Used Thermo Forming for sale (6,587)

Condition: new, Year of construction: 2017, functionality: fully functional, operating hours: 25 h, input voltage: 380 V, type of input current: three-phase, total height: 1,500 mm, total length: 5,200 mm, total width: 2,350 mm, overall weight: 2,500 kg, saw band length: 520 mm, saw band width: 580 mm, New machine. Ndjdpfx Abeunia Hsyoc

Condition: excellent (used), Year of construction: 2000, machine/vehicle number: 403, THERMO FORMING MACHINE TFT IMC 5030 (WITH TOOLS) Equipment / Additional information: unwinding: Roll recording: easy Max roll diameter: mm 1000 Settlement: automatically Thermoforming machine: Maximum tool dimensions: mm 520x330 Pos. Molding height max .: 15 mm Neg. Molding height max .: 120 mm Sheet width: mm 150/760 Movement Step: mm 50/330 Ndjdpon D Ew Iefx Abyjc Max HIPS film thickness: 1.8 mm Hub of the sub-table: 150 mm Clamping force: 7500 Kg Inst power top heater: 18.8 Kw Inst power under heater: 14.1 Kw Idle clock speed: per minute 40th power main drive motor: 2.2 Kw Engine power. Film feed: 0.75 Kw Air operating pressure: Kg / cm2 7 Water consumption at 12 °: 1t / 1` approx.30 Air consump. at 7 kg / cm2: 1t / cycle 125 Installed power: Kw 50 9xTool (PRICE FOR TOOLS: € 2.500.- / FOR EACH TOOL): Article no. // Tool no. // Cavities // Description / Product: 3599 // 457 // 10 // Vending machine cup capacity/capacity/contenance=223ml 593 // 460 // 8 // Coffee-to-go / thermo mug / thermo cup Filling capacity / Capacity / Contenance=300ml / 12 oz 509 // 452 // 6 // Ice cream cup: filled to the brim=140ml / Filling capacity with headspace 6mm: 120 ml 591 // 459 // 10 // Thermo mug ⌀ 81/180ml 740 // - // - // Standard cup with sealing edge ⌀ 75-120ml 3589 // 458 // 12 // Coffee-to-go / thermo mug / thermo cup: Filling capacity / Capacity / Contenance=80ml 595 // 456 // 10 // Vending cup / Gobelet pour automate: Filling capacity / Capacity / Contenance=150ml 210 // - // - // Baking case / technical part / plate or tray 8000 // 455 // - // Granule cup 180 ml / technical part with flat sealing edge

Condition: excellent (used), Year of construction: 1999, operating hours: 80,188 h, machine/vehicle number: 322, Max. film width 700-800 mm Equipment / Additional information: -GREINER STACKING / Transfer device R3 (Ref. No.: 95002.24) // M. No.: 00020 // Age: 1998 PRICE GREINER STACKING: € 6.500.- / LOT SWITZERLAND Heating from above and below Material PS and PP were processed 450 Ps // 350 Pp Ndedpfsq Nn Hcjx Abysc The following tools were used on the machine: 8-way WZ-Ø95 and 15-way WZ-Ø73 and 15-way WZ-Ø86 Packaging was produced especially for the dairy industry. The cycles are 18-25 strokes - depending on the cup weight.

Year of construction: 1988, condition: excellent (used), machine/vehicle number: 3284, (min.) material thickness: 0.65 mm (max.) material thickness: 2 mm Technical Data: Width of film, max./min. 450/350 mm Forming area max. 430 x 160 mm Drawing depth max. negative/positive 6/20 mm (on request 22 mm negative) Top heater max. 10,15 kW Driving motors 3,0 kW Total connected load at 100 % duty cycle 12,7 kW Working air pressure 6 bar Air consumption (dependent on product) max. 1250 I/min Rate of water flow max. 1,0 m3/h Nedpfxohbu E Hj Abyjdc COMPACT AND ROBUST - giving continuous high output. Easy and ergonomical operation (e.g. take- off height 1300 mm). QUICKLY CHANGEOVER - from 30° to 90° foil feed giving maximum material utilisation for both square and round lids. Heater changeover problem-free. PRECISION - The accuracy of the form table movement is guaranteed by linear guide bearings and hardened rods. The safe reliable guarantee for precision. OPTIMUM PUNCHING ACCURACY EVEN DURING MAXIMUM OUTPUT Cam controlled function sequence guarantees absolute precision with every cycle.

Year of construction: 2023, condition: used, This listing is for a 2023 Thermo Scientific TSCM17PV Controlled-Rate Freezer The unit is in full working condition and ready for immediate use This controlled-rate freezer is a high-quality lab instrument manufactured by Thermo Scientific (Model: TSCM17PV). This 17L system is designed for precise, repeatable cryopreservation of biological samples, ensuring optimal cell viability through controlled cooling rates. It features an integrated thermal printer for data traceability and is suitable for GMP-compliant environments. It has been sourced directly from a working facility, offering premium performance and dependability for standard laboratory applications while ensuring a cost-effective alternative to purchasing brand new equipment. Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. Ndjdpe Advdusfx Abyec specifications_en: Capacity: 17 L; Voltage: 220-230V; Frequency: 50/60 Hz; Amperage: 5.5A; Phase: 1; Includes integrated thermal printer.

Condition: excellent (used), Year of construction: 1992, operating hours: 41,685 h, Technical specifications: Rated power, kW: 11,3 Ndedpfx Abeq A Um Reyjc Mold area, mm: 475 x 250 Max. film width, mm: 495 Min. film width, mm: 150 Max. feed length, mm: 280 Min. feed length, mm: 50 Max. drawing depth/negative, mm: 100 Number of cycles/min.-max.: 48 Consumption of air/cycle at 6 bar: 100 Nl (net-pressurized air) Heat energy to be dissipated: with top heating ca. 10 260 KJ/h with top and bottom heating ca.: 17 715 KJ/h Special equipment: Hollow floor facility available Control cabinet: included

Condition: excellent (used), Year of construction: 2025, functionality: fully functional, DESCRIPTION: Complete production line: hydraulic uncoiler, guided feeding system, roll forming machine, hydraulic post-cutting, and automatic run-out/stacking. Profile-specific tooling for TR135-310-930 high-profile sheet metal. Ndjdpfxjzvaibs Abyjc Siemens PLC/HMI control system and Schneider frequency-controlled main drives. Minimum thickness: 0.75 mm, Maximum thickness: 1.5 mm Effective width: 930 ± 5 mm Feeding width: 1500 mm Material: Galvanized coil, Yield strength: 350 MPa Working speed: approximately 20 m/min Stacker length: 12 m Location of the line: Serbia

Year of construction: 2017, condition: used, Cooling group / cooling unit Frigoblock Year of construction 2017 Cevoman bv. Lenskensdijk 5 2200 Herentals Ndsdpfezldt Aex Abyjc Belgium

Condition: like new (used), Year of construction: 2024, functionality: fully functional, sheet thickness (max.): 3 mm, total width: 2,000 mm, total length: 14,130 mm, total height: 2,170 mm, input voltage: 380 V, power: 40 kW (54.38 HP), overall weight: 13,680 kg, We offer this used Huachen ROLL FORMING MACHINERY HC50-60X80-100-120 profiling line, manufactured in 2024. Model: HC50-60X80-100-120 Dimensions: 14130 × 2000 × 2170 mm Serial Number: 202408976 Power: 32.5 + 7.5 kW Weight: 13680 kg Manufacturing Date: 2024-08-12 Voltage: 380 V Frequency: 50 Hz Standard: YB/T 4249-2011 USED OMEGA PROFILING MACHINE – As good as new Technical features: • Production of Omega profiles 80 – 100 – 120 (see technical data sheet) • Automatic Omega profile changeover Ndsdpfez D Dxgsx Abyec • Maximum workable thickness: 3 mm • In-line hole punching • Hole punching on the profile height • Complete profiling line, ready for use • High profile precision and repeatability Machine condition: • Limited use: only 10 months of operation • Perfectly functional • Regular maintenance • Excellent mechanical and aesthetic condition Advantages: • Reduced setup times thanks to the automatic changeover • Ideal for medium to high production volumes • Excellent value compared to purchasing a new machine Available for inspection and testing. Technical documentation available. Attractive price.

Year of construction: 2010, condition: excellent (used), functionality: fully functional, 1 x Giemme Thermo Packaging Machinery S.r.l. semi-automatic shrink bundling machine. Ndodpfxeyzxgfj Abyec Manufacturer – Giemme Thermo Packaging Machinery S.r.l. Model – ALTAIR 70 P. Serial number – 001.041.10. Date of manufacture - 2010. Speed – up to 12 packs/minute. Electrical supply – 400 V / 50 hz / 3 phase. Power – 20 kW. Overall dimensions – 3000mm long x 1200mm wide x 2000mm high.

Condition: used, Year of construction: 2012, Offered for sale is a laboratory ultrapure water system with an external filter unit. Power consumption: 80W. Operating voltage: 24V. Equipped with an external filter housing, pressure gauge and hoses. Inspection possible by arrangement. Nodpfo Ad Npqox Abysdc

Year of construction: 1987, condition: excellent (used), functionality: fully functional, 1987 Finzer ZUB 250 Multislide Punching & Forming Machine Used 1987 Finzer ZUB 250 multislide machine for sale. 250kN press unit, 6 forming slides, manual decoiler and 250mm feed. Very good condition. Manufacturer: Finzer Model: ZUB 250 Machine Type: Multislide Punching & Forming Machine Year: 1987 Condition: Very Good Machine Description The Finzer ZUB 250 is a heavy-duty mechanical multislide stamping, punching and forming machine designed for the high-volume production of complex components from strip and wire. This machine is equipped with a 250kN / 25-tonne press unit, a set of six forming slides and a manual decoiler, providing a versatile production system capable of combining punching, blanking, bending and forming operations within one production cycle. Multislide technology is particularly effective for components requiring several bends or forming operations from different directions. Compared with conventional single-slide power presses, the multiple independently arranged forming slides allow complex parts to be produced efficiently with reduced secondary operations. Main Specifications Manufacturer: Finzer Model: ZUB 250 Year: 1987 Machine Type: Multislide Punching & Forming Machine / Stamping & Bending Machine Press Capacity: Approx. 250kN / 25 tonnes Number of Forming Slides: 6 Maximum Feed Length: Approx. 250mm Maximum Strip Width: Approx. 60mm Maximum Wire Diameter: Approx. 3mm Forming Slide Capacity: Approx. 30kN per slide Forming Slide Stroke: Approx. 0–50mm Maximum Production Speed: Up to approx. 400 strokes/minute, depending on tooling, component and material Machine Weight: Approx. 4,000kg 250kN / 25 Ton Press Unit The machine incorporates an approximately: 250kN / 25-tonne press station The press operation can then be combined with movements from the surrounding forming slides to produce complex finished components in a continuous cycle. Six Forming Slides This Finzer is supplied with a complete set of six forming slides. The multiple-slide arrangement is one of the main advantages of the ZUB system, allowing tooling to approach the component from several directions during the same production cycle. Forming capacity per slide: 30kN Slide stroke: Adjustable up to approximately 50mm The slides can be tooled for sequential bending, forming and positioning operations. Ndsdpfoz S T Injx Abysc Manual Decoiler Included The machine is supplied with a manual decoiler for coil-fed production. Coil & Strip Feed Capability Comparable Finzer ZUB250 machines are specified with: Maximum Strip Width: Approx. 60mm Maximum Wire Diameter: Approx. 3mm Maximum Feed Length: Approx. 250mm Feed length is typically adjustable to suit the individual component and tooling setup. High-Speed Production Depending on component design and tooling, period ZUB250 specifications quote operating speeds of approximately: 25–400 strokes per minute This makes the Finzer particularly suitable for repetitive, high-volume manufacture where several conventional press and forming operations might otherwise be required. Mechanical Cam-Controlled Multislide System The Finzer ZUB series uses a mechanically controlled cam-driven forming system. Cam-controlled multislide machines are particularly effective for repeat production because the motions of the forming tools can be precisely coordinated with the press and material feed.

Condition: used, Thermo Fisher Scientific KingFisher FLEX Magnetic Particle Processor 4 units available Manufacturer: Thermo Fisher Scientific Model: KingFisher FLEX Equipment Type: Automated Magnetic Particle Processor / Nucleic Acid Purification System Application: Automated DNA/RNA purification and sample preparation Description: The Thermo Fisher Scientific KingFisher FLEX is an automated magnetic particle processing system designed for high-throughput purification and sample preparation. The KingFisher FLEX uses magnetic bead technology to automate the processing of biological samples, providing consistent and reproducible purification of DNA, RNA, proteins and other biological targets. It is widely used in molecular biology, genomics, biotechnology, pharmaceutical research and clinical laboratory environments. The system is particularly suited to laboratories looking to automate repetitive sample preparation and purification workflows while reducing manual handling and improving throughput. Key Features: Ndedez I S D Sopfx Abyjc Automated magnetic bead-based sample processing Designed for high-throughput laboratory workflows Suitable for DNA and RNA purification Can be used for protein and other biomolecule purification applications Programmable automated processing protocols Consistent and reproducible sample preparation Suitable for research, biotechnology and pharmaceutical laboratories Multiple plate formats supported depending on configuration User-friendly automated operation Compact laboratory footprint Typical Applications: DNA purification RNA purification Nucleic acid extraction PCR sample preparation Genomics and molecular biology Next-generation sequencing workflows Protein purification Pharmaceutical research Biotechnology research High-throughput sample preparation Removed from pharma plant in Cork, IE. Devices are in very good condition. Sold as seen ----- Keywords: Thermo Fisher, Thermo Scientific, KingFisher FLEX, King Fisher Flex, KingFisher Flex Purification System, magnetic particle processor, magnetic bead processor, DNA extraction, RNA extraction, DNA purification, RNA purification, nucleic acid extraction, sample preparation, automated sample preparation, molecular biology, genomics, biotechnology, pharmaceutical laboratory, laboratory automation, PCR preparation, NGS, next generation sequencing, protein purification, research laboratory equipment, scientific equipment, lab equipment.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Complete P20 & P30 HVAC Duct Flange Profile Roll Forming Lines with Butyl Sealant System For sale is a complete set of two professional roll forming lines for the production of P20 and P30 flange profiles, used in the manufacturing of rectangular HVAC ducts and fittings. The set includes: - P20 flange profile production line - P30 flange profile production line Both machines are equipped with an integrated butyl sealant application system. Depending on production requirements, the profiles can be manufactured with or without factory-applied butyl sealant. This provides full flexibility and allows the finished profiles to be adapted to different duct manufacturing technologies and customer requirements. Ndodpfx Aezx Rz Hebysc The machines perform the complete production process – from coil decoiling, through multi-stage roll forming, to automatic cutting of the finished profile to the required length. Technical highlights - 18 roll forming stations - Automatic PLC-controlled cutting system - Production speed up to 9 m/min without sealant application - Production speed up to 5 m/min with butyl sealant application - Integrated butyl sealant application system - Complete production lines for P20 and P30 profiles Both machines are in very good technical condition. Since new, they have been used exclusively for the production needs of our own HVAC duct manufacturing facility. They have not been used for continuous mass production of profiles for commercial sale, therefore their overall level of utilisation is relatively low. Both production lines are fully operational, properly adjusted, tested and ready for immediate production. The machines are offered as a complete P20 + P30 set, allowing the buyer to establish in-house production of the two main flange profile sizes commonly used in the manufacturing of rectangular HVAC ducts and fittings. Relocation and commissioning support We can provide technical assistance with dismantling and relocation of the machines. We can also support the buyer with installation, adjustment, testing and commissioning at the new production facility, helping to ensure that both lines are properly set up and ready for production after relocation. The machines can be inspected while in operation, and production tests can be carried out prior to purchase. The indicated price is NET and VAT will be added where applicable.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Equipment: documentation/manual, Professional Spiral Duct Forming Machine – Ø80–1600 mm We are offering for sale a complete industrial machine for the production of round spiral ducts (SPIRO ducts) for HVAC, ventilation and dust extraction systems. We are the first owner. The machine was purchased directly from the manufacturer, professionally commissioned, configured and fine-tuned for production. It has only been used occasionally for our own production requirements and has never been operated in continuous or multi-shift mass production. The machine is fully operational, properly adjusted and ready for production. It is currently connected and can be demonstrated under actual production conditions, allowing the buyer to inspect the complete process and the quality of finished ducts before purchase. Key Features * working diameter range: Ø80–1600 mm * production speed: up to 60 m/min * installed power: 11.25 kW * galvanized steel: 0.4–1.2 mm * stainless steel: 0.4–0.7 mm * aluminium: 0.4–1.3 mm * pneumatic sheet metal strip decoiler * touchscreen control panel * automatic lubrication system * automatic forming angle adjustment * automatic rotary cutting * automatic fault detection * smooth ducts or single/double reinforcing beads * external spiral lock seam * machine weight: approx. 2,900 kg 39 Forming Heads Included The machine comes with an extensive set of 39 forming heads covering 22 diameters: Ø80 (1), Ø100 (2), Ø125 (3), Ø160 (3), Ø200 (3), Ø250 (3), Ø315 (3), Ø355 (2), Ø400 (2), Ø450 (2), Ø500 (2), Ø560 (2), Ø630 (2), Ø710 (1), Ø800 (1), Ø900 (1), Ø1000 (1), Ø1120 (1), Ø1250 (1), Ø1400 (1), Ø1500 (1), Ø1600 (1). Nedpfszt Ni Eox Abyedc The set therefore covers the full working range from Ø80 to Ø1600 mm, with additional heads for the most commonly produced diameters. Spare Parts Package A comprehensive package of spare and wear parts is included, such as forming and guiding components, lock-seaming rollers, pneumatic components, cutting knives/rotary cutting components and decoiler braking parts. This provides an important operational reserve and helps minimise downtime without having to immediately source essential parts internationally. Production-Ready + Training The buyer receives a fully configured and proven production machine, not an uncommissioned unit requiring extensive setup and adjustment. We provide on-site commissioning assistance and operator training at the buyer’s facility, including machine operation, forming head replacement, adjustment for different diameters and sheet thicknesses, maintenance and trial production. The machine can be inspected and demonstrated during actual spiral duct production before purchase. Approximately 100 steel stacking racks (Maurack type) for storing and transporting finished ducts are also available and can be purchased together with the machine. The machine is located in Poland. Transport can be arranged individually. Price: upon request / subject to negotiation. For further information, photos, videos or to arrange a live machine demonstration, please contact us directly.

Year of construction: 2019, condition: like new (used), Marchenisi Group Box Forming Machine Model FRB500 Year 2019 Automated box forming machine. Form cartons with a Nordson hot melt glue pump. - fill cartons with sealed strips (robot) - indexing - insert booklet Nsdpfx Aboybtnvjysdc - seal lid with hot melt glue - index to serialised printing - carton discharge

Condition: ready for operation (used), A good used Rovema Stabilo Bag Forming set from a VPI Rovema Form Fill Seal Machine - Stabilo size 130 x 75mm Some other sizes available - please send wahts app with your exact requirement Nsdjz Epvgjpfx Abyodc The main advantages of a Stabilo® or quad seal package are premium shelf presence and a stable stand-up base. The four corner seals create defined edges and full front and back display panels, and Rovema's patented sealing process is what holds that squared, carton-like shape on the shelf. The format is also flexible to customize for your product. You can add easy-open and reclosable features, tack the top and bottom gussets for a cleaner finish, or fit a one-way degassing valve so fresh-roasted coffee beans can continue to de-gas, all without losing the bag's shape.

Year of construction: 2019, condition: used, Thermo Fisher Scientific Versa Weigh GVW0 V312 – Automatic Checkweigher Manufacturer: Thermo Scientific Model: Versa Weigh GVW0 V312 Serial number: E307 Year of manufacture: 2019 Machine type: Automatic checkweigher Description The Thermo Scientific Versa Weigh GVW0 V312 is a high-precision automatic checkweigher designed for dynamic inline weight control in modern production and packaging lines. The system ensures accurate weighing and compliance with strict quality standards. This checkweigher is built for high-speed production environments and is commonly used in food, pharmaceutical, and consumer goods industries. Ndedpfoyt Hv Rex Abyoc Technical Specifications - Manufacturer: Thermo Scientific - Model: Versa Weigh GVW0 V312 - Serial number: E307 - Year: 2019 - Supply voltage: 230 VAC - Frequency: 50–60 Hz - Power consumption: 600 W - Accuracy class: XIII (1) - Operating temperature: 0 – 40 °C Weighing Specifications - Minimum product weight: 35 g - Maximum product weight: 300 g - Scale interval: e = d = 0.5 g - Maximum throughput: 100 ppm (products per minute) - Maximum belt speed: 0.70 m/s Key Features - High-precision dynamic inline weighing - Designed for high-speed production lines - Compact hygienic industrial design - Suitable for integration into automated packaging systems - Reliable operation in demanding production environments Applications - Food packaging lines - Pharmaceutical production - Cosmetics and consumer goods - Quality control in automated processing lines Condition Used More photos and full specifications: /

Condition: good (used), 1 x Provatec 745 Burger Forming Machine Serial number: 745.04.686 Ndsdez Hn Tajpfx Abyoc 3 Phase

Year of construction: 2023, condition: good (used), functionality: fully functional, Description Thermo Fisher Scientific Applied Biosystems QuantStudio™ 5 Real-Time PCR Instrument Service history The system underwent preventive maintenance by Thermo Fisher Scientific on 17 April 2026. Last service: 17 April 2026 Performed by: Thermo Fisher Scientific Next scheduled service: 17 April 2027 Included in the sale Ndodpfjzr Nr Rsx Abysc Applied Biosystems QuantStudio™ 5 Real-Time PCR Instrument 96-well, 0.1 mL thermal block Dell OptiPlex computer Monitor Keyboard and mouse QuantStudio Design & Analysis Desktop Software Certificate of Conformance Technical specifications Manufacturer / model: Applied Biosystems (Thermo Fisher Scientific) QuantStudio™ 5 Real-Time PCR System Block: 96-well, 0.1 mL, fixed; reaction volume 10–30 µL Optics: OptiFlex™, white LED, 6 independent channels, 21 filter combinations; excitation 450–680 nm, detection 500–730 nm Multiplexing: up to 6 targets Temperature: Peltier, 4–99.9 °C, uniformity 0.4 °C, 6 VeriFlex™ zones; max. ramp 6.5 °C/s, average sample ramp 3.66 °C/s Sensitivity: detects approx. 1.5-fold differences in singleplex; dynamic range 10 logs Display and memory: integrated 8.5″ touchscreen, 10 GB on-board Software: QuantStudio Design & Analysis Desktop Software Manufactured: 15 August 2023 Dimensions / weight: approx. 27 × 50 × 40 cm (W × D × H), < 26 kg Classification: For Research Use Only (RUO)

Year of construction: 2014, condition: used, This listing is for 1 of 2 Thermo Scientific ORBITOR RS Microplate Handler The unit is in full working condition and ready for immediate use This robotic microplate handler is a versatile arm designed to provide accurate and consistent automated movements for laboratory workflows. Manufactured by Thermo Scientific, this reliable collaborative robot is an excellent addition to any modern high-throughput screening facility. Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: Ndsdezqf I Espfx Abyoc This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. 2015 Cedrex Fluid X xsd-48 Pro Source Pedigree: Biotech / Research Facility Condition: Direct-from-Bench (Decontaminated/Original) Integrity: 100% Original Parts (Non-Refurbished)

Year of construction: 2004, operating hours: 5,000 h, condition: good (used), functionality: fully functional, machine/vehicle number: 2917, Thermo Scientific ARL 3460 Spectrometer Thermo Scientific ARL 3460 optical emission spectrometer (OES) for sale. This unit was previously used in a foundry and was operational until it was replaced. The equipment is designed for rapid chemical analysis of metallic materials and was used in foundries and the metallurgical industry for quality control and composition verification. Features: • Brand: Thermo Scientific • Model: ARL 3460 • Equipment type: Optical emission spectrometer (Spark OES) • Year of commissioning: 2004 • Condition: operational until replacement • Origin: foundry / metallic material analysis • Maintenance: Annual maintenance inspections • Applications: quality control and chemical analysis of metals • Analytical capability: simultaneous analysis of multiple elements, depending on the line/installed configuration, including C, Mn, Si, P, S, Ni, Cr, Mo, N, Cu, W, Nb, V, Co, Al, Ti, and Fe • Common materials: iron, carbon steels, stainless steels, super duplex steels, nickel-based alloys, and other metallic alloys • Includes: PC, monitor, spare parts, and commonly used consumables available with the equipment • Reason for sale: equipment upgrade Ndodpfx Abozdzgqsysc Additional information, photographs, and sales terms can be provided to interested parties.

Year of construction: 2010, condition: ready for operation (used), functionality: fully functional, We have two units in stock. Price is for one unit only. Carry out high-volume culturing with a high-level of contamination control with these stackable Thermo Scientific Forma Steri-Cult CO2 Incubators. This incubator combines the most advanced components available into a single incubator: CO2 sensor, precise microprocessor controls, active humidity control, HEPA air filtration and high-temperature decontamination capability. Integral 140°C high-temperature sterilization function, 14 hr duration. Optimized airflow system will not interfere with samples or incubator function. In-chamber HEPA air filtration continuously removes particulates for Class 100 quality conditions. On-demand 140°C sterilization cycle eliminates contamination from internal surfaces. Audible alarm activates if outer door is opened during the cycle or if temperature reaches 60°C or greater. Access code prevents accidental initiation of the cycle. Alphanumeric messaging center clearly displays temperature, CO2 and RH. Audible/visual alarms with silence button. Ndedpfxo Aaw Rbo Abyec Setpoints for temperature, overtemperature, CO2 and RH. Configurable audible ON/OFF, access code, HEPA filter change reminder, remote alarm contacts, tracking low temp and high and low CO2 and RH alarms. Temperature Range: Ambient +5°C to 50°C Relative Humidity: 95%, controllable Humidity Source: External humidity reservoir CO2 Concentration Range: 0 to 20% CO2 Sensor Technology: IR Sensor Capacity: 322.8 L Chamber Material: Polished Stainless Steel Interior Dimensions (DxWxH): 523 x 732 x 838 mm Dimensions (DxWxH): 686 x 1092 x 1002 mm Good working condition. Please check out our other listings as well.

Year of construction: 2022, condition: used, This listing is for a 2022 Thermo Scientific CW3 Cell Washer (Serviced August 2025) The unit is in full working condition and ready for immediate use. This automated centrifuge system delivers reliable, reproducible blood cell washing. It features an intuitive digital display, custom pre-set cycles, and standard rotor compatibility for optimized laboratory workflows Transparency Report and Technical Audit: • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. • Integrity: 100% Original Parts (Non-Refurbished) [[1](?srsltid=AfmBOoqR9FvD3vzpV-JO8iBilyVfeFnwQmkI6V46J74VJ3jWgm r396ss)] Notice for Procurement: Njdpfjzbthijx Abyodc This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. [[1](), [2]()] Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original)

Condition: used, This listing is for Thermo Scientific TSX Series High-Performance Undercounter Laboratory Refrigerator – Glass Door The unit is in full working condition and ready for immediate use The Thermo Scientific TSX505GA is a 156-litre high-performance undercounter laboratory refrigerator with a glass door and adjustable temperature range of 3°C to 7°C. It features automatic defrost, three adjustable shelves, touchscreen control, temperature alarms and an integrated data logger. The unit operates from 100–240V and has a low noise level of approximately 35 dBA Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Nedpfoz D E Uijx Abyedc Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory.