frequency: 50 Hz, input current: 3 A, Object A240401. Rebuilt stainless steel semi-automatic (hand) packing conveyor with Kwiklok clip closing set. Stainless steel hand packaging conveyor, including 2 bag blowing tables, and Kwiklok bag tensioner type 1082J8 and Kwiklok clip closing machines, type 872 XLS. Machine direction: from Right to Left. Machine information: Total machine length: 3.0 meters Total machine width: 1.6 meters (including bag blowing table) Total machine height: 1.85 meters Machine working height: 0.97 meters Length of input conveyor used: 2.65 meters Length of discharge belt used: 0.3 meters Flight distance: 305 millimeters Machine capacity: 1800 packages per hour. Electrical data: Power connection: 400 volts, neutral and earth. Power consumption: 3.2 kilowatts. Plug connection: Cee-Form 5 pin 16 Amp (round red plug). Compressed air: No. Minimum and maximum product dimensions: Products from 100 to 500 mm long. Products from 80 to 210 mm wide. Products from 40 to 160 mm high. Machine version: Frame and legs (2) made of stainless steel construction, ASI 304. Hjdpfsz Euk Aox Adwju Deck, guides, and flights are stainless steel ASI 304. Bag tensioner machine, Manufacturer Kwiklok, type 1082J8. Clip closing machine, Manufacturer Kwiklok, type 872 XLS (clips Kwiklok type JNRP). At the end of the transporter, there is a roller deck, length 0.3 millimeters. Machine equipped with a safety guard at the beginning of the roller deck. Machine stands on wheels (mobile). Fixed carrier speed. New electrical installation on the packing track. Machine is completely rebuilt. Machine description: Packing track, machine suitable for packaging food and non-food products in foil bags. Machine includes: 2 sets of bag blowing tables. Warranty: 3 months.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, Equipment: documentation/manual, 🔧 Multivac Semi-Automated Blister Packaging Line (2021 – Unused) Complete Medical Device Packaging System – Fully Stainless Steel Available now at Used Machine Tools Ireland Ltd, this Multivac semi-automated packaging line is in as-new condition, originally installed in 2021 at a medical device facility but never used. This is a high-spec, turnkey blister packaging solution, ideal for medical, pharmaceutical, food and high-spec manufacturing environments requiring cleanroom-compatible, stainless steel equipment. This Multivac semi-automated blister packaging line (2021) includes dual T700 tray sealers, MR625 labelling system, robotic handling modules, inspection stations, and full conveyor system, designed for medical-grade blister packaging in stainless steel environments. Suitable for 150–180mm blister packs with double sealing process. 🚀 Key Highlights ✔️ As new – never used (2021 installation) ✔️ Full stainless steel construction – medical grade ✔️ Complete automated blister packaging line ✔️ Dual Multivac T700 tray sealers ✔️ Integrated labelling, inspection & robotic handling ✔️ Designed for precision medical device packaging ✔️ Includes large quantity of spare parts & tooling ⚙️ Packaging Process Overview This line is designed for high-efficiency double blister packaging: 4-place carrier tray automatically loaded with empty blister packs Manual filling of blister packs with product Tray moves to Multivac T700 Sealer #1 Automatic sealing + labelling via Multivac MR625 Cross Web Labeller Small blister packs are automatically transferred into larger blister packs (double pack) using a Multivac H242 Robotic Handler (double pack) Packs placed into 2-place carrier tray Tray moves to Multivac T700 Sealer #2 for final sealing Finished trays move to manual unloading & boxing stations via a Multivac H242 Robotic Handler Three inspection stages ensure quality control 📦 Product Size Capability Blister Pack Sizes: 150 x 150 x 70mm 180 x 180 x 80mm 🏭 Full Equipment List 🔹 Multivac Equipment 2 x Multivac T700 Automatic Tray Sealers High-performance automatic tray sealing system 1 x Multivac MR625 / MR6318 Cross Web Labeller Fully automatic cross web labelling 2 x Multivac H242 Robotic Handling Modules Automated product transfer High-speed pick & place functionality Designed for integration with packaging lines 2 x Multivac MTD351 Tray Denesters Automatic tray separation and feeding Reliable high-speed tray handling 🔹 ASYS Tecton Automation Equipment 2 x ASYS Tecton Tray Stackers 1 x Horizontal Tray Stacker (6 x 5 carriers) 1 x Horizontal Tray Stacker (4 x 5 carriers) 3 x ASYS Tecton Inspection Stations 🔹 Additional Equipment 23 x Conveyor Sections (various lengths) Multiple HMI Control Panels throughout line 13 x Stainless Steel Handling Trolleys Extensive spare parts package included 💡 Typical Applications Medical device blister packaging Pharmaceutical packaging lines Cleanroom packaging systems Double blister / sterile barrier packaging High-spec manufacturing environments 📦 Condition Hedpfxsyzf Uce Adwsu Installed 2021 Never used – as new condition Fully maintained & preserved Now dismantled - videos of line in operation are available Note: Specifications and information provided in each listing are supplied in good faith; however, their accuracy cannot be guaranteed. Some tables in the videos/photos are not included No printers are included