Used Production Of Construction Materials for sale (45,192)

Condition: reconditioned (used), functionality: fully functional, power: 110 kW (149.56 HP), Equipment: documentation/manual, Complete refurbished Amandus Kahl C35-780 pellet press production line Complete production line featuring a fully refurbished Amandus Kahl C35-780 pellet press. The Amandus Kahl C35-780 pellet press has recently undergone a complete overhaul at the Amandus Kahl factory. All documentation for the newly replaced parts is available. An overview of these parts can also be found among the photos. The production line consists of: - Amandus Kahl C35-780 pellet press - New 110 kW electric motor on the pellet press - Electrical control cabinet with emergency stop, including complete electrical documentation - Conveyor belt - Screening and cooling system that screens the pellets and cools them automatically - Hydraulic nut - Roller head in perfect condition - Including electrical wiring - Feed screw that transports the material to the pellet press - Automatic dosing system that measures the amount of pellets for filling, for example, a big bag - 4 extra dies with 6 mm holes - 60 liters of extra synthetic oil Overview of the parts replaced during the overhaul: - 7 new bearings - 2 new wear rings - 1 new air filter Bodj Agk Rispfx Akisdi - 2 new oil seals - 1 new oil filter - 1 new oil pump - 20 liters of synthetic oil 800/460 - 1 new pressure piece for the main shaft Do you have any questions or would you like to inspect the complete production line? Please feel free to contact me. Sincerely, Danny van Tol Inventtol B.V.

Year of construction: 2011, condition: excellent (used), functionality: unexamined, machine/vehicle number: 24, For sale: Mixer – Raw material mixer from a pellet production line. Thanks to the mixer, the raw material fed into the pelletizers is homogeneous. Capacity of the line in which the mixer was used: approximately 8 tons/hour. Mixer dimensions: External length: 6150 mm, External width: 1760 mm, External height: 2740 mm, Internal length: 5000 mm, Internal width: 1490 mm, Internal height: 1750 mm, Rib diameter: approximately 1400 mm, 22 kW motor, Bodpfx Aowxatbokijdi Mixer price: 23,000 Euros, We offer a bag filter for the mixer, visible in the photos of the production line. Filter price: 7,000 Euros, The machine can be viewed in: Sępólno Krajeńskie, Kuyavian-Pomeranian Voivodeship, Poland.

Condition: used, Vötsch Type: VBT 03/500 Air-cooled, with separate cooling unit Material testing chamber with water flooding and spraying system for freeze-thaw cycling tests The Vötsch VBT 03/500 is suitable for testing the frost and temperature resistance of construction materials such as concrete, bricks, clinker, natural stone and tiles. Technical description: Data for temperature tests without water: Temperature range -30°C to +80°C Temperature deviation in the steady state according to IEC 60068-3-5, depending on the test chamber temperature Time-dependent ± 1 K Temperature change rate according to IEC 60068-3-5 Heating: approx. 2 K/min Cooling: approx. 2 K/min Data for temperature tests with water Temperature range +5°C to +80°C Possible water level -10 mm to 540 mm Water level = -10 mm Bjdezh D S Repfx Akiodi The water level is below the support grid Water level = 0 mm The water level is at the top edge of the support grid Data for standard spraying system Number of spray nozzles 6 Spray rate per nozzle 0.5 l/min Data for spraying system according to EN 539-2, Method B Number of spray nozzles 6 Spray rate per nozzle 4.5 l/min Additional flooding nozzles 2 Spray rate additional nozzle 6 l/min Compressed air consumption approx. 3 m³/h Data for water tank with preheating Volume approx. 2000 l Temperature range for preheating +5°C to +40°C Temperature change duration Cooling from +18°C to +5°C approx. 15 h Heating from +15°C to +40°C approx. 10 h Additional cooling unit: Manufacturer: Alfa Laval Type: ACL501AS BO 2L Year of manufacture: 2009 Weight: 140 kg Design: Unit with fan Data for installation and operation: Test chamber: Width 1120 mm, Depth 840 mm, Height 540 mm Housing: Width 2700 mm, Depth 1300 mm, Height 1575 mm Water tank: Width 1100 mm, Depth 800 mm, Height 2200 mm Feedthroughs 1 feedthrough ∅ 50 mm, installed on the left Test chamber volume: approx. 500 liters Refrigerant R-404a Electrical connection: Rated voltage 3/N/PE AC 400V ± 10% 50Hz Rated power approx. 26 kW Rated current approx. 44.0 A (neutral conductor loaded) Fuse 63 A gG, to be provided by the customer Weight approx. 890 kg net For your safety as a buyer, please note the following: The following points will be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: like new (used), For industrial use, tumbler loading systems are commonly utilized across various industries such as the food industry (especially bakery and meat processing), pharmaceutical industry, chemical industry, and others where precise mixing, rotation, or material processing is required. These machines offer high capacity, accuracy, and safety within automated production lines. High Capacity Adjustability Automatic Loading and Unloading Systems Temperature and Humidity Control Drive System Materials and Construction Safety Systems Integration with Automated Systems Adaptability and Flexibility Energy Efficiency Bedjzbk R Iepfx Akijdi

Condition: excellent (used), mileage: 285 km, power: 345 kW (469.07 HP), first registration: 05/2025, fuel type: diesel, tire size: 385/65-22,5, axle configuration: 6x2, wheelbase: 4,900 mm, fuel: diesel, fuel tank capacity: 510 l, color: white, driver cabin: sleeper cab, gearing type: automatic, suspension: steel-air, loading space length: 66,000 mm, loading space width: 24,700 mm, loading space height: 10,000 mm, Equipment: ABS, AdBlue, Bluetooth, EBS, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, navigation system, onboard computer, parking heater, power mirror, seat heater, soot filter, trailer coupling, - Aluminum fuel tank - Rear work lights - Heated exterior mirrors Bjdpez Ilgyofx Akiodi - Heated mirrors - Co-driver's seat - Differential lock - High beam headlights - Low noise - Speed limiter - Catalytic converter - Automatic climate control - Refrigerator - LED lighting - Air suspension - Air-suspended seats - Particle filter - PTO (Power Take-Off) - Radio/Multimedia system - Disc brakes - Sunroof - Sleeper cab - Seat heating - Sun visor - Lane keeping assist - Stability control - Auxiliary heater - Automatic heating system - Toolbox - Windshield - Additional steering axle Internal number for customer inquiries: 3-426 Volvo FH 460 6x2-4 construction tipper with Fassi or Palfinger loading crane, each with day registration. Immediately available, depending on crane type and size (subject to prior sale). Immediately available at a special price. Volvo FH 460 6x2-4 FH Globetrotter - Safety cab Long-haul version with a lower sleeping berth Engine 13 l, 469 hp / 345 kW, 2346 Nm, Euro 6 Stage E Automatic transmission I-Shift, 12-speed I-Shift driving mode: Standard, Performance and Economy VEB+ Volvo Engine Brake Suspension: leaf spring / air Tag axle, electro-hydraulically steered and liftable Tire size, front and tag axle: 385/65 R 22.5, drive axle: 315/80 R 22.5 Wheelbase 4,900 mm Trailer hitch ROCKINGER 400 G 150 Active Safety Package: ACC adaptive cruise control, driver alert system, lane change assist, lane keeping assist LED main headlights LED taillights Driver's seat, comfort, air-suspended, heated, seatbelt integrated in the seat Automatic climate control Auxiliary heater Cool box with freezer compartment 33 l High instrument cluster with digital, fully dynamic driver information display, 4 views selectable Traffic sign recognition (in conjunction with LSS-DW (lane keeping assist)) Size: 12 inches with chrome trim Second driver information display, 9" touch color display and more Body: Modern construction pallet body Body dimensions L x W x H: 6600 x 2480 x 1000 mm Side boards, 1x divided (2 flaps) per side with side board release, including sliding folding steps Substructure: 45° perforated outer frame is designed as a steel welded structure. KTL & powder coated and/or hot-dip galvanized Lashing rail recessed in the center in the direction of travel 4x work lights 1x toolbox Loading crane: Fassi or Palfinger Various crane sizes / crane types and designs in stock. This is a non-binding offer. Subject to prior sale, errors and changes. General information Cab: Long-distance transport Technical information Number of cylinders: 6 Engine displacement: 12,777 cc GVWR: 26,000 kg Axle configuration Brakes: Disc brakes Front axle: Tire size: 385/65-22.5; Steered; Suspension: Leaf spring suspension Rear axle 1: Tire size: 315/80-22.5; Differential lock; Suspension: Air suspension Rear axle 2: Tire size: 385/65-22.5; Lift axle; Steered; Suspension: Air suspension Functional Crane: Rear of the chassis Body brand: PAVIC construction premium tipper with rear loading crane Condition Technical condition: very good...

Condition: like new (used), Year of construction: 2022, Stationary concrete mixing plant / concrete mixing system with silos and aggregate dosing system For sale is a comprehensive, stationary concrete mixing plant with cement silos, aggregate dosing system, and mixing technology, which was last used in a research laboratory for concrete. The plant was designed for the production and processing of various concrete mixes and features several coordinated system components for storing, dosing, and processing the required raw materials. Due to its modular design, the plant is suitable for use both in concrete production and for research and experimental purposes. Technical data and equipment Type of plant: Stationary concrete mixing plant / concrete mixing system Application area: Concrete production, test mixes, and material research Plant origin: Concrete research laboratory, Limex Werk, Geringwalde Construction: Stationary steel structure Date of purchase according to invoice: September 2022 Original invoice amount: €236,500 net Plant components 1. Cement silo system Two externally installed, vertical silo containers Conical silo lower sections with discharge devices Steel substructures with supports Access ladder and upper maintenance platforms Piping and conveyor connections 2. Aggregate dosing system Multi-chamber storage and dosing system for aggregates Several side-by-side material hoppers Steel frame structure with bracing Discharge and dosing devices Conveyor technology below the material hoppers Electrical drive components 3. Mixing plant / mixing technology Stationary concrete mixer inside the production hall Material feed hoppers arranged above Material feed via hopper and conveyor systems Steel structure with work and maintenance platform Bdjdpe Ahnrtefx Akisi Side staircase with railings Piping and connection systems Electrical drive and control components Condition and further information The plant is currently in an assembled state. The main plant components can be seen in the accompanying pictures. A current functional test and an inspection for completeness have not been documented. Information on production output, mixer volume, and the capacities of the silos and dosing hoppers are not currently available. The plant is offered in its existing condition, as is, at its current location. Dismantling, loading, and transport are to be organized and carried out independently by the buyer, unless otherwise agreed. An inspection of the plant is possible after prior appointment and is highly recommended. Subject to prior sale, changes, and errors!

Condition: good (used), mileage: 117,364 km, power: 335 kW (455.47 HP), first registration: 06/2019, fuel type: diesel, axle configuration: 6x2, fuel: diesel, fuel tank capacity: 255 l, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro6, number of seats: 2, loading space length: 6,610 mm, loading space width: 2,490 mm, Equipment: ABS, air conditioning, central locking, crane, cruise control, electric window regulation, navigation system, power mirror, soot filter, tachograph, trailer coupling, = Additional options and accessories = - 12-volt socket - Aluminum fuel tank - Armrest - Remote central locking - Speed limiter - Radio - Rear view camera - Sun visor - Lane keeping assist - Power take-off (PTO) - Tow hitch = Additional information = General information Number of doors: 2 Model year: 2026 Technical information Torque: 2200 Nm Bsdpfxewmnwwj Akiedi Number of cylinders: 6 Engine displacement: 10,677 cc Transmission: Mercedes-Benz G211-12, 12 gears, automatic Axle brand: Anders Front axle: Steered Weights Unladen weight: 15,250 kg Payload: 10,750 kg GVWR: 26,000 kg Functional Crane: MKG HLK 221 A3 including stone/pallet clamp, year of manufacture 2019, at the rear of the chassis Interior Interior: black Maintenance APK (technical inspection): New TÜV (technical inspection) upon delivery Condition Technical condition: good Optical condition: good Number of keys: 2 (2 remote controls) Financial information Inquire about financing options Product safety Manufacturer: Oostland Automobielen Wasaweg 22 9723JD GRONINGEN, NL

Condition: used, Year of construction: 2022, functionality: fully functional, Complete set of equipment for foam production and converting – HYMA and supplementary equipment Offer description For sale is a comprehensive set of machines and equipment for the production, processing, and converting of foams, including equipment for foaming, granulation, storage, sheeting, processing of cylindrical blocks, and precision cutting. The offer includes machines from renowned manufacturers, including HYMA, as well as auxiliary and installation equipment. The set allows for the implementation of many stages of the technological process – from foaming and material processing to its treatment and cutting. Most of the equipment dates from 2021–2022. The offer also includes an unused steam generator and an unused prepolymer tank. 1. Equipment for production and material preparation Bsdj Agwbaspfx Akijdi 1.1 HYMA BFH-15 foaming line (2021) Three foaming stations: - two stations for rectangular blocks with dimensions 2080 × 1080 mm and 2080 × 1580 mm, - one station for cylindrical blocks with a diameter of 1400 mm and a maximum height of 2100 mm. Two-screw mixer with a volume of 15 m³. Maximum foam density: 300 kg/m³. 1.2 HYMA GMK-80 granulator (2021) Main motor power: 55 kW. Interchangeable screens: Ø 5, 10, 20 and 25 mm. Output: approx. 1000 kg/h with a 25 mm screen. Conveyor fan: 15 kW. Loading belt conveyor: 1 kW. 1.3 HYMA GMP-75 granulator (2021): Motor power: 75 HP (approx. 55 kW). Interchangeable screens: Ø 5, 10, 20 and 25 mm. Output: approx. 500 kg/h. 1.4 HYMA GFH-330/7 silo (2021) Capacity: 45 m³. Height: 5300 mm. Diameter: 3300 mm. 2. Equipment for sheeting and processing of foam blocks 2.1 HYMA SSB precision sheeting machine for single blocks (2021) Maximum sheeting height: 105 cm. Maximum foam density: 250 kg/m³. HYMA SCH-700 carousel sheeting machine (2021) 2.2 Carousel structure for sheeting foam blocks. Table diameter: 7000 mm. 2.3 HYMA RH drilling machine for cylindrical blocks (2021) Equipment for drilling cylindrical foam blocks. 2.4 HYMA RSS-220 machine for trimming cylindrical blocks (2021) Equipment for trimming and processing cylindrical foam blocks. 3. PTV WJ2116-1Z-Dynamite CNC waterjet cutter (2022) Cutting with a pure water jet, without the addition of abrasive material. "Dry" work tank. Interchangeable tables. Working area: 2100 × 1600 mm. 4. Auxiliary and installation equipment 4.1 CERTUSS Universal 850 TC steam generator (2022) Nominal steam output: approx. 850 kg/h. Thermal power: approx. 558 kW. Includes a water treatment station. Status: unused. 4.2 Prepolymer tank (2022) Nominal capacity: 20 m³. Status: unused. Summary The offer includes 11 items of equipment and production equipment, intended for use in a plant that manufactures and processes foams. The set may be of interest to manufacturers planning to expand existing production capacity, start a new plant, or acquire equipment for subsequent stages of the technological process. Year of equipment production: 2021–2022. Sale: preferably as a complete equipment package. The possibility of purchasing individual equipment requires agreement with the seller. Detailed information regarding the technical condition, availability, location, and terms of sale will be provided to interested buyers.

Condition: excellent (used), Year of construction: 2016, ELOPAK Shikoku S-PS60EC Carton Filling Machine Year: 2016 The ELOPAK Shikoku S-PS60EC is a reliable, industrial-grade carton filling machine designed for the forming, filling, and sealing of gable-top cartons for liquid food products. Manufactured by Elopak in cooperation with Shikoku Kakoki, this machine reflects the proven engineering and hygiene standards for which both companies are globally recognized. Key Capabilities: -Gable-top carton forming, filling, and sealing in a single integrated system -Suitable for liquid products such as milk, juices, water, and other chilled beverages -Designed for medium-to-high output production, typically up to ~6,000 cartons per hour (depending on configuration and carton size) -Compatible with common carton volumes, generally ranging from 250 ml to 1,000 ml -Blank-fed operation with precise carton forming prior to filling -Hygienic & Robust Design Bedpfoyxgxkex Akisdi The S-PS60EC is built for food-grade production environments, featuring: -Stainless steel construction in product contact areas -Hygienic design suitable for dairy and beverage applications -Automated filling accuracy and consistent sealing quality -Designed for clean-in-place (CIP) integration, depending on configuration Cartoning Machine is located at former dairy in the South of Ireland. The machine is still on location and viewing can be arranged. The site is reachable by Shannon International Airport & Cork International Airport. Contact for more information.

Condition: new, axle configuration: 2 axles, loading space length: 6,500 mm, loading space width: 2,400 mm, loading space height: 1,000 mm, suspension: air, tire size: 385/65-22,5, color: white, = Additional Options and Accessories = - LED lighting - Air suspension = Notes = Internal number for customer inquiries: 6-079 KRONE building materials central axle trailer (tandem) for building material transport * COC (International Certificate of Conformity) * XL certified according to EN12642 * Unladen ride height approx. 1230 mm * Axle loads: 18,000 kg (2 x 9,000 kg) * Coupling height (center) approx. 800 mm unladen * Loading width approx. 2480 mm * Loading length approx. 6500 mm * Central lashing rail * Forklift guard on 3 sides (left + right + rear) * 1 support winch at the front * 1 set of rear supports, foldable * Drawbar eye ø 50 mm (18t gross vehicle weight = 14t payload) ->> Optional ø 40mm drawbar eye = reduction to 14t, then reduced payload of 10t. * Axle spacing approx. 1360 mm * Lifting and lowering device with 1 rotary slide valve * Kinnegriprungen K20, height approx. 1000 mm (lever in upright) * Side board height approx. 1000 mm * Side boards with recessed steps on the inside * Side boards with lifting aid (except at the rear) * Front wall approx. 1200 mm high, with screen-printed panel * Screen-printed floor * Lighting system, all lights LED Financing is possible with our financing partner. For further questions, our sales team will be happy to assist you. This is a non-binding offer. Subject to prior sale, errors and changes. = Further Information = General Information Year of manufacture: 2026 Design year: 2026 Axle Configuration Bjdozrgy Eopfx Akisdi Tire size: 385/65-22.5 Brakes: Disc brakes Suspension: Air suspension Weights Unladen weight: 3,984 kg Payload: 14,016 kg GVW: 18,000 kg Functional Body brand: Krone Load-Carrier flatbed with side boards Condition Overall condition: very good Technical condition: very good Optical condition: very good

Condition: new, functionality: fully functional, Year of construction: 2026, A stone crushing plant for sand and aggregate making is a facility where stones and rocks are crushed into smaller pieces or gravel. It typically includes several stages of crushing and screening to produce various sizes and grades of sand and aggregate materials, which are essential in construction, landscaping, and other applications. Here's an introduction to the components and processes involved in a typical stone crushing plant: ### Components of a Stone Crushing Plant 1. Primary Crusher: - Purpose: The primary crusher, often a jaw crusher or gyratory crusher, initially breaks down large rocks into smaller pieces. - Function: It handles raw materials from the quarry or mine and prepares them for further processing. 2. Secondary Crusher: - Purpose: A secondary crusher, such as a cone crusher or impact crusher, further reduces the size of the crushed stones. Bdedpfx Ajq N U Duekisi - Function: It refines the material after primary crushing, producing smaller and more uniform-sized aggregates. 3. Tertiary Crusher (Optional): - Purpose: In some configurations, a tertiary crusher like a vertical shaft impactor (VSI) may be used for shaping and fine crushing. - Function: It produces finely crushed materials for specific applications, such as concrete production or road base. 4. Screening Equipment: - Purpose: Screening equipment like vibrating screens or trommel screens separates the crushed materials into different sizes. - Function: It classifies the aggregates into various grades according to size, ensuring uniformity and meeting specifications. 5. Conveyor Systems: - Purpose: Conveyor belts transport materials between different stages of crushing and screening. - Function: They ensure efficient material handling and continuous operation within the plant. 6. Washing Equipment (Optional): - Purpose: Washing equipment, such as sand washers or scrubbers, may be used to remove impurities from sand and aggregate products. - Function: It improves the quality of the final products by cleaning them and removing fines or contaminants. ### Processes Involved - Primary Crushing: Large rocks are fed into the primary crusher and reduced to a manageable size. - Secondary Crushing: The crushed materials from the primary crusher are further processed by secondary crushers to achieve the desired aggregate sizes. - Screening: The crushed and sized materials are screened to separate them into different sizes and grades. - Material Handling: Conveyor systems transport materials between different stages of the crushing and screening process. Final Product Handling:Finished products, such as sand and various sizes of aggregates, are stored or loaded for transport to customers or construction sites. Applications - Construction: Used in the production of concrete, asphalt, and road base materials. - Landscaping: Provides decorative and functional aggregates for gardens, pathways, and driveways. infrastructure: Essential for building foundations, drainage systems, and structural fill. As for the capacity we have 30 t/h, 30-50 t/h, 50-100 t/h, 100-150 t/h, 150-200 t/h, 200-300 t/h, 300-500 t/h, and both stationary crushing plant and mobile crushing plant are available for option.

Condition: new, power: 346 kW (470.43 HP), fuel type: diesel, tire size: 385/65-22,5, axle configuration: 6x2, wheelbase: 4,800 mm, fuel: diesel, fuel tank capacity: 590 l, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, loading space length: 66,000 mm, loading space width: 24,800 mm, loading space height: 10,000 mm, Equipment: ABS, AdBlue, Bluetooth, EBS, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, navigation system, onboard computer, parking heater, power mirror, retarder, soot filter, trailer coupling, - Aluminum fuel tank - Rear work light - Heated exterior mirrors - Heated mirrors - Co-driver's seat - Differential lock - High beam headlights - Speed limiter - Catalytic converter - Automatic climate control - Refrigerator - LED lighting - Air suspension - Air-suspended seats - Particle filter - PTO (Power Take-Off) - Radio/Multimedia system - Rear view camera - Disc brakes - Sleeper cab - Sun visor - Lane keeping assist - Stability control - Auxiliary heater - Automatic heating system - Toolbox - Windshield - Additional steering axle Internal number for customer inquiries: 6-026 IMMEDIATELY AVAILABLE -> Model and year of manufacture 2026 MAN TGX 26.480 6x2-4 Air / Air as a dump truck with loading crane PALFINGER PK 22002 EH or FASSI F235, each with 4 or 6 outriggers Vehicle: Diesel engine MAN D26, 480 hp, Euro 6e Automatic transmission MAN TipMatic 12.26 DD with retarder 35 Retarder Eco, speed-dependent, adjustable, energy-efficient High-performance engine brake MAN EVBec, adjustable Disc brakes, protected, for off-road use Drive 6x2-4 Suspension type Air / Air (LL) 4,800 mm main wheelbase, 1,350 mm wheelbase between rear axle and trailing axle 590 l fuel tank capacity, 60 l AdBlue tank capacity Trailing axle steered and liftable Trailer coupling RINGFEDER Type 4040/G150B, ø 40 mm drawbar pin -> Optional ø 50mm also possible Cab GM: the spacious one (wide, long, medium height) Comfort mattress, lower, 110 mm Pull-out refrigerator and drawer Driver's comfort seat, air-suspended, with lumbar support and shoulder adjustment Glass sunroof, electric LED lighting MAN Media System Navigation Professional 12.3 inches MAN Sound System Advanced with subwoofer GSR equipment (rear view camera, turning assistant, tire pressure monitoring, Alco Lock preparation, etc.) Body: Dump bed: Dimensions 6,600 x 2,480 x 1,000 mm Side walls 1x divided (2 flaps) per side, with side wall release Substructure: Steel construction, KTL + powder coating and/or hot-dip galvanized Perforated frame for good load securing Center lashing bar Toolbox Support leg pads including bracket Bdjdpfjz Hkdnjx Akiei Cranes: Fassi F235 loading crane: Load capacity at 12.7 m still 1,345 kg or 17.1 m at 740 kg Slewing range 400° Double knuckle system with PROLINK (over-extension of the knuckle arm up to 15°) Electronic overload cut-off system with FX500 Fassi RCS Funk maxi - 6 functions » with 3 joysticks (2-2-2) Emergency stop, as well as optical alarm (90% and 100%) incl. digital slewing limit adjustable FASSI stability control FSC incl. LMB II Control system for 2 additional functions with »2 hose guides / e-dynamic With 4-section and 6-section extension on stock alternatively: PK 22002-EH – PALFINGER HIGH PERFORMANCE TRUCK-MOUNTED CRANE -Lifting moment: 205.0 kNm (20.9 mt) -Classification HC1 HD4/B3 according to EN12999 -Fast extension system with oil return and internal oil passage -Double knuckle with Power Link Plus 15° -Slewing mechanism with slewing cylinders -Slewing range 400° -Electronic HPLS -...

Condition: used, Year of construction: 2001, TECHNOLOGICAL LINE FOR MANUFACTURING ROOFING ELEMENTS 1. Profiling machine 2. Insulation element production system 3. AL foil preparation system 4. Gluing system 5. Auxiliary components, technical documentation, certificates Types of roofing panels produced on the technological line: - Roofing panels with modular dimensions 1100 mm x 1070 mm Bdsdpfx Akoyv E Aioisi - Roofing panels with half-module dimensions 550 x 1070 mm - Roofing panels without anti-condensation layer in various lengths (up to 6 m)

Condition: like new (used), Year of construction: 2025, functionality: fully functional, type of input current: AC, space requirement width: 762 mm, space requirement length: 1,468 mm, space requirement height: 1,278 mm, overall weight: 300 kg, warranty duration: 6 months, Equipment: CE marking, Two coordinated CNC milling machines / special machines for the fully automated series production of consumables. The product is repeatedly requested in large quantities in international online and retail trade; worldwide, there are only a few manufacturers that produce this product. THE MACHINES – KFM25: produces the blank from the solid material – PFM25: processes the functionally critical high-end profile EQUIPMENT – Process: Infeed via conveyor belt → Machining → Ejection – Industrial control with touch operation, quantity input and counter – System software configured for 6 products, easy changeover – Closed-loop stepper motors, milling spindle 2.2 kW/ER20 – Integrated vacuum, extraction Ø 90 mm – CE marking with declaration of conformity – 1-day on-site training included during handover TECHNICAL DATA – Year of construction 2025, used, very good condition – 230 V / 50 Hz, pneumatics 6–8 bar – Repeatability approx. ± 0.01 mm – Weight approx. 150 kg per machine PERFORMANCE – approx. 40,000 pieces / 1-2 shifts per machine and month – Material consumption approx. €0.10 / piece – Achievable selling prices up to approx. €3.80 / piece Inspection with test run possible in Germany at short notice, handover by arrangement. Bdedpfx Ae Afbvrokiei Sold as seen, excluding any warranty for material defects and only to businesses. All information is based on experience and is without guarantee. Only the written purchase agreement is binding.

Condition: used, Year of construction: 2002, Technical details: thickness: 0,6 mm width: 1200 mm Length: 100 mm work speed: 1,5 - 3 m/min motor power: 45 kw compressed air: 7 bar Total weight, approx.: 4500 kg dimension machine approx.LxWxH: gesamt: 20 m / 2,6 m / 3 m m 2 pcs Sandwich Panel Production Plant The plant is especially suitable for producing light laminated panels. The plant consists of a feeding system (conveyor belt) for the material, cutting system, profile system and an electronically control system. The plant has a length of 20m, width of 2,6m, height of 3m. The total weight of the plant is approximately 4,5 tons. The power consumption including the thermal output is 36 KW. The recommended material of the internal layers are flame retardant Polystyrol or other light heat insulation materials. The sheet will be stable connected under pressure and heat with the Polystyrol through double sided application from portions of glue on the Polystyrol. The panels have good physical characteristics such as thermal insulation, sound insulation, wet consistency, bending strength, compressive strength and mechanical attributes. Any length of the laminated panels is possible and adjustable on customer demand. The color of the panel is variable and is depending from the color of the used sheets. Data Sheet Bdsdou Nxa Hepfx Akiji Power Consumption of the plant (with heating system): 36KW Measurements: - Length = 20m - Width = 2,6m - Height = 3 m - Operating Temperatures: The optimal temperature for producing the panels is approximately 25 °C. - Material: galvanized metal sheet on rolls, sheet thickness 0,3 – 0,6mm and a width of 1200mm - Power Supply: 380 V 50Hz - Maximum engine power: 45 KW - Compressed Air: 7 bar Measurements of the laminated panels: Model 1 - Width 800 – 1200 mm - Thickness 20 - 30mm Model 2 - Width 1150 mm - Thickness 50 – 150mm( adjustable) production plant consists of: - unwinding device - feed system - lamination - cutting device - glueing - fume extractor device - stacking device - electronic control system (Mitsubishi) *

Condition: used, The Rondo pizza system is an industrial production line for processing pizza dough, from dough sheet forming and calibrating to pressing and preparing for topping. The line consists of a 4-row WP head machine, Type TWS (year of construction 2015), and a Rondo dough sheet former, Type Laminazione (year of construction 2001), with a dough sheet width of 600 mm and a capacity of 1,800 kg/h. Further components include a hopper with a star roller divider, flour dusters, belt conveyors, a cross roller, calibrating roller sets, punching and spike rollers, a guillotine, and leftover dough return systems. The system features belt proofing units and feeding systems for the dough pieces and the pizza press. The heated pizza press achieves a capacity of 4,128 pieces per hour and is designed for pizza sizes of 250, 280, and 340 mm. Additional equipment includes a vacuum suction depanning device, a spike press, oven outlet and curve belts, and conveyors for the topping line. A herb spreader and a water-moistening unit complete the system. Pizza System Rondo – Components and Equipment WP head machine, Type TWS, 4 rows, year of construction 2015 Rondo dough sheet former, Type Laminazione, year of construction 2001 Dough sheet width: 600 mm Capacity of dough sheet former: 1,800 kg/h Hopper with star roller divider Flour duster Belt conveyor system Cross roller Calibration rollers 1 and 2 Additional flour duster Retracting belt for leftover dough Ascending conveyor to belt proofer, belt width 1,000 mm Belt proofer, belt width 1,000 mm Internal dimensions of belt proofer (L × W × H): 14,300 × 3,000 × 2,394 mm Conveyor to topping line 1 Additional flour duster Cutting roller Spike roller Guillotine Automatic retracting belt for leftover dough Metal conveyor belt with tank Setting device from 750 mm to 1,600 mm Dough piece feeding system Dough piece proofer Bodpfx Ae Ahn E Uekiodi Feeding system to pizza press Heated pizza press Pizza press capacity: 4,128 pcs/h Pizza sizes: 250, 280 and 340 mm Vacuum suction depanner after pizza press Spike press Oven outlet belt with setting device Curve belts, 750 mm Topping line conveyors (without waterfall spreader) Herb spreader and water-moistening unit

Condition: excellent (used), CATALOGUE NUMBER 7817 TECHNICAL DATA DDCA - Double-sided profiling machine - length of the profile 180 – 850mm - width of the profile 30 – 75mm - thickness of the profile 10 – 45mm - spindle diameter 30mm - max. disc diameter 250mm - 4 discs in a set 5 spindles: left side: - 1) vertical upper 2.2kW - 2) horizontal lower 2.2kW right side: Bdsdpfx As Af I Iqekiji - 1) vertical lower 2.2kW - 2) vertical upper 2.2kW - 3) horizontal lower 2.2kW - spindles adjustable up/down, left/right - 2 material clamping devices - stepless feed rate adjustment 0-10m/min - central lubrication via oil pump - pump motor 2.2kW - diameter of the dust extraction nozzle 5x100mm - dimensions L/W/H 1900x2230x1530mm DDGA - Four-sided planing machine - width of the workpiece 35 – 130mm - thickness of the workpiece 10-60mm - min. length of the workpiece 200mm spindle arrangement: - 1) lower 5.5kW - 2) right 5.5kW - 3) left 5.5kW - 4) upper 5.5kW - spindles adjustable up/down - upper and lower spindle diameter 40mm - right and left spindle diameter 30mm - 4 feed rates 13/20/26/40 - central lubrication of the chain via oil pump - diameter of the dust extraction nozzle 4x120mm - dimensions L/W/H 3200x1370x1830mm DBCA - Profiling machine feeder - max. feed rate 40m/min - max. width of the profile 150mm - motor 0.55kW - overall dimensions L/W/H 2320x600x1150 DBGA - Moulding machine feeder - length of the mouldings 200-600mm - width of the mouldings 30-20mm - thickness of the mouldings 10-40mm - stepless feed rate adjustment 10-40m/min - motor 0.75kW - overall dimensions L/W/H 1500x500x980mm - total weight approximately 4900kg Net price: 63900 PLN Net price: 14860EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to higher fluctuations) * MAR-MASZ guarantees the quality of your purchase, but is not an authorized representative of the manufacturer. All trademarks and names are used for informational purposes only, to identify the product. We only resell goods that the manufacturer has previously introduced to the market. We have no business relationship with the manufacturer.

Condition: new, functionality: fully functional, Year of construction: 2025, Aggregate and ballast crusher equipment are used in the crushing and processing of various materials for construction and infrastructure projects. These crushers are designed to break down large rocks, gravel, or stones into smaller pieces, producing aggregates and ballast that are essential components in the construction industry. Here are some key aspects related to aggregate and ballast crusher equipment: 1. Jaw Crusher: - Jaw crushers are commonly used for primary crushing in aggregate and ballast production. They operate by compressing the material between a stationary and a movable jaw. 2. Impact Crusher: - Impact crushers are suitable for shaping and producing fine aggregates. They use impact force to crush the material, making them suitable for various types of rock and ore. 3. Cone Crusher: - Cone crushers are often used for secondary and tertiary crushing in aggregate production. They are efficient for producing well-shaped and finely graded aggregates. 4. Vertical Shaft Impact (VSI) Crusher: - VSI crushers are designed for shaping and producing high-quality artificial sand. They use the "rock-on-rock" crushing principle, where rocks are fed into the rotor to be accelerated and crushed against the stationary anvils. Bdsdpjq Nxrxjfx Akisi 5. Gyratory Crusher: - Gyratory crushers are primarily used in mining, but they may also be used in the production of aggregates. They have a conical head and a concave surface, which crushes the material between the head and concave. 6. Mobile Crushers: - Mobile crushers, including mobile jaw crushers and mobile impact crushers, provide flexibility and mobility for on-site crushing of aggregates and ballast. They are often used in construction projects where materials need to be processed directly at the job site. 7. Screens and Scalpers: - Screens and scalpers are used to separate different sizes of aggregates after the initial crushing stage. Vibrating screens are commonly employed to classify and separate materials based on size. 8. Conveyors: - Conveyors are crucial for transporting materials between various stages of the crushing process and for stockpiling the final products. They enhance efficiency in material handling. 9. Dust Suppression Systems: - Crushing operations can generate dust, and dust suppression systems are used to minimize environmental and health impacts. These systems may include water sprays or chemical suppressants. 10. Quality Control: - Quality control measures, such as particle size analysis and gradation testing, are essential to ensure that the produced aggregates and ballast meet the required specifications and standards. 11. Environmental Considerations: - Crusher equipment should adhere to environmental regulations, and measures like dust control, noise reduction, and proper waste disposal should be implemented. When selecting aggregate and ballast crusher equipment, factors such as the type of material, required product size, production capacity, and mobility requirements should be taken into consideration. Additionally, adherence to safety and environmental standards is crucial in the operation of crushing equipment.

Condition: used, Haver & Boecker SWA/MECII-20 Loading System Bjdpfx Akog Sfa Tjisdi Haver & Boecker SWA/MECII-20 bulk loading system with weighing scale for loading trucks or wagons with bulk materials. Suitable for free-flowing, non-dusty bulk materials. Description Brand: Haver & Boecker Type: SWA/MECII-20 Year of construction: 2003 Temperature range: -10 °C / 40 °C Voltage: 230V Frequency: 50 Hz Pneumatic pressure: 5 bar; Max 40 kg, Min 10 kg Dimensions: Section I: L2.43 x W187 x H310 Section II: L240 x W240 x H310 Haver net weighing system with frame Weighing and discharge electronics MEC II-20 for controlling weighing and/or machine functions Advantages • High level of user comfort • Simple programmability • PTB and OIML approval • 99 product type memories • User guidance via plain text display in 6 selectable languages Operator terminal BT 15 For automatic remote adjustment of product types, including motorized adjustment of bag length/width parameters. More items - new and used - can be found in our shop! International shipping costs available upon request!

Condition: new, functionality: fully functional, power: 260 kW (353.50 HP), fuel type: electric, color: dark red, overall weight: 42,000 kg, operation weight: 42,000 kg, chain condition: 100 %, axle configuration: 3 axles, Year of construction: 2026, The construction industry is moving away from the "build-demolish-dump" cycle and toward Urban Mining. At the heart of this shift is the Mobile Stone Crusher, a powerhouse designed to turn piles of jagged concrete and brick into high-quality recycled aggregate right on the job site. --- ## 1. The Engineering Logic: From Waste to Wealth In a traditional setup, demolition waste is hauled to a landfill—a process that is expensive, carbon-heavy, and wasteful. A mobile crusher flips the script. It brings the factory to the waste. By processing materials on-site, contractors save on transport costs and produce "Road Base" or "Sub-base" materials immediately. ### Key Components of a Mobile C&D Plant: * Vibrating Feeder: Uses a "Grizzly" bar system to pre-screen fines (dirt/sand) so the crusher only works on the big stuff. * Crushing Unit: Usually a Jaw Crusher (for primary compression) or an Impact Crusher (for better grain shape and higher reduction ratios). * Magnetic Separator: This is the "secret sauce" for C&D waste. It pulls out rebar and scrap metal that would otherwise contaminate the recycled aggregate. Bodpeq I Nviofx Akiedi * Discharge Conveyor: Transports the finished product to a stockpile. --- ## 2. Technical Specifications & Performance When evaluating these machines, "Throughput" ($TPH$ or Tons Per Hour) is the metric that matters. For C&D recycling, the machine must handle unpredictable feed sizes and varied material hardness. ### Typical Technical Specifications Table | Feature | Specification Range | Why it matters | | --- | --- | --- | | Throughput | 100 – 500 $t/h$ | Determines project timeline efficiency. | | Max Feed Size | 500mm – 1,100mm | Dictates if you need a hydraulic breaker first. | | Power Source | Diesel-Electric or Hydraulic | Dual power (Electric) is better for urban noise/emissions. | | Crusher Type | Jaw or Impact | Impactors provide a more "cubic" final product. | | Mobility | Crawler Tracks | Essential for moving over uneven rubble piles. | --- ## 3. The "C&D" Specialization Recycling construction waste isn't just about "breaking rocks." It’s about cleaning material. Modern mobile units are equipped with: 1. Over-belt Magnets: Specifically designed to lift heavy steel reinforcement bars (rebar) out of the crushed concrete flow. 2. Dust Suppression: High-pressure misting systems to keep neighbors happy and workers healthy in tight urban environments. 3. Active Pre-screening: Removing sticky soil or asphalt fines before they enter the crushing chamber to prevent "plugging." > The Insight: Using a mobile crusher can reduce project carbon footprints by up to 40% simply by eliminating the "truck-in, truck-out" logistics of aggregate management. --- ## 4. Maintenance and Longevity Because C&D waste is highly abrasive (and often contains "surprises" like wood or plastic), maintenance is non-negotiable. * Jaw Plates: Must be flipped or replaced regularly to maintain the "Closed Side Setting" (CSS), which determines the size of your output. * Blow Bars: In impact crushers, these are the high-wear items that take the brunt of the force. --- Would you like me to compare the cost-effectiveness of Jaw vs. Impact crushers for a specific type of demolition project, or perhaps look into the environmental regulations regarding on-site crushing?

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 3823954597, Year of construction: 2019, We are offering 3 sets of ready-to-use SolarMark EFLS industrial lasers, manufactured in 2019. Bdedpfxoz D T Iqo Akiji Manufacturer: e-SolarMark Type: EFLS Serial number: 3823954597 Date of manufacture: 05-2019 Price per set. The e-SolarMark eFLS fiber laser is a versatile industrial laser designed for marking a wide range of metals and plastics, including HDPE, OPP, ABS, stainless steel, and titanium. It can be used for both static and dynamic marking. Its compact integration dimensions make it suitable for installation on production lines. This laser coder is made with a fully stainless steel industrial design, making it suitable for use in various industries, including electrical, food, bottling lines, automotive, chemical, cosmetic, dairy, healthcare, and construction. Suitable for Datamatrix code marking. High marking speed. If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: refurbished (used), Year of construction: 2012, operating hours: 1,000 h, functionality: fully functional, overall weight: 100,000 kg, Pellet production line of Italian manufacture. Renown brands of machinery like General Dies SRL, Miller SRL, FIDA SRL and other brands. Capacity of the line 1.3 tons per hour Pellet press General Dies TAU4 – 110kw Container with movable floor and hydraulic power aggregate Triple-Pass rotary drum dryer 2.5 tons catalog capacity (effective capacity up to 1.5 tons/hour) Transport divider for biomass separation Pezzolato PTH 660/700 (Wood chipper, possibly excepted from the line if buyer wishes so) Bodji Akrkspfx Akisdi Furnace for rotary drum dryer and complementary equipment Hammer mill “Miller SRL” 75 kw Transport conveyors for biomass transport Cyclon for dust removal Cooler silo for dust removal Weighing and packing equipment Electric cabinets for the entire line with cables Ventilation tubes for sawdust and wood chips transport Screw air compressor 860l Pump for grease dozing in central press lubrication system Included are additional pieces of equipment like filter silo bags, metal connections etc. (complete line is between 4 and 5 full trucks of equipment)

Condition: repair required (used), For sale at a favorable price: Please send us your price offers. Mattress production line for overhaul or dismantling. Manufacturer: KSM, approximately 25-30 years old. The system is aging and requires a thorough overhaul; otherwise, it is functional. It has only been used infrequently by us. However, it is also interesting as a source of spare parts for dismantling. Control system with Lenze frequency inverters, Siemens PLC, conveyor belts, many motors, sensors, metal, aluminum profiles, needle grippers, etc. Consisting of: Bdjdpfs Aba Ncjx Akioi Gantry: Plate feeder with needle gripper (for automatically placing individual foam plates onto an alignment station with a conveyor belt). Roller adhesive application system (here, the foam plates are passed through on the conveyor belt and adhesive is applied by rollers). Padding carrier feeder with needle gripper (for automatically placing padding carriers (felt) onto the foam plates that have been wetted with adhesive). Adhesive tunnel with adjustable nozzles (here, the pre-assembled plates are sprayed with adhesive on the conveyor belt to allow the frame to be glued). After that, the material can be removed from the conveyor belt to assemble the mattresses. Several hundred mattresses per shift are possible. The system will only be sold as a whole. Dismantling and transport must be handled by the buyer. (EXW)

Condition: new, functionality: fully functional, power: 210 kW (285.52 HP), fuel type: electric, color: silver, overall weight: 27,000 kg, empty load weight: 27,000 kg, operation weight: 36,000 kg, maximum load weight: 50,000 kg, tire size: 6*2, tire condition: 100 %, axle configuration: 3 axles, Year of construction: 2026, machine/vehicle number: MYM-J57C90, Equipment: hydraulics, low noise, rubber tracks, Mobile Crusher: Smart C&D Waste Recycling Solution Turn Demolition Debris into Profit Construction and demolition waste accounts for 30-40% of global waste. Our mobile crushing solution processes C&D waste on-site, transforming costly debris into valuable recycled aggregates. Technical Specifications 900×1060 Mobile Jaw Crusher Crusher Unit: Jaw opening: 900mm × 1060mm Max feed size: 750mm Output size: 75-200mm (adjustable) Capacity: 80-180 TPH Power: 90-110 kW Vibrating Screen: 2-deck or 3-deck configuration Screen area: 3.6-4.8 m² Motor power: 15 kW Produces 3-4 aggregate sizes simultaneously Feeder: Belt width: 1000mm Variable speed: 0-25 m/min Power: 7.5 kW Hopper capacity: 5-8 m³ Overall: Bdsdpfx Aoq Nf Tvekiji Dimensions: 12-14m (L) × 2.8-3.2m (W) × 3.8-4.2m (H) Weight: 38-45 tons Total power: 120-150 kW Fuel consumption: 25-35 L/hour (diesel option) What We Process ✓ Concrete (plain & reinforced) ✓ Asphalt pavement ✓ Bricks and masonry ✓ Tiles and ceramics ✓ Mixed demolition debris ✓ Road construction waste Complete Recycling Process 1. Feeding Large hopper (5-8 m³) receives mixed C&D waste up to 750mm 2. Primary Crushing 900×1060 jaw crusher reduces material to 75-200mm with 4-6:1 reduction ratio 3. Magnetic Separation Automatic removal of steel rebar (>95% recovery rate) 4. Screening Multi-deck screen produces multiple grades: 0-5mm (sand) 5-10mm 10-20mm 20-40mm 5. Dust Control Integrated water spray system (8-12 nozzles) achieves >90% dust suppression Key Features Mobility: Track-mounted: Self-propelled, 0.8-1.2 km/h Wheel-mounted: Highway transportable Setup time: 30-60 minutes 360° working radius Automation: PLC control system Remote operation (50m range) Real-time monitoring Automatic overload protection Performance: Concrete: 120-150 TPH Asphalt: 100-130 TPH Mixed waste: 80-120 TPH Screening efficiency: >95% Output Products Recycled Aggregates: 0-5mm: Concrete, mortar (15-20% output) 5-10mm: Asphalt mix, drainage (20-25%) 10-20mm: Concrete, road base (25-30%) 20-40mm: Sub-base, backfill (25-30%) Applications Building demolition Highway reconstruction Bridge dismantling Airport runway recycling Disaster debris management Urban renewal projects Service Package Included: Factory testing Installation supervision Operator training (3-5 days) 12-month warranty Lifetime technical support Spare parts availability Get Started Transform C&D waste from cost to profit. Our 900×1060 mobile crusher delivers proven performance, exceptional ROI, and environmental sustainability. Contact us for: Detailed specifications Custom configurations Site assessment Equipment demonstration Competitive quotation Make waste work for you. Choose proven mobile crushing technology for sustainable C&D recycling.

Condition: excellent (used), CATALOGUE NUMBER 7816 TECHNICAL DATA DDCA - length of the sanding belt: 180 – 845mm - width of the sanding belt: 30 – 75mm - thickness of the sanding belt: 10 – 45mm - spindle diameter: 30mm - max. disc diameter: 250mm - 5 spindles: Bdedpjzx Rkzsfx Akioi - left side: 1) vertical upper 2.2kW 2) horizontal lower 2.2kW right side: 1) vertical lower 2.2kW 2) vertical upper 2.2kW 3) horizontal lower 2.2kW - spindles adjustable up/down, left/right - material clamping device: 2 pcs - stepless feed speed adjustment: 0-10m/min - spindle diameter: 5x100mm - dimensions (L/W/H): 1870/2230/1320mm DDGA - width of the workpiece: 35 – 130mm - thickness of the workpiece: 10 – 40mm - minimum length of the workpiece: 200mm - spindle arrangement: 1) lower 5.5kW 2) right 5.5kW 3) left 5.5kW 4) upper 5.5kW - spindles adjustable up/down - 6-knife cutter heads mounted on the upper and lower spindles - spindle diameter: 40mm - milling cutters mounted on the right and left spindles, max. diameter: 50mm - spindle diameter: 30mm - 2 feed speeds: 4.9kW - central chain lubrication via an oil pump - spindle diameter: 4x125mm - dimensions (L/W/H): 3100/1300/1700mm ADVANTAGES - Polish production - 5 spindles - unpainted - very good condition - used production line Net price: 52900 PLN Net price: 12302 EUR Net price calculated based on the exchange rate of 4.30 PLN/EUR (price may be subject to change in the event of significant exchange rate fluctuations)