Used beverage production for sale (1,128)

Condition: used, Year of construction: 2007, functionality: fully functional, Tetra Pak Pressvatic 1+2 Pre Press & Block Format System Gedpfxezy Rxhe Aciokb 1.8T/hr

Condition: good (used), 1 x Capping Machine, with lid feed and outfeed table. Suitable Cap Types Screw Cap, Jar, Foamer, Dropper, pre-formed ROPP Cap Diameters 18 – 70mm (extended to 90mm) Bottle Height 30 – 300mm Gksdpfx Acszzxd Ioisb Power Supply: AC220V/110V 50-60HZ Working Speed: 20-60 /min (depending on bottle and cap size and shape) Working Air Pressure: 0.4-0.6MPa Dimensions: Approx 1930(L)x740(W) x1600mm(H) *Video available on request*

Condition: used, Year of construction: 2023, Overview This Robopac Genesis Futura HS pallet winder was built in 2023. It has under 500 operating hours - technically close to new. The rotating ring carries the pre-stretch carriage around the stationary pallet for high throughput without moving the load (see Capacity below). Delivered as a stand-alone unit with integrated roller conveyor, prepared for line integration over Ethernet TCP/IP. Technical data - Manufacturer: Robopac - Model: Genesis Futura HS - Year of manufacture: 2023 - Machine type: automatic rotating-ring stretch wrapper (pallet winder) - Operating hours: less than 500 h - Capacity: up to 92 pallets/h (13 wraps, H 1,000 mm), 77 pallets/h (17 wraps, H 1,600 mm), 70 pallets/h (19 wraps, H 2,000 mm) - Pallet size: 800 x 1,200 mm - Load height: 1,000 - 2,000 mm (incl. pallet) - Load weight: 100 - 1,200 kg - Conveyor height: approx. 550 mm; speed 15 m/min - Machine height: approx. 4,862 mm; hall height from 7,000 mm - Pre-stretch: SCV-B carriage, electronically adjustable 150 - 400 % - Stretch film: LDPE / LLDPE, 17 - 23 µm, roll width 500 mm, max. diameter 250 mm, core 76 mm, max. weight 20 kg - Control: Siemens SIMATIC S7-1200 PLC, Siemens TP700 7" colour touch panel - Wrapping programs: 15 (expandable to 64), 12 steps/recipe, 4 password-protected access levels - Power supply: 400 V / 50 Hz, TN-S, control voltage 24 VDC - Compressed air: 6 bar, dry, oil-free - Documentation and HMI languages: German / English Equipment - High-speed rotating ring: power transfer to the pre-stretch carriage via sliding contacts, Wi-Fi commands - Integrated roller conveyor with pneumatic pallet lifting station (SMC PL-D) - Automatic film clamping, cutting and wide-band sealing unit - Fixed vertical hold-down (top press unit) stabilises the load during wrapping - Roping device gathers the film web from below - Photocell for automatic pallet-height reading, plus a pre-scan photocell with 3,800 mm reflector mast Gkodpfx Ajzzz R Deciob - Inverter-controlled IE3 motors, SEW geared, IP55, FESTO pneumatic components, SICK photocells - Siemens Scalance S615 VPN / firewall router and Scalance XB005 Ethernet switch, TCP/IP link to up-/downstream machines - Safety: Reer Safegate SMPO 1803 light curtain, fenced enclosure, dynamic fall protection on the ring - Operator panel separate from the main switch cabinet, plus remote control unit with emergency stop - R-Connect remote monitoring hardware: cloud portal for production data and teleservice - TPM package (centralised lubrication points, maintenance intervals on display), integrated HMI troubleshooting - Complete documentation on USB stick and in print: operating / maintenance manual, wiring / pneumatic diagrams, spare parts catalogue, layout Condition Used - almost as new, no visible production wear. Still installed and under power; inspection in operation on request. Sold without warranty. Availability Immediately. Location: Germany. Handed over dismantled and packed (EXW).

Condition: used, Year of construction: 2021, Overview This Robopac Helix 4 EVO pallet winder was built in 2021, with less than 500 operating hours - technically close to new. The arm carries the pre-stretch carriage around the stationary pallet, so the load itself is never turned - the configuration for unstable, fragile or heavy loads at high output (capacity below). Built as a stand-alone unit. Technical data - Manufacturer: Robopac - Model: Helix 4 EVO - Year of manufacture: 2021 - Machine type: automatic rotating-arm stretch wrapper (pallet winder) - Operating hours: less than 500 h - Capacity: 82 pallets/h (11 wraps, 1,000 mm H), 73 (15 wraps, 1,600 mm H), 64 (19 wraps, 2,000 mm H) - Wrapping cycle time: approx. 36.3 s at H 1,600 mm, 15 wraps (conveyor excluded) - Pallet sizes: 800 x 1,200 mm and 800 x 600 mm, centred on the conveyor - Load height: 1,000 - 2,000 mm incl. pallet; mechanical max. 2,550 mm incl. pallet and conveyor - Load weight: 100 - 1,200 kg - Conveyor speed: 15 m/min - Machine height: 4,721 mm; hall height from 7,000 mm - Pre-stretch: PGSA carriage, electronically adjustable 100 - 400 % - Stretch film: LDPE / LLDPE, 17 - 23 µm, roll width 500 mm, max. dia. 250 mm, core 76 mm, max. weight 16 kg - Control: Siemens SIMATIC S7-1500 PLC, TP700 7" colour touch panel - Wrapping programs: 15, expandable to 64, 12 control steps per recipe, 4 password-protected access levels - Power supply: 400 V / 50 Hz, TN-S, control voltage 24 VDC - Compressed air: 6 bar, dry and oil-free - Documentation and HMI languages: German / English / Italian Equipment - Rotating arm on a four-column steel structure, geared slewing ring with central lubrication - Patented PGSA pre-stretch carriage with load cell, film tension corrected at the corners, set from the display - Automatic film clamping, cutting and impulse-sealing unit, spring gripper with 300 mm horizontal stroke - Easy Lock tilting roller and roping device for narrowing the film web from below - Pantograph top press unit for load stabilisation during wrapping - Photocell for automatic pallet-height reading - Integrated roller conveyor, pallets loaded and unloaded by forklift Gkedpfx Acszzz Rdeieb - SEW IP55 geared motors for arm rotation and carriage lift, FESTO pneumatic components - Glazed enclosure with Sick M4000 light curtains, 30 mm resolution, 1,800 mm field height - Enlarged illuminated switch cabinet and a separate, independent operator panel - TPM package: centralised lubrication points, gauges with red/green rings, maintenance intervals on the display - Troubleshooting in the HMI with fault location and remedy - R-Connect remote connectivity with cloud portal for production data and teleservice - Documentation printed and on USB: manual, CE declaration, diagrams, spare parts catalogue, layout Condition Used - virtually new, dismantled and professionally packed for transport; photographs show it assembled before dismantling. Sold without warranty. Availability Immediately. Location: Germany. Handed over dismantled and packed (EXW).

Condition: used, Year of construction: 2020, Overview Krones Ergomodul modular container labeller. Containers run anticlockwise after the infeed in a frontal arrangement with two discharge starwheels. Finish RAL 9018 papyrus white in the wet-line section. Two docking positions at the carrousel, both in operation, accept the four labelling stations without tools, so cold-glue and self-adhesive labelling run on the same carrousel; height adjustment of the top part and each station is motorised with container type preselection. Technical data - Manufacturer: Krones - Model: Ergomodul - Year of manufacture: 2020 - Table pitch diameter: 1,200 mm Gkodpfx Acszzz N Hoisb - Rotary plates: 30 - Machine pitch: 125.6 mm - Main drive: controlled servo motor; Danfoss servo motors, container table - Cold-glue stations (2x): ERGOMATIC-CL, 8-shaft glue pallet carrousel, 8-section gripper cylinder d = 350 mm, unwinding length 40-130 mm, steel glue roller, integrated glue pump, gluing height 5-215 mm, housing stainless steel, AISI 304-similar - Self-adhesive stations (2x): AUTOCOL-TS 120, web speed 120 m/min, supply tolerance +/- 0.5 mm, four-axis stand (application height, container diameter, conicity, sloping position), two-reel holder with automatic splicing and end-of-reel detection, driven carrier-film rewinder, ionisation unit, reels up to 390 mm outer diameter, carrier film up to 150 mm - Container infeed: worm with servo drive; detects damaged and fallen-over containers - Container orientation: prepared for camera orientation at the carrousel (360-degree monitoring, one camera); electrical interface prepared, mechanical adjustment unit not installed - Coding: prepared for a laser coder at the carrousel, with laser guarding, safety switch, clock pulse, oil-free air supply - Conveyors: flat-top chain, 83.8 mm wide, stainless steel (AISI 304-similar); servo-driven infeed, PM-motor discharge, centralised frequency inverter control - Machine guarding: lifting doors at the carrousel (polycarbonate), hinged doors at the front table (tempered safety glass) - Pneumatics: Festo; Bosch-Aventics, Norgren Herion, SMC, Bürkert components - Electrical: 400/230 V, AC 3/N/PE, 50 Hz, 28 A full load, 50 A back-up fuse; UPS 400/230 V, 17 A - Media: 92.4 m³/h oil-free compressed air, 0.009 m³/h process water - Weight: approx. 10,600 kg total (carrousel 3,200 kg, front table 3,000 kg, 1,100 kg per cold-glue station, control cabinet 1,000 kg) Equipment - 2x ERGOMATIC-CL cold-glue labelling stations, interchangeable - 2x AUTOCOL-TS self-adhesive labelling stations, interchangeable - Stand-alone control cabinet with Krones iPanel operator terminal - Central lubrication (Lincoln progressive distributor with motor pump) - Ecopush rejection module - Handling parts set on trolleys The inspection unit (Checkmat) and the container coding device used with this labeller are not part of this machine. Condition Used, still installed and under power in an operating line; on-site inspection possible before purchase. Availability Available now. The machine is in Belgium and will be dismantled and moved to our location in Germany; dismantling, loading and transport quoted on request.

Condition: used, Year of construction: 2023, Overview This Krones Pressant Universal 1N is a container sweep-off depalletizer that lifts each container layer off the pallet stack and sweeps it onto the discharge table, while a separate handling module removes the layer pads and the empty pallets. The machine is built in Krones enviro design for reduced energy and media consumption. Operation is from a Krones touch terminal with a production dashboard and a separate control page for the pallet conveyor. Technical data - Manufacturer / model: Krones PRESSANT UNIVERSAL 1N - Machine type: container sweep-off depalletizer - Year of manufacture: 2023 - Application: depalletizing of glass bottles, several formats - Container throughput: 14,000 containers/h (machine setting) - Pallet format: flat pallets 1,200 x 1,000 mm - Container conveyor height: 1,300 mm - Sweep-off station: raised design for container heights above 320 mm, SEW servo drive - Discharge table: 90° connection, 3,600 mm table length, 15 steel conveyor chains, servo drive (SEW) - Lifting unit: servo drive (SEW), maintenance unit on the columns - Layer scanning: pneumatic - Layer centring: lateral and centring beam servo-motorised (SEW), pneumatic front flap - Stack fixing: lateral, motor-driven; pneumatic transfer plate - Packing material handling: 1 module with pivoted arm, suction gripper for layer pads and complete layers, vacuum ejector, pallet gripper (1 DIN size), motorised gripper frame rotation - Magazines: two magazine and stacking areas, free-standing chute for inverted trays - Central lubrication: Lincoln Quicklub, automatic pump - Pneumatics: Festo, minimum operating air pressure 5 bar, air connection G 1/2" - Power supply: 400 / 230 V, 3 Ph, 50 Hz, 57 A - Overall dimensions: depalletizer approx. 6,000 x 3,500 x H 5,620 mm; complete installation approx. 15,900 x 9,600 x H 5,620 mm - Finish: RAL 5013 cobalt blue columns, RAL 9018 papyrus white and RAL 7037 dusty grey machine parts - CE marked Scope of delivery - Krones PRESSANT UNIVERSAL 1N sweep-off depalletizer - Infeed roller conveyor, stainless steel rollers, roller width 1,350 mm, approx. 1,820 x 1,450 x 1,030 mm - Stainless steel platform with chain conveyor, approx. 5,000 x 2,500 x 1,680 mm Gsdpfx Aezzz Naecijkb - Krones PALCO pallet conveyor and Krones SYNCO container transport - Outfeed conveyors, stainless steel belts, belt widths 1,280 mm and 250 mm, approx. 5,200 x 1,700 x 1,420 mm and 5,700 x 500 x 1,420 mm - Krones operator terminal with production dashboard - Control cabinets with SEW servo drives, safety technology and central lubrication - Machine guarding with safety gates and locking pawl on the sweep-off station - OEM machine data sheet and dimension drawing Condition Used, technically complete. The machine is still installed and under power at its production site; the photographs show it in the installed state. Availability Immediately. The machine will be dismantled and relocated to Germany. Viewing by arrangement; dismantling, loading and transport can be quoted on request.

Condition: used, Year of construction: 2007, Overview This KHS Innoclean single-end bottle washer for returnable glass bottles was built in 2007. It cleans and de-labels empty bottles before filling: bottles are pushed into carrier-basket cells, run on heavy roller chains through a pre-soak, two pre-warming baths, the main caustic soak with under- and over-caustic label flushing, and three water spray zones, then handed back onto the bottle conveyor at discharge. Nineteen bottles run across the machine width in 4,275 cells; output range and design output are given below under Technical data. At design output, total dwell time is 18.7 minutes, including 10.8 minutes of caustic contact. KHS modernised the drive and operator station in 2022: Triple-i-Drive and a capacitive multi-touch panel with RFID login, detailed under Equipment. A KHS manual supplement dated November 2022 covers the upgrade. Technical data - Manufacturer: KHS - Model: Innoclean - Machine type: single-end bottle washer (soaker) - Year of manufacture: 2007 - Drive and control modernisation by KHS: 2022 - Output range: 2,800 - 14,500 bottles/h - Design output: 13,200 bottles/h, 0.75 l glass bottle, 0.68 kg - Bottles across machine width: 19 Gsdpozzz Ivjfx Acijkb - Carrier baskets: 225, of which 217 loaded - Cell pitch: 105 mm; carrier chain pitch 169 mm - Bottle diameter: 54.0 - 89.5 mm (plastic cells) - Bottle height: 180 - 340 mm - Bath volumes: main caustic soak 23.0 m³, pre-soaks 0.9 and 1.1 m³, after-caustic 0.3 m³, spray zones 0.4 m³ each - Power supply: 400 V, 50 Hz, TN-S, 113 A nominal, 125 A slow fuse; control voltage 24 V DC - Water consumption: 3.56 m³/h, 270 ml per bottle - Compressed air: 1.0 Nm³/h at 3 bar - Overall dimensions: 11,040 x 4,470 x H 3,438 mm (incl. infeed table) - Conveyor heights: infeed 720 mm, discharge 1,690 mm - Weight approx.: 33.5 t machine, 62.6 t operating - Largest transport segment: 4,410 x 4,100 x 3,370 mm, approx. 7.3 t - Enclosure type 12; CE marked Equipment - Triple-i-Drive: worm gearboxes with individual geared motors, each on its own servo inverter with synchronisation and individual overload protection - Servo-driven infeed and discharge segments with brake motors - Capacitive multi-touch operator panel, graphical interface with component views, RFID card reader - Gearbox monitoring with torque protection - Two pre-warming and main caustic immersion baths, with under- and over-caustic label flushing and bottle base spray-off - Automatic label discharge over a full-width sieve belt with brush take-off - Automatic level control and caustic dosing; sieve tub filtration and after-caustic circuit for long caustic service life - Three water spray zones, internal and external, with rotating fresh-water spray - Vapour extraction and plate heat exchanger - Siemens SIMOTION D and SINAMICS drive cabinet - Original KHS documentation: operating manual, 2022 supplement, spare parts list Condition Used, technically complete. Still installed and under power at its production site; photographs and video show it running. Availability Immediately. The machine will be dismantled and relocated to Germany. Viewing by arrangement; dismantling, loading and transport can be quoted on request.

Condition: excellent (used), Year of construction: 2017, operating hours: 400 h, functionality: fully functional, Equipment: compressor, documentation/manual, High-end (!) Austrian Brewery, newly purchased in 2017 directly from the owner. It has been used less than 100 times ever since because it is positioned at a remote location away from the main brewery. It has been maintained very well, ready for inspection. Ideally for brew-pubs. It is 5HL machine but can do 2 brews simultaneously, so effectively it can be considered a 10HL machine. It has 4 Uni-tanks of 12 HL and all the necessary equipment, such as cooling, to make it a turn-key brew installation of a premium quality. Also all necessary hoses plus a mobile pump for CIP of the Unitanks, etc. Original documentation available, in German, showing that all equipment was purchased at the Labu factory. This whole set would currently cost approx. 240.000€ (ex VAT, ex works). Delivery possible per direct after dismantling. We could provide a proper instruction / training by one of our senior brewers. Gjdpfx Acjzz Rlwsiskb Current asking price is approx. 135K€, ex VAT ex work but including instruction. The brewery is located in the Amsterdam area, the Netherlands

Condition: excellent (used), Year of construction: 2023, operating hours: 2,000 h, functionality: fully functional, Equipment: compressor, documentation/manual, Available immediately due to change in business direction. Gjdpfozp Hkxsx Aciskb A complete, fully operational beverage production system currently used for the commercial manufacture of premium kombucha. The plant is equally suitable for the production of soft drinks, functional beverages, botanical drinks, syrups, flavoured waters, iced teas and other non-carbonated beverages. Manufactured from food-grade 304 stainless steel and certified to UKCA, CE and TÜV SÜD standards. Located in Ireland. Plant Specification • 4 × 4,000L Jacketed Fermentation/Process Vessels • 2 × 2,000L Mixing/Kettle Vessels with Whirlpool Mixing • 4,000L Cold Water Tank • 4,000L Glycol Tank • Plate Heat Exchanger • Siemens PLC Control System • Complete Glycol Chilling System • Pumps and Pipework throughout • Stainless Steel Process Pipework • 2 × 200L CIP Units • Fully integrated valves and sanitary fittings • Temperature controlled throughout production. Metered Pump Capabilities Suitable for production of: • Kombucha • Functional beverages • Soft drinks • Flavoured waters • Botanical drinks • Tea beverages • Juice blends • Syrups • Beverage concentrates • RTD drinks The integrated whirlpool system allows efficient ingredient incorporation and mixing. Condition • Fully operational • Currently in production • Well maintained • Excellent condition • Available for inspection under power Certification • CE Certified • UKCA Certified • TÜV SÜD Certified • Food Grade 304 Stainless Steel Location Ireland Can assist with dismantling and loading. Price POA / Offers Invited Alternatively willing to discuss sale of complete turnkey beverage manufacturing facility. Photos and videos available upon request.

Condition: used, Year of construction: 2011, Overview Complete turnkey craft brewery built around a 4-vessel Newlands Systems (NSI) brewhouse with a 35 hl brew length, delivered from Canada and installed in 2011-2013. The plant covers the full process chain: malt intake and milling, brewhouse, fermentation and maturation, yeast handling, CIP, steam and glycol cooling. Fermentation capacity is 9 x 70 hl cylindroconical fermenters plus 2 x 70 hl pressure-rated bright beer tanks. The brewhouse runs on a Siemens Braumat control system. The brewery is still installed and under power and can be visited in operation. Technical data - Manufacturer: Newlands Systems (NSI), Canada - Year of manufacture: 2011-2016 - Machine type: complete turnkey brewery, 4-vessel brewhouse - Brew length: 35 hl - Brewhouse vessels: mash mixer 44 hl, lauter tun 69.85 hl, boil kettle 58 hl, whirlpool - Fermentation and maturation: 9 x 70 hl fermenters, 2 x 70 hl bright beer tanks - Steam: 750 kW electric steam boiler, operating pressure approx. 4 bar - Control system: Siemens Braumat - Power supply: 3 x 400 V / 50 Hz Scope of Delivery - Brewhouse | Newlands Systems | 4-vessel, 35 hl brew length | Mash mixer, lauter tun with rakes, boil kettle with internal calandria, whirlpool, wort heat exchanger, progressive cavity grain-out and spent grains pumps, post-whirlpool solids filter | 2011 - Control system | Siemens | Braumat | Brewhouse control panel and operator station | 2011 - Hot liquor tanks | Newlands Systems | 2 x 60 hl, stacked | External steam heat exchanger, pumps and valving, 316 stainless wetted surfaces, water treatment dosing bin | 2012 - Fermenters | Newlands Systems | 9 x 70 hl working volume | Cylindroconical, 60 degree cones, standpipes, cooling jackets | 2012-2013 - Bright beer tanks | Newlands Systems | 2 x 70 hl working volume | Pressure rated, carbonation stone assemblies | 2012-2013 - Yeast storage tank | Newlands Systems | 700 l | Conical, cooling jacket, mixer | 2013 - Yeast propagator | Newlands Systems | 240 l working volume | 300 l total volume, AISI 304 stainless steel | 2012 - CIP station | Newlands Systems | Steam heating and pump | 2012 - Malt silo | MAFA Sweden | UNB 70 | 30 t capacity, outdoor installation | 2012 - Auger system | MAFA Sweden | Silo and mill connections, flexible auger, specialty grains dump hopper | 2012 - Malt mill | Bühler | 4-roller | 3.0 kW drive, ATEX marked | 2012 - Grist hopper | Newlands Systems | 1,000 kg | On load cells | 2012 - Electric steam boiler | Pannpartner | 750 kW | 3 x 400 V / 50 Hz, design pressure 16 bar, empty weight 800 kg, CE marked | 2011 - Glycol chiller | Daikin | Air-cooled water chiller, refrigerant R407C, 400 V | 2011 - Sterile air unit | Donaldson | 2016 - Pumps, fittings and accessories | 2012-2013 Condition Used - still installed and under power, available for inspection in production. Availability Gsdpfx Acjzza Disiokb Immediately. Location: Norway. Dismantling, handling, packing and truck loading can be quoted on request (EXW).

Condition: used, Year of construction: 2018, Overview This Krones Linatronic M is an empty bottle inspector for glass bottles, built in 2018. It inspects every empty container before filling and rejects any container that fails one of the inspection stages. The machine combines camera-based base, sealing surface, screw thread and sidewall inspection with high-frequency and infrared residual liquid and caustic detection. Two sidewall modules with four mirror assemblies and four cameras provide a compact full-front view of the container, and the DualFlash neck finish lighting inspects the outer and inner sealing surface separately using two minimally offset lighting angles. Foreign containers are identified at the machine infeed by height, contour and colour detection. Three Ecopush rejection points separate foreign, dirty and damaged containers. The machine is operated from a Krones iPanel CD terminal. Gkjdpfx Acjzy Ud Ijisb Technical data - Manufacturer: Krones - Model: Linatronic M - Machine type: empty bottle inspector - Year of manufacture: 2018 - Application: inspection of empty bottles prior to filling; neck ring detection for returnable PET containers included - Inspection modules: base inspection, sealing surface inspection, screw thread inspection (cone optics), sidewall inspection - Sidewall inspection: 2 modules with 4 mirror assemblies and 4 cameras, two views per camera at 45° - Residual liquid and caustic detection: high frequency and infrared - Additional detection: polarising transparent films at container base and sidewall, glass fragments at the container base, scuffing via sidewall camera - Foreign bottle detection at the infeed: container height, contour and colour via camera - Rejection: 3 x Ecopush - foreign containers at the infeed, dirty containers and damaged containers at the discharge - Control: Krones iPanel CD operator terminal, prepared for data connection to a single-station PC (Datalyser) - Test bottle programme with 2D code - Conveyor height: 1,200 mm, adjustment range 1,155 - 1,315 mm - Minimum required room height: 2,810 mm - Overall dimensions: approx. 6,700 x 1,300 x H 2,800 mm - Direction of operation: right-left machine - Power supply: 400 / 230 V, 3/N/PE, 50 Hz, 6 A full load current, 20 A pre-fuse; auxiliary supply 230 V, 1/N/PE, 5 A - Standards: IEC 61439-1 / IEC 60204-1, CE marked - Machine base and housing: stainless steel (AISI 304 equivalent), clean design Equipment - DualFlash neck finish lighting, separate inspection of outer and inner sealing surface - Combined thread inspection via the sidewall mirror assembly - Fallen container detection in front of the machine (photoelectric sensors with infeed pusher) - Base blow-off unit with clocked air nozzle for foam and lubricant residues - Container blower at the infeed, conveyor dead plate (3-fold) - Servo-driven collection module for rejected containers at the discharge - Festo pneumatic system with maintenance unit, food-grade lubricants - Emergency mode: passage operation without inspection - OEM machine data sheet and dimension drawing Condition Used, technically complete. The machine is still installed and under power at its production site; the photographs show it in the installed state. Availability Immediately. The machine will be dismantled and relocated to Germany. Viewing by arrangement; dismantling, loading and transport can be quoted on request.

Condition: used, Year of construction: 1998, Overview This SIDEL SBO 10/14 Series 1 is a rotary PET stretch blow moulding machine with 10 blowing stations, producing up to 12,000 bottles per hour. It has been used for the production of 1.5 L and 2.0 L PET water bottles with PCO 1810 neck finish. The machine is still installed and in production, can be visited in operation, and is available for immediate sale. Technical data - Manufacturer: SIDEL - Model: SBO 10/14 Series 1 - Year of manufacture: 1998 - Machine type: rotary stretch blow moulding machine for PET bottles - Blowing stations: 10 - Capacity: up to 12,000 bph - Formats: 1.5 L and 2.0 L PET bottles - Neck finish: PCO 1810 - Installed power: 310 kW - Electrical supply: 400 V / 470 A Condition Used - in production, still installed and under power. The machine remains a reliable solution for water, beverage and other PET packaging applications. Availability Gkedpjzrhr Ajfx Acijb Immediately available. Location: Slovenia. Dismantling, handling, packing and truck loading can be quoted on request (EXW).

Condition: like new (used), Year of construction: 2022, Sraml 2000 litre s/s tank with mixing Gkjdpsy Am Aqsfx Aciob

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, 1 x Cimec America Rinser, 8-Head Filler and Capper. This is a compact, automatic monoblock bottling system equipped with 9 x rinsing nozzles, 8 x isobaric (counter-pressure) filling valves, and 1 x capping head. It is highly engineered for rinsing, filling, and crowning still and carbonated beverages. Manufacturer – Cimec S.r.l. Type - AM/DPS 9/8/IC/IVA. Date of manufacture - 2004. Equipment Included: • Rinser, filler and ROPP capper integrated. Crown capper is currently disabled. • All conveyors and drive motors – both ends. • Various change parts including 200ml and 330ml (currently installed). Output speed - Capable of up to 1,800 bph, depending on the bottle volume and product type. Gkjdpfey Um Anex Acieb Overall dimensions - 3.5 m long x 1.4 m wide x 2.6 m high (approx.). Last in production in August 2025.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, total height: 2,100 mm, total width: 1,100 mm, total length: 1,300 mm, overall weight: 800 kg, REF: MM5446 Borelli Group S.r.L. inline rotary filling machine suitable for filling glass bottles. This is a standard 10-head rotary filler with complete CIP kit for cleaning, including dummy bottles and washing spray system. Also supplied with filler in-feed scroll and bottle handling parts for Bordeaux glass bottles. Technical specification: ✅ Manufacturer - Borelli Group S.r.L ✅ Model - RMC10. ✅ Date of manufacture - 2018. Gkjdpex Dbkcefx Acijb ✅ Speed - up to 1500 bottles/hour (for 750ml bottles). ✅ Throughput - 1300 litres/hour. ✅ Filling system - Pure gravity. ✅ Speed variator - Inverter. ✅ Voltage - 415 V / 50 hz / 3 phase. ✅ Pneumatic supply - 3-6 bar.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: KB-20211022002, 3 x Hangzhou Kuangbo Machinery Equipment Co. Ltd 2000L beer tanks, previously used as a brite tank but can be used as an FV. Gkjdpfswl H Niox Acieb Technical Specification: Model - KBBFT1300A. Date of manufacture - 2021. Capacity - 2000 litres. Notes: All 1.5inch Tri Clamp connections other than DIN PRV port on top, manway door, and larger triclamp Features: Port on top for dry hopping etc. 2x thermowells, one for a thermometer at front and one for temp sensor in back & a CIP arm on the RHS, with sprayball.

Condition: excellent (used), functionality: fully functional, REF: MM5465 1 x Seitz-Werke GmbH filling machine for bottles. Fed by counter-pressure tank. Manufacturer - Seitz-Werke GmbH Model - SF 12. Date of manufacture - 1961 (has been refurbished since). Speed - up to 1200 bph (depending on filling volume). Capacity - variable filling range (whatever bottle size fits into holders). Gkodpfx Asx A A I Hocijb Overall dimensions - 1100mm diameter x 2350mm H. Last used in March 2023.

Condition: excellent (used), REF: MM6174 Gkjdpfx Acow E Ey Teieb 1 x Machinery Automation Ltd Capping line Technical specification: ✅ Manufacturer - Machinery Automation Ltd ✅ Model - MA-CET70 Capping Line. ✅ Cap Types - Screw Cap, Jar, Foamer, Dropper, pre-formed ROPP. ✅ Cap Diameters - 18 – 70mm (extended to 90mm). ✅ Bottle Height - 30 – 300mm Notes: This has been built for glass jars, which include a 43mm cap, a 53mm cap, 73mm cap and 70mm cap. There are 4 x change parts with the elevator to suit these and the capper gets adjusted to suit without any change parts.

Condition: used, Year of construction: 2016, Overview This GAI MLE 661 BIER is an isobarometric rinsing, filling and crown-capping monoblock for glass bottles, built in 2016 by GAI Macchine Imbottigliatrici S.p.A. (Ceresole d'Alba, Italy) and put into production in 2018. The block combines rinsing, isobaric filling over 6 filling valves and crown capping in a single frame. It is set up for craft beer in 0.33 L, 0.5 L and 0.75 L glass bottles with crown caps in 26 mm and 29 mm. Cycle times, line speed and production counters are managed from the machine's touch panel. The machine is still installed and under power. Technical data - Manufacturer: GAI Macchine Imbottigliatrici S.p.A. (Ceresole d'Alba, Italy) - Model: MLE 661 BIER (nameplate designation MLE661 BIER 003) - Year of manufacture: 2016 (in production since 2018) - Machine type: isobarometric rinser - filler - crown capper monoblock, glass bottles - Filling valves: 6 - Capacity: up to 1,300 bph - Products: Beer and other carbonated beverages (isobarometric filling) - Bottle formats: 0.33 L / 0.5 L / 0.75 L glass - Crown caps: 26 mm and 29 mm - Control: touch panel with cycle-time, speed and production counters - Power supply: 6.38 kW Gedszx Dt Njpfx Aciokb - Air supply: 6 bar - Dimensions: approx. 480 x 130 x H 230 cm Equipment - Format parts for the listed bottle formats and both crown sizes - Spare parts Condition Used - in production, still installed and under power. Approx. 6,800 operating hours; in December 2025 the machine counter showed 5,982 operating hours and approx. 6.25 million bottles filled. Last maintenance December 2025. Availability From 27 November 2026. Location: Croatia. The machine can be visited in production on request.

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, Complete craft beer bottling line: Cime Careddu GOLD DPS 6/6/1 rotary triblock (rinser – isobaric filler with double pre-evacuation – crown capper) and matching Compatta self-adhesive labeler. Both manufactured in 2018, installed in 2019 by Coenco (official Cime Careddu agent for the Benelux), professionally maintained, with low operating hours. Available immediately from a brewery in Dokkum, the Netherlands, due to production shutdown. 1. Triblock – Cime Careddu GOLD DPS 6/6/1 CROWN Type: rotary triblock (rinser – isobaric filler – crown capper) in stainless steel Gksdpfx Aezza Riocijb Year of manufacture: 2018 (serial no. 708) Rinser: 6 grippers, water rinse Filler: 6 isobaric (counter-pressure) filling valves with double pre-evacuation (DPS) and CO₂ pressurization for low dissolved oxygen Capper: 1 head for 26 mm crown caps, with crown feeder Capacity: approx. 1,000–1,200 bottles/hour (33 cl) Bottle formats included: [e.g. 33 cl longneck Ø 60 mm, 33 cl Steinie Ø 69 mm, 75 cl Ø 85 mm – fill in] CIP: cleaning-in-place connections for internal and external sterilization Electrical: 400 V / 50 Hz / 3-phase + N Operating hours: approx. [xxx] hours (approx. [xxx,xxx] bottles filled) CE certified, safety guarding fitted 2. Labeler – Cime Careddu / ENOS Compatta Type: linear self-adhesive labeling machine, one label station (front or wrap-around label) Year of manufacture: 2018 (serial no. 720) Capacity: up to approx. 1,800 bottles/hour Electrical: 400 V / 50 Hz / 3-phase + N Manual station adjustment, suitable for round bottles from 25 to 75 cl

Condition: used, Year of construction: 2017, Overview This Gruber KombiKEG is a semi-automatic combined keg cleaning and filling machine for kegs and one-way kegs, rated at approximately 30 kegs per hour. Cleaning, sterilisation and filling run as one automatic cycle: interval cleaning of keg wall and down tube with caustic and acid, steam sterilisation, and counter-pressure filling with differential pressure control. The machine was installed in 2017 by BRAUKON and is fed by stainless steel roller conveyors on the infeed and outfeed side. The machine is built entirely in stainless steel and carries one cleaning head, one sterilisation station and one filling head. Filling runs with CO2 or nitrogen. Control is a Siemens SIMATIC PLC with a colour touch panel for settings, temperature and differential pressure control, error messages and counters. It is still installed, connected and in production, and can be visited in operation on request. Technical data - Manufacturer: Gruber (Alfred Gruber GmbH, Austria) - Model: KombiKEG - Year of manufacture: 2017 - Machine type: semi-automatic combined keg washer and filler, one cleaning head / one sterilisation station / one filling head - Capacity: approx. 30 kegs/hour - Kegs: stainless steel kegs with "A" type head and one-way kegs, all common fitting systems - Functions: interval cleaning (caustic and acid), steam sterilisation, automatic filling - Filling gas: CO2 or nitrogen - Control: Siemens SIMATIC PLC, colour touch panel HMI - Detergent tank: 175 l, insulated, integrated, with steam heating coil, control valve and steam trap - Pump: 1.1 kW with electronic dry-run protection - Construction: stainless steel 1.4301, stainless steel switch cabinet, no electrical components in the wet area - Pneumatics: Festo multipole valve block, pneumatic piston valves - Dimensions: approx. 140 x 126 x H 230 cm (machine without conveyors) - Installed footprint: approx. 449 x 98 cm including the infeed and outfeed roller conveyors - Power supply: 7.5 kW max. - Air supply: 2-3 bar, approx. 0.35 m³ per keg - Steam supply: 3-4 bar Equipment - Stainless steel roller conveyors, infeed and outfeed - Steam generator - Two vent valves for fast and complete filling - Pressure switch flow line monitoring and electronic return line probe - Keg valve open control, work tables with keg stop logs - Front panel to switch between filling and CIP cleaning - Technical documentation, conformity certificate and machine layout drawing - Spare parts Condition Used, in production and still installed under power. Approximately 3,000 operating hours, around 90,000 kegs filled and 75,000 kegs cleaned. Last production April 2026, last maintenance January 2026. The machine is clean, maintained and ready to produce. It is being replaced by a higher capacity machine. Availability Gksdpfx Acezxt Ateisb Immediately available. Location: France. Dismantling, handling and truck loading are included by the seller (EXW loaded).

Condition: used, Year of construction: 2006, Overview This SIDEL SBO 2 XL Compact is a two-cavity PET stretch blow moulding machine built in 2006 for large-format containers of up to 10 litres. It pairs a Sidel preform tipper, hopper and feeder with a Sidel Compact linear oven with 5 heating modules and a blowing station for two moulds. Output depends on bottle size: approx. 2,400 bottles/hour at 500 ml, approx. 2,000 bottles/hour at 5 litres and approx. 1,000 bottles/hour at 10 litres. The machine is currently set up for preforms with a 48/41 neck finish and last produced 8-litre PET bottles. Its hour counter reads approx. 12,500 hours. It ran in a plastics converting plant until March 2026 and was then dismantled by skilled technicians and stored dry. Large-format blow moulders of this size are rarely offered on the second-hand market. Moulds are not included. Technical data - Manufacturer: SIDEL - Model: SBO 2 XL Compact - Year of manufacture: 2006 - Machine type: PET stretch blow moulding machine - Bottle size range: approx. 2.0 to 10.0 litres - Current bottle format: 8 litre PET - Current neck finish: 48/41 - Mould stations: 2, block moulds - Moulds: not included - Oven: Sidel Compact linear oven - Heating modules: 5 - Output at 500 ml: approx. 2,400 bottles/hour - Output at 5 litres: approx. 2,000 bottles/hour - Output at 10 litres: approx. 1,000 bottles/hour - Operating hours: approx. 12,500 h - Control: Siemens SIMATIC touchscreen HMI Equipment - Sidel preform tipper - Sidel preform hopper and feeder - Sidel Compact linear oven with 5 heating modules - Sidel blowing station for 2 moulds - Sidel electrical cabinet - Sidel drive panels with Siemens touchscreen control - Safety enclosure with transparent guard panels - Electrical and mechanical drawings, service and maintenance manuals, spare parts books Gksdpfx Ajzxtziecisb Condition Used - good working condition. The machine was serviced by Sidel and by in-house technicians under a regular preventive maintenance schedule, and ran in production until March 2026. It is now dismantled and stored dry and can be inspected in stored condition. Availability Immediately. Location: France. Ready for loading and shipment.

Condition: used, Year of construction: 2015, Overview This Atlanta Giotto is a single-lane wrap-around case packer for end-of-line carton packaging of PET bottles, rated at more than 20 cartons per minute. It erects the wrap-around case around the bottle group from a flat blank held in an inclined magazine, and closes it with a hot-melt glue unit. Neutral and printed carton both run on the machine. The machine was built in 2015 and ran on a mineral water bottling line until early 2025, packing 1.5 l PET bottles in 4 x 3 cartons and 1.0 l PET bottles in 5 x 3 cartons. It was operated alternately with a shrink-film bundling process, so its operating hours are low. Control is a Siemens S7 PLC with a touchscreen HMI panel. Infeed and outfeed conveyors, motorisation and the CE control panel are part of the machine. Technical data - Manufacturer: Atlanta - Model: Giotto - Year of manufacture: 2015 - Machine type: single-lane wrap-around case packer - Capacity: more than 20 cartons/minute - Infeed: single lane, inclined carton magazine - Carton formats: 80 x H262 mm for 1.5 l PET bottles, 87.5 x H322 mm for 1.0 l PET bottles - Pack patterns: 4 x 3 bottles in 1.5 l PET, 5 x 3 bottles in 1.0 l PET - Carton: neutral or printed - Case closing: hot-melt glue unit - Control: Siemens S7 PLC with touchscreen HMI panel - Length: approx. 7,175 mm machine body, plus 1,300 mm infeed conveyor - Width: approx. 2,345 mm - Height: approx. 2,336 mm - Infeed height: min. 1,050 mm - Weight: approx. 800 kg magazine section, approx. 2,250 kg packer body - Power supply: 25 kW - Compressed air: approx. 400 Nl/min at 6 bar - Infeed belt: acetal, 685 mm wide Equipment Gkedpfszxtyrjx Acisb - Infeed and outfeed conveyors - Inclined carton magazine - Hot-melt glue unit - Motorisation and CE control panel - Siemens S7 control with touchscreen panel - Electrical and mechanical drawings - Service and maintenance manuals - Spare parts books Condition Used, in very good condition with a low number of operating hours. The machine was in production until early 2025 and has since been dismantled and moved into storage. It can be inspected dismantled in the warehouse by appointment. Availability Immediately available. Location: Italy. Lifting, craning, loading and transport are available on request and are not included.

Condition: used, Year of construction: 2017, Overview Pilot-scale tunnel for the continuous thermal treatment of packaged products by water spray. The unit heats or cools filled containers – PET and glass bottles, jars, cans – as they travel through the tunnel on a modular conveyor belt. Heating and cooling run as separate cycles, one process per pass. Temperature is regulated by a PT-100 probe and a controller acting on a direct steam injection valve, which keeps operation simple and the set point stable. Frame, tanks and main components are built entirely in AISI 304 stainless steel. The machine was used exclusively in a pilot plant for R&D trials and never ran in full-scale industrial production. It is in excellent condition, well maintained, and already dismantled and stored. Technical details - Year of manufacture: 2017 - Treatment zone: 500 mm wide x 2,700 mm long - Conveyor belt: 500 mm wide perforated modular polypropylene mesh - Belt speed: adjustable via mechanical variator - Retention time: adjustable from 5 to 20 minutes - Throughput: approx. 500 units/h, adjustable Gkodpfx Acszxnu Deisb - Overall dimensions: approx. 2,870 x 1,000 x 2,250 mm (L x W x H) - Material: AISI 304 stainless steel - Electrical supply: 3 x 400 V + N + PE, 50 Hz - Total installed power: 1.7 kW (recirculation pump 1.5 kW, conveyor drive 0.18 kW) - Steam connection: DN 15 at 7.5 bar - Water connection: 1" at 3 bar - Compressed air connection: 1/4" at 6 bar - Vapour extraction: two Ø 154 mm chimney outlets Equipment - Spray tunnel with 12 stainless steel full-cone nozzles - Lower collection tray and tank with float level valve and overflow pipe - Stainless steel centrifugal recirculation pump - Automatic temperature control via PT-100 probe and direct steam injection valve - Vapour capture hoods at infeed and outfeed - Tank manhole, 185 x 235 mm - Base frame to set the machine to line working height Condition and availability - Used only for R&D trials in a pilot plant, never in industrial production - Excellent condition, well maintained - Already dismantled and stored - Can be inspected on site; loading by the seller possible - Immediately available - Location: Spain

Condition: used, Year of construction: 2020, Overview This Gronemeyer VFA is a vertical conveyor for glass bottles, built in April 2020 by Gronemeyer Maschinenfabrik GmbH & Co. (Höxter, Germany). It raises bottles between the levels of a filling line and works with two synchronously running endless chains whose carrier elements take the bottle from both sides, so the container is guided upright over the whole climb. The nominal capacity is 45,500 bottles per hour at a conveying speed of approximately 60 m/min. The conveying width is set by hand crank across a range of 20 to 150 mm, so a format change needs no tooling. The machine is enclosed in transparent guarding, has service doors with safety switches, an automatic central lubrication system and a pneumatic chain tensioning station. It is currently being dismantled and can be inspected at BEVMAQ's warehouse in Germany from early September 2026. Technical data - Manufacturer: Gronemeyer Maschinenfabrik GmbH & Co. (Höxter, Germany) - Model: VFA - Year of manufacture: Machine type: vertical bottle conveyor with two carrier chains, side grip - Product: glass bottles, Ø 68.8 mm, height 228 - 248 mm - Nominal capacity: 45,500 bottles/hour - Conveying speed: approx. 60 m/min at 50 Hz - Speed range: approx. 24 - 104 m/min at 17 - 87 Hz - Width adjustment: 20 - 150 mm, manual by hand crank - Carrier chain: type LF 114 SS - L2 NK, 114.3 mm wide, 30.48 m - Drive motor: SEW, 2.2 kW, 230/400 V, 50 Hz, IP 56, suitable for inverter operation - Gearbox: Stöber, ratio i = 9.31 - Compressed air: 6 - 10 bar, 1/8" connection - Central lubrication unit: 230 V, 50 Hz, 0.75 A - Overall height: approx. 4,185 mm - Operating environment: enclosed rooms, 5 - 40 °C Equipment - Pneumatic chain tensioning station - Automatic central lubrication system - Transparent protective guarding around the conveyor section - Service doors with RSS36 safety switches Gedpfx Acezw Em Uoiokb - Hand crank for width adjustment - Original Gronemeyer documentation: operating manual, installation drawing, gearbox, motor and lubrication system documents Condition Used - currently being dismantled; from early September 2026 it can be inspected in dismantled condition. Scope of supply and spare parts are agreed during the offer stage. Availability From early September 2026. Location: BEVMAQ warehouse, Germany. Loading by arrangement.