Used heating & cooling units for sale (160)

Condition: used, Manufacturer : SISE Model : 95E27 DC95 Type: Hot water heat controller Heating capacity: 28.1 kW Geljy Ufitehccqpsiu Cooling type: 60 kW plate heat exchanger Recirculation: immersed pump Maximum temperature: water 95°C Process inlet and outlet connection: 1¼" Technical file available

Year of construction: 2015, condition: excellent (used), The temperature control unit is for sale ;2015- the new price was 4995€ Medium : Water Functions - Function for self-optimizing temperature control - Function and fault displays - User-dependent and password-protected rights - Limit comparator (tolerance band monitoring of the actual value with alarm message) - Adjustable setpoint limit - Weekly timer - Automatic heating and cooling program - Freely selectable ramp function for temperature changes during heating and cooling - VNC server via Ethernet (enables complete operation and management from the PC) - 2nd temperature setpoint - Tool management (setpoints and control parameters can be be saved as a recipe) - Measured value recording for quality assurance (actual values can be be output to SD card with time stamp) Giolhem Dtm Aoccqpeu - Electronic level monitoring with dry run protection - Automatic filling and replenishment with leakage and level function monitoring level function monitoring - Automatic venting Monitoring/safety - Short-circuit-proof controller and control outputs - Temperature sensor in circulating medium flow and return - Safety temperature limiter to prevent overheating and Safety valves against overpressure - Contactless heating control with solid state relay - Safety temperature reduction when switching off - Acoustic and visual warning signal with symbol and text text on the touch screen- Symmetrical mains load with three-phase drive and three-phase heating elements three-phase current heating rods - 3-fold safety shutdown of the heater - Reversible circuit breakers and motor protection switch - Dirt trap in the cooling water supply Hydraulics - Continuous cooling via motor valve

Condition: used, Year of construction: 2015, machine/vehicle number: 663462, functionality: fully functional, Specification: Min./max. air pressure: 0.4/0.6 MPa; 4/6 bar Max. pressing force: 50 kN Total stroke: 150 mm Power stroke: 7 mm Type: STE341-7210 SF device Power: 0.5 kW Power supply: 230/3/50-60 V/A/Hz Gislhjwtgpxsccqpou Control voltage: 24 VDC Protection rating: IP54 Pre-fuse: 16 A The TOX Pressotechnik hydropneumatic press EEB 008.061.A.001 is a versatile and powerful solution for precise forming and assembly operations in industrial manufacturing. It combines the advantages of hydraulics and pneumatics to ensure consistent force transmission and high accuracy. The robust design ensures long service life and reliable operation, while the user-friendly control system enables easy handling.

Condition: used, circulating medium 25 °C Cooling capacity 10 kW Rated power supply 5,45 kW Operating/control voltage 400-415/24 V / 50 Hz Rated current/max. fuse 15,2 / 25 A The temperature control units are, in our assessment, in good used condition. The offer includes two units. Accessories, tools, and clamping devices shown are only included if Gjlhcezbc Hbocqpjiu specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Year of construction: 2008, condition: excellent (used), functionality: fully functional, PSG Hotrunner Controller Giolhccjza H Eleqpou 8 fases In very good condition Included 24-pin Cable

Year of construction: 2011, operating hours: 34,000 h, condition: used, functionality: fully functional, Two double-temperature control units from the company Single are for sale: Golhcezbx Rpscqpjiu Medium: Water Heating capacity: 9 kW per unit Cooling capacity: 20 kW per unit Mobile Interface: PT 100 sensor Alarm

Year of construction: 2025, condition: as good as new (ex-display), Air-cooled process chiller: R32 refrigerant Cooling capacity 72 kW at 7/12°C, internal P3 pump, internal 410 l tank, winter package down to -25°C ambient temperature for outdoor installation, includes variable-speed fans Large Dixell display with protective cover Gslhccef H A Eyeqpjiu

Year of construction: 2014, operating hours: 150 h, condition: as good as new (ex-display), The temperature control unit from GWK is for sale; it was only used at trade shows. I can gladly send you a description of the unit! Medium: Water Heating capacity: 9 kW Gielhceza U Dcocqpju Operating temperature: max. 160 degrees Celsius Cooling capacity: 40 kW Cooling: Heat exchanger Mobile

Year of construction: 2022, condition: excellent (used), Nolden hot runner controller (54) 16 channels, soft start, complete with cables + manual, 2022 Gielhccezcx Anjqpou

Condition: not inspected (used), Year of construction: 2014, Cooling capacity: 10.1 kW Gislhey Nif Ijccqpou Flow rate: 5,000 L/h Weight: 180 kg The unit is ready for immediate shipment and is available immediately!

Condition: used, Cooling unit, cooling water recooler, water chiller, chiller O. Hellwig Year of manufacture: approx. 1995 Golhccqspu R Ncjpeiu Cooling capacity: approx. 8 kW Rated power of cooling unit: 3 kW Refrigerant: R422D Water tank volume: approx. 35 liters Circulation pump flow rate: 40 liters/min Pump output: 0.63 kW Water connections: 1/2 inch Power supply: 380 Volt, 50 Hz - Temperature setting via rotary potentiometer Space requirement (L x W x H): 1100 x 750 x 140 mm Weight: 285 kg

Year of construction: 2013, condition: ready for operation (used), functionality: fully functional, The teco th 140 temperature control unit from GWK with indirect cooling is up for sale; it offers a wide range of features which I can provide upon request. The hose lines are also included. The unit will be inspected by GWK prior to delivery, with inspection costs already included in the sale price. Medium: Heat transfer oil, Marlotherm SH Heating capacity: 27 kW at up to 350°C Gjlhcsx Dcd Rscqpjiu Cooling capacity, indirect: 110 kW Pump: 150 l/min at max. 7 bar Cooling via bypass with 3-way motorized controller Shut-off valve on supply and return Connection for PT 100 sensor Internal drip tray Dimensions: L: 1320 mm, W: 570 mm, H: 1720 mm Weight: 410 kg

Condition: excellent (used), Spot welding tongs Dalex Type 3011/2 Throat depth 250 mm Gijlhccqsy Inwgspou Rated power 2.4 KVA 380 Volt

Condition: used, Year of construction: 2009, machine/vehicle number: 090924, Temperature control unit manufactured by Single, used and untested. The device is intended for applications in tool temperature control, injection molding, and industrial process engineering. It operates as a single-circuit system with an SBC control system. The medium used is water*; the maximum flow temperature is 30 °C. Heating output is not specified; pump performance is 28 l/min at 3.2 bar*. Year of manufacture is 2009, and the total weight is 105 kg. Gjlhccsy Su Efjqpsiu

Condition: used, machine/vehicle number: 0926292, Year of construction: 2009, Temperature control unit manufactured by Single, used and untested. The device is intended for applications in tool temperature control, injection molding, and industrial process engineering. It operates as a single-circuit system with an SBC control system. The medium used is water*; the maximum flow temperature is 30 °C. Heating output is not specified; pump performance is 28 l/min at 3.2 bar*. Year of manufacture is 2009, and the total weight is 105 kg. Gislhcey Su D Ujcqpju

Condition: used, machine/vehicle number: 462962, Temperature control unit from manufacturer Regloplas, used and untested. The unit is designed for applications in tool temperature control, injection molding, and industrial process technology. It operates as a single-circuit system with the RT 45 control system. Oil is used as the medium, with a maximum flow temperature of 250 °C. The heating capacity is 13.7 kW, and the pump capacity is 60 l/min at 3.5 bar*. Year of manufacture is not specified, total weight is 145 kg. Gielhcjy Su D Iecqpju

Condition: used, machine/vehicle number: 543105, Temperature control unit from manufacturer Regloplas, used and untested. The unit is suitable for mold temperature control, injection molding, and industrial process applications. It operates as a single-circuit system equipped with the RT 45 control system. The heat transfer medium is oil, with a maximum flow temperature of 300 °C. Heating power is 13.5 kW; pump capacity is 60 l/min at 3.5 bar*. Year of manufacture is not specified, total weight is 160 kg. Gelhcey Su Dnjcqpoiu

Condition: used, machine/vehicle number: 543109, Temperature control unit from manufacturer Regloplas, used and untested. The unit is suitable for mold temperature control, injection molding, and industrial process applications. It operates as a single-circuit system equipped with the RT 45 control system. The heat transfer medium is oil, with a maximum flow temperature of 300 °C. Heating power is 13.5 kW; pump capacity is 60 l/min at 3.5 bar*. Year of manufacture is not specified, total weight is 160 kg. Gelhcey Su Dhjcqpsiu

Condition: used, Year of construction: 2002, machine/vehicle number: 802287/01, Temperature control unit from manufacturer Remak, used and untested. This unit is designed for applications in tool temperature control, injection molding, and industrial process engineering. It operates as a single-circuit system with the REMAK control system. Water* is used as the medium, with a maximum supply temperature of 95 °C*. Heating capacity is 13.5 kW*, and pump performance is 66 l/min & 4.0 bar*. Year of manufacture: 2002, total weight: 90 kg. Giolsy Su Dbjhccqpeu

Condition: used, Year of construction: 2011, machine/vehicle number: 408529.10.000/01, Temperature control unit manufactured by Hahn Automation, used and untested. Designed for applications in tool temperature control, injection molding, and industrial process engineering. Operates as a single-circuit system with REMAK control system. The working medium is water*, with a maximum flow temperature of 95 °C*. Heating capacity is 27 kW, pump capacity is 60 l/min at 4.5 bar*. Year of manufacture: 2010, total weight: 130 kg. Gslhccqjy Su A Repeiu

Condition: used, Year of construction: 2011, machine/vehicle number: 253321-01-03, Temperature control unit by gwk, pre-owned and untested. Designed for mold temperature control, injection molding, and industrial process technology applications. Operates as a single-circuit system with the Logotherm control system. The unit uses water* as the heat transfer medium, with a maximum supply temperature of 30 °C*. Heating capacity is not specified; pump capacity is 35 l/min at 3.5 bar*. Year of manufacture: 2011. Total weight: 200 kg. Gioloy Su Aqehccqpeu

Condition: used, Year of construction: 2011, machine/vehicle number: 253321-01-04, Temperature control unit by gwk, used and untested. Designed for tool temperature regulation, injection molding, and industrial process engineering. Operates as a single-circuit system with Logotherm control. Uses water* as the medium, with a maximum supply temperature of 30 °C. Heating capacity not specified, pump delivers 35 l/min at 3.5 bar*. Year of manufacture: 2011. Total weight: 200 kg. Gslhcsy Su Adjcqpeiu

Condition: used, Year of construction: 2013, machine/vehicle number: 18575 / 2013, Temperature control unit from manufacturer Robamat, used and untested. The unit is designed for application in tool temperature regulation, injection molding, and industrial process engineering. It operates as a dual-circuit system with the Thermocast 4212 control system. Oil* is used as the medium, with a maximum supply temperature of 320 °C. Heating capacity is 2x 34 kW*, pump output is 75 l/min at 5.0 bar*. Year of manufacture: 2013. Total weight: 350 kg. Giolhcjy Suz Tocqpou

Condition: used, Year of construction: 2007, machine/vehicle number: 17037 / 2007, Temperature control unit from Robamat, used and untested. The unit is designed for applications in tool temperature control, injection molding, as well as industrial process engineering. It operates as a two-circuit system with the Thermocast 4212 control unit. Oil* is used as the medium, with a maximum supply temperature of 320 °C. Heating capacity is 2x 34 kW*, pump output is 75 l/min and 5.0 bar*. Year of manufacture: 2007, total weight: 350 kg. Gjlhoy Suz Hsccqpeiu

Condition: used, Year of construction: 1999, machine/vehicle number: 14490/99, Temperature control unit by Robamat, used and untested. Designed for mold temperature control, injection molding, and industrial process engineering applications. The unit features a dual-circuit system with a Thermocast 4212 control system and two µP103 Mega control units. Operating medium: oil*. Maximum flow temperature: 320 °C. Heating capacity: 2x 34 kW*. Pump output: 75 l/min at 5.0 bar*. Year of manufacture: 1999. Total weight: 350 kg. Gjlhey Surfjccqpjiu