Used Used Door Line for sale (54,065)

Condition: ready for operation (used), Year of construction: 1998, This WILD door leaf press line was manufactured in 1998. It is designed for door production, handling dimensions from 1,800 to 2,300 mm in length, 500 to 1,300 mm in width, and thicknesses of 35, 40, and 44 mm. The line includes areas for gluing, pressing, and handling door panels with advanced feeding and transfer systems. If you are looking to get high-quality door production capabilities consider the WILD door leaf press line we have for sale. Contact us for more information. Machine Benefits Technical Machine Benefits • Dimensions for door production: lengths: 1800 - 2300 mm • Dimensions for door production: widths: 500 - 1300 mm • Dimensions for door production: thicknesses: 35 / 40 / 44 mm Extra Information Consisting of the following areas: Endless door panel gluing with frame laying station Press line with hard fiberboard loading station First area consists of: Portal feeding Angle transfer with rip and cross cut saw Feeding and supply of longitudinal and cross frame parts from magazines Bwjdpfsyaqmgsx Afnsh Longitudinal cross-cut station for the longitudinal frame parts Connecting station for the frame parts with the door leaf core, equipped with clamping devices Conveyor belt angle transfer with shuttle transfer of the door leaf cores to the glued hardboard panels Second area consists of: Feeding of the hardboard panels Brush cleaning machine Hardener application machine from below Glue application machine from below Disk roller conveyor Angle transfer for the lower hard fiber board Vacuum turning device for the upper hard fiberboard Automatic loading station for hardboard panels and door leaf cores Two door presses with two x four pressing stations each, set up parallel to each other Both presses are loaded at the infeed with one shuttle loading basket Both presses are unloaded at the outfeed with one shuttle unloading basket Angular transfer to the infeed into a hedgehog buffer Angular transfer at the outlet of the hedgehog buffer and feeding for stacking One-sided vacuum destacking with protective plate placement Note: The technical data and descriptions are transcribed from the original order confirmation. The information is for reference only and is not legally binding.

Condition: used, Year of construction: 2018, operating hours: 900 h, machine/vehicle number: LC524, Used Aseptic Filling Line SIPA GEA for Milk up to 48,000 bph GEA ASEPTIC BLOW FILL SYSTEM ABF 2.0 Fully aseptic blowing, filling and capping system featuring H2O2-based preforms sterilization.   Bsdpfx Afoyhcivsnswh Introduction to the Aseptic Filling Line SIPA GEA for Milk up to 48,000 bhp The used aseptic filling line SIPA GEA for milk up to 48,000 bottles per hour delivers a highly efficient and technologically advanced solution for the packaging industry. Specifically, this system ensures high-quality standards and food safety by using machines from 2018. Moreover, it processes milk in 235 ml bottles with plastic screw caps and a 38 mm neck. The line has only 900 operating hours. SIPA SFR 24 EVO Blow Molding Machine of SIPA and GEA aseptic line The SIPA SFR 24 EVO blow molding machine, manufactured by GEA in 2018, produces high-quality bottles from PET preforms. As a result, it maintains continuous and uninterrupted production, ensuring efficiency. In addition, the SFR 24 EVO model optimizes energy consumption and shapes containers with precision, making it ideal for high-performance lines like the Used Aseptic Filling Line SIPA GEA for Milk up to 48,000 bph. GEA Filling Machine The GEA filling machine, also from 2018, controls the core of the system. Since it fills milk in an aseptic environment, it preserves the organoleptic and microbiological properties of the product. Furthermore, the SIPA and GEA aseptic line doses the product with precision and operates reliably, reducing waste and improving overall efficiency. Consequently, it enhances productivity while maintaining strict hygiene standards. Arol Capping Machine for Secure Sealing The Arol capping machine, built in 2018, securely seals bottles with plastic screw caps. Likewise, it ensures a tight closure and matches the 38 mm neck perfectly. As a result, its integration into the line guarantees fast and uniform capping, preventing leaks and maintaining product integrity. Aerzen GM25S Compressor The Aerzen GM25S compressor, from 2018, powers the blow molding process. In particular, it supplies high-quality compressed air, which the machine requires for shaping PET bottles. Notably, its efficiency and reliability support seamless production. Therefore, it plays a crucial role in maintaining high-speed output. Operational Condition and Limited Use The Used Aseptic Filling Line SIPA GEA for Milk up to 48,000 bph processed only around a hundred production cycles, keeping the machines in excellent condition. Thus, the limited use ensures optimal performance and minimizes wear, making this system nearly new in operational terms. Additionally, well-maintained components extend the machine’s lifespan, reducing the need for costly replacements. Line Efficiency and Performance The Used Aseptic Filling Line SIPA GEA for Milk up to 48,000 bph combines high-performance machines designed specifically for milk processing. Consequently, it enables fast and efficient production while meeting strict aseptic standards. Moreover, the line reaches speeds of up to 48,000 bottles per hour, making it a strategic choice for producers competing in high-demand markets. Similarly, it supports companies looking to improve productivit...

Condition: used, Year of construction: 2001, operating hours: 962 h, machine/vehicle number: LC535, Technical Specifications & Performance Data This used bottling line from Toscana Enologica Mori is designed around an olive oil processing capacity of up to 350 kg/h, making it a robust, second hand solution for producers seeking reliable industrial packaging performance with premium edible oils. Upstream extraction throughput is matched with downstream packaging compatibility for small to medium bottling speeds, depending on the filler selected. Rated upstream capacity: approx. 350 kg/h (olive processing) Product handled: Olive oil and other still, non-carbonated edible oils Container materials: Glass, PET, aluminum/tinplate cans; optional bag-in-box integration Bottle/can formats: Typical range from 100 ml to 1 L bottles; cans up to 5 L (format dependent) Filling compatibility: Supports integration of gravity, vacuum, or flowmeter/mass-flow systems Fill type flexibility: Up to two fill-type configurations can be supported to suit product viscosity and format Capping options: ROPP aluminum caps, plastic screw caps, tamper-evident pourers Labeling options: Self-adhesive (PSL), hot-melt wrap-around, or neck/body label combinations Construction: Hygienic stainless-steel contact parts for food-grade operation Advanced Automation & Control Systems The line features centralized controls for consistent, repeatable packaging quality in beverage production environments handling still liquids. Automation elements are designed to minimize operator intervention while enabling fine process control. Control panel: Centralized operator interface with PLC-based logic and recipe management Automation: Variable speed drives for conveyors and pumps; level, presence, and jam detection sensors Electrical: Standard industrial 3-phase connection (e.g., 400 V, 50 Hz); installed power per module available in the manuals Safety: Fully guarded with interlocks, emergency stops, and lockable main disconnect; safety features included Documentation: Manuals available for setup, operation, and maintenance Production Line Integration Capabilities Engineered for seamless integration, the line can interface with upstream processing modules and downstream packaging components common to a modern used bottling line. Bedpfeyhch Eex Afnowh Upstream compatibility: Washers, crushers/destoners, malaxers, decanters, separators, and buffer tanks Downstream compatibility: Rinsers, fillers, cappers, labelers, inkjet/laser coders, case packers, and palletizing Format changeovers: Quick-change parts for caps and guides; recipe-driven adjustments for speeds and dwell times Conveying: Modular conveyors with accumulation options for steady flow and reduced micro-stops Machine Condition & Maintenance History Year of manufacture: 2001. Current status: READY FOR OPERATION. This second hand system presents with standard cosmetic wear consistent with age, with core functi...

Condition: used, Year of construction: 2000, machine/vehicle number: LC590, Technical Specifications & Performance Data This second hand complete oil production line is engineered for continuous olive oil extraction with industrial reliability and efficiency. Designed and manufactured by Pieralisi, the JUMBO 3 configuration delivers consistent throughput for food-grade processing and can be integrated downstream with bottling equipment for industrial packaging operations. Manufacturer: Pieralisi Model: JUMBO 3 Production capacity: 3 tons per hour Application: Edible oil extraction and clarification Line composition: Leaf remover, washer, crusher, malaxers (7 units total), decanter, separator, conveyors Year of manufacture: 2000 Configuration: Complete process line, suitable for integration with a used bottling line for final packaging Advanced Automation & Control Systems The Pieralisi JUMBO 3 platform is known for robust process control across extraction stages. The line supports synchronized operation from fruit preparation through separation, ensuring stable throughput and repeatable quality. Quick adjustments on the malaxers and decanter support optimization for different olive batches and temperatures. Process-stage synchronization for steady 3 t/h throughput Adjustable malaxing parameters for yield and quality optimization Consistent separation and clarification via decanter and final separator Operator-friendly controls supporting safe and reliable operation Production Line Integration Capabilities Engineered as a complete process solution, this second hand line interfaces easily with upstream fruit intake and downstream industrial packaging or bottling equipment. Conveyors enable smooth material handling between stages, while modular elements facilitate format and process adjustments. Inline integration with depitting, storage, and bottling/packaging lines Conveyor-based transfers between preparation, malaxing, and separation Flexible setup for edible oil production workflows Machine Condition & Maintenance History The complete line has been dismantled and stored. Components are complete as listed, ready for inspection and recommissioning at the new site. Bwjdpfx Asyhb Auefnjh Operational status: dismantled and in storage Complete core components included as listed Operational Performance & Versatility With a 3 tons per hour capacity, the line delivers stable performance across critical stages of oil extraction. The seven malaxers provide thermal and residence-time flexibility to balance yield and flavor profile. The decanter and final separator ensure efficient solids-liquid separation and product clarity suitable for edible oil standards. High-throughput crusher feeding multiple malaxers Seven malaxers: 2 double and 3 single units (7 malaxing sections total) Decanter centrifuge for primary separation Final separator for polishing and clarity Installation Requirements & Site Preparation Recommissioning requires appropriate floor space for the process modules and conveyors, utility hookups, and material flow planning from fruit reception to clarified oil storage an...

Condition: used, operating hours: 3,000 h, machine/vehicle number: LC595, Technical Specifications & Performance Data This used bottling line is configured for glass bottle handling and combines proven European packaging machinery for efficient beverage production. It integrates a filling machine, wirehooder, pasteurizer, case sealer, and auxiliary equipment to support end-to-end industrial packaging operations. Ideal for second hand acquisition, the line offers reliable performance with CE-marked components and a balanced mix of capacities for medium-scale beverage production. Containers: Designed for Glass bottle handling Key equipment and models: cobert SUPREMA filling machine; ROBINO & GALANDRINO VITTORIA 83 wirehooder; RIVI Engineering mesh pasteurizer 1P; SIAT SM11-S case sealer; OMAC lobe pump; FACCIO G. cork orienter Component years: 1986 (wirehooder), 1993 (pasteurizer), 2007 (case sealer), 2008 (cork orienter) Pasteurizer capacity indicator: Mesh area 6.5 m² Electrical data (case sealer): 380/415V, 50Hz, 3PH, 1.08A, 260W Compliance: CE markings on components Bwodpfx Afeyhb Aheneh Advanced Automation & Control Systems The line is equipped with independent control panels per machine for flexible operation and maintenance. The SIAT SM11-S case sealer features three-phase power and fixed speed controls suited for consistent end-of-line sealing. Emergency stop controls and illuminated indicators are present on operator stations, supporting safe and efficient operation. Quick adjustments on the case sealer and dedicated orienting controls on the cork orienter streamline format setup. Power architecture: Three-phase systems on end-of-line case sealer HMI/controls: Dedicated operator panels on each machine Safety: Emergency stop devices and CE-compliant guards Production Line Integration Capabilities Configured for inline operation, the equipment set provides a coherent flow from filling and closure application through thermal treatment and carton sealing. The wirehooder interfaces downstream of bottle closure for sparkling applications, while the pasteurizer integrates within the thermal treatment step. End-of-line case sealing allows seamless integration with upstream conveyors and pack handling. Inline integration between filling, closure application, pasteurization, and case handling Auxiliary lobe pump supports product transfer and utility circulation Cork orienter enhances closure logistics and line ergonomics Machine Condition & Maintenance History The line comprises robust, industry-standard machinery known for long service life and maintainability. Components display CE compliance and typical operator safety features. Offered as a second hand configuration, it is presented as ready for operation subject to standard installation, commissioning, and routine checks according to manufacturer guidelines. Operational Performance & Versatility Designed for glass bottle beverage production, the equipment supports core processes including filling, wirehood application, thermal pasteurization, and secondary packaging. The dedicated cork orienter and wirehooder streamline sparkling or specialty product closures, while the end-of-line case s...

Condition: used, Year of construction: 2000, machine/vehicle number: LC348, Used Filling Line For Edible Oil In PET 1L Bottles Capacity: 6.000 bph x 1,0 L Blow Molding Machine KOSME KSB 3000 – 2001. – 2 pcs x 3.900 bph Bjdpfx Afjyhbzdjnswh Box for preforms with transport to the blower Compressor for cooling moulds MTA S.R.L. – 2000 KOSME bottle air conveyor – 1999 AISI 304 stainless steel Electrical control cabinet with PLC Built-in air filters It transports bottles from blower to filler Filling Monoblock Filler and capper – ICS-Slovenia – 1995 – 6.000 L/h Labelling Machine Labeller ICS – 1995 – paper labels, cold glue Conveyor belts ICS – 1995 Packer in transport boxes 3×5 bottles – ICS – 1995 Shrink Wrapper Shrink wrapper SMIPACK-packer in foil 2×5 bottles – 2013 Pallet Wrapper Pallet wrapper ZLATOROG-Slovenia – 1999 Compressor KAESER low and high pressure compressors – 2000 Refrigeration dryer There are spare parts worth It has complete technical documentation Required space for equipment: 600 m2 Required installed power (equipment, compressors, refrigerators): 495 kW The Used Filling Line For Edible Oil In PET can be seen in full production function until December 15, 2022

Condition: used, Year of construction: 2011, operating hours: 35,000 h, machine/vehicle number: LC581, Used Complete CSD Can Bottling Line – 14,000 cans/hour – Overview This second hand, complete CSD can bottling line is engineered for carbonated soft drink (CSD) beverage production and industrial packaging at up to 14,000 cans per hour on 250 ml format. The core of the line is an Ortmann Herbst isobaric can filler with 45 valves, paired with a Ferrum 706 6-head can seamer (can ends size 200). The scope includes depalletizing, can washing, filling and seaming, tunnel pasteurization, in-line inspection, coding, secondary packaging, palletizing, and end-of-line handling, providing a turnkey used bottling line solution. Technical Specifications & Performance Data Core Monoblock: Can Filler–Seamer Bsdsyhbpzspfx Afnjwh Filler: Ortmann Herbst, isobaric, 45 valves (year: 1980) Seamer: Ferrum 706, 6 heads (year: 1982) Product type: Carbonated soft drinks (CSD) Nominal capacity: 14,000 cans/hour on 250 ml Can end: 200 end (industry size 200) Monoblock configuration: filler–seamer integrated block for minimized DO pickup Formats & Throughput Primary can size: 250 ml Line speed: up to 14,000 cph (format- and product-dependent) Process Equipment Included Kaeser compressor package with booster and two air receivers (p.y. 2010, start 2011) CIP station, three tanks (p.y. 2011) Syrup room with cooling system (p.y. 2011) Nagema mixer (p.y. 1992) Five ready-to-drink tanks, 100 hl each, steel with food-grade lining Beverage filter (p.y. 2011) Frezart can depalletizer (p.y. 2009, start 2011) Two can washers adapted to 250 ml (p.y. 2011) Hermis tunnel pasteurizer (p.y. 2015) Stratec can fill level inspector (p.y. 2000) Victor can printer / coder (p.y. 2020) Kisters packaging machine (p.y. 1993) Keber palletizer (p.y. 1997) Sita pallet wrapper (p.y. 2011) Complete conveyor system interconnecting all machines + two can accumulation turntables (p.y. 2011) Thermo-shrink labeling line for blank cans (p.y. 2015) Advanced Automation & Control Systems In-line quality control: Stratec can fill-level inspection for continuous monitoring and reject of out-of-spec containers Product identification: Victor industrial can printer for date/lot coding CIP capability: three-tank CIP station supports hygienic cleaning cycles for filler and product pathways Integrated conveying and accumulation: conveyors with two turntables provide smooth flow and buffer management to protect uptime Detailed electrical and controls documentation is available on request. Production Line Integration Capabilities Upstream Depalletizing of empty cans (Frezart) and transfer to washing Dual can washers adapted for 250 ml format Syrup room with cooling, beverage filtration, and mixing (Nagema) for consistent syrup preparation Compressed air supply package (Kaeser) with booster and storage Filling & Seaming Isobaric filling with 45-valve Ortmann Herbst filler ensures stable carbonation retention Ferrum 706 can seamer with 6 heads for reliable double seam integrity on 200 ends Downstream Hermis tunnel pa...

Condition: used, Year of construction: 2010, operating hours: 47,000 h, machine/vehicle number: LC582, Used Complete Krones CSD PET Bottling Line – 22,000 BPH – Overview This second hand, ultra-clean Krones CSD PET bottling line is a complete, high-efficiency solution for beverage production and industrial packaging across carbonated soft drinks, cider, sparkling water, still water and CO2-mixed juices. Built by Krones and GEA in 2010 and kept in production with OEM service, the line delivers up to 22,000 bottles per hour (0.5 L) and 18,000 bph (1.5 L), combining a Contiform S12M blow molder directly coupled to an ultra-clean isobaric filler-capper bloc. It is a market-ready used bottling line designed for reliability, hygiene, and quick format changeovers in PET. Technical Specifications & Performance Data Manufacturer: Krones and GEA Year of manufacture: 2010 Working hours: approx. 47,000 Nominal capacity: 22,000 bph (0.5 L) | 18,000 bph (1.5 L) Products handled: carbonated soft drinks, cider, sparkling water, still water, juices with CO2 Filling technology: Ultra-clean, isobaric, volumetric PET filling Current product: Apple juice with water and CO2 Neck finishes: PCO 1810, PSO 28 mm, 1810/1881 short neck Controls: Siemens Simatic S7 PLC platform Main Equipment Scope CIP: Krones VarioClean F AUT fully automatic CIP system, 4 x 5000 L, 30 m³/h Process: GEA TDS plant with flash pasteurizer, mixer, carbonator, degasser and process tanks Preforms: Preform tipper/kipper and feeding conveyors; Krones Contifeed RS preform feeding system; Prejet Linear preform cleaning unit Caps: Cassner cap feeding with cap rinsing and sterilization Blow molder: Krones Contiform S12M, directly connected to the ultra-clean bloc (no air conveyor) Filler/Capper bloc: Krones Volumetric VODM-PET 2.160-66-103 with integrated capper; Krones Vario Dos filler-bloc cleaning Coding and inspection: Domino DDC 3 laser coder; Krones Checkmat 731 FM-X+L filling level inspector; Krones Checkmat 731 EM label inspector Conveying and testing: SYNCO bottle conveyors; Krones Flowliner bottle leak tester Labeller: Krones Contiroll OPP 720-15, double roll-feed wrap-around labels with hot glue Secondary packaging: Krones VarioPro FS shrink–tray packer; Krones Multico S packet conveyors; Twin Pack handle applicator Pack coding: Leisinger Jet 3 ink coder Palletizing: Krones Robopox Modulpal (2016) Bwedpsyhbmtefx Afnjh Advanced Automation & Control Systems Line Control & PLC Siemens Simatic S7-series PLC for coordinated line control, interlocks and diagnostics Integrated filler-bloc cleaning via Krones Vario Dos for validated ultra-clean cycles Recipe and parameter management supporting fast changeovers between PET formats Quality Assurance & Traceability Laser date coding (Domino DDC 3) on primary packaging; inkjet coding (Leisinger Jet 3) on packs In-line inspection with Krones Checkmat systems for fill level and label presence/position Leak detection via Krones Flowliner for container integrity Production Line Integration Capabilities Upstream (Preforms to Bottles) Automated preform handling: tipper, conveyors and Krones Contifeed RS for steady feed Preform cleaning (Prejet Linear) to protect blowing ...

Condition: used, Year of construction: 2009, operating hours: 4,047 h, machine/vehicle number: LC589, Technical Specifications & Performance Data This used complete bottling line is configured for aseptic carton packaging in the Tetra Pak Prisma 0.33L format. Engineered around proven Tetra Pak components, it provides a compact, reliable solution for high-quality industrial packaging and beverage production. The line configuration integrates filling, capping, and packing functions with smooth container handling for stable operation and consistent output. Production speed: 7500 pieces/hour Format: 0.33L Prisma (square) Container type: Carton (Tetra Pak Prisma) Line configuration: TBA19 (Filler) + TCA45 (Capper) + TCBP70 (Packer) Filler model: TBA19 Capper model: TCA45 Bwedpfoyhbliex Afnjh Packer model: TCBP70 Operating mode: Aseptic packaging line for shelf-stable beverages Manufacturer: Tetra Pak Advanced Automation & Control Systems The line benefits from Tetra Pak engineering with integrated automation that supports stable aseptic operation. Centralized controls coordinate filler, capper, and packer modules for synchronized throughput, precise timing, and reduced downtimes. Recipe-based settings enable consistent setup for the Prisma 0.33L format, and operator-friendly HMI interfaces facilitate monitoring, diagnostics, and quick adjustments during production. Production Line Integration Capabilities Designed for seamless integration into a complete production environment, this used bottling line supports upstream and downstream connections such as infeed handling, carton supply, and end-of-line palletizing. The Prisma 0.33L format is standard in the configuration, ensuring reliable format handling and efficient changeover within the same format family. The conveyor logic and module interfaces help maintain continuous flow and balanced line performance in second hand industrial packaging applications. Machine Condition & Maintenance History This second hand line is offered in working condition and ready for operation, with original model identification on the equipment. Tetra Pak’s serviceable design supports routine maintenance, with wear components and aseptic-critical parts accessible for inspection and replacement following standard preventive maintenance practices. The line is suitable for facilities aiming to expand or standardize aseptic beverage production without significant commissioning delays. Operational Performance & Versatility Optimized for aseptic processing, the system provides controlled handling from filling to cap application and packing. The TBA19 ensures accurate fill under aseptic conditions; the TCA45 applies compatible closures for Prisma cartons; and the TCBP70 organizes secondary packaging for efficient logistics. The result is a robust solution for industrial packaging where product protection, shelf life, and consistent presentation are essential. Installation Requirements & Site Preparation The line is intended for installation in a hygienic production area with controlled environmental conditions suitable for aseptic operations. Site preparation should include adequate floor space for the filler, capper, and packer modules with service access, utilities routing, and safe o...

Condition: used, Year of construction: 2019, machine/vehicle number: LC591, Technical Specifications & Performance Data This complete used bottling line is engineered for beverage production with PET and glass bottles. Optimized for water and carbonated soft drinks, it combines reliable filling, labeling, and end-of-line packaging with robust utilities and process equipment. The line integrates components from reputable manufacturers to deliver consistent quality and uptime in industrial packaging environments. Production speed: up to 8,000 bottles per hour Compatible bottle formats: 0.33L, 0.5L, 0.75L, 1.0L, 1.5L, 2.0L Containers: PET and Glass bottles Main filler/capper/rinser: Sinkrofill 40/50/10/10, 50 filling heads, 3–5 capping heads Blow molder: Easy Blow 4L (4,200 bph nominal) Labelers: Gernep Rollfed 8-480-1RA (foil/OPP) and Gernep Soluta 10-640 3SK (paper), up to 10,000 bph Pack & handle application: SMI LSK 30 T Ergon shrink wrapper, SMI Pack HA-25 SX handle applicator Pallet logistics: Sinkrotech APM-6000-JU palletizer; Atlanta Mytho-A pallet wrapper; auxiliary manual wrapper Process & utilities: GEA pasteurization station HTF 3000PIN/19; GEA CIP station; Trane Tracer CH535 CGAX/SXAX chiller; Therminus steam boiler (456 kW); Kaeser compressors (CSDX 165 and N 502-G boosters) Inspection & coding: FT System control for volume/cap/label; Hitachi UX printer Bodpfx Ajyhbibjfnowh Advanced Automation & Control Systems The line features modern automation and quality assurance for stable operation and repeatable product quality. A PLC-controlled architecture coordinates rinsing, filling, capping, labeling, and packaging, while inline inspection and coding ensure compliance and traceability. PLC/HMI: PLC installed for centralized control and recipe management Inspection: FT System for volume, cap presence/position, and label verification Electrical: 400V, 50 Hz, 16A reference (component level) Coding: Hitachi UX inkjet printer for date/lot marking Changeovers: Designed for multiple bottle formats across PET and glass Safety: Standard guarding and emergency-stop circuits across stations Production Line Integration Capabilities Built for flexible beverage production, the line integrates upstream preform handling and blow molding with downstream conveying, labeling, and packaging. Vetromeccanica air conveyors and line conveyors provide smooth bottle transport and accumulation. Upstream: Preform conveyor and hopper, Easy Blow 4L blow molder Conveyors: Vetromeccanica Eolo air and line conveyor systems Format flexibility: 0.33L to 2.0L across PET and glass End-of-line: Shrink packaging, handle application, palletizing, and pallet wrapping Utilities integration: Chiller, steam boiler, compressors, air tanks, water treatment Machine Condition & Maintenance History The used bottling line remains in production and can be started during an on-site visit for demonstration. Manuals an...

Condition: used, machine/vehicle number: LC596, Technical Specifications & Performance Data This used bottling line is configured for glass bottle handling with a comprehensive sequence from filtration to case packing and palletizing. It is a second hand solution engineered for industrial packaging and beverage production, integrating well-known European manufacturers. The configuration covers rinsing, filling, capping (flush cork and aluminum), capsule application (heat-shrink and polylaminate), adhesive labeling, and end-of-line packaging. Container type: Glass bottles Core monoblock: MBF Syncrofill 1200.25/1200.30LV/360.4SR/240.4AV/240 (rinsing–filling–capping) Filtering: Seitz Orion plate filtration group Bottle preparation: SICK Blancamat 8 bottle washer (pre-labeling) Capsule application: Nortan Prisma 40 (heat-shrink), Robino & Galandrino Astra 6 (polylaminate) Labeling: Cavagnino & Gatti CG E8-4-2NPS (3 stations: front/back/neck), Pago PAG.876 carton labeler Conveying/accumulation: MBF accumulation table (conveyor) Case handling (option set 1): Bortolin & Kemo FOC 23 30 case erector, MA 88/1 divider inserter, IAM 2T AP case packer, MARA HM case sealer, PAC 2000 palletizer Case handling (option set 2): Mas Pack MAS 1200 case erector (400 Vac, 2 kW), Mas Pack Minipack 21/4 case packer (400 Vac, 6 kW), Mas Pack Seal 1200 case sealer, Mas Pack Exacta R Astride divider inserter Auxiliary equipment: PREO E0P051 4R2 hotmelt units, Ber PDC 30 carton scale Selected component years: 2011 (Mas Pack MAS 1200, Seal 1200), 2015 (Mas Pack Minipack 21/4, Exacta R Astride), 2001 (Ber PDC 30) Certifications: CE markings on Mas Pack modules Advanced Automation & Control Systems The line combines automated capsule application, adhesive labeling with multi-station control, and end-of-line carton forming, gluing, and packing. Modules feature integrated safety circuits and CE-compliant controls. Hotmelt application is handled by PREO melters for reliable carton sealing. Quick adjustments across labeling stations and format handling enable efficient changeovers within glass bottle families. Adhesive labeling with 3-station control for front/back/neck labels Automated heat-shrink and polylaminate capsule application Hotmelt application via PREO E0P051 4R2 units CE-compliant electrical panels on Mas Pack packaging modules Operator-friendly HMI/controls at packaging stations (per module) Production Line Integration Capabilities Bodpeyhbhqofx Afnowh Designed for inline operation, the system integrates filtration, monoblock rinsing–filling–capping, labeling, and complete end-of-line packaging. The conveyorized accumulation table assists with buffer management for steady flow between wet and dry ends. The end-of-line can be configured with either Bortolin & Kemo or Mas Pack equipment to match site preferences and spare parts policy. Inline glass bottle processing from filtration to palletizing Format changeovers supported across labeling and capsule application Compatible with divider inserters for 6-bottle patterns Carto...

Condition: new, mileage: 1,127 km, power: 235 kW (319.51 HP), first registration: 01/2026, fuel type: diesel, number of seats: 56, gearing type: automatic, emission class: euro6, color: other, brakes: retarder, total length: 12,100 mm, total height: 3,460 mm, Year of construction: 2026, Equipment: ABS, air conditioning, cruise control, = Other Options and Accessories = - Retarder - Webasto = Further Information = Damages: none = Company Information = We are an international company based in Belgium, near Brussels (+/-20 km). Belgian Bus Sales is your ideal partner for the purchase and sale of used buses, featuring a large parking area that serves as a showroom. We always have a wide selection of buses of all makes, capacities, models, and price ranges in stock. We can find the right coach, school, or city bus tailored to your needs and budget. All details are provided without guarantee. Subject to error, prior sale, and typographical mistakes. Opening hours for viewing used buses: Mon-Fri: 08:30 - 12:00, 12:30 - 17:00. Mowimy po Polsku (Agata) We speak your language: Nederlands, Français, English, Español, Português, Italiano, Русский, Polski and more. Bwjdpfx Afexwt S Sjnoh

Condition: used, Year of construction: 2000, machine/vehicle number: LC593, Technical Specifications & Performance Data This used bottling line is a complete, second hand pharmaceutical packaging solution designed for the filling and packaging of glass bottles for infusion-type applications. The line is currently in production and supports multiple dosage formats with integrated washing, filling, capping, crimping, sterilization, inspection, labeling, cartoning, and palletizing. Engineered for sterile handling, it uses purified water (PW), water for injection (WFI), and sterile compressed air in critical stages. Production speed: 3500 bottles per hour Bottle volumes supported: 0.2L, 0.25L, 0.4L, 0.5L Container type: Glass bottles (infusion/IV-style) Line configuration: Depalletizer, Bottle Washer (PW/WFI + sterile air drying), Filler, Vacuum stage, Bottle Capper, Aluminum Crimping Machine, Tray Loader, Autoclave, De-trayer, 2 x Manual Inspection Stations, Labeling Machine, Cartoning Machine, Carton Sealer, Palletizer Sterilization: Autoclave by SBM Operation status: In production Bwjdjydpa Tepfx Afneh Advanced Automation & Control Systems The line features integrated handling and synchronized conveyors to maintain steady flow through washing, filling, closing, and terminal packaging stages. Manual visual inspection stations are positioned downstream of sterilization to ensure product quality. Format changeover is designed to handle multiple bottle sizes from 0.2L to 0.5L, enabling efficient batch transitions. Standard pharmaceutical best practices such as sterile air drying and clean utility segregation support controlled operations. Electrical parameters and PLC/HMI specifications are line-dependent and can be aligned with site utilities. Production Line Integration Capabilities As a complete packaging line, this system operates in-line from depalletizing to palletizing. The upstream sections prepare and clean glass containers, the midstream modules manage accurate filling and secure closure with crimping, and the downstream area performs sterilization, inspection, labeling, case packing, sealing, and palletizing. The line offers multi-format flexibility for 0.2L, 0.25L, 0.4L, and 0.5L glass bottles and can be integrated with site-level quality systems and traceability procedures. Conveyors and accumulation zones are configured to balance cycle times across process steps. Machine Condition & Maintenance History The line is currently in production, indicating ongoing operability and maintained status. Washing with PW/WFI and sterile air drying underscores disciplined hygienic routines aligned with pharmaceutical processing. Regular operation across all stations—from depalletizer through palletizer—demonstrates a cohesive, production-ready asset suitable for immediate deployment after site adaptation. Operational Performance & Versatility Designed for glass bottles and sterile liquid products, the line combines precise filling with a dedicated vacuum stage and reliable closure via capping and aluminum crimping. The presence of an autoclave enables post-closure sterilization, while dual manual inspection stations provide visual particle control. The labeling, cartoning, and palletizing modules complete an end-of-line solution for industrial packaging, reflecting tec...

Condition: new, mileage: 1,143 km, power: 235 kW (319.51 HP), first registration: 01/2026, fuel type: diesel, number of seats: 57, gearing type: automatic, emission class: euro6, color: other, brakes: retarder, total length: 12,100 mm, total height: 3,460 mm, Year of construction: 2026, Equipment: ABS, air conditioning, cruise control, = Other Options and Accessories = - Retarder - Webasto = Further Information = Bodoxwxghjpfx Afnowh Damages: none = Company Information = We are an international company based in Belgium, near Brussels (+/-20 km). Belgian Bus Sales is your ideal partner for the purchase and sale of used buses, featuring a large parking area that serves as a showroom. We always have a wide selection of buses of all makes, capacities, models, and price ranges in stock. We can find the right coach, school, or city bus tailored to your needs and budget. All details are provided without guarantee. Subject to error, prior sale, and typographical mistakes. Opening hours for viewing used buses: Mon-Fri: 08:30 - 12:00, 12:30 - 17:00. Mowimy po Polsku (Agata) We speak your language: Nederlands, Français, English, Español, Português, Italiano, Русский, Polski and more.

Condition: used, machine/vehicle number: LC594, Technical Specifications & Performance Data This complete PET bottling line is engineered for carbonated water and soft drinks, delivering consistent output and reliable quality for beverage production. It combines high-efficiency blowing, isobaric filling, labeling, packaging, and end-of-line automation into a cohesive used bottling line suitable for second hand industrial packaging operations. Production speed: 13,000–14,000 bottles per hour Containers: PET bottles, neck finish 28 1881 Blow molder: Sidel SBO10, 10 cavities Preform handling: Sidel EBH 2050 preform hopper Air conveyor: Sidel-Alsim Rinser/Filler/Capper monoblock: Sidel-Alsim PET Trybloc Asmojet 1T RV-P 48/60/10K Rinser: 48 clamps, 1 water treatment Filler: 60 isobaric valves Capper: 10 heads Premix/Mixer: Sidel-Alsim, 30 m³/h output Bsdoydn A Hepfx Afnswh Bottle dryer: ACI Labeling machine: Krones Contiroll, rotary, 15 stations, PET wrap-around, roll-fed Shrink wrapper: Acmi Fenix, film-only configuration Handle applicator: Smipack HA 35-50-70 Palletizer: Alsim Valiant 1I 1P, fully automatic, push-type Pallet wrapper: PM Pragometal OBS Rotomatic Standard Advanced Automation & Control Systems The line integrates component HMIs and automatic control features at each station to streamline operation and changeovers. The isobaric filling block ensures precise filling for carbonated beverages, while the roll-fed rotary labeling system supports continuous, high-speed label application. Quick-change mechanical adjustments and format components help maintain uptime and reduce setup times in beverage production environments. Production Line Integration Capabilities Designed for inline operation from preform loading through palletizing, the system features smooth bottle transfer via air conveyors and synchronized starwheels in the filling monoblock. It integrates upstream blowing with downstream labeling, shrink wrapping, handle application, and palletizing, creating a complete packaging machinery solution. The line is suitable for carbonated water and soft drinks and supports multiple PET bottle formats and heights associated with the 28 1881 neck finish. Machine Condition & Maintenance History This second hand line is available for sale and is presented in ready-for-operation condition. Component years range from 1996 to 2019, reflecting a well-curated selection of bottling equipment. Buyers can arrange inspection to assess performance, equipment condition, and overall line integration prior to deployment in beverage production. Operational Performance & Versatility Optimized for carbonated products, the isobaric filler provides accurate CO₂ retention and foam control. The Sidel blow molder delivers stable bottle quality, while the Krones Contiroll rotary labeler ensures precise PET wrap-around label application at the stated throughput. Downstream packaging includes film-only shrink wrapping and automated handle application for multipacks, with automated palletizing and pallet w...

Condition: used, Year of construction: 2018, machine/vehicle number: LC592, Technical Specifications & Performance Data Bsdpfxeydc Tto Afnjwh This complete CSD canning line is a second hand, used bottling line configured for aluminum cans and engineered for reliable beverage production. Manufactured by ZhongChen, the line is designed to deliver consistent quality for carbonated soft drinks at industrial packaging scales. It features a comprehensive equipment set from mixing through downstream wrapping, enabling smooth, continuous operations. Production Speed: 18,000 bph Container Type: Aluminum cans Available Volume Range: 0.33L Product: CSD (carbonated soft drinks) Build Year: 2018 (major equipment) Main Equipment: Mixer, Filling Machine, Can Seamer, Can Rinser, Can Warmer, Shrink Wrapper, Depalletizer, Conveyor System, COP System Manufacturer: ZhongChen Advanced Automation & Control Systems The line is arranged for synchronized operation across the primary processing and packaging stages. A centralized control approach ensures coordinated start/stop, accumulation management, and fault handling, providing stable throughput at rated speed. Operator interfaces are designed for straightforward format adjustments and routine production tasks. Safety interlocks and guarding support secure operation while enabling efficient maintenance access. Production Line Integration Capabilities This production line is configured for inline operation, from primary product mixing through filling, seaming, rinsing, and secondary packaging. Conveyor systems provide smooth transfers and buffering between machines to maintain optimal flow. The 0.33L can format is supported across the entire line, with provision for standard format changeover procedures. The layout is compatible with typical upstream syrup preparation and downstream palletizing solutions to form a complete beverage production and industrial packaging system. Machine Condition & Maintenance History The line is reported as still on line, indicating it remains installed and in use at the time of documentation. The 2018 build year across key machines suggests modern engineering and contemporary safety design. Routine maintenance and serviceability are facilitated by straightforward access points and standard components common to ZhongChen packaging machinery. Operating hours are not specified. Operational Performance & Versatility Optimized for CSD processing, this used bottling line supports consistent carbonation retention and gentle product handling through filling and seaming. The can rinser and warmer modules help ensure product quality and downstream pack integrity, while the shrink wrapper forms stable packs ready for palletizing. Quality control is supported by stable handling and synchronized transfers to minimize scuffing and deformation, contributing to dependable second hand beverage production results. Installation Requirements & Site Preparation The line is arranged as a modular set of machines connected by conveyors, allowing flexible placement within a suitable production hall. Standard utilities expected for beverage lines apply, including electrical power, compressed air, process water, and drainage for cleaning solutions. Site preparation should consider straight, level f...

Condition: new, mileage: 1,179 km, power: 235 kW (319.51 HP), first registration: 01/2026, fuel type: diesel, number of seats: 62, gearing type: automatic, emission class: euro6, color: other, brakes: retarder, total length: 12,960 mm, total height: 3,460 mm, Year of construction: 2026, Equipment: ABS, air conditioning, cruise control, = Other Options and Accessories = - Retarder - Webasto = Further Information = Damages: none = Company Information = Bodpfx Afjxu Nb Renjwh We are an international company based in Belgium, near Brussels (+/-20 km). Belgian Bus Sales is your ideal partner for the purchase and sale of used buses, featuring a large parking area that serves as a showroom. We always have a wide selection of buses of all makes, capacities, models, and price ranges in stock. We can find the right coach, school, or city bus tailored to your needs and budget. All details are provided without guarantee. Subject to error, prior sale, and typographical mistakes. Opening hours for viewing used buses: Mon-Fri: 08:30 - 12:00, 12:30 - 17:00. Mowimy po Polsku (Agata) We speak your language: Nederlands, Français, English, Español, Português, Italiano, Русский, Polski and more.

Condition: used, SANDWICH PANEL LINE FOR DOORS AND WALLS : 610mm width Made by METECO This sandwich panel production line is designed to manufacture doors & walls panels up to 610mm with an annual capacity of 1.500.000 m panel/year. MAIN PRODUCTION DATA Width: 500 - 610 mm Thickness: 40 - 80 mm Capacity: 1.500.000 m panel/year TECHNICAL SPECIFICATIONS Line speed: 12 m/min Maximum weight of reels that can be used: 10 Ton Coil outer diameter: Maximum 1400 mm Coil inner diameter: 508 mm Maximum sheet width: 610 mm Maximum thickness of producible panels: 80 mm Power supply: 400 V Frequency: 50 Hz SCOPE OF SUPPLY 1. Upper sheet metal treatment section - 10 T upper unwinder with coil carriage - Pinch-Roll and roller passage - Upper reel steel frame - Polyethylene film applicator - Embossing machine for texture pattern - Press for decoration pattern - Profiling machine with upper rollers (12 stands) - Steel upper frame for profiling machine - Upper sheet guide 2. Lower sheet treatment section - Lower 10 T double unwinder with reel carriage - Polyethylene film applicator - Corona treatment machine - Embossing machine - Lower roller forming machine (12 stands) - Rollway - Operator desk for entry line 3. Panel forming section - Hot air preheating oven - Sheet guiding unit - Steel reinforcement machine - High-pressure foaming plant - Foaming portal - Foaming booth - Side sealing system and tape applicator - Double press conveyor - Double belt heating system - Double belt press - Outfeed roller conveyor - Sawing machine for cutting - Soundproof cabin - Dust extraction unit - Operator Control desk 4. Stackable section - Automatic panel tilter - Stackable conveyor - Extraction conveyor - Packaging section - Styrofoam spacer feeding system - Infeed conveyor - Packaging machine - Extraction conveyor - Wrapping machine Bwodpfxjvtpcij Afnjh 5. Panel production equipment - Top roller forming tools - Bottom roll forming tools 6. List of additional machines - Container station for polyol, isocyanate and additives - Pentane tank and accessories Width: 500 - 610 mm Thickness: 40 - 80 mm Line speed: 12 m/min Maximum weight of reels that can be used: 10 Ton Coil outer diameter: Maximum 1400 mm Coil inner diameter: 508 mm Maximum sheet width: 610 mm Maximum thickness of producible panels: 80 mm Power supply: 400 V Frequency: 50 Hz Capacity: 1.500.000 m panel/year

Condition: used, Year of construction: 2006, functionality: fully functional, NP 690 - COMPLETE GLASS BOTTLING LINE SIDEL 46,000 bph Product: Mineral Water Speed: 46,000 bph Depalletizer Simonazzi Model: SWEEP-OFF-B Year: 2005 Type: with layer separator Interlayer removal system Pallet storage Bwjdpfxoyc Rw Do Afnjh Saturator Simonazzi Model: CARBOGEA Year: 2005 Speed: 9,800 lph Filling Monoblock Simonazzi Model: EUROSTAR 2000 Year: 2005 Rinser: 84 clamps, fixed nozzle, treated product: water Filler: 84 valves, isobaric filling, mechanical valves 2 Cappers: - 24-head crown cap Ø 26 mm - 24-head aluminum screw cap Bottle Inspector Heuft Model: HBBVXTXXX Year: 2011 Level and cap integrity check Labeller Simonazzi Model: ALFA TOP BRAIN Year: 2005 32 heads, 3 cold glue stations Applicable label types: • Front • Back • Neck/collar Label Inspector ABULL Model: STRATEC - F300 Year: 2005 Shrink Wrapper SMI Model: SK800F Year: 2005 Version: film only Type: film only Double-lane for 3x2 bundles Shrink Wrapper SMI Model: SK600P Year: 2005 Version: film with tray Types: film and tray 20/24 pcs (4x6) Palletizer Simonazzi Model: KOMBI Year: 2005 Type: push-type palletizer Interlayer system Pallet storage Pallet Wrapper ROBOPAC Model: ROTARY Year: 2005 Wrapping type: rotating arm Bottle conveyor belts Bundle conveyor belts

Condition: excellent (used), Line for door jambs (frames), with END-CUTTING, ROUTERING for COUNTER-PLATE and HINGE INSERTION (Anuba). Composed of: X10030A) Loading Conveyor X10030B) Transfer Conveyor Bodjqwyclopfx Afnjwh X10030C) Double-end cutting and drilling machine "AMS" - Left-side Cutting 45° - Drilling - Cutting 90° - Right-side Cutting 45° - Drilling X10030D) Angular Conveyor (90°) X10030E) Anuba Inserting Machine "MASTERWOOD" Mod. MULTITEC X10030F) Strike Plate Routering Machine "MASTERWOOD" Mod. Teknomat 3000

Condition: excellent (used), - Dimensions: 1800x800x860 mm - For 400x600 mm trays - Serial No.: 63730 - Year: 24-04-2023 - 10 levels per door - 2 solid doors Bedpfxjwxynrs Afnewh - Temperature: -10°C - Voltage: 230V - Power: 0.6 kW - Weight: 160 kg - Model without top cover

Condition: excellent (used), - Dimensions LxHxD: 770x1150x2220 - Tray: 400x600 or 600x800 - 22 levels Bwjdewxvuzopfx Afnjh - Type: AA48V - Serial No.: 2001/1522A - Year: 2001 - Power: 1.1 kW - Voltage: 230V

Condition: excellent (used), - Negative Refrigerator (Freezer) - Dimensions (WxDxH): 750x870x2210 mm -Serial No.: 23998 -Temperature:-20 °C -2 doors -Voltage: 230V -Refrigeration unit -Refrigeration power: 0.59 kW -Refrigerant type: HFC Nsy Tdxuewxynfegsda Heating element Bwodswxynfopfx Afnjh -Heating power: 0.5 kW -Voltage: 230 V / 2.5 A -Weight: 230 kg -Year of manufacture: 1998

Condition: used, Stretch blow molding machine from Etek ISBM Line = Injection Stretch Blow Molding Stretch blow molding machine for single-use PET bottles from PET preform blanks Stretch blow molding machine for rotary index production Manufacturer: ETEK / GF-Industries Type Supra 800 sv 1 Serial number: 22000225 Year of manufacture: 2012 Power: 90 kW Bedpfx Ajkucxlofnjwh Mains connection: 400 Volt, 50 Hz Net weight approx. 6000 kg As new condition

Condition: good (used), Feed through production line for wooden doors very hight efficiency one complete door in 30 seconds (lock hole, handle hole, anuba hinges) Machine composed from two parts - so in the same time 2 doors are processed each from both sides Each part of the machine can work independent on the left side and right side Bedpfxouq Scps Afnowh Part 1 - left side milling for strike plate and milling handle hole and key hole - right side in the same time makes boring for anuba hinges Part 2 - left side milling for lock hole - right side in the same time makes inserting anuba hinges