Used Vice Uses for sale (44,062)

Condition: used, Used Molteni model MPME700SV-TDS stainless steel triple action vacuum mixer. Manufacturer: Molteni. Material: Stainless steel. Capacity: Mixing pan approximately 700 litres. Type of blades: (1) high speed disperser driven by a 48kw motor, (1) high speed disperser driven by a 36.5kw motor and (1) anchor type agitator driven by a 18.5kW Exd rated motor. Ljdpfxozvykxo Afkshk Also includes: Hydraulically operated raise and lower. For details about the refurbishment work, contact a member of our sales team.

Condition: used, Used Vale Engineering Services approximately 12,000 litre working capacity (13,110 litre total capacity) 316L stainless steel vertical reactor / hydrogenation vessel. Unit measures approximately 1,750mm diameter x 5,000mm straight side (tan to tan). Unit has welded dished top and bottom heads. Internal rated 18 bar / full vacuum design pressure at -10 to 180 deg.c. External 304L stainless steel coil jacket rated 11 bar design pressure at -10 to 180 deg.c. Unit has top entry 316L stainless steel 4-tier, 6-blade agitator driven by 15kW, 1465rpm, 50hz electric motor with mechanical seal and reduction gearbox. Unit is mounted on (4) side support lugs. Specifications: Capacity: 12,000 L Type of stainless: 316L Contact Parts Internal Pressure: 18 bar Internal Temperature: -10,180°C Jacket Pressure: 11 bar Diameter: 1,750 mm Lsdpfozun D Dex Afkjhk Straight Side: 5,000 mm Type Of Heads: Dished Legs/Lugs: 4 Lugs

Condition: used, Comprehensively tested, used Kemutec approximately 400 litre working capacity (product dependent) 316 stainless steel ribbon blender. Trough measures approximarely 1680mm Long x 580mm wide x 700mm deep. Has stainless steel single interupted ribbon driven by 5.5kw motor & gearbox. Unit includes stainless steel hinged lid with clamps. Includes bottom discharge valve. Specifications: Capacity: 14.1 ft³ Material of construction: 316 stainless steel Width: 22.83" Horsepower: 7.4 hp Ledpsyma Dbjfx Afkshk Length: 66.14" Jacket: No

Condition: used, Used Enrico Molteni model ED30 stainless steel disperser. Unit is driven by 22kw motor. Has stainless steel mixing pot with clamping section. Includes hydraulic powerpack for raise & lower. Lodeymaxfepfx Afkehk

Condition: used, Used Christy Turner hammer mill model LB7. Infeed is 252mm dia by 295mm length. Unit driven by 15kW, 1460rpm motor. Rotor housing is 205mm diameter by 400mm long. Unit has mild steel blunt swinging hammers approximately 10mm thick. Includes discharge hopper. All mounted on a mild steel stand. Weight: Estimated: Lbs250.0 Lsdpfoyz R Unjx Afkjhk Dimensions: 700mm X 1450mm

Condition: used, Used Morton-Lodige stainless steel ploughshare mixer. Unit believed to be FKM1200D, approximately 1200 litres capacity. Unit measures approximately 1750mm long x 1000mm diameter. Unit has stainless steel ploughshare blades and (2) stainless steel half ploughshare blades driven by motor/gearbox. Unit has a pneumatically operated bottom entry discharge valve. Has provision for (2) choppers but none currently fitted. Unit is mounted on a mild steel frame. Specifications: Bowl Volume: 1,200 L Material Of Construction: Stainless Steel Lsdpfey Inr Dsx Afkshk Choppers (Y/N): N Vacuum Internal (Y/N): N Jacket (Y/N): N

Condition: used, Used Hosokawa Nauta type conical mixer, approximately 750 litre working capacity. Lhsdszbuhdspfx Afkjk

Condition: refurbished (used), Year of construction: 2023, machine/vehicle number: R-00657, load capacity: 35 kg, arm reach: 1,831 mm, controller manufacturer: R-30iB Mate Plus, teach pendant manufacturer: A05B-2256-C101#EGN, Refurbished FANUC M-20iD/35 manufactured in 2023.02. The robot comes with an R-30iB Mate Plus controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard! Lhsdpjzu Tzhjfx Afkek   Brand: FANUC Model: M-20iD/35 Model Number: A05B-1228-B402 Year of Manufacture Robot: 2023.02 Warranty term (months): 12   Payload (kg): 35 Reach (mm): 1831 Repeatability (mm): ± 0.03 Controlled Axes: 6-axis Installation Type: Floor, ceiling, Angle Mount Weight (kg): 300   Controller: R-30iB Mate Plus Year of Manufacture Cabinet: 2023.02 RCC Length (m): 7   Teach Pendant: A05B-2256-C101#EGN Teach Pendant Cable Length (m): 10  

Condition: used, Used Winkworth model PV63-25 approximately 63 litre stainless steel process vessel. Unit has a flat top with half hinged lid and welded dished bottom head and includes pneumatically operated raise and lower mechanism. Unit measures approximately 600mm diameter x 450mm straight side. External stainless steel jacket rated 3.5 bar design pressure at 200 deg.c. Unit has a top entry stainless steel contra rotating gate type paddle agitator driven by 1.1kW geared-motor producing 33.6rpm and a 0.75kW geared-motor producing 76.4rpm . Unit has a bottom entry offset Silverson BE275 homogeniser with a square hole disintegrating head driven by a 0.75kW motor. Unit has a local control panel and is mounted on a stand with (4) legs. Ljdpfx Aeymayvofkehk

Condition: refurbished (used), Year of construction: 2021, machine/vehicle number: R-00644, load capacity: 165 kg, arm reach: 2,655 mm, controller manufacturer: R-30iB Plus A-size, teach pendant manufacturer: A05B-2256-C101#EGN, Refurbished FANUC R-2000iC/165F manufactured in 2021.12. The robot comes with an R-30iB Plus A-size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC  Model: R-2000iC/165F Model Number: A05B-1333-B201 Year of Manufacture Robot: 2021.12 Warranty term (months): 12   Payload (kg): 165 Lsdsztm Avepfx Afkohk Reach (mm): 2655 Repeatability (mm): ± 0.05 Controlled Axes: 6-axis Installation Type: Floor Mount Weight (kg): 1090   Controller: R-30iB Plus A-size Year of Manufacture Cabinet: 2021.12 RCC Length (m): 14   Teach Pendant: A05B-2256-C101#EGN Teach Pendant Cable Length (m): 10

Condition: refurbished (used), Year of construction: 2021, machine/vehicle number: R-00656, load capacity: 7 kg, arm reach: 717 mm, controller manufacturer: R-30iB Mate Plus, teach pendant manufacturer: A05B-2256-C101#EGN, Refurbished FANUC LR Mate 200iD manufactured in 2021.01. The robot comes with an R-30iB Mate Plus controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: LR Mate 200iD Model Number: A05B-1142-B202 Year of Manufacture Robot: 2021.01 Warranty term (months): 12 Lhodpfx Afeztm Apskjk   Payload (kg): 7 Reach (mm): 717 Repeatability (mm): ± 0.018 Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Wall, Angle Mount Weight (kg): 25   Controller: R-30iB Mate Plus Year of Manufacture Cabinet: 2021.01 RCC Length (m): 7   Teach Pendant: A05B-2256-C101#EGN Teach Pendant Cable Length (m): 10

Condition: used, Used GEA Westfalia model FSD 1-06-107 stainless steel disc bowl centrifuge. Clarifier design with total capacity 1 litre and solids holding space 0.5 litre. Heavy liquid 1.0 kg/dm3 and solids 1.4 kg/dm3 solids. Maximum speed rated 10,000rpm. Centripetal pump output up to 300 l/h depending on medium. Belt driven by 1.1 kW 220/380 volt 3/50 3,000 rpm motor. Mounted on skid with HMI control panel and stainless steel collection pot. New 2018. Lhodpfx Afozimv Ujkjk

Condition: used, Mechanical machine vice, WMW Type SX 200 Year of manufacture: 1986 Jaw width: 200 mm Jaw height: 63 mm Clamping range: 0-303 mm Ljdpfx Aszvyvzsfkohk Guide rail height: 90 mm Dimensions: 650 x 200 x 152 mm Weight: 70 kg Good condition

Year of construction: 2021, condition: used, empty load weight: 110 kg, Weight: 110 kg Year: 2021 Lhjdpfx Aozvpn Hsfkek Condition: Used, good condition Multiple units in stock. Price: € 1250,- excl. VAT

Year of construction: 2005, condition: used, - max. 28 cycles/min for single stacks Ljdpjzuz N Tjfx Afkjhk - max. 50 sheets/min when collecting sheets in the direction of travel, with several sheets arranged one behind the other - max. 50 sheets when collecting 2 sheets on top of each other (special version of the infeed belt conveyor) Used destacking unit Manufacturer: Meinert Type: AM 33 - 3000 /1300 Systems Year of manufacture: 2005 Technical data - max. 28 cycles/min for single stacks - max. 50 sheets/min when collecting sheets in the direction of travel, with several sheets arranged one behind the other - max. 50 sheets when collecting 2 sheets on top of each other (special version of the infeed belt conveyor) Design - Infeed belt conveyor in front of the system (special version: pneumatically adjustable for collecting 2 parts on top of each other) - Infeed belt conveyor in the paternoster - 2 paternoster walls – fixed side and motor-adjustable loose side - Synchronized stop adjustment – infeed and stacking positions AM 33: 2 stacking positions on one lifting device with powered roller conveyor - Personnel protection consisting of safety grilles and automatic sliding gates - Control cabinet according to VDE regulations - PC control in a separate PC cabinet Note: The technical data and descriptions are a transcript of the order confirmation at the time. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2019, - Magazine loading system - Clamping table for frame parts - 3 horizontal, longitudinal drilling units from the rear - 4 vertical drilling units from above 1 Drilling machine Manufacturer: KOCH Type: BL 2500 NC select line - used - Year of manufacture: 2019 Workpiece dimensions Workpiece length 150 - 2500 mm Workpiece width 20 - 300 mm Workpiece thickness 10 - 50 mm Material: Solid wood Magazine loading system 1 with workpiece return. Workpiece insertion via 2 Ledozuynhopfx Afkohk parallel-controlled servomotors. The number of workpieces in the magazine depends on the workpiece weight. Manual workpiece insertion Clamping table for frame parts 1 By inserting 3 support segments into the longitudinal drilling units, workpieces can be inserted manually and clamped with clamping cylinders and templates. This also allows for special workpiece dimensions. Work cycle triggering via 2 manual controls on the swappable control panel. 3 horizontal, longitudinal drilling units from the rear Construction width 160 mm Drilling motor 2 kW Longitudinal adjustment (X) with LCD display Vertical adjustment (Z) With dust extraction 4 vertical drilling units from above (supported on one side in a linear guide) Adjustable over the entire working width (X), reading LCD display. Adjustable in working depth (Y), reading LCD display One vertical clamping cylinder mounted directly on the unit Counterpieces for through-holes are available as an option. Drilling motor 1.5 kW at 50 Hz Drilling stroke 50 mm Speed 2,800 rpm Total drill length 70 mm With 4 rotary indexing heads with quick adjustment (for vertical drilling units) with fixed stops at 0 and 90 degrees Positioning control KOCH NUMERIC Basic 1 Positioning control with Beckhoff C6920 industrial PC Intel Celeron 2.2GHz CPU 2.5 320GB HDD 1x RS232, 2x USB, 1x Ethernet available 15-inch touch panel Operating system Windows 7: English User interface in English Input of all machine commands via the touch panel Software is prepared for an online connection. The configuration of the online connection (network) and commissioning are carried out by the customer or their software company. USB port on the PC 4 x Dynamic NC axis (with bearing control) for Z axes Connection data 1 Electrical connection 400 V, 50 Hz, 3 phases Voltage fluctuations max. + 6 % to - 10 % If protected by an RCD (residual current device) on the customer's side, an all-current sensitive (R CCB, Type B) RCD with a rated residual current of /= 300 mA must be used. Air connection 7 bar Dust extraction air velocity min. 30 m/s Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2011, machine/vehicle number: IntNr231315, Technical Data – used LNS FOX IFS WS 500 Feature Specification Model FOX IFS WS 500 Year of manufacture 2011 Airflow rate approx. 500 m³/h Motor power approx. 0.37 kW Voltage 400 V / 50 Hz (typical) Weight approx. 35 kg Dimensions approx. 465 × 500 × 1,145 mm (W×D×H) Filter stages 1. Pre-filter F5 2. Centrifugal separator 3. Post-filter F5 (optional HEPA H13) Filtration efficiency 99% at ≥ 1–2 µm (F9), optionally HEPA 99.95% at ≥ 0.1 µm Noise level approx. 65 dB (WS2 mod. similar) Accessories & Features • Compact design for direct installation on or beside CNC machines • Stand for extraction Lhodpjzvuzrjfx Afksk • Three-stage cleaning for effective oil and coolant mist separation • Cartridge filter can be retrofitted with HEPA kit • Easy maintenance, low noise operation, and long-life filter elements Subject to technical changes, errors and prior sale!

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, operating hours: 2,885 h, load capacity: 2,000 kg, lifting height: 3,300 mm, free lift: 1,600 mm, load center: 500 mm, fuel type: electric, mast type: duplex, construction height: 2,160 mm, battery capacity: 625 Ah, remaining battery capacity: 82 %, battery voltage: 48 V, DGUV certified until: 08/2027, fork length: 1,200 mm, tire condition: 100 %, total height: 2,180 mm, Equipment: CE marking, UVV, cabin, full service history, lighting, sideshift, Still RX 20-20 P electric forklift with the following specifications: * Lifting capacity: 2,000 kg * Lifting height: 3,300 mm * Overall height: 2,180 mm * Year of manufacture: 2017 * Operating hours: 2,885 Lhodpfx Aezivg Nsfksk STILL 2.0-ton electric forklift, very good battery, new non-marking tires (not yet mounted in the photos), duplex mast, side shifter, lighting, fork length 1,200 mm, charger. Price ex works, including 1,000 hours of service according to STILL manufacturer's specifications and a valid FEM (UVV) inspection upon sale. Inspection, demonstration, and test drive are available by prior telephone appointment. Sale is exclusively to commercial enterprises; subject to prior sale, errors and omissions excepted. We can deliver your new forklift cost-effectively using our own ramp-equipped low-loader (transport costs upon request). You can find more information and offers on our newly designed website!

Condition: ready for operation (used), 2 units available. For sale is a high-quality GARANT LCV 125 G chuck for professional use on CNC machining centers. This chuck impresses with its high clamping force, precision, and optimal accessibility, making it ideal for 5-axis machining as well as complex milling operations. Technical features: Manufacturer: GARANT Type: LCV 125 G Jaw width: 125 mm Lodpozuz R Refx Afkehk High clamping force with a compact design Precise workpiece positioning Ideal for 5-sided and 5-axis machining Robust industrial design Advantages: High repeatability Optimal accessibility for milling tools Reduced setup times Safe and vibration-dampened workpiece clamping Suitable for single-part and series production Condition: Used, fully functional. Normal signs of wear from industrial use.

Condition: used, Used PSV approximately 4,000 litre working capacity and approximately 6,300 litre total capacity (product dependent) vertical stainless steel reactor. Unit has welded dished top and bottom heads. Unit measures approximately 1,800mm diameter x 2,450mm straight side. Internal rated 6 bar/full vacuum design pressure at 130 deg.c. External stainless steel coil jacket rated 9 bar/full vacuum design pressure at 185 deg.c. Unit has external stainless steel cladding. Has top entry stainless steel 2-tier, 4-blade pitched blade agitator driven by motor/gearbox. Unit has (4) stainless steel internal wall mounted baffles. Specifications: Capacity: 4,000 L Type of stainless: Stainless Steel Internal Pressure: 6 bar Internal Temperature: 130°C Jacket Pressure: 9 bar Lodpfxszdfb He Afkshk Diameter: 1,800 mm Straight Side: 2,450 mm Type Of Heads: Welded Dished Top and Bottom Legs/Lugs: 4 Lugs

Condition: used, Year of construction: 2000, No. of axis 10 No. of spindles 2 Max. spindle bore 10 mm Spindle speeds 100-16000 rpm Control: Ledpfx Ajzvcduofkjhk Fanuc Equipped with: Magazine barfeeder FMB Minimag Chip conveyor

Condition: used, Year of construction: 2003, No. of axis 10 No. of spindles 2 Max. spindle bore 16 mm Spindle speeds 100-10000 rpm Lsdpfxozvb Rys Afkohk Live toolings on S2, S3, S5 & S6 Control: Fanuc PNC 16i Equipped with: Magazine barfeeder FMB Turbo 2-16

Condition: used, The Sicko ASF universal destacking system with high-lift trolley is designed for use as an automated system behind planing machines or similar machining equipment. The stacking system can operate either with or without spacer blocks. Workpiece length: approx. 90–200 cm Lhjdpfx Afoztvuhjkok Technical data: - Workpiece height: max. approx. 10 cm - Stack height: ~ 1,000 mm - Stack width: ~ 1,000 mm

Year of construction: 2014, operating hours: 3,100 h, condition: excellent (used), functionality: limited functionality, MYDATA MY500JP Jet Printer 2014 in excellent condition with exceptionally low operating hours (approximately 3,100). Kept and used in a clean environment. Complete system supplied with offline programming PC, MYCAM JP software, 2D Inspection & Repair option, SMT Adhesive option, manual load tables and associated documentation. There are also some spares included which we can bundle into a sale deal for an appropriate price. Visits/Inspection are welcome by appointment. An excellent opportunity to acquire a MY500JP suitable for high-mix, low-to-medium volume SMT production. The machine exhibits an intermittent issue affecting movement on the X-axis during camera positioning. On occasion, a slight jitter or vibration is observed, which can prevent the vision system from reliably locating the PCB fiducial during initial board loading or machine initialisation. The fault is intermittent and does not occur consistently. Most of the time, reloading the PCB allows operation to continue normally. Occasionally, a machine restart is required. The root cause has not been determined, but the issue appears to be associated with the X-axis motion control system. Potential areas for investigation include the servo amplifier (drive), encoder, encoder cable or other associated motion control components. Despite this intermittent behaviour, the machine was used in active production of complex PCB assemblies, including fine-pitch BGA boards, for approximately 12 months prior to being replaced as part of an equipment upgrade. The machine is therefore offered for sale on the understanding that diagnosis and repair of this intermittent fault is outstanding. Included: MYDATA MY500JP (2014) Approx. 3,100 operating hours MYCAM JP offline programming PC and software 2D Inspection and Repair option SMT Adhesive option Manual loading Technical documentation 4pcs AE04 ejectors Bundle of spare parts Not included: Solder paste Cassette (Holding Assembly), Solder paste, Purge Gel, Filter boxes Lhsdpfxezlx E Te Afkok Conveyors

Condition: used, Year of construction: 2015, operating hours: 1,000 h, machine/vehicle number: LC396, Used Doypack Filling Line kg/h Filling Line Technical Configuration The used Doypack filling line, rated at 600 kg/h, comprises a series of 2015 machines that offer precision, hygiene, and reliability in filling flexible pouches. The process begins with product preparation and feeding, ensuring uniform consistency and stability before filling. Next, a FL Tecnics machine, model FL 2.2, handles pouch feeding, weight filling, sealing, and packaging. Specifically, a VARPE control system measures the weight of the product in each pouch with high precision, minimizing variations and waste. Simultaneously, another VARPE unit performs an X-ray inspection, which detects any contaminants or structural issues. Consequently, this adds a crucial level of safety and quality control. Meanwhile, a spiral airflow pasteurizer manufactured by SARP performs the pasteurization phase. Unlike other systems, this design treats the product uniformly, preserving its organoleptic characteristics. Finally, a cartoner completes the packaging process, efficiently organizing and preparing the filled pouches for shipping. Taken together, these components comprise the 600 kg/h Doypack/Tetra Pak filling line used to ensure a safe, uniform, and high-performance packaging process. Production Performance and Operating Conditions The 600 kg/h Doypack/Tetra Pak filling line used processes up to 600 kilograms of product per hour. Thanks to its design, it maintains consistent dosing and minimizes downtime. Its weight-based filling system ensures precise volumes in each pouch, thus reducing overfilling and meeting production specifications. Notably, the line has only been in operation for approximately 1,000 hours, during which it has produced approximately 5 million pouches. Therefore, the system remains in near-new condition. Therefore, plants can count on long-term reliability with minimal wear. In terms of maintenance, this translates into reduced operating costs and longer uptime. Versatility in Product Types and Formats The Doypack/Tetra Pak filling line used operates with pouch sizes from 90 grams to 150 grams, using weight-based precision filling. Thanks to this, operators can process a wide range of products, including infant formula, ready-to-drink beverages, dairy products, sauces, and creams. More importantly, technicians can easily adjust dosing parameters to accommodate varying product viscosities or packaging standards. As a result, this system offers high flexibility to companies operating multiple product lines. Furthermore, weight-based filling improves yield accuracy, helping manufacturers meet labeling and legal compliance requirements. Operational Safety and Technical Documentation Each machine on the Doypack/Tetra Pak filling line includes integrated safety devices compliant with European standards. Lhedsvguc Uopfx Afksk These include mechanical guards, interlocks, and alarms that proactively protect personnel. Furthermore, intuitive safety interfaces reduce training time and improve operational safety. The line includes technical manuals and comprehensive documentation. This allows technicians to manage installation, configuration, and routine maintenance without the need for external support. This autonomy ultimately translates into faster startup and improve...