Beverage production machine

Labu 5/10HL Brewhouse + 4 tanks 12HL

Condition: excellent (used), Year of construction: 2008, Machining center Manufacturer: Weeke Type: BHX 500 Year of manufacture: 2008 Predpfx Ajh E Sghskisc Machining dimension X: 2,500 mm Machining dimension Y: 1,300 mm Machining dimension Z: 4 - 80 mm Number of routing heads: 2 Number of drilling heads: 2 Vertical drilling spindles: 72 Horizontal drilling spindles X: 16 Horizontal drilling spindles Y: 4 Notch saw: can be swiveled 90° Speed, X-axis: 130 m/min Speed, Y-axis: 80 m/min Speed, Z1-axis: 50 m/min Speed, Z2-axis: 27 m/min Rotational speed: 18,000 rpm Dismantled – available immediately

Condition: used, Year of construction: 1999, operating hours: 65,090 h, functionality: fully functional, ET365 GS with bar feeder and chip conveyor The machine is fully equipped Prodsycvaqopfx Akisc - Collection tray - High-pressure pump - Control cabinet air-conditioning unit - Kupa loader - The machine was purchased from a running production operation and has been technically inspected - Geometry measured and all settings adjusted - Wearing parts replaced - All functions checked and adjusted as required The machine is fully operational and ready for immediate production The machine is available immediately

Condition: used, Year of construction: 2025, functionality: fully functional, Equipment: CE marking, Holz-Her Edgebanding Machine SPRINT 1329 Multi with motorized pressure beam PUR & EVA adhesive (up to 60mm) with the NEW GLU JET GJ725 PUR PRO including vacuum pump motorized infeed guide rail guide for narrow parts edge trimming IntelliSet - tool correction fa.s.t. - setup in the gap + remaining length display of the edge band roll iTronic - pressure & adhesive quantity control automatic chain lubrication second workpiece discharge + air cushion table in the infeed area fully motorized equipment for all units multifunction milling - radius 1.3mm (2x) & 2mm (2x) + nesting package, vertical, bottom spraying devices + padding unit with texture finish for normal applications and structured surfaces and more The machine is currently being refurbished at the factory in Voitsberg / Austria. Podszx Ennepfx Akisrc Completion: approximately October / November 2026 Delivery, installation and training for the machine can be arranged directly through us for an additional fee. The machine is currently located in our delivery warehouse in Gratwein / Austria. In the event of discrepancies between the German version and a foreign language version, only the German version shall be binding. Our terms and conditions can be found on our website at holzher.de/de/agb.

Condition: good (used), Year of construction: 1997, Also available CONQUEST T51 model The used HARDINGE CONQUEST T42L 3-axis motorized CNC lathe is a robust and precise medium-sized inclined bed numerical control lathe, turning length approximately 700mm, bar passage 42m, automatic turret with 12 positions with motorized tools, FANUC 18-T CNC with color LCD and RS232 serial interface for data transfer 5″ ASA spindle maximum revolutions: 4,200 rpm continuous C-axis Psdpfsvtrc Sex Akierc 20HP spindle power X-axis travel: 172mm Z-axis travel: 575mm machine weight 4,000 Kg. Complete with 210mm AUTOBLOCK hydraulic chuck, tool presetting, programmable tailstock, 2 motorized tool holders (1 axial and 1 radial), chip evacuator, set of fixed and manual tool holders and backup disk; Year of construction 1997; machine compliant with “CE” standards, in excellent condition.

Condition: used, Year of construction: 2021, We are offering these used DME 40HL 40HL insulated fermentation tanks, manufactured in 2021. Manufacturer: DME Model: 40HL Date of manufacture: 06/23/2021 Psdpfx Asza Twnokijrc Serial number: B5715-30-03 Year of manufacture: 2021 Condition: used Type: 40HL insulated fermentation tanks If you have any questions or would like more information, please feel free to send us a message or call us. Price per unit.

Condition: ready for operation (used), functionality: limited functionality, disc diameter: 525 mm, Weight approx. 1,900 kg Dimensions (L x W x H) approx. 1,800 x 1,500 x 2,200 mm Working disc diameter 525 mm Largest disc ring width 175 mm Largest workpiece dimension 170 mm Working disc speed 45/70/90/140 rpm Predoh Invrepfx Akiec Working power, main drive 4.0 kW Connection 400V/50Hz Emergency stop switch Conventional control with operating panel Full-fledged lapping machine, conventional control

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, USED YAMAZAKI MAZAK HORIZONTAL MILLING AND TURNING CENTER INTEGREX J-200 X 500 with Smooth G CNC - 36-tool magazine package (500U) - 15 kW AC turning spindle power - B-axis with mechanical locking every 1° - 15 bar coolant through the milling spindle and onto the flange - Lateral chip conveyor with belt (500U) - High/low pressure selection (requires opening/closing of the chucks with the spindle stopped) - Radio probing system - Renishaw RMP60 (complete system including probe and Mazatrol probing cycles, excluding the Renishaw "Inspection Plus" software) - SEI FILTRATION system - Tooling and mandrel kit Complete with operating manuals, CE certification, and standard accessories. Prsdpfoz Ihmpjx Akijc

Condition: new, Year of construction: 2025, Laser power: 6000W/12000W/20000W Applicable Material: metal Condition: New Laser Type: Fiber Laser Cutting Area: 3000*1500mm Cutting Speed: 200m/min Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT Predpfx Aog Du Aqjkiec Cooling Mode: WATER COOLING Certification: CCC, CE, GS, ISO, Sgs Laser Source Brand: IPG/MAX Weight (KG): 11000KG Warranty: 3 years Power supply: 110V/220V/380V 50Hz/60Hz 1. Flagship Series Super dynamic responding, easily handle complex patterns of sheets. 2. Automatic Edge-finding With the capability of identifying irregular sheets, the edge searching time is decreased to 3 seconds. 3. Automated Nozzle Changer The machine changes its nozzle within 35 seconds at the fastest speed - this saves 50% of time costs.

Condition: used, Year of construction: 1994, functionality: fully functional, Item: AS-10177 - Alfa Laval Decanter For sale: Used, 5x Alfa Laval Decanter Centrifuges NX 418 S-31G (Year 1994) with Valve & Piping Units Manufacturer: Alfa Laval Separation A/S (Søborg, Denmark) Alfa Laval Decanter Centrifuge – Type NX 418S-31HS High-quality Alfa Laval decanter centrifuge, manufactured in Denmark. Complete unit with Flender / ATB Loher 37 kW main drive motor, electrical control cabinet, stainless steel frame, and integrated piping system. The unit is in very clean condition and was previously used in food processing. Technical details: Manufacturer: Alfa Laval Separation A/S, Denmark Type: NX 418S-31HS Material: Stainless steel Main motor: Flender / ATB Loher 37 kW, 1470 rpm, 380 V, IP55 Drive type: Belt-driven main motor Mounting: Stainless steel base frame Control system: Electrical panels and valve system included Condition: Used, in very good working condition Performance / Capacity: Dairy / whey / milk solids: 5,000 – 10,000 L/h Food / beverage (juice, yeast, starch): 6,000 – 12,000 L/h Industrial / sludge applications: 3 – 8 m³/h (depending on solids content) Prsdpfx Akexqga Aeioc Bowl diameter: 418 mm Bowl speed: up to approx. 4,000 rpm Max G-force: approx. 4,000 × g Applications: Ideal for dairy, food, beverage, starch, chemical, and industrial wastewater separation processes. Location: Denmark Price: On request Package Options: Available as a complete line (3 x decanters + 3 x valve sections) Or sold individually with matching valve section Location: Stored in Denmark, ready for loading. Export documentation and transport arrangements can be provided.

Condition: good (used), Year of construction: 2014, power: 14.8 kW (20.12 HP), volume flow: 1.63 m³/h, pressure (max.): 7.75 bar, Atlas Copco SF 15 FF Air Compressor Prsdsxk U Dcopfx Akijc Manufacturer: Atlas Copco Model: SF 15 FF Year of manufacture: 2014 Maximum pressure: 7.75 bar Free air delivery: 4.95 m³/min Air flow: 27.1 l/s, 1.63 m³/min Motor power: 14.8 kW = 20 HP Motor speed: 2,885 rpm Weight: 595 kg Power supply: 400 V, 50 Hz, 3 phase Design: Oil-free ISO class: 8573-1 Class 0 Features: Integrated Workplace Air System™, equipped with SMARTLINK Control: Elektronikon Origin: Made in Belgium No guarantee is given for the accuracy, completeness, or currency of the information provided.