Used Production Space for sale (24,583)

Condition: used, 70 linear meter painting chain, with clutch system for a load of many products in confined space (see video) Nlodpfoivur Ajx Akieh 70-meter painting line with friction system for loading multiple products in a small space (see video)

Condition: used, Year of construction: 2023, operating hours: 2,600 h, functionality: fully functional, total width: 18,500 mm, total length: 23,000 mm, compressed air connection: 6 bar, type of input current: three-phase, input current: 500 A, power: 275.5 kW (374.58 HP), space requirement length: 23,000 mm, space requirement width: 18,500 mm, For sale is a state-of-the-art, fully integrated wood pelletizing and shredding line (built in 2023) for processing A1-grade waste wood and disposable pallets into high-quality heating pellets. This turnkey complete system covers the entire process, from material feed to two-stage shredding, metal separation, suction and filtration technology, pelletizing, cooling, and bagging into big bags or smaller containers. Equipment: * Automatic scraper floor hopper with feeding system * AMIS shredder ZWS 1700 * High-performance cutting mill * Belt conveyor magnet and metal separator * SPÄNEX suction and filtration system with fire protection * GreCon spark detection system * 10 m³ material hopper with dosing system * 2 × ECOKRAFT pellet presses LP22 * Rotary screen systems with conveyor belts * Big bag system and semi-automatic bagging system Njdjzhbf Ijpfx Akislh Technical data: * Year of manufacture: 2023 * Total connected load: 275.5 kW * Required fuse rating: 500 A / 400 V * Production capacity during test run: approx. 460 kg/h * Space requirement: approx. 23 × 18.5 m The system is in near-new condition and is available immediately. Detailed technical documentation with all components and specifications is available and will be provided upon request.

Condition: excellent (used), Complete Pallet Manufacturing Line P+K & Vanderloo For sale is a highly productive pallet manufacturing system for four-way pallets. The main line from P+K GmbH was completely overhauled in 2019 and has seen very little use since then. The system efficiently covers the entire process from stringer pre-fabrication, main nailing, IPPC branding to nesting/stacking. Technical Data & Highlights: • Changeover Times: Fully automatic adjustment of almost all components at the push of a button! Nedj Afyn Hepfx Akiolh • Main Line Performance: 400–600 four-way pallets / 8 hours with only 2 operators • Stringer Line Performance: High-performance cycle time of approx. 4 seconds per stringer • Control System: Siemens S7 PLC (Main Line) System Components: Pos. 1a: Template Nailing Machine P+K Type M/III/27/1500 (Year 2012 / Overhauled 2019) • Robust open frame, 1,700 mm passage width, max. nail spacing 1,500 mm. • 27 nail feeders in 3 nail hoppers (gearbox brake motor), stepper motor nail ejector. • 1 set (20 pcs) of hammer boxes on a movable frame. For nail lengths 25–90 mm. • 11.5 kW eccentric main drive, frequency-controlled template transport (without templates). • Siemens S7 control system, touch panel, memory for 99 layouts. • Pneumatic upper pallet guide (up to 9 deck boards), nail loading platform, central lubrication. Pos. 1b: Fully Automatic Stringer Nailing Machine VANDERLOO (Year 2001) • Mechanical eccentric nailing, automatic format adjustment at the push of a button. • Stringer dimensions: Length 600–1,400 mm | Width 80–150 mm (Euro & special sizes). • Autonomous operation: 3 block feeders with NEW buffer belts & block control. • 1 automatic board magazine, 9 nail feeders with eject control, run-out buffer. • Support/spare parts guaranteed in the long term by successor AVM Metaalbewerking. Pos. 2: Intermediate transfer unit with integrated IPPC branding station (approx. 2,500 mm) • Pallet transport for intermediate processes, release manually or via automation. • Auto-adjustment at the push of a button: Width (700-1500 mm) & height motorized via spindle. • 2 longitudinally adjustable branding units (heating elements 2x 1,100 W), pneumatic pressing. • Temperature control unit with preheating circuit. Pos. 3: Positioning table • Further transport to the stacking position, adjustable stop system, driven chain conveyors. • Synchronized auto-parallel adjustment via spindles (width 700-1500 mm). Pos. 4: Portal Stacker (Fully Automatic with Nesting) • Stable double-column portal with lifting crossbeam (chain) & swivel arm. Siemens S7 PLC. • Auto-gripper arm adjustment at the push of a button to pallet length. • Capacity: Sizes 600x600 to 1600x1600 mm, stacking height up to max. 3.0 m. Pos. 5 & 6: Conveyor & Safety Devices • Heavy-duty removal conveyor (approx. 5,900 mm), driven at 8 m/min. • Including all protective devices according to the layout plan. Terms of Sale: Sale ex works without warranty. Disassembly, loading and collection are the responsibility of the buyer at their own cost and risk. Price: On request (plus VAT).

Condition: used, Production line for radiators You can find further information in the attached PDF document. Accessories, tools shown, and clamping devices are included in the scope of delivery only if this is noted in the additional information. Nsdezpbl Dspfx Akijlh We reserve the right to make changes and correct errors in the technical data and specifications, as well as to sell items before they are shipped!

Condition: used, Year of construction: 2009, AI Overview A 13-meter tube-in-tube heat exchanger paired with a mono (progressive cavity) pump is a heavy-duty industrial setup designed for continuous heating or cooling of high-viscosity, abrasive, or fiber- and particulate-laden fluids (such as wastewater sludge, digestate, food purees, pulps, or industrial effluents). [1, 2, 3] Core System Components & Description Tube-in-Tube (Double-Pipe) Heat Exchanger (13 Meters): Design: Consists of a concentric layout where a smaller inner tube (often corrugated to boost turbulence and heat transfer) is nested inside a larger outer shell tube. Flow Configuration: The process fluid flows counter-currently through the inner tube, while the service/heating/cooling medium flows through the annular space between the inner and outer tubes. Length & Scale: A 13-meter run (frequently modular or multi-pass/series-connected units mounted on a skid frame) provides an extended thermal exchange surface area suited for duty points requiring significant temperature delta (Δ T) without clogging. Handling Solids: Ideal for fluids containing suspended solids, large particles, or fibers up to tens of millimeters that would choke standard plate heat exchangers. [1, 2, 3, 4, 5, 6] Mono Pump (Progressive Cavity Pump): Function: Acts as a positive-displacement feed pump that delivers a steady, controlled, low-shear flow rate of the product medium into the heat exchanger. Why it fits: Progressive cavity ("mono") technology prevents pulsation and handles abrasive, thick, or high-viscosity slurries smoothly without damaging sensitive cell structures or choking under backpressure. [1] Key Applications Wastewater and sewage sludge heating or cooling. Viscous food-industry processing (sauces, pulps, creams, purees). Industrial effluent and dye-house waste heat recovery. Njdpsz Ru Ersfx Akijlh Continuous thermal treatment requiring plug-flow characteristics and easy Clean-in-Place (CIP) maintenance Usage: Cooling or Heating of Viscous Products Previously Used on: Yoghurt and Juice Pastes Pump: Mono Pump Meters of Tube in Tube: 13 Condition: Very Good Available: Immediately

Condition: used, Year of construction: 2009, AI Overview A 13-meter tube-in-tube heat exchanger paired with a mono (progressive cavity) pump is a heavy-duty industrial setup designed for continuous heating or cooling of high-viscosity, abrasive, or fiber- and particulate-laden fluids (such as wastewater sludge, digestate, food purees, pulps, or industrial effluents). [1, 2, 3] Core System Components & Description Nljdoz Ruxlopfx Akioh Tube-in-Tube (Double-Pipe) Heat Exchanger (13 Meters): Design: Consists of a concentric layout where a smaller inner tube (often corrugated to boost turbulence and heat transfer) is nested inside a larger outer shell tube. Flow Configuration: The process fluid flows counter-currently through the inner tube, while the service/heating/cooling medium flows through the annular space between the inner and outer tubes. Length & Scale: A 13-meter run (frequently modular or multi-pass/series-connected units mounted on a skid frame) provides an extended thermal exchange surface area suited for duty points requiring significant temperature delta (Δ T) without clogging. Handling Solids: Ideal for fluids containing suspended solids, large particles, or fibers up to tens of millimeters that would choke standard plate heat exchangers. [1, 2, 3, 4, 5, 6] Mono Pump (Progressive Cavity Pump): Function: Acts as a positive-displacement feed pump that delivers a steady, controlled, low-shear flow rate of the product medium into the heat exchanger. Why it fits: Progressive cavity ("mono") technology prevents pulsation and handles abrasive, thick, or high-viscosity slurries smoothly without damaging sensitive cell structures or choking under backpressure. [1] Key Applications Wastewater and sewage sludge heating or cooling. Viscous food-industry processing (sauces, pulps, creams, purees). Industrial effluent and dye-house waste heat recovery. Continuous thermal treatment requiring plug-flow characteristics and easy Clean-in-Place (CIP) maintenance Cooling: Yes Heating: Yes Temperatures: Depending on Connection Feed Pump: Mono Pump for Viscous Products CIP: This is cleaned through the CIP system Tube in Tube Legth: 13 meters including bends

Condition: refurbished (used), Year of construction: 2012, operating hours: 1,000 h, functionality: fully functional, overall weight: 100,000 kg, Pellet production line of Italian manufacture. Renown brands of machinery like General Dies SRL, Miller SRL, FIDA SRL and other brands. Capacity of the line 1.3 tons per hour Pellet press General Dies TAU4 – 110kw Container with movable floor and hydraulic power aggregate Triple-Pass rotary drum dryer 2.5 tons catalog capacity (effective capacity up to 1.5 tons/hour) Transport divider for biomass separation Pezzolato PTH 660/700 (Wood chipper, possibly excepted from the line if buyer wishes so) Furnace for rotary drum dryer and complementary equipment Hammer mill “Miller SRL” 75 kw Transport conveyors for biomass transport Cyclon for dust removal Nsdpfxji Akrke Akijlh Cooler silo for dust removal Weighing and packing equipment Electric cabinets for the entire line with cables Ventilation tubes for sawdust and wood chips transport Screw air compressor 860l Pump for grease dozing in central press lubrication system Included are additional pieces of equipment like filter silo bags, metal connections etc. (complete line is between 4 and 5 full trucks of equipment)

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: D714 HDB, Tetra Pak Tetra Centri D 714HGV Separator Manufacturer: Tetra Pak Model: Tetra Centri D 714HGV Machine Type: High-Capacity Centrifugal Separator Year of Manufacture: 2017 Capacity: Approx. 22,000 L/hr Condition: Used – Fully Functional Application: Dairy / Milk / Cheese Processing Location: Ireland Description Nodpfxezy Riye Akielh Tetra Pak Tetra Centri D 714HGV high-capacity centrifugal separator, manufactured in 2017 and previously installed in a large-scale dairy and cheese production facility. The D 714HGV is an industrial centrifugal separator designed for continuous processing in demanding dairy applications. The machine is suitable for high-throughput separation duties and can be used in milk, cream and other dairy-processing applications depending on its configuration. The unit is offered for sale following the decommissioning of the production facility and represents an opportunity to acquire a modern Tetra Pak separation system from an operational industrial plant. Key Specifications Manufacturer: Tetra Pak Model: Tetra Centri D 714HGV Year: 2017 Capacity: Approx. 22,000 L/hr Type: Industrial centrifugal separator Condition: Used Status: Fully functional prior to removal Industry: Dairy / Food Processing Previous Application: Cheese / Dairy Production Location: Ireland Suitable for a range of industrial dairy-processing applications, including: - Milk separation - Cream separation - Dairy processing - Cheese production - Whey processing - Food and beverage processing - High-throughput centrifugal separation Inspection: Available by appointment.

Condition: used, Year of construction: 2012, functionality: fully functional, Tetra Pak Separator 2012 Nljdpszy Rluefx Akieh

Condition: good (used), mileage: 645,064 km, power: 321 kW (436.44 HP), first registration: 08/2014, fuel type: diesel, tire size: 315 / 70 / R22.5, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, color: red, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, total length: 5,920 mm, total width: 2,550 mm, total height: 3,850 mm, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 11,500 kg, Equipment: ABS, air conditioning, central locking, cruise control, differential lock, electric window regulation, fog lights, power mirror, soot filter, spoiler, General information Cab: Space Cab Technical information Number of cylinders: 6 Engine capacity: 10.837 cc Transmission Transmission: ZF, 12 gears, Automatic Axle configuration Tyre size: 315 / 70 / R22.5 Make axles: DAF Brakes: disc brakes Front axle: Max. axle load: 8000 kg; Steering; Tyre profile left: 30%; Tyre profile right: 30%; Suspension: leaf suspension Rear axle: Double wheels; Differential lock; Max. axle load: 11500 kg; Tyre profile left inner: 30%; Tyre profile left outer: 30%; Tyre profile right outer: 30%; Tyre profile right outer: 30%; Reduction: single reduction; Suspension: air suspension Weights Empty weight: 7.487 kg Carrying capacity: 12.013 kg GVW: 19.500 kg Interior Interior: grey Number of seats: 2 Condition Technical condition: good Nedpfx Aksz Nvr Deielh Visual appearance: good Number of keys: 1 (1 hand transmitter) Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL = Additional options and accessories = - 12 volt socket - Aluminium fuel tank - Armrest - Baggage cover - Car kit - Low-noise - Particulate filter - Radio/CD player - Remote central locking - Spare wheel - Speed limiter - Stability control - Toolbox - Visor - Webasto

Condition: used, Year of construction: 2007, functionality: fully functional, Tetra Pak Pressvatic 1+2 – Pre-Press & Block Format System Manufacturer: Tetra Pak Model: Pressvatic 1+2 Machine Type: Cheese Pre-Press & Block Formatting System Application: Industrial Cheese Production Capacity: Approx. 1.8 tonnes/hour Condition: Used Location: Ireland Description: Nlodpfszy Rxhjx Akioh Tetra Pak Pressvatic 1+2 pre-press and block-format system designed for integration into high-volume industrial cheese production lines. The Pressvatic performs the preparation and pre-pressing of cheese curd prior to forming and cutting the cheese into production blocks. It is designed to provide controlled curd distribution, whey drainage, pre-pressing and block formatting as part of an automated cheese manufacturing process. The system is particularly suited to production of granular and round-eyed cheeses and can be integrated with upstream cheese vats and curd-handling equipment and downstream main presses. Key Features: - Tetra Pak Pressvatic 1+2 system - Automatic pre-pressing and block formatting - Approx. 1.8 tonnes/hour capacity - Designed for industrial cheese production - Automated curd distribution - Whey drainage system - Pneumatic pre-pressing - Cheese block forming and cutting - Stainless-steel food-processing construction - Designed for integration into automated cheese production lines - CIP-compatible hygienic design - Suitable for continuous industrial cheese manufacturing operations - Cheese Applications Suitable for production of a range of cheeses including: Gouda Edam Havarti Swiss-type cheeses Other granular and round-eyed cheeses Tetra Pak Pressvatic, Tetra Pak Pressvatic 1+2, Pressvatic 1+2, Tetra Pak cheese equipment, Tetra Pak cheese press, cheese pre press, cheese pre-press, cheese block former, cheese block formatting machine, cheese block forming machine, cheese production equipment, cheese pressing equipment, dairy processing equipment, cheese manufacturing equipment, industrial cheese equipment, used cheese machinery, used dairy equipment, Tetra Pak dairy equipment, 1.8 tonne cheese press, cheese production line, Gouda cheese equipment, Edam cheese equipment, Havarti cheese equipment, Ireland, Europe

Year of construction: 1985, condition: used, functionality: fully functional, PM 5 Paper Machine + Stock Preparation / Deinking Plant and Goebel U16M An integrated paper production installation in Hainsberg, Germany, is offered for sale. The PM 5 paper machine and its stock preparation/deinking plant are offered together. The Goebel U16M roll slitter rewinder is available separately. PM 5 was built in 1985 and modernised several times. Its main sections include the PAMA approach-flow system and Fourdrinier section; Voith headbox and SpeedFlow system; Valmet top-wire former; and PAMA press, dryer and after-dryer sections, calender and Pope reel. Reported modernisations: Valmet top-wire former (1994); approach-flow system expansion and modernisation (2002–2003); MAP quality-control system (2006); Voith SpeedFlow (2009); automatic tail cutter (2025). PM 5 specifications - Working width: approx. 2,730 mm; trimmed width: approx. 2,640 mm - Maximum speed: up to 600 m/min - Maximum gross capacity: approx. 150 tonnes/day - Basis-weight range: approx. 45–130 g/m² - Grades produced include office, copy, writing, printing, envelope and newsprint papers - Installed electrical power: approx. 2.5 MW - Steam consumption: up to approx. 16 tonnes/hour Stock preparation / deinking plant - Normal capacity: approx. 125 tonnes/day; up to approx. 140 tonnes/day under suitable raw-material and process conditions - Essential components listed in the available technical documentation are reported to remain installed on site - Older Siemens S5 and Teleperm control and automation system Goebel U16M Built in 2005, machine no. 053-9031. - Working width: 2,800 mm - Maximum speed: 2,000 m/min - Maximum unwind diameter: 2,000 mm - Maximum rewind diameter: 1,500 mm - Minimum cutting width: 150 mm - Available accessories include winding shafts and an edge-trim extraction system with shredder and flat turbo disintegrator Njdez Hvmhepfx Akielh Operating status and sale terms Production stopped on 23 January 2026. According to the seller, PM 5 and the stock preparation/deinking plant were operating until the controlled shutdown. The Goebel U16M was also reported operational until that date, with no significant functional faults. Asking prices: - PM 5 and deinking plant: €2,200,000 - Goebel U16M: €250,000, offered separately

Condition: like new (used), Year of construction: 2024, functionality: fully functional, wall material: stainless steel, Equipment: cooling unit, PRODUCTION REACTORS, COLLECTION TANKS, CONTROL PANELS WITH DRIVES, PLATFORMS, AND EQUIPMENT—SUITABLE FOR SYNTHETIC THICKENER PRODUCTION (AND OTHER CHEMICALS SUCH AS POLYMERS, ETC.)—MADE FROM HIGH-GRADE STAINLESS STEEL, ARE FOR SALE AND IN OPERATIONAL CONDITION. CONSULTANCY SERVICES CAN ALSO BE PROVIDED FOR THICKENER PRODUCTION UPON REQUEST. Acrylic thickeners, binders, alkyd resins can be produced, and formulations can be supplied with the sale. The machines are available as a complete set or can be sold separately. Suitable for chemical production in all industrial sectors including textiles, food, cosmetics, construction, etc. 1. REACTOR - 17-ton capacity reactor - Barely used - 316 stainless steel (tank wall 10-12mm, domes 10-12mm thickness) - 37kW ATEX-rated motor with gearbox - Electrical control panel with Delta inverter - External coil for heating and cooling - Currently heated by thermal oil, cooled by chiller cold water - Equipped with load cells, calibrated for accurate measurement - All flanges and fittings included, fully connected - Platform included 2. REACTOR - 22.5-ton capacity reactor - Made from 304 stainless steel / 8mm tank wall, 10mm dome thickness - Unused - 22kW motor and reducer - Electrical control panel with Delta inverter - External coil and jacket for heating and cooling - Equipped with load cells, calibrated for accurate measurement - All flanges and fittings included, fully connected - Platform included 3. STORAGE/FEED TANK Nsdsy Aggpspfx Akiolh - 10-ton capacity 304 stainless steel storage/feed tank - Unused - 8mm dome, 6mm wall thickness - Full-length sight glass system to monitor product level inside - All flanges and fittings included, fully connected *Can be converted to a mixer/stirrer by adding a motor and shaft. 4. HOMOGENIZER/DISPERSING/MIXING TURRAX - IKA brand - ATEX certified - 17 L/hour, 30 kW/10 bar Note: These systems are designed for the production of thickeners used in printing and many other industries. All parts have been manufactured and supplied by experts in the field, meticulously engineered with no compromise on quality. Motor selection, sheet thickness, inverters, and other systems are of top quality and will operate problem-free for the buyer. For more detailed information, please contact us.

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, TECHNICAL DETAILS Process Flow Continuous feeding of copper wire via an automatic double unwinder with flying splice capability Nsdpfxoz N A Npo Akiolh Inductive wire preheating for moisture removal and improved adhesion Full insulation using a Rosendahl Automotive main extruder and a highly precise crosshead die Cooling and extraction Multi-stage, temperature-controlled telescopic water cooling trough for stress-free solidification of the plastic Synchronized precision caterpillar puller for consistent line speed Quality assurance and winding Laser diameter and ovality measurement Eccentricity measurement for monitoring consistent wall thickness High-voltage spark tester for real-time fault detection Uninterrupted winding onto process drums MACHINE DETAILS Machine type: High-speed full insulation line Design: Fully automatic system for thin-walled vehicle lines Year of manufacture: 2020 EQUIPMENT Automatic double unwinder with flying splice capability Inductive wire preheating Rosendahl Automotive main extruder Highly precise crosshead die Temperature-controlled telescopic water cooling trough Precision caterpillar puller Laser diameter and ovality measurement Eccentricity measurement High-voltage spark tester Automatic double spool winder

Condition: used, Year of construction: 1998, Window manufacturing system Manufacturer: Weinig Type: Unicontrol 10-5 Year of manufacture: 1998 Technical data Working width: 40 - 220 mm Working height, longitudinal machining: 40 - 100 mm Working height, transverse machining: 40 - 100 mm (80 mm counterpiece height) Workpiece length, longitudinal machining: min. 220 mm + 2 x tenon length Workpiece length, transverse machining: min. 275 mm + 1 x tenon length at 320 mm tool diameter Feed (transverse machining) Motor power: 0.3 kW Feed speed: 3 - 25 m/min Workpiece clamping: by means of 2 clamping jaws Length stop: with scale and magnifying glass for frame or sash outer dimensions Counterpiece: pneumatically controlled - 4 positions - (not for studio windows) up to a wood height of max. 80 mm Double part package: For single or double part feeding. With transverse separation and retention system 1. Wood (lying against the stop) Wood width: 55 - 90 mm 2. Wood Wood width: 130 mm Feed (longitudinal machining) Motor power: 2.2 kW Feed speed: 4 - 18 m/min (continuously variable via frequency converter) Feed roller spacing: 100/120 mm Feed roller width: 30/50 mm Feed roller diameter: 95 mm Machining units Cut-off saw Motor power: 3 kW Spindle diameter: 40 mm Spindle speed: 2800 rpm Nsdpfxozuyxgo Akielh Tool circle diameter: max. 400 mm Adjustment, axial: pneumatically controlled against a 4-position turret 1. Tenon and mortise spindle Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 3250 rpm Tool circle diameter: max. 320 mm Tool clamping length: 320 mm Adjustment, axial: 240 mm Number of tools: 4 x 80 mm Axial adjustment: hydraulic 1. Profiling spindle Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6000 rpm Tool diameter: max. 232 mm Tool zero circle diameter: 130 to 140 mm Tool clamping length: 320 mm Adjustment, axial/radial: 240/80 mm Number of tool positions: 4 x 80 Axial adjustment: hydraulic 2. Profiling spindle Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6000 rpm Tool diameter: max. 232 mm Tool zero circle diameter: 130 to 140 mm Tool clamping length: 320 mm Adjustment, axial/radial: 240/80 mm Number of tool positions: 4 x 80 mm Axial adjustment: hydraulic 2 Mechanical spindle brake for profiling spindle 3 Mechanical spindle brake for cut-off saw and profiling and sawing units Profiling milling unit (horizontal, top) before the last profiling spindle radially controlled to 2 positions axially controlled to 2 positions Motor power: 3 kW Spindle diameter: 40 mm Spindle speed: 5850 rpm Tool circle diameter: 130 mm Tool clamping length: 40 mm Adjustment, axial: 52 mm Adjustment, radial: 125 mm Profiling milling unit (vertical, right) at the end of the machine radially controlled to 2 positions axially controlled to 2 positions Motor power: 3 kW Spindle diameter: 40 mm Spindle speed: 5850 rpm Tool circle diameter: 210 mm Tool clamping length: 160 mm Adjustment, axial: 90 mm Adjustment, radial: 100 mm Length, tenon and mortise spindle with 640 mm tool clamping length (instead of 320 mm spindle) Motor power: 15 kW Spindle speed: 2925 rpm Number of tool positions: 8 x 80 mm Adjustment, axial: 560 mm Laser alignment light for cut-off saw for detecting the section Studio window configuration Swiveling length stop +/- 60 with electronic digital display and pneumatic clamping Sliding counter rail Special pressure pad for angled part production Limitation: Wood thickness max. 120 mm At -60 position: Workpiece width max. 110 mm with 80 mm tenon length, or max. 150 mm with counter profili

Condition: like new (used), Year of construction: 2009, operating hours: 467 h, functionality: fully functional, Plow and play. Very low-hours, fully equipped mobile dry ice production plant: Total operating time for the pelletizer is 467 hours. The last full service was performed in 2026. Pelletizer * Mobile, containerized manufacturing system * "Production HUB with Triventek PE80 pelletizer, 80 kg/h" (Denmark), built into a portable container with lighting. * ISO CO2 tank, 8 m3, portable on a frame, manufacturer: Wessington Cryogenics Ltd, England. * 3 pieces of thermo containers, 200 kg capacity each. New price: €250,000 Nledpfx Aey R I Tmskish * All manufactured in 2009, but very little used. Mobile & Modular: Built directly into a 10-foot High Cube ISO shipping container, it can be easily transported to rugged or remote locations. Worldwide shipping. Cold Jet dry ice machine for sale, dry ice machine for sale, dry ice blasting machine for sale, buy dry ice blasting machine, dry ice blaster for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, second-hand dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, mold cleaning without disassembly, paint removal with dry ice, coating removal with dry ice, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high-pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice.

Condition: good (used), Schmedt hardcover book production line The machines are in very good condition and have seen little use. The set consists of the following machines: – Schmedt PraLeg book block casing-in machine – Schmedt PraForm Pro book press and joint-forming machine Njdpfez S Uziox Akijlh – Schmedt SC-3 Autocase cover assembly table – Schmedt PraziCoat Pro gluing machine (coater) – Schmedt BT-1 Board Trimmer (automatic board cutter) Includes documentation, spare parts, and glue.

Condition: good (used), mileage: 324,564 km, power: 355 kW (482.67 HP), first registration: 10/2021, fuel type: diesel, tire size: 385 / 65 / R22.5, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, color: red, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6e, suspension: steel-air, total length: 6,160 mm, total width: 2,550 mm, total height: 4,000 mm, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 11,500 kg, Equipment: ABS, air conditioning, central locking, cruise control, differential lock, electric window regulation, fog lights, fridge, power mirror, second fuel tank, soot filter, spoiler, General information Number of doors: 2 Cab: Super Space Cab Technical information Number of cylinders: 6 Engine capacity: 12.902 cc Transmission Transmission: ZF, 12 gears, Automatic Axle configuration Make axles: DAF Brakes: disc brakes Front axle: Tyre size: 385 / 65 / R22.5; Max. axle load: 8000 kg; Steering; Tyre profile left: 50%; Tyre profile right: 50%; Suspension: leaf suspension Rear axle: Tyre size: 315 / 70 / R22.5; Double wheels; Differential lock; Max. axle load: 11500 kg; Tyre profile left inner: 50%; Tyre profile left outer: 50%; Tyre profile right outer: 50%; Tyre profile right outer: 50%; Reduction: single reduction; Suspension: air suspension Weights Empty weight: 8.239 kg Carrying capacity: 11.261 kg GVW: 19.500 kg Interior Interior: grey Number of seats: 2 History Number of owners: 1 Condition Technical condition: good Visual appearance: good Number of keys: 1 (1 hand transmitter) Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL = Additional options and accessories = - 12 volt socket Node Afb A Sspfx Akijlh - Aluminium fuel tank - Armrest - Baggage cover - Car kit - Low-noise - Particulate filter - Radio, MP3 enabled - Radio/CD player - Remote central locking - Speed limiter - Spotlights - Stability control - Toolbox - Visor - Webasto - Xenon lighting

Year of construction: 2018, operating hours: 350 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: SPZ6M, COMPLETE EPS PRODUCTION LINE – FANGYUAN / ICI SIXEN – 2018 Complete EPS production installation suitable for moulded EPS products, including pre-expansion, shape moulding, insert/in-mould capability, storage silos, cooling-water system and steam-generation equipment. The line was purchased new in 2018 and has had relatively limited use. It is currently installed and can be inspected before dismantling. MAIN EQUIPMENT INCLUDED FANGYUAN SPJ90A BATCH PRE-EXPANDER Automatic batch EPS pre-expander with density control, dryer and conveying system. • Expansion chamber: Ø900 mm • Density range: approx. 12–90 g/l • Capacity: up to approx. 720 kg/h depending on density • Steam pressure: 0.6–0.8 MPa • Connected load: 16.75 kW • Typical cycle: approx. 60–70 sec • Suitable for white and grey EPS • Approx. 16,000 kg total EPS processed • Approx. 800 production cycles FANGYUAN SPZ6M AUTOMATIC SHAPE MOULDING MACHINE Special configuration for moulded products with inserts / in-mould applications. • 6 positions per cycle • Twin steam chamber • Moving twin mould system • In-mould capability • Maximum moulding area: 720 × 1270 mm • Max. individual position: 330 × 250 mm for 6 positions • Max. depth: 180 mm • Cycle time: approx. 100–150 sec • Connected load: 13.5 kW • Machine weight: approx. 6,000 kg • Overall dimensions: approx. 5000 × 5100 × 3700 mm • Schneider touchscreen / Mitsubishi PLC • Approx. 350 total operating hours FANGYUAN SPZ80K AUTOMATIC EPS SHAPE MOULDING MACHINE WITH VACUUM Originally supplied as SPZ900K. • Moulding area: 840 × 720 mm • Up to 4 individual mould positions • Steam pressure: 6–8 bar • Steam consumption: approx. 6 kg/cycle • Compressed air: 1.2 m³/cycle • Cooling water: 40–120 L/cycle • Connected load: 10.6 kW • Approx. dimensions: 4500 × 1640 × 2700 mm • Approx. weight: 4,000 kg • Approx. 53,300 recorded machine cycles EPS STORAGE SYSTEM • 6 × approx. 25 m³ silos • Approx. 150 m³ total storage capacity COOLING-WATER SYSTEM • Cooling tower approx. 100 m³/h • 1 low-pressure + 2 high-pressure pumps • Fangyuan DN150 stainless-steel water filter STEAM-GENERATION SYSTEM A complete European steam-generation system is potentially available with the installation, including ICI SIXEN 500 kg/h steam generator, Riello natural-gas burner and related auxiliaries. The exact steam-system scope included in the final sale can be agreed with the buyer, as some components may be retained depending on the final configuration. OTHER INFORMATION • Year: 2018 • CE equipment • Manuals and technical documentation available • Photos and videos available • Inspection possible before dismantling • Preference for sale as a complete line • Dismantling, loading, transport and reinstallation can be discussed separately • Moulds are not included unless specifically agreed Nlsdpfx Aoz A Dxkekish A detailed PDF with the complete technical description and equipment specification has been uploaded in the Documents section of this listing. Estimated equivalent replacement cost today: approximately EUR 330,000–380,000 Preference will be given to the sale of the complete production line, but individual machines and components can also be offered separately upon request.

Condition: good (used), Year of construction: 2018, functionality: fully functional, total height: 2,100 mm, total width: 1,100 mm, total length: 1,300 mm, overall weight: 800 kg, REF: MM5446 Njdpfxjx Dbkce Akiolh Borelli Group S.r.L. inline rotary filling machine suitable for filling glass bottles. This is a standard 10-head rotary filler with complete CIP kit for cleaning, including dummy bottles and washing spray system. Also supplied with filler in-feed scroll and bottle handling parts for Bordeaux glass bottles. Technical specification: ✅ Manufacturer - Borelli Group S.r.L ✅ Model - RMC10. ✅ Date of manufacture - 2018. ✅ Speed - up to 1500 bottles/hour (for 750ml bottles). ✅ Throughput - 1300 litres/hour. ✅ Filling system - Pure gravity. ✅ Speed variator - Inverter. ✅ Voltage - 415 V / 50 hz / 3 phase. ✅ Pneumatic supply - 3-6 bar. ✅ Power - 4.8 kW. ✅ Weight - 800 kg. ✅ Dimensions - 1300 x 1100 x 2100 mm (L x W x H). ✅ Bottle formats - 750ml glass bottles: clear (Ø74 mm x 302 mm high) and green Burgundy (Ø83 mm x 297 mm high). ✅ Intended use - still (non-sparkling) liquids. Supplied for wine. EU Declaration of Conformity (Machinery Directive 2006/42/EC) and operating manual available.

Condition: good (used), Year of construction: 2018, Alfa Laval SRU2/018/LS Lobe pump Nodpfe Ad Rdvjx Akijlh 2018, stainless lobe pump on skid, with 1.1Kw motor, 3Ph

Condition: excellent (used), functionality: fully functional, Complete machine park for sale, consisting of: Holzher machine park in like-new condition (in operation since 6/2024), consisting of: Tectra 6120 Dynamic beam saw, automatic panel storage system Storemaster 5110 (approx. 12x18m), Nextec 7705 nesting machining center, Weinig Dimter Opticut S60 optimizing miter saw (year of manufacture 2009), including waste conveyor (new, in operation since 6/2024). Nestro dust extraction system (in operation since 06/2024), consisting of: filter tower 11 kW + 7.5 kW (15,000 m³/h), briquetting press, shredder, piping for all machines, various pipe diameters. Mobile dust extraction unit Holzkraft RLA160, 2x mobile dust extraction units ASA2553 or similar. 2x Renner compressors, each 7.5 kW (1x new, in operation since 06/2024). 1x Ayen multiple drilling machine, special construction with 2.5m stop rail. 1x Cesab B625 electric forklift, 2.5 tons (year of manufacture 2014), 2x electric high-lift pallet trucks Toyota/BT (year of manufacture), 3x electric high-lift pallet trucks Cesab including initial lift (year of manufacture 2025). Various work tables, templates, pallet racks, material carts, etc. BeA various nailers & staplers. Various electric power tools, vacuum cleaners from Festool, Bosch Professional, etc. Bench drill Stürmer. Festool table saw. Bosch large panel miter saw on stand. EUR 530,000,- net (Total price EXW (ex works) for self-dismantling/collection). If you are seriously interested, we can gladly provide pictures and details of the individual items. Nledpszh Hw Ajfx Akieh

Condition: excellent (used), Year of construction: 2016, ELOPAK Shikoku S-PS60EC Carton Filling Machine Year: 2016 The ELOPAK Shikoku S-PS60EC is a reliable, industrial-grade carton filling machine designed for the forming, filling, and sealing of gable-top cartons for liquid food products. Manufactured by Elopak in cooperation with Shikoku Kakoki, this machine reflects the proven engineering and hygiene standards for which both companies are globally recognized. Key Capabilities: -Gable-top carton forming, filling, and sealing in a single integrated system -Suitable for liquid products such as milk, juices, water, and other chilled beverages -Designed for medium-to-high output production, typically up to ~6,000 cartons per hour (depending on configuration and carton size) -Compatible with common carton volumes, generally ranging from 250 ml to 1,000 ml -Blank-fed operation with precise carton forming prior to filling Njdpoyxgxksfx Akijlh -Hygienic & Robust Design The S-PS60EC is built for food-grade production environments, featuring: -Stainless steel construction in product contact areas -Hygienic design suitable for dairy and beverage applications -Automated filling accuracy and consistent sealing quality -Designed for clean-in-place (CIP) integration, depending on configuration Cartoning Machine is located at former dairy in the South of Ireland. The machine is still on location and viewing can be arranged. The site is reachable by Shannon International Airport & Cork International Airport. Contact for more information.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: Hersteller: A·S·T·A Eismann GmbH Food Technology • Typ: DLP • Baujahr: 2017, Manufacturer: A·S·T·A Eismann GmbH Food Technology • Type: DLP • Year of manufacture: 2017 • Machine number: 903758 • Throughput: up to approx. 2,000 l/h • Siemens S7 with touchscreen • Heat recovery and product pump • Feed tank: 100 l • Double jacket: 30 l • Operating pressure tank/double jacket: max. 6/3 bar • Temperature tank/double jacket: max. 90/100 °C • Stainless steel design, CE marking HOMOGENIZER: • Manufacturer: Bertoli S.r.l. • Type: H3007 • Year of manufacture: 2001 Nljdpfx Ake Adrqqjioh • Serial number: 1784 • Capacity: up to approx. 1,200 l/h • 7.5 kW, 380 V, 50 Hz, 15.4 A • Maximum working pressure: 18 MPa or 180 bar

Condition: used, Year of construction: 2011, functionality: fully functional, input voltage: 400 V, RADEMAKER / RONDO Topline ASTec.W industrial line – Production of layered and filled products Complete RADEMAKER / RONDO industrial line for sheeting, gauging, shaping, filling, and cutting dough products. The equipment was previously used for the industrial production of salmon en croûte. Thanks to its modular design and numerous workstations, it can be adapted to other pastry, viennoiserie, and savory or sweet layered product productions, subject to the necessary tooling and adaptations. 1. RADEMAKER Block Processor – 2006 Industrial equipment designed for the gradual reduction of dough blocks into a homogeneous strip, particularly for processing layered dough blocks. Type: Block Processor Year: 2006 Serial number: 280053 Working width: 650 mm Belt width: 650 mm Weight: 1,725 kg Power supply: 240/415 V, three-phase, 50 Hz, 17 A Documented dimensions: 6,000 × 1,400 × 2,850 mm 2. RONDO Topline ASTec.W Industrial line for shaping and preparing filled products. Model: Topline ASTec.W Line reference: D2147 Manufacturer documentation: edition 01/2012 ASTec hygienic design adapted for wet cleaning. Documented composition: Dough feeding and conveying belts. Two RONDO flour dusting devices. RONDO laminator, working width 740 mm, belt 700 mm. Nsdpfe Abz D Iox Akijlh 15-meter industrial shaping table, 700 mm belt, with marking, cutting, and spraying devices. RONDO Rondofiller dosing unit for filling application. Overlay conveyor for working with two layers of dough. Gauging unit. RONDO ZST600 cutting station. RONDO station, model ZKWA605A.A, year 2011, machine number D1221401, working width 660 mm. RONDO guillotine, model ZGEM700W.A, year 2009, machine number C9273305, with documented tooling of five 80 × 125 mm dies. Dough scrap recovery system. Electrical control cabinet and Siemens operating interface. 3. Applications The line was used for the production of products based on salmon wrapped in dough. It also offers possibilities for adaptation to various layered products, turnovers, pastries, filled specialties, and preparations involving two layers of dough. Other applications can be considered depending on the cutting, shaping, and dosing tools available or to be installed. 4. General characteristics Manufacturers: RADEMAKER / RONDO Years of major equipment: 2006, 2009, and 2011 Total length of the documented configuration: approximately 24 meters Documented maximum width: approximately 2 meters Documented maximum height: approximately 2.85 meters Width of production conveyors: up to 700 mm depending on the section Technical documentation and manufacturer's manuals available. Industrial line consisting of several modules that can be considered for adaptation to other productions. The exact composition, available accessories, and production possibilities must be confirmed during technical inspection.