Used Manufacturing Facility for sale (44,713)

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, overall weight: 16,500 kg, total width: 2,185 mm, total length: 5,563 mm, total height: 2,195 mm, Specification: Maximum sheet size: 740 x 1060 mm Minimum sheet size: 330 x 400 mm Maximum cutting force: 300 tons Mechanical speed, up to 8,000 sheets/hour Materials processed: Paper and cardboard: 0.1 - 1.5 mm Corrugated cardboard up to B-flute Equipment: - Steel feeding plate - Lifting suction cups - Transport suction cups - Adjustment of brush and roller position on the delivery table, using a single knob - Touchscreen monitor mounted on the machine - Pneumatic stops at the front guides - Laser sensors on the front guides - Modification of sensors for transparent materials - Pneumatic closing of the frame and die plate - APC System – Automatic Pressure Control System APC1 - automatic control of cutting pressure, allowing for maintaining the same pressure during the die-cutting/punching process. Possibility to set tonnage tolerance and control the sheet count after a certain number of pieces. - Programmable safety clutch for exceeding cutting force - pneumatic - Stabilizing air blast in the cutting section, increasing precision and cutting speed for thin papers - Quick-change tool system in the stripping section – Punching Metal (upper and lower stripping fingers) - Europing Centering System – die-cutting and stripping zone Dcedpfx Ajzt Nbzsb Asp - Automatic non-stop stacking system, with a curtain and programmable number of sheets per stack - Upper curtain air blast in the stacking zone - Slip sheet inserter with batch counter, located in the stacking zone - Spare gripper carriage – 1 unit - Power transformer Delivery time: immediately after acceptance of the commercial terms and payment of the financial amount. This announcement has been automatically translated. Translation errors are possible.

Condition: excellent (used), Year of construction: 2002, operating hours: 18,419 h, functionality: fully functional, travel distance X-axis: 630 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, controller manufacturer: Heidenhain, table load: 350 kg, number of axes: 5, TECHNICAL DETAILS X-axis travel: 630 mm Y-axis travel: 560 mm Z-axis travel: 560 mm Table length: 1,000 mm Table width: 600 mm Rotary table diameter: 600 mm Table weight: 800 kg Table load capacity: max. 350 kg Number of T-slots: 8 / 1 T-slot width: 14 H12 / 14 H7 mm T-slot spacing: 63 mm C-axis swivel range: 360° Tool interface: SK 40 Tool positions: 24 MACHINE DETAILS Control system manufacturer: Heidenhain Spindle operating hours: 18,419 h Total operating hours: 50,446 h EQUIPMENT 5-axis machining (3+2) NC-controlled swivel milling head (B-axis) NC rotary table (C-axis), integrated into the fixed machine table Dcsdpfxo Afw Aue Ab Aep 24-position tool changer

Year of construction: 2016, condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item within the period of November 16th to November 26th. TECHNICAL DETAILS General Information Machine number: 0307-1866 Operating hours: 9,316 h Control system: Siemens SINUMERIK 840 Dsl Working height: approx. 1,300 mm Electrical Data Operating voltage: 400 V Frequency: 50 Hz Rated current: 315 A Workpiece Area Workpiece length: min. 780 mm Workpiece length: max. 3,000 mm Workpiece diameter: min. 20 mm Workpiece diameter: max. 200 mm Workpiece weight: max. 250 kg Workpiece Drive and Clamping Workpiece drive/clamping: 2 × hydraulically actuated front chucks, manufacturer SAV Chuck bore: max. 210 mm Spindles Spindle power: 2 × 37 kW Speed: 2,200 rpm Cross slide NC1, left X1-axis: 450 mm Z1-axis: 1,980 mm Cross slide NC2, right Dcedpoz Uhydsfx Ab Asp X2-axis: 450 mm Z2-axis: 1,980 mm M-head slide Q1-axis, left: 1,980 mm Q2-axis, right: 1,980 mm Tailstock and steady rest slide W1-axis, left: 1,980 mm W2-axis, right: 1,980 mm Rapid Traverse Rapid traverse speed: max. 20 m/min EQUIPMENT Portal loading system PROMAT 2 loading units Chip conveyor Coolant system Matching VDI 50 tool holders Partially powered VDI 50 tool holders Chuck jaws Documentation

Condition: used, Sturm Coating Coating System For sale is a complete industrial Sturm robotic painting system manufactured in 2019. This automated coating system was used for series production coating of components and comes from an industrial production facility. The used painting line includes, among other things, a painting booth, drying and cooling zones, conveying technology, and several KUKA and Yaskawa industrial robots. The system is complemented by a thermal exhaust air purification system. Dsdezka Sfjpfx Ab Ascp Due to the automated system design, the robotic painting system is particularly suitable for industrial applications in the automotive industry, metal processing, and series production. Technical data & scope of supply: Manufacturer: Sturm (system) / KUKA & Yaskawa (robots) Year of manufacture (main system): 2019 Previous operation: 3-shift operation (condition appropriate for age) System components: Units, drying and cooling zone, painting booth, loading and unloading station Included robots / peripherals: Several spare KUKA robots (models KR 210L 150-2 / KR 210 2, years of manufacture 2006–2012) Associated robot control cabinets 2x Yaskawa robots EPX 2900 1x Thermal post-treatment / exhaust air purification system (VeniaKab / RNV) Condition notes: Control technology: According to the in-house maintenance department, it is at the state of the art. Electrical & mechanical: Mostly in a condition appropriate for age or good condition. Cybersecurity data deletion: For security reasons, all hard drives of the robots and PC-based stations have been removed. "Everything from one source: We will gladly offer you a suitable bank financing option for your project." More items - new and used - can be found in our shop! International shipping costs on request!

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: AA100264-11 / AA100264-12, travel distance X-axis: 2,000 mm, travel distance Y-axis: 920 mm, travel distance Z-axis: 635 mm, feed length X-axis: 2,000 mm, feed length Y-axis: 920 mm, feed length Z-axis: 635 mm, feed rate X-axis: 90 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 60 m/min, nominal power (apparent): 25 kVA, controller manufacturer: Siemens, controller model: 840 D, overall weight: 28,000 kg, spindle speed (min.): 20,000 rpm, spindle speed (max.): 20,000 rpm, spindle motor power: 25 W, number of spindles: 2, number of slots in tool magazine: 31, Equipment: chip conveyor, documentation/manual, BAZ and extrusion profile system for the production of car sill profiles consisting of: *Machining machines: - Anger machine SP2-X2000 (machine number AA100264-11) - Anger machine SP2-X2000 (machine number AA100264-12) - 2x coolant treatment units *Subassembly assembly (robot cell for sills): - Robot 1 KUKA KR120 R3200 PA - Gripper for robot 1 - Labeling station - Robot 2 KUKA KR120 R3500 - Gripper for robot 2 - Interface robot/machining center - Cleaning unit for components - Assembly machine, 2 lines - Robots 3 and 4 for handling - Drawer system with component inserts - Screwing station - Adhesive application station - Platform - Robot 5 - Gripper for robot 5 Dodpfx Ajyzh Ulsb Aocp - Pallet placement station - Safety enclosure - Electrical control and integration Further information and videos available upon request.

Year of construction: 2019, condition: like new (used), TM Norway Automatic Gas Cylinder Filling Carousel 200/300 bar Dodpfxo Ahhttj Ab Ajcp For sale: professional, fully automatic gas cylinder filling carousel manufactured by TM Norway AS, Norway. Year: 2019 Project / Serial No.: PRJ-2018-02-13-0001 CE marked This system is designed for the automated handling, preparation, filling, and control of high-pressure gas cylinders. It is suitable for industrial gas producers, cylinder filling plants, technical gas suppliers, welding gas companies, specialty gas producers, and other professional gas filling facilities. Main features: * Fully automatic 8-station carousel concept * Cylinder sizes approx. 5-50 liters according to TM Norway platform specifications * Designed for 200 and 300 bar applications * Suitable for single gases and gas mixtures * Automatic cylinder positioning and handling * Automatic valve orientation and adapter connection, depending on the configuration * Residual-pressure measurement * Automatic blow-down * Vacuum preparation * Automatic gas filling * Final pressure measurement * Automatic valve closing * Leak testing * Automatic adapter disconnection * Industrial PLC/HMI control * Rexroth control equipment * Siemens SIMATIC mobile panel * TROAX safety guarding with interlocks and emergency stops Possible gas applications, depending on the installed gas supply, adapters, software, and certification: Oxygen (O2), Nitrogen (N2), Argon (Ar), Carbon Dioxide (CO2), Helium (He), welding gases, shielding gases, industrial gases, technical gases, specialty gases, and mixed gases. The TM Norway carousel platform can support different cylinder valve connections, including DS, BS, DIN, AFNOR, CGA, and VIPR/integrated valves, depending on the installed adapters. This is not a simple manual filling manifold. It is an automated industrial cylinder filling system intended to automate several operations normally performed manually in a gas filling plant. Ideal for: Industrial gas plants, gas bottling plants, cylinder filling centers, oxygen filling plants, nitrogen filling plants, argon filling plants, CO2 filling plants, welding gas producers, mixed-gas plants, and gas plant integrators. Used industrial machine. The installation is available for inspection. The exact gas configuration, adapters, software, operating pressure, scope of supply, and recommissioning requirements must be verified for the buyer's intended application. Detailed technical PDF available upon request. Keywords: automatic gas filling carousel, gas cylinder filling machine, cylinder filling system, gas bottling plant, high-pressure gas filling, 200 bar, 300 bar, oxygen filling, nitrogen filling, argon filling, CO2 filling, helium filling, mixed gas filling, welding gas filling, industrial gas equipment, cylinder filling automation, TM Norway gas filling system. Kosan Crisplant gas filling, Kosan gas filling carousel, Siraga filling carousel, Pamasol filling machine, Pamasol gas filling, Rotarex gas filling system, Cryostar gas equipment, Linde gas filling equipment, AGA gas filling system, Messer gas filling plant, Air Liquide gas filling equipment, Air Products gas filling equipment, gas filling carousel alternative, automated cylinder filling alternative, industrial gas carousel, automatic cylinder filling carousel, high-pressure gas carousel, gas bottle filling carousel, gas bottle filling machine, compressed gas bottling machine, industrial cylinder filling equipment.

Condition: used, BOGE Screw compressor / Industrial compressor BOGE C 9 Screw compressor – 7.5 kW – 10 bar – 1,060 m³/min For sale is a used screw compressor from the manufacturer BOGE, model C 9, manufactured in 2017. The compressor is suitable for supplying compressed air to machines, workshops, production facilities, and for general industrial compressed air applications. Technical data: Manufacturer: BOGE Model: C 9 Type of equipment: Screw compressor Year of manufacture: 2017 Volume flow: 1,060 m³/min Final compression pressure: 10 bar Motor power: 7.5 kW Motor speed: 3000 min⁻¹ Control: BOGE base control Digital operating and display panel Equipment: BOGE base control Digital operating and display panel Emergency stop switch Sound-insulated housing CE marking Application areas: Industrial compressed air supply Production facilities Workshops Machine supply Manufacturing companies General compressed air applications Scope of delivery: 1 × BOGE C 9 screw compressor Condition: Used Visual condition as shown in the pictures BOGE operating display shown in the switched-on state Nameplate available Dimensions: BOGE C 9 (W × D × H): approx. 483 × 907 × 955 mm Dcjdpfx Abezxpi No Aop Transport data: Weight BOGE C 9: approx. 215 kg Other items not explicitly mentioned are not part of the sale. Shipping or freight forwarding is possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 145078, overall weight: 4,600 kg, No minimum price – guaranteed sale to the highest bidder! MACHINE DETAILS Dodpfe Agfi Dsx Ab Ascp Weight: 4,600 kg EQUIPMENT Chuck Note: The machine is sold without tooling. The following technical data are based on manufacturer specifications. The seller cannot guarantee their accuracy: TECHNICAL DETAILS Swinging diameter over bed: 525 mm Swinging diameter over cross slide: 350 mm X-axis travel: 190 mm Rapid traverse X/Z: 30 m/min Main spindle speed: 35–4,000 rpm Main spindle power: 18.5 kW Spindle bore: 76 mm Bar passage: 64 mm

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, overall weight: 6,000 kg, No minimum price – guaranteed sale to the highest bidder! Assemblies and Units Number of units: 9 1st unit – Pre-milling assembly 2nd unit – Gluing assembly Manufacturer of the gluing assembly: Nordson 3rd unit – Pressure rollers 4th unit – Cutting assembly 5th unit – Rough milling assembly 6th unit – Milling assembly 7th unit – Fine milling assembly 8th unit – Milling assembly 9th unit – Milling assembly TECHNICAL DETAILS Gluing system: Glue pot MACHINE DETAILS Voltage: 400 V Current consumption: 69 A Fuse rating: 80 A Dcedpfx Ao Af Hp Djb Aep Dimensions & Weight Dimensions (L x W x H): 9,000 x 1,050 x 2,100 mm Weight: 6,000 kg Number of transport packages: 4 EQUIPMENT Tools for pre-milling assembly Tools for pressure rollers Tools for milling assembly Includes PUR unit

Condition: used, Morgan Rushworth Section Rolls Model HSR 60/215, Year 2021, Serial No 295769, In/Out Feed Conveyors 2m x 900mm wide x 1.2m high Dcjdpfj Afbpfjx Ab Asp Morgan Rushworth HSR 60/215 hydraulic guillotine shear with 2150mm cutting length and 6mm mild steel capacity. Ideal for sheet metal fabrication and engineering applications. The Morgan Rushworth HSR 60/215 Hydraulic Guillotine Shear is a robust and reliable sheet metal cutting machine designed for precision shearing applications. With a 2150mm cutting length and 6mm mild steel cutting capacity, the machine is well suited to fabrication workshops, engineering companies and general manufacturing environments. Built by Morgan Rushworth, a well-established name in sheet metal machinery, the HSR series is recognised for its durable construction, dependable performance and accurate cutting results. Ideal for processing mild steel, stainless steel and other sheet materials, the machine provides an efficient solution for a wide range of fabrication requirements. This machine offers an excellent opportunity to acquire a proven hydraulic guillotine shear capable of delivering accurate and repeatable cutting performance while representing a significant saving compared with the cost of new equipment. Available for inspection at our Prestwick, Ayrshire facility.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 11.878, Year of construction: 2008, operating hours: 24,200 h, load capacity: 2,000 kg, lifting height: 4,720 mm, free lift: 1,590 mm, mast type: triplex, fork length: 1,090 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Dcjdj Af Hg Nopfx Ab Ajp Lifting height: 4,720 mm Free lift: 1,590 mm Load capacity: 2,000 kg Fork length: 1,090 mm Fork width: max. 970 mm Fork width: min. 250 mm MACHINE DETAILS Mast type: Triplex Fuel type: Liquefied petroleum gas (LPG) Engine manufacturer: Toyota Dimensions & Weight Dimensions (L x W x H): 3,640 x 1,150 x 2,130 mm Unladen weight: 3,864 kg Operating hours: 24,200 h EQUIPMENT Side shift Work lights CE marking Documentation

Condition: excellent (used), JD manufacturing kettle crisps batch fryer. Gas fired. 55-60kg every 8-10 mins depending on product. With pumps and Valve systems. For "hand cooked" crisps. Frying area is approx. 1.2 m wide x overall length 3 m. Dcodpez E Skgjfx Ab Asp I can supply the whole line for producing crisps 1ton a hour.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: H177B5727C, Year of construction: 2005, operating hours: 2,571 h, load capacity: 3,000 kg, lifting height: 4,770 mm, mast type: duplex, fork length: 1,600 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 3,000 kg Lifting height: 4,770 mm Fork length: 1,600 mm Fork width: max. 1,160 mm Fork width: min. 320 mm Dcjdpfx Ao Af Hfleb Asp MACHINE DETAILS Mast type: Duplex Number of wheels: 4 Fuel type: Liquefied petroleum gas (LPG) Engine manufacturer: Hyster Dimensions & Weight Dimensions (L x W x H): 2,700 x 1,300 x 2,770 mm Unladen weight: 4,910 kg Operating hours: 2,571 h EQUIPMENT Fork adjustment Documentation CE marking CE certificate

Condition: used, Bystronic XACT Smart 100, 100Ton x 3m, Year 2021.07, Weight 9000kgs. Included is the tooling shown in the photographs. Available for immediate supply. 2021 Bystronic XACT Smart 100/3100 CNC Press Brake with 100 Ton capacity and 3100mm bending length. Tooling included. Available from Prestwick, Ayrshire. Description The Bystronic XACT Smart 100/3100 is a modern CNC press brake designed for accurate and efficient sheet metal bending operations. Manufactured in 2021, this machine offers a 100-ton bending capacity and a 3100mm bending length, making it suitable for a wide range of fabrication, engineering and subcontract manufacturing applications. Offered from our Prestwick facility in Ayrshire, the machine is supplied complete with the tooling shown in the photographs and is available for immediate inspection. The XACT Smart range is renowned for its straightforward operation, high bending accuracy and reliable performance in both jobbing and production environments. Key Features: 100 Ton bending capacity Djdpj Ad U T Iefx Ab Ascp 3100mm bending length Year 2021 CNC controlled Approximate weight 9,000kg Tooling included as shown Immediate availability Inspection welcomed This machine represents an excellent opportunity to acquire a late-model European CNC press brake at a substantial saving against new replacement cost.

Condition: excellent (used), For wire diameters of 17.2 mm Djdpfx Abo Afumds Aecp Drawing die diameter (capstan): 1100 mm Drawing speed: 10 m/min Machine weight: 6000 kg For screw manufacturing/cold forming

Condition: used, This listing is for a PerkinElmer JANUS G3 Liquid Handling Workstation The unit is in full working condition and ready for immediate use This liquid handling workstation is a high-quality lab instrument manufactured by PerkinElmer (Model: JANUS G3 Workstation). This automated platform features an 8-tip Varispan arm designed for precision liquid transfer, sample preparation, and high-throughput assay automation. It has been sourced directly from a working facility, offering premium performance and dependability for standard laboratory applications while ensuring a cost-effective alternative to purchasing brand new equipment. Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. specifications_en: Voltage: 100-230 VAC, 50/60 Hz; Power: 350 VA; Configuration: 8-tip Varispan arm; RUO (Research Use Only) model. Dcsdo Agpwyepfx Ab Ajp

Condition: ready for operation (used), Year of construction: 2002, machine/vehicle number: AY11051, functionality: fully functional, cutting height (max.): 330 mm, overall weight: 1,500 kg, saw band length: 5,385 mm, saw band width: 100 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS SAWING AREA Sawing direction: Vertical. No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Sawing direction: Vertical Cut to feed roller: max. 230 mm Cut to stop: max. 260 mm Cut width to column: max. 300 mm Total opening: max. 480 mm Cutting height: max. 330 mm Saw band width: max. 100 mm Saw band length: min. 5,385 mm Saw band length: max. 5,485 mm Saw band thickness: min. 0.8 mm Saw band thickness: max. 1 mm Wheel diameter: 915 mm Dcedpfo Af Hk Uex Ab Aop Table width: 1,010 mm Table length: 740 mm Feed roller type: Manual Dust extraction port diameter: 150 mm MACHINE DETAILS Main motor power: 15 kW Connected power: 15 kW Voltage: 400 V Current consumption: 28 A Fuse rating: 32 A DIMENSIONS & WEIGHT Dimensions (L x W x H): 2,000 x 950 x 2,400 mm Weight: 1,500 kg EQUIPMENT CE marking Max. cut to feed roller: 230 mm Max. cut to stop: 260 mm Max. cut width to column: 300 mm Max. total opening: 480 mm Max. cutting height: 330 mm SAW BAND Max. saw band width: 100 mm Min. saw band length: 5,385 mm Max. saw band length: 5,485 mm Min. saw band thickness: 0.8 mm Max. saw band thickness: 1 mm TABLE AND WHEELS Wheel diameter: 915 mm Table width: 1,010 mm Table length: 740 mm FEEDING AND DUST EXTRACTION Feed roller type: Manual Dust extraction port diameter: 150 mm MACHINE DETAILS GENERAL Year of manufacture: 2002 Color: Blue Serial number: AY11051 CE marking: Yes ELECTRICS AND DRIVE Main motor power: 15 kW Connected power: 15 kW Voltage: 400 V Current consumption: 28 A Fuse rating: 32 A DIMENSIONS AND WEIGHT Overall length: 2,000 mm Overall width: 950 mm Overall height: 2,400 mm Weight: 1,500 kg

Condition: used, Year of construction: 2002, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS General Information Machine Type: CNC short-stroke turning machine Manufacturer: Traub Model: TNK 36 Year of Manufacture: 2002 Loading Magazine Manufacturer: FMB Model: TURBO 5-42XT/4200/C Year of Manufacture: 2002 EQUIPMENT Knoll chip conveyor Compact belt filter for high pressure Parts conveyor belt Dcedpfs Aay Aasx Ab Ajp Holder Driven tools Collets Various material reducers for the loading magazine Accessories required for operation

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 516347J00182, Year of construction: 2018, operating hours: 9,172 h, load capacity: 2,500 kg, lifting height: 3,270 mm, mast type: duplex, fork length: 1,000 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Lifting height: 3,270 mm Mast height: 2,325 mm Load capacity: 2,500 kg Djdpfo Af Hhaox Ab Aecp Fork length: 1,000 mm Fork width: max. 1,100 mm Fork width: min. 320 mm MACHINE DETAILS Mast type: Duplex Drive type: Electric Battery voltage: 80 V Battery capacity: 775 Ah Battery manufacturer/type: 05 EPZS 0775 SC Battery year of manufacture: 2018 Battery tray length: 1,020 mm Battery tray width: 850 mm Battery tray height: 750 mm Number of wheels: 4 Dimensions & Weight Dimensions (L x W x H): 2,490 x 1,190 x 2,320 mm Unladen weight: 4,651 kg Operating hours: 9,172 h EQUIPMENT Fork adjustment Side shift CE marking Documentation

Condition: ready for operation (used), Year of construction: 2007, operating hours: 216 h, functionality: fully functional, machine/vehicle number: 11084, power: 28 kW (38.07 HP), overall weight: 2,409 kg, working width: 1,150 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working width: 1,150 mm MACHINE DETAILS Fuel type: Diesel Engine manufacturer: Kubota Dedo Af Hfxjpfx Ab Aecp Engine displacement: 1.5 l Engine power: 28 kW Dimensions & Weight Transport dimensions (L x W x H): 2,500 x 1,650 x 1,660 mm Transport weight: 2,409 kg Number of transport packages: 1 Operating hours: 216 h EQUIPMENT CE marking Documentation

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, wire diameter (max.): 10 mm, The BLM GROUP E-FLEX is a fully automatic, all-electric, single-head CNC wire-bending machine designed to produce complex 3D wire parts directly from a coil. Key Capabilities Full Automation: It processes wire directly from a spool, seamlessly performing inline operations like straightening, cutting, chamfering, and bending.Dual-Direction Bending: The bending head features a double turret capable of rotating both clockwise and counter-clockwise. This layout allows it to use multiple bending technologies simultaneously to avoid impossible geometries. Continuous Operation: Engineered with a small physical footprint and all-electric axes, it is optimized for non-stop, 24/7 industrial manufacturing. Technical Specifications The system is built to handle heavy production environments with the following configurations: Parameter Specification Bending CapacityUp to Ø 8 mm (with Wire R=900 N/mm²) or Ø 10 mm (with Wire R=500 N/mm²)Control System5 CNC axes Bending Angle0.1° to 240°Bending Radius 0.5 mm to Infinite Coiler Capacity Up to 1,500 kg Power Consumption22 kW maximum installed power (8 kW average drawn power)Machine Dcjdpfxezu Auwj Ab Asp Weight2,400 kg (5,291 lbs)

Condition: used, This listing is for a stack of 3 x Thermo Scientifi Max Q 8000 Orbital Shaker-Incubator Dodsyv Ik Njpfx Ab Ascp The units are in full working condition and is ready for immediate use Also available as individual units The MaxQ 8000 provides high-capacity orbital shaking with integrated temperature control. This unit is direct-from-lab surplus in original condition, ideal for growing cultures and general mixing applications while saving valuable floor space. Viewing is possible in Duxford by appointment Professional Asset Overview The Thermo Scientifi Max Q 8000 Orbital Shaker-Incubator was acquired after decontamination as a surplus asset directly from a high-tier research facility. This unit is sold in its Original Lab State. We specialize in Direct Reuse, meaning we do not tamper with, refurbish, or alter the internal components of the machine. You receive the instrument exactly as it was decommissioned from the active research bench. Transparency Report and Technical Audit: • Source Pedigree: Tier-1 Biotech • Condition: Direct-from-Bench Original • Power-On Test: Verified • Integrity: 100% Original Parts (Non-Refurbished) Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. • Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is, Where-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory..

Condition: repair required (used), Year of construction: 2001, operating hours: 24,230 h, functionality: limited functionality, Hello, I am selling a Wafios machine for wire with a diameter of 3-8 mm and for tubes. The machine is damaged (memory loss in the control unit). Loading is included in the price. The machine is complete. No tooling is included. The machine comes with manuals. Djdpfj Agnu Hex Ab Ascp

Condition: excellent (used), JD Manufacturing 2 x batch fryers with distribution system. with non stick stirring to prevent clusters. all s/s. Dcsdpjymr Skofx Ab Asp

Condition: excellent (used), Year of construction: 2009, travel distance X-axis: 525 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, table width: 650 mm, For sale are 2 OPS Ingersoll EDM machines, model Gentry Eagle 500. The machines are being sold from a production facility, are in very good condition, and fully functional. Technical data: Year of manufacture: 2009 Operating hours: approx. 30,758 Available from: By arrangement Travel paths: X-axis: 525 mm Y-axis: 400 mm Z-axis: 450 mm (430 mm with Erowa) C-axis: controlled (0.001 mm resolution) Electrode holder (quill): Erowa ITS Work tank: 770 mm x 670 mm x 440 mm Table: 750 mm x 650 mm Dcjdpfxexrpm Ue Ab Aep Accuracy: 0.005 mm to 0.015 mm Max. dielectric height: 395 mm Max. pallet size: 750 x 950 x 420 mm Max. workpiece weight: 1,000 kg Max. electrode weight: 100 / 50 / 15 kg Max. throat depth: 585 mm Equipment: - Filter system with 16m² paper candle - Compressor - Recooling unit - Liftable tank with automatic tank refilling (ATA) - CO2 fire extinguishing system Machine weight: 3,640 kg (incl. generator and control panel) Operating weight: 6,450 kg (ready for operation) Footprint: 3,135 x 3,944 x 2,871 mm Options: - Pallet holder for four Power-Grip160 (not included in price) - Various 4-fold aluminum exchange pallets with chip - Various Erowa ITS electrode holders with chip Transport and loading can be organized Europe-wide at an additional cost upon request. Prices plus VAT. Inspection possible by appointment. Please contact us, our team will be happy to assist you. Trade-in or exchange possible! Machine purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Looking for a high-quality yet affordable metalworking machine for your production? Or would you like to sell yours? For further information or contact options please visit our website.