Used Interior Design for sale (19,287)

Condition: new, IPETRONIK Type: Interior Climate Simulation Box Technical data and description of the system: IPETRONIK Interior Climate Simulation Box (new and unused) The interior climate simulation box is designed to simulate the passenger compartment for testing in a recirculated air mode. It has a variable interior volume of 1.8 to 4 m³. The exhaust air volume flow from the front evaporator or the air conditioning unit is regulated and fed into the interior. The interior climate simulation box is used to test only rear evaporators installed in the passenger compartment. The insulating housing is mounted on an aluminum profile frame with rollers. A light is installed in the chamber. The box is protected against overtemperature by a safety thermostat (Esti). If the permissible temperature is exceeded, a glass cartridge in the ESTI is destroyed. The system is stopped. (TRIGGER TEMPERATURE: 80°C) Technical data of the insulating chamber: Dimensions: External: Width 1,860 mm Depth 2,360 mm Height 1,360 mm Internal: Width 1,700 mm Depth 2,200 mm Height 1,200 mm Insulation: 80 mm polyurethane rigid foam, CFC-free, U-value 0.27 W/m2K, building material class B1 according to DIN 4102 Technical data and description of the system: Connection: Tongue-and-groove system with embedded eccentric locking catches. Knodpfx Ajzd Ukpskpjc Surfaces: Both sides: 0.8 mm stainless steel sheet 1.4301, ground, grit 320 Floor design: 2.0 mm stainless steel sheet 1.4301, SM diamond pattern, non-slip, Floor with a 90° upturned edge around the perimeter (approx. 15 mm), floor sheet flush with the wall sheet, Pressure distribution plate made of laminated wood, can withstand a load of 1,500 N/rubber wheel (contact area > 4 cm2), 30,000 N/m2 surface load, floor joints completely welded, welded stainless steel pipe as a floor drain, leading downwards through the floor Chamber door: Hatch door, 1-leaf, 800 x 1200 mm i.L., DIN left, heated door frame (230 V), Heater tapes silicone-free, 4-sided sealing profile made of EPDM, Latch closure, lockable, emergency release, heated viewing window, 500 x 500 mm, 3-pane glazed, surface heating (230 V), frame heating (230 V), heating controlled externally, silicone-free edging Sliding wall: 1680 x 1180 mm, 80 mm polyurethane rigid foam, 0.8 mm stainless steel sheet 1.4301 on both sides, ground, grit 320, with protective film, closed with sheet metal on the reverse side (The rear wall can be adjusted manually and continuously to change the volume) Recirculation system: A heat exchanger (Systemair) for indirect temperature control is installed in the recirculation circuit for temperature control. The air is conveyed via a radial duct fan (Cosmo); heating is provided by an electric heater (Türk und Hillinger) integrated into the brine circuit. The heaters are continuously monitored by temperature monitors and limiters (Türk und Hillinger, Johnsson Controls). Cooling is provided by a secondary brine circuit with pumps (KSB) and a 3-way valve (Belimo). Installed electrical heating power 1 * 6kW. The mixing ratio is 50% water / 50% ethylene glycol. Power supply from station: =TME2++AS-QF21 Operating voltage: 400V Power: 17kW Rated current: 33A Fuse: 35A Control voltage: 24V DC /24V AC /230V AC PLC system: S7 300 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions by telephone.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, machine/vehicle number: 14418, controller model: Elgo, working width: 4,060 mm, sheet thickness (max.): 6 mm, overall weight: 9,500 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. sheet thickness: 6 mm Max. working width: 4,060 mm Back gauge depth: 1,000 mm Ksdsz Nit Ijpfx Akpjnc MACHINE DETAILS Control system: Elgo Power: 11 kW Dimensions & Weight Dimensions (L x W x H): 4,900 x 2,400 x 1,750 mm Weight: 9,500 kg EQUIPMENT Digital display Pneumatic sheet support system Safety light curtain Design: Swinging beam Drive type: Hydraulic Control: Conventional Back gauge type: Electric Angle adjustment: Motorized Shear gap adjustment: Motorized Table type: Fixed table CE marking

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller model: Heidenhain TNC 410, rotational speed (max.): 10,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 800 mm Travel range, Y-axis: 500 mm Travel range, Z-axis: 500 mm Spindle speed range: 0–10,000 rpm Spindle speed control: stepless Tool holder: SK 40 Knedoz Hxclspfx Akpoc Magazine capacity: 20 MACHINE DETAILS Control system: Heidenhain TNC 410 Workpiece clamping area: 1,000 × 500 mm EQUIPMENT Fixed angular table Vertical tool changer Full enclosure with sliding doors and interior lighting Various SK 40 tool holders Electronic handwheel Coolant system with high-performance pump Coolant pressure: 20 bar Chip conveyor Operating manual

Condition: refurbished (used), Year of construction: 2014, functionality: fully functional, workpiece height (max.): 60 mm, overall weight: 1,500 kg, controller model: Easy Control EC 10+, The machine has been completely overhauled! TECHNICAL DETAILS Edge material, strip: 0.4–6 mm Edge material, roll: 3 mm Workpiece thickness: 8–60 mm Workpiece width at workpiece thickness 8–22 mm: min. 70 mm Feed rate: 11 m/min Tool set Radius: 2 mm Joint milling unit Motor power: 2 × 2.2 kW Frequency: 200 Hz Cutting unit Motor power: 2 × 0.18 kW Milling unit Motor power: 2 × 0.27 kW Profile milling unit Motor power: 1 × 0.35 kW Design: WD 60 Working height: 950 mm MACHINE DETAILS Connected power: 9.8 kW Dust extraction connection: 1 × 120 mm / 3 × 80 mm / 1 × 100 mm Power supply: 400 V / 3 phase / 50 Hz Pneumatic pressure: 6 bar Knsdpfx Akez Iru Depoc Dimensions & Weight Dimensions (L x W x H): 4,773 x 1,525 × 2,182 mm Weight: 1,500 kg EQUIPMENT Electronic control system Easy Control EC 10+ Automatic edge feeding Tool set R = 2 mm Joint milling unit Gluing unit A6 Pneumatic 2-point adjustment of the pressure zone Cutting unit for chamfer and straight processing Pneumatic adjustment of the cutting unit for chamfer and straight processing Milling unit, counter-rotating Pneumatic adjustment of the milling unit for chamfer, radius, and straight processing Profile milling unit WD 60 Scraper blade with quick-change heads Pneumatic adjustment of the scraper blade Glue joint scraper blade Smoothing unit with 2 motors Control texts in German and English Operating manuals for commissioning, operation, and maintenance in English on DIN-A4 paper and CD-ROM Operating manuals for commissioning, operation, and maintenance in German on a USB stick Spare parts labels in German and English New tools included

Condition: ready for operation (used), Year of construction: 2013, operating hours: 12,486 h, functionality: fully functional, travel distance X-axis: 3,400 mm, travel distance Y-axis: 2,300 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 18,000 rpm, controller model: Siemens 840D sl, TECHNICAL DETAILS Travel range X-axis: 3,400 mm Travel range Y-axis: 2,300 mm Travel range Z-axis: 1,000 mm Rapid traverse X-axis: 60 m/min Rapid traverse Y-axis: 60 m/min Rapid traverse Z-axis: 40 m/min Design: C3 swivel head Swivel range C-axis: 200° Swivel range A-axis: 120° Spindle motor power: 24 kW Spindle mounting: HSK 63 A Spindle speed: 18,000 rpm Spindle cooling: Water cooling Design: Disc tool changer Tool magazine positions: 20 Pick-up positions: 1 Tool diameter: up to Ø 500 mm Table length: 2,000 mm Table width: 1,500 mm Table thickness: 30 mm Grid spacing: 100 x 100 mm Maximum load capacity: 2,000 kg Repeatability: approx. 0.012 mm MACHINE DETAILS CNC control: Siemens 840D sl Spindle operating time: approx. 12,486 hours Kedoz Izduepfx Akpjnc Power-on hours: approx. 37,297 hours EQUIPMENT 5-axis package: included Advanced Surface: included TCP: included Control panel size: 15 inches Remote maintenance: prepared Workpiece measuring probe: m&h wireless measuring probe Tool measurement: BLUM laser Minimum quantity lubrication: internal and external lubrication Central lubrication: automatic Spray mist extraction: with electrostatic separation Full protective cabin: included Tool changing chamber: separate Technical documentation Operating manual Omlat spare spindle included

Condition: ready for operation (used), Year of construction: 2004, operating hours: 19,357 h, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, controller model: Siemens Sinumerik 810D, spindle speed (max.): 9,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Number of axes: 4 Travel in X-axis: 1,600 mm Travel in Y-axis: 400 mm Travel in Z-axis: 400 mm A-axis: 360° × 0.001° A-axis speed: 20 rpm Spindle speed: 0–9,000 rpm Speed control: stepless Tool interface: DIN 69871 SK40 Working feed rate: 5–28,000 mm/min Rapid traverse rate X/Y/Z-axis: 28,000 mm/min Table design: Bridge table with 4 sides Table length: 1,800 mm Table width: 113 mm Table load capacity: approx. 150 kg Magazine design: Chain magazine Magazine capacity: 44 Max. tool diameter: approx. 70 mm Max. tool diameter with free adjacent positions: approx. 200 mm Max. tool length: approx. 240 mm Max. tool weight: 5 kg Max. total weight of tool magazine: approx. 200 kg Tool change time: approx. 8 s Kjdpfxjz Izdhs Akpsnc MACHINE DETAILS Control system: Siemens Sinumerik 810D Total power consumption: 14 kW Dimensions & Weight Dimensions (L x W): approx. 6,500 x 3,500 mm Machine weight: approx. 9,000 kg Operating hours: 19,357 h EQUIPMENT Second milling spindle Exchangeable milling spindle Coolant system (coolant tank: approx. 480 l) Internal cooling External cooling Clefil RBF-E100 unit (coolant pressure: 20 bar) Clamping system Hydraulic clamping options in the machining area Pneumatic clamping options in the machining area Römheld hydraulic unit (max. hydraulic pressure: 500 bar) Additional equipment Chip conveyor Coolant nozzle in the machining area Enclosed work area enclosure according to UVV Automatic measuring probe RWP20.00 Various SK40 tool interfaces Technical documentation Layout plan

Condition: used, functionality: limited functionality, Year of construction: 2018, operating hours: 16,914 h, load capacity: 4,000 kg, lifting height: 4,040 mm, fuel type: gas, mast type: duplex, construction height: 2,855 mm, empty load weight: 6,300 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Lifting height: 4,040 mm Load capacity: 4,000 kg Load center: 450 mm Fork width: 150 mm Fork thickness: 50 mm Fork length: 950 mm Fork carriage width: 1,350 mm MACHINE DETAILS Mast type: Duplex Drive type: Internal combustion engine Power: 42 kW Speed class: 15 ISO class: ISO class 3 = 2,500–4,999 kg Front tires Tire type: Non-marking Outer diameter: 450 mm Tire width: 200 mm Tire condition: 0–20 % Rear tires Tire type: Non-marking Outer diameter: 680 mm Tire width: 255 mm Kjdpfx Asz Hvmnekpsnc Tire condition: 0–20 % Battery voltage: 12 V Battery type: Starter Battery year of manufacture: 2018 Unladen weight: 6,300 kg Overall length: 2,190 mm Overall width: 2,050 mm Operating hours: 16,914 h EQUIPMENT 3rd valve Rear work light Front work light Heater Full cab Air conditioning CE certificate Non-marking tires Seat heating 3-wheel design Seat Two-way catalytic converter 55-liter gas tank with indicator Blue Spot Large alternator, 90 A Air-suspended seat Footwell heater Note: The rear wheel motor is leaking.

Condition: ready for operation (used), Year of construction: 2024, functionality: fully functional, grinding width: 1,350 mm, overall weight: 2,500 kg, grinding height: 200 mm, The machine is equipped with the following processing units (further details can be found in the attached document): 1. Contact roller unit (250 mm diameter / cutting speed 18 m/sec / sanding belt 1370 x 2620 mm) 1. Sanding roller in grooved steel design 2. Contact roller unit (250 mm diameter / cutting speed 18 m/sec / sanding belt 1370 x 2620 mm) 2. Sanding roller in grooved steel design 3. Contact roller unit (250 mm diameter / cutting speed 18 m/sec / sanding belt 1370 x 2620 mm) 3. Sanding roller, 85 Shore Kodpfx Akoz Hxnbspenc TECHNICAL DETAILS Sanding height: 3 - 200 mm Sanding width: 1,350 mm Sanding belt dimensions: 1,370 mm x 2,620 mm Feed speed: 2.8 - 20 m/min MACHINE DETAILS Extraction connection: 3 x 200 mm Motor power: 18.5 kW (25.0 HP) Motor voltage: 50/60 Hz Electrics: 3x400V 50Hz CE version Vacuum table with blower: 4 kW (5.5 HP) Reversing function: 3 Weight: 2,500 kg EQUIPMENT Feed table with electric height adjustment 3 motors: 18.5 kW (25 HP) each with SD start sanding belt brake Touch screen control with color display Additional extraction connection Note: The machine is delivered without a power cable. The electrical connection must be provided on site.

Condition: good (used), Year of construction: 2016, machine/vehicle number: 302.11.021.16, functionality: fully functional, operating hours: 573 h, power: 12 kW (16.32 HP), input voltage: 400 V, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,670 mm, travel distance Z-axis: 500 mm, workpiece length (max.): 3,300 mm, workpiece width (max.): 1,250 mm, workpiece height (max.): 150 mm, number of axes: 4, number of slots in tool magazine: 12, For sale is our FORMAT4 profit H200 13.33, manufactured in 2016. The CNC machine was primarily used in our carpentry shop for furniture and interior design and has relatively few operating hours. Equipment includes: * 4-axis CNC * Additional swivel unit * Tool changer * Console table with vacuum clamps * Vacuum pump included * Operator station incl. PC and handheld device * Includes tool set * Only 572 operating hours The machine is being sold due to the closure of our carpentry shop for health reasons. It is currently connected and ready for operation and can be inspected and tested by appointment. Location: 48308 Senden Kodpfx Aksz Imtnopjnc Dismantling, loading, and transport are the responsibility of the buyer and will be carried out at their own expense. Price: €37,000.00 net, negotiable / €44,030.00 gross, including 19% VAT. An invoice with VAT will, of course, be issued.

Condition: excellent (used), Year of construction: 2007, machine/vehicle number: 5192, functionality: fully functional, operating hours: 812 h, input voltage: 400 V, input current: 9 A, input frequency: 50 Hz, type of input current: DC, workpiece height (max.): 40 mm, height adjustment type: mechanical, feed rate X-axis: 4 m/min, actuation type: electric, total height: 1,620 mm, total length: 3,640 mm, total width: 980 mm, overall weight: 850 kg, Equipment: CE marking, documentation/manual, We offer this very well-maintained BI-MATIC 4.5 D.Y.T.S. edge banding machine, manufactured in 2007. Knodpfx Aks Aarnuopsc Manufacturer: BI-MATIC Model: 4.5 D.Y.T.S. Serial number: 5192 Year of manufacture: 2007 Voltage: 400 V Frequency: 50 Hz Current: 9 A Weight: 850 kg Pressure: 6 bar Operating hours: 6447 m Hot melt adhesive Units: - Gluing unit - Flush trimming units - Radius trimming units - Corner rounding units - Buffing units The units can be activated or deactivated separately. - Industrial design for precise edge processing - Integrated control panel with display - Emergency stop switch for increased safety - Robust housing in a neutral gray color - Feeding system for the edge strips The machine is in good visual condition, as can be seen in the pictures. It provides a solid basis for clean results in furniture manufacturing or interior design. If you have any questions about this machine, please do not hesitate to contact me. If you have any further questions or require more information, please send us a message or call us.

Year of construction: 2011, condition: ready for operation (used), functionality: fully functional, conveyor belt length: 4,000 mm, conveyor belt width: 600 mm, machine/vehicle number: 3002097/2, TECHNICAL DETAILS Temperature range: Ambient temperature to -110 °C Design: Stainless steel mesh belt Belt length: 4,000 mm Belt width: 600 mm MACHINE DETAILS Power supply: 3-phase Kedjz I Ti Aepfx Akponc EQUIPMENT Stainless steel mesh belt Continuous conveyor belt system Suitable for integration into continuous hardening systems

Condition: excellent (used), A robust industrial machine of German manufacture, Walther Trowal, model DLT 4, year 1980. This device is designed for surface treatment of metal, aluminum, or plastic parts – the trowalizing process (deburring, edge rounding, polishing, cleaning). A classic drum design – reliable, massive, and durable, typical of “West Germany” production. Technical data: • Model: DLT 4 • Manufacturer: Carl Kurt Walther GmbH & Co. KG, Wuppertal-Vohwinkel (West Germany) • Year of manufacture: 1980 • Drive type: ZOD71N 10 • Motor power: 0.38 kW • Power supply: 380 V / 50 Hz • Rotational speed: 31 / 61 rpm • Range: 3.5 – 7 rpm • Drum diameter: Ø 70 cm • Working length: approx. 80 cm • Net weight: 825 kg Condition description: • The machine is complete, and the drum rotates smoothly and evenly. • Perforation and interior are in good condition. • No signs of cracks or structural damage. • Requires electrical connection and possibly a service inspection. • Ideal for a tool shop, machining facility, or production line. Applications: • Deburring and cleaning parts after machining. • Polishing metal or aluminum components. • Processing screws, bushings, stamped parts, castings, and precision parts. Condition: used, solid, classic Walther Trowal design – requires minor refurbishment or is ready for immediate use. Kjdpfxez Slhuo Akpenc

Condition: like new (used), Year of construction: 2024, functionality: fully functional, cutting length (max.): 3,600 mm, overall weight: 14,000 kg, Veneer stack cutting machine / Veneer shears with 4 knives Manufacturer: Monguzzi (Fisher+Rückle) Type: AFV-42-3600 Year of manufacture: 2024 Hydraulic veneer shears with 4 knives for trimming and edging veneer stacks Typical applications: Veneer mill, veneer trade, veneer cutting, furniture and interior design with solid wood veneer Cutting range: Cutting length approx. 3600 mm 4 knives (2 upper and 2 lower knives), individually selectable Hydraulic pressure beam with 2 cylinders Hydraulic pressure switchable 45 bar / 90 bar Axes and drives: Positioning axes X and X2 (left / right) with stepper motor control Axis Y with frequency inverter 1.5 kW and brake Register adjustment with frequency inverter 0.75 kW and brake Register adjustment also via foot pedal Conveyor belt Line laser Hydraulics: Hydraulic unit with tank capacity 300 l Proportional valve Filter monitoring (contamination indicator) Control: PLC control with touch panel (esaware) Manual operation, automatic cutting, parameters, diagnostics, alarm history, programming Control panel with push buttons and emergency stop Safety: Emergency stop safety relay Pilz PNOZ X3 Light curtain with safety module Datalogic SE-SR2 Two-hand operation Electrical connection: 400 V, 50 Hz, 3P + PE Current consumption approx. 22 A Fuse 25 A Control voltage 24 V DC Basic concept: - Veneer stack cutting machine with 4 hydraulically operated knives - Pressure beam for fixing the veneer stack during cutting - NC positioning via the X, X2 and Y axes - Waste flaps for scrap - CE declaration of conformity according to Machinery Directive 2006/42/EC available, as well as documentation and circuit diagrams available Knjdpfx Aez I Tipekpsc Weight approx. 14,000 kg

Year of construction: 2012, condition: used, This listing is for a Haier ULT Ultra Low Freezer. The unit is in full working condition and is ready for immediate release. Overview: Haier Biomedical offers a range of ultra-low temperature (ULT) freezers specifically designed for the secure and long-term storage of sensitive biological products. These include viruses, germs, erythrocytes, leucocytes, and cutis. The units are ideal for hospitals, research institutions, and laboratories. Key Features: Reliable Performance: Cabinet temperature can reach –86 ℃, with temperature uniformity within 6 ℃ (or 5 ℃ for model WD-86L728J). Energy Saving: Four independent inner doors and a four-layer sealing structure ensure excellent heat insulation, reducing energy consumption. Power consumption for model WD-86L728J is only 10.5 kWh/day. Highly efficient cooling fans and compressors combined with hydrocarbon refrigerants provide significant energy savings and long-term sample security. Low Noise Operation: Innovative refrigeration system design with quiet fans and compressors minimizes noise during operation. Secure Storage: Each unit features a lockable handle with a unique key specific to that unit. Additional padlock space enhances sample security. Drawer System: Multi-layer drawer system makes it easy to store and sort samples efficiently. Pressure Equalisation Port: Heated port prevents icing on the vent and allows users to reopen the main door soon after accessing the freezer. USB Interface: Enables users to download historical temperature data for compliance and auditing purposes. Alarm Functions: Multi-level audible and visual alarms include alerts for: High/low temperature Sensor error Power failure High ambient temperature Clean filter Door ajar Temperature Control: Temperature range from –86 ℃ to –40 ℃, adjustable in 1 ℃ increments, ensuring optimal storage conditions. Choice of Models: Models available with stainless steel interiors for added durability. Adjustable and Mobile Design: Adjustable feet at the front and castors at the back ensure stability and mobility. Additional Features: Energy Efficiency: Freezers utilize advanced insulation and hydrocarbon refrigerants for reduced energy consumption and environmental impact. TwinCool Technology (on select models): Two independent refrigeration systems provide continuous operation and sample protection even if one system fails. User-Friendly Interface: Kodjxxx Hwepfx Akponc Equipped with large LED displays or touchscreen interfaces for real-time monitoring of cabinet temperature, set temperature, ambient temperature, and input voltage. Applications: Haier’s ULT freezers are suitable for storing a wide range of biological materials in healthcare, clinical, and research environments. Their reliability, security features, and energy efficiency make them a trusted choice for safeguarding valuable samples.

Condition: used, This listing is for a Thermo Scientific Heratherm IMH400-S Incubator. The unit is in full working condition and ready for immediate use. Advanced gravity convection technology ensures stable temperatures. Power-On Verified. The Thermo Scientific Heratherm IMH400-S is a high-performance microbiological incubator designed for delicate samples. It features a stainless steel interior, intuitive interface, and exceptional temperature uniformity. Ideal for research and clinical labs requiring reliability and precision. Transparency Report and Technical Audit: • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. • Integrity: 100% Original Parts (Non-Refurbished) • Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Knjdexzh H Eopfx Akpoc Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory.

Condition: used, Year of construction: 2019, operating hours: 169 h, functionality: fully functional, working width: 900 mm, overall weight: 957 kg, tank capacity: 150 l, total height: 1,410 mm, total width: 1,080 mm, total length: 1,790 mm, water tank capacity: 150 l, This used B150 R Bp ride-on scrubber-dryer from Kärcher (year of manufacture: 2019 | operating hours: 169) has just been serviced in our in-house workshop. Ksdps Aa Na Isfx Akpjnc It has not only been visually refurbished but also technically overhauled. It is equipped with new disc brushes and new, maintenance-free gel batteries. The Kärcher B150 is very maneuverable due to its compact and narrow design, and it can reach even the most difficult-to-access interior areas. Thanks to the eco!efficiency setting, water/energy consumption and noise levels can be significantly reduced. The machine is equipped with two disc brushes. The brush speed can be adjusted as desired using the FACT function. Thanks to the detergent dosing system (DOSE), the cleaning agent can be dosed precisely and evenly - adjustable from 0 to 3%. The cleaning agent can also be changed without emptying the fresh water tank. Color-coded controls and EASY-Operation switches make operation considerably easier. All settings are made via the large display. Hygienic and easy cleaning of the dirty water tank is possible thanks to the tank flushing system. The Auto-Fill function provides easy and time-saving filling of the fresh water tank. Technical data: Working width brushes: 900 mm Working width vacuuming: 1180 mm Tank fresh/dirty water: 150/150 l Permissible total weight: 957 kg

Condition: used, Used scaffolding planks – robust appearance and versatile applications Used wooden scaffolding planks sourced from professional construction projects. Due to use and exposure to the elements, the planks have a characteristic grey colour and robust appearance. Kedpfe Aaw D Ijx Akpjnc Ideal for both construction applications and for making furniture and interior design projects. 🔧 Specifications Material: Wood Condition: Used Appearance: Weathered and robust Customization: Can be cut to the desired length Available lengths: 5.00 m ✅ Advantages Characteristic used appearance Suitable for furniture and interior design projects Versatile applications Available in various lengths Can be cut to size Ample stock available Application Suitable for scaffolding construction, furniture, tables, benches, wall finishing and other projects where a robust and used wood look is desired.

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Rear doors Equipment: - Welded frame - 6 lashing points - Multiplex walls Net: €6,147.06 / Gross: €7,315.00 Article number: SPH227331818.02 Technical data: • Brand: Hapert Trailers • Model: Sapphire H-2 • Vehicle type: Box trailer • Vehicle condition: New • First registration: No first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (L x W x H): 331 x 176 x 180 cm • External dimensions (L x W x H): 469 x 184 x 247 cm • Loading height of the floor: 64 cm • Permissible total weight: 2,700 kg • Unladen weight: 744 kg • Payload: 1,956 kg • Chassis: High loader (wheels under the body) • Tires: 195/50R13C • Suspension: KNOTT rubber spring axle • Support wheel: Yes, automatic, 500 kg • 100km/h approval: Optional, can be retrofitted DESCRIPTION • Wooden floor and walls made of multiplex • Reinforced, sturdily screwed V-drawbar • Very stable steel frame, welded • Frame completely hot-dip galvanized • Many cross members, resulting in high point load capacity • Longitudinal members continuous • Frame is very torsion-resistant due to its stable design • 6 lashing eyes recessed inside the side frame (1000 DaN/kg), TÜV certified! • Battery - interior light, for free positioning • 2-wing rear door with stainless steel rotary latch, lockable • 2 maneuvering handles at the front Knjdpfx Akozu N Rfspsc • Maintenance-free rubber spring axles from KNOTT • Reverse automatic • KNOTT overrun device and parking brake • Very stable, screwed V-drawbar • 13-pin connector • Reversing light • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Automatic support wheel in the center _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to request any specific requirements! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer plates (Germany) can be provided. - Export plates including customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - authorized dealer & repair - workshop for over 30 years. - Errors, omissions and prior sale excepted -

Condition: used, empty load weight: 7,400 kg, axle configuration: 3 axles, first registration: 04/2021, tire size: 385-65 R22.5-385-65 R22.5, Year of construction: 2021, ref: F0968481 Equipment: * Air connection: Red/Yellow coupling, * Electrical connection: 1 x 15-pin, * ABS, * EBS, * Railway coding, * Device for railway loading, * Side impact protection, * Rear door design: Rear portal doors, * Locking rods on rear doors: 4, * Floor: Plywood floor, * Double-deck system, * Double-deck beams: 23 VIN: WKESD00000968481 Tire size: 385-65 R22.5 Interior length: 13.62 m Width: 2.55 m Interior width: 2.47 m Ksdpj Aa A Tbefx Akpjnc Height: 3.96 m Interior height: 2.67 m

Year of construction: 2001, condition: used, machine/vehicle number: 2001/1558B, Brand: PANEM Model: AC24B Year: 2001 Serial number: 2001/1558 B Power source: Electric Power supply: 230 V single-phase Frequency: 50 Hz Electrical power: 1.1 kW Capacity: 24 trays / grids Tray sizes: 400 × 800 / 400 × 600 mm Number of access doors: 2 Digital electronic control panel on the front Humidity generation via a steam generator Interior: Stainless steel Front: Stainless steel Door: Stainless steel Dimensions: 635 × 1200 × 2250 mm Controlled fermentation Used PANEM AC24B fermentation cabinet 400 x 800 – 24 trays and 2 access doors General presentation The PANEM AC24B fermentation cabinet is equipment designed for controlled fermentation in bakeries. This used unit, manufactured in 2001, offers a capacity of 24 trays in the 400 x 800 mm format and a two-door configuration. With its dimensions of 635 x 1200 x 2250 mm, this controlled proofing cabinet combines a compact width with a capacity suitable for production organized on trays. The available documentation also indicates compatibility with 400 x 600 mm trays. Why this model stands out The PANEM AC24B brings together several useful features in a bakery environment: an enclosure with a stainless steel interior, a stainless steel front and door, humidity generation via a steam generator, and a digital electronic control panel located on the front. Its 230 V single-phase power supply and indicated electrical power of 1.1 kW are important data points for verifying its compatibility with the laboratory's electrical installation before it is put into service. Knodpjz Ar A Hofx Akpsc Key advantages Capacity of 24 trays suitable for working with 400 x 800 mm trays Two-door configuration to structure access to the enclosure Humidity generation ensured by a steam generator Digital electronic control panel accessible on the front Stainless steel interior suitable for the maintenance requirements of a production environment 230 V single-phase, 50 Hz power supply Detailed technical specifications

Condition: new, New scaffolding planks – strong, versatile, and available in custom sizes New wooden scaffolding planks suitable for professional use, custom-made, and for various construction and interior design applications. The planks are available from stock and can be cut to the desired length upon request. Suitable for, among other things, scaffolding construction, flooring, furniture, and other wooden structures. Kodpfx Ako Aaw Dbepjnc Specifications: Material: Wood Condition: New Customization: Can be cut to desired length Available lengths: 5.00 m Advantages: New and clean appearance Versatile Suitable for professional use Available in various lengths Can be cut to size Readily available in stock Application: Suitable for scaffolding construction, furniture, flooring, interior design projects, and various other wooden structures.

Condition: used, functionality: fully functional, Year of construction: 2007, operating hours: 8,478 h, load capacity: 1,800 kg, lifting height: 3,275 mm, free lift: 1,600 mm, fuel type: electric, mast type: duplex, construction height: 2,160 mm, fork carriage width: 980 mm, fork length: 1,200 mm, drive type: Elektro, Electric 3-wheel forklift Load center: 500 ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Duplex Transmission: Electromechanical Condition: Ready for use and fully functional Technical condition: very good Front tire type: Superelastic Front tire size: 200/50-10 Rear tire type: Superelastic Rear tire size: 15x4/5-8 Battery voltage: 48V Knedpfez Dyliox Akpjc Battery capacity: 625Ah Battery manufacturer: AVB Battery type: PzS Battery year of manufacture: 2018 Description: In addition to this unit, we offer other forklifts and warehouse equipment. Our equipment is workshop-tested and compliant with FEM 4.004. Please contact us by email or by phone. You can also find us at hsr-gabelstapler. We also purchase your used equipment, even if you do not buy a vehicle from us. Lease purchase and financing options are available upon request at favorable terms. We will gladly provide you with competent and detailed advice on our vehicles. Side shifter, 3rd valve, 4th valve, rear work light, front work light, roof protection, windshield, full free lift, interior mirror, single-pedal operation, 3-wheel design, seat, Multi-lever control

Condition: used, mileage: 374,800 km, power: 130 kW (176.75 HP), first registration: 09/2018, fuel type: diesel, overall weight: 8,600 kg, axle configuration: 2 axles, gearing type: automatic, emission class: euro6, total length: 8,150 mm, total width: 2,550 mm, total height: 3,700 mm, loading space length: 6,248 mm, loading space width: 2,488 mm, loading space height: 2,440 mm, Year of construction: 2018, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, MERCEDES BENZ ATEGO 818 – AUXILIARY HEATER – 1.5 T TAILGATE LIFT – AIR CONDITIONING ----VEHICLE HISTORY 1st OWNER GERMAN VEHICLE VIDEO AVAILABLE UPON REQUEST ----Vehicle Mercedes-Benz Atego * Type: 967PKX2 * Vehicle Class: N2 * Body: Truck with tarpaulin and side rails with tailgate lift * First Registration: 10.09.2018 * Manufacturer: Daimler / Mercedes-Benz * Mileage: 374,800 km * Engine Hours: 8,230 h * 2 Axles * 4 Wheels * Right-hand drive: No Engine & Performance Diesel engine * 4-cylinder in-line engine * Displacement: 5,132 cm³ * Power: 130 kW / approx. 177 hp * Rated speed: 1,800 rpm * Engine designation: OM934LA.6-7 * Self-igniting engine / four-stroke * Single fuel operation * Emission standard: Euro VI * AdBlue * Automatic / automated manual transmission Weights Permissible total weight: 8,600 kg * Technically permissible total mass of the vehicle combination: 12,100 kg * Vehicle mass in running order: 4,007 kg * Minimum mass after completion: 3,680 kg * Front axle load: 3,600 kg * Rear axle load: 5,700 kg * Unbraked trailer load: 750 kg Dimensions Vehicle length: 7,779 mm * Vehicle width: 2,600 mm * Wheelbase: 4,220 mm * Max. rear overhang: 2,179 mm Interior dimensions / Loading area Length: 6,248 mm * Width: 2,488 mm * Height: 2,440 mm Tires & Axles Axle 1 / Front axle: * Tires: 235/75 R17,5 * Leaf spring suspension * Axle load: 3,600 kg * Axle 2 / Rear axle: * Tires: 235/75 R17,5 * Twin tires * Air suspension * Axle load: 5,700 kg * Tire specification front axle: 235/75 R17,5 128/-- G * Tire specification rear axle: 235/75 R17,5 ---/121 G * Rims: 17.5 × 6.75 Body Tarpaulin and side rails * Side tarpaulins / curtains * PR + PL * Tailgate lift / loading platform * BÄR Tailgate lift * Load capacity tailgate lift: 1,500 kg * Vehicle classified as N2 truck Equipment Auxiliary heater * Seat heating * Air conditioning * Electric windows * Heated side mirrors * Manual sunroof * FleetBoard EcoSupport * Lane keeping assist * ACC (Adaptive Cruise Control) * Distance warning * Hill start assist Other technical data Top speed: 90 km/h * Fuel: Diesel * AdBlue * Noise level idling: 87 dB(A) at 1,350 rpm * Driving noise: 77 dB(A) * Trailer brake connection: No Registration / Documents German registration * First registration: 10.09.2018 * EC Certificate of Conformity available * COC issued on 27.06.2018 * Emission class: Euro VI Knsdpfx Ako Abnf Sepoc ----EXPORT / NOTE EXPORT SALES ONLY WITH DEPOSIT MIN. €500 - €2,000 A DEPOSIT OF AT LEAST €500.00 / €1,000.00 IS REQUIRED FOR SALES IN EU & THIRD COUNTRIES. EXPORT REGISTRATION POSSIBLE IN 10 MINUTES (AUTHORIZED EXPORTER). 5 DAYS, 15 DAYS, 30 DAYS REGISTRATION AS WELL AS 15 DAYS AUSTRIAN REGISTRATION POSSIBLE. VEHICLE RESERVATIONS ARE ONLY ACCEPTED VIA THE E-MAIL FUNCTION. VERBAL RESERVATIONS ARE NOT VALID. SUBJECT TO CHANGES, ERRORS AND PRIOR SALE.

Condition: used, pure engineering Type: pureGMC18 System for manual weighing processes Climate chamber for highly sensitive weighing processes with ultra-microbalances. Kjdpfjzd Ukijx Akpenc The weighing chamber is specifically designed for the gravimetric determination of particulate emissions in exhaust gas analysis and meets the regulatory requirements of environmental authorities. All necessary climate control components are integrated. In combination with the particulate filter, a contamination-free and precisely conditioned weighing and storage area for the filters is ensured. Features: Precise temperature and humidity control Weather station (p, t, h) for buoyancy correction Dew point mirror (optional) Vibration-isolated granite for low-vibration mounting of an ultra-microbalance Ionization device against static charging Flow protection for shielding the weighing cell Touch panel for intuitive operation Ethernet interface for process data exchange Interior with power outlets, grounding bolt Advantages: Meets regulatory requirements for particle weighing according to: ECE-R83 (light duty), ECE-R49 (heavy duty), EPA1065 (U.S. Environmental Protection Agency) Tested, ready-to-connect design Designation: pureGMC18 Temperature: 22°C ± 1 K Humidity: 45% RH ± 3% Dimensions W/D/H: 1,800/800/1,980 mm Cleanroom class 5 (ISO14644-1) Voltage supply: 400V, 15A 50/60 Hz Weight: 650 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Year of construction: 2021, UV curing oven in operational condition. Possibility for 2 units. Knsdpfx Aksy Nzb Ujpjc Ask for a quotation!