Condition: used, 1 x Firex 150L Boiling Pan. Located Wiltshire. Deb Hk Nijwg Dvpsujcg

Condition: used, Year of construction: 2024, Functionality: fully functional, type of input current: AC, type of cooling: air, input voltage: 230 V, temperature: 3 °C, frequency: 50 Hz, very good condition cooling tanks ,with compressor ,fixed with agitator , ready to use,could be new gas only, taken from working Ice cream factory,working perfectly ,we have only 8 left,capacity of 700 L approximately. very good looking ,very good conditions,working perfectly ..any question Please do not hesitate to ask, Dcobsu Dkr De Hk Niueg

Condition: used, Year of construction: 2015, MACHINE SPECIFICATION Maximum swing 530mm Swing over cross slide 530mm Maximum machining diameter (upper turret) 500mm Bar work capability main spindle 51mm Bar work capability secondary spindle 51mm Maximum machining length 854mm Maximum support weight main spindle chuck work 150Kg Debewh Tzwe Hk Niuscg Maximum support weight main spindle shaft work 150Kg Main Spindle Rotating speed maximum 6000 min-1 Rotating speed minimum 35 min-1 Acceleration and deceleration time 4.0 s Through hole diameter 61mm Motor output (continuous rating) 7.5kW   MACHINE SPECIFICATION Cont’d Secondary Spindle Rotating speed maximum 6000 min-1 Rotating speed minimum 35 min-1 Milling head Type Single Spindle with ATC unit Tool shank type CAPTO C6 Tool size (OD turning) 20mm Tool size (ID turning) 32mm Tool size (milling tool max. diameter) 130mm Tool size (milling tool max. diameter) 250mm 90° indexing time 0.5 s Feed Axes Rapid feed rate X 40000mm/min Rapid feed rate Z 40000mm/min Rapid feed rate Y 40000mm/min Rapid feed rate W 30000mm/min Movement stroke X 450mm Movement stroke Z 904mm Movement stroke Y 210mm Movement stroke W 903mm Others Coolant tank capacity 210L Power requirements (continuous) 36.71 kVA Air pressure 0.5 Total air capacity 230 I/min Machine dimensions Height of centers 1250mm Length (excluding feed and swarf management system) 2495mm Width (excluding Rotac Rack unloading system) 3030mm Height 2500mm Weight 10,400Kg Auto tool changer & magazine Type of tool magazine 36 MACHINE SPECIFICATION Cont’d Maximum tool diameter (with adjacent tool) 90mm Maximum tool diameter (no adjacent too) 130mm Maximum tool weight 5Kg Maximum tool length 250mm GENERAL MACHINE OPTIONS

Condition: excellent (used), Year of construction: 2020, Functionality: fully functional, overall weight: 54 kg, load capacity: 5 kg, teach pendant manufacturer: ABB, input voltage: 230 V, ABB IRB 1200 in excellent condition. Manufactured in 2020 and had little use. 2 available Dcjb Hk Niewg Abksuog

Condition: good (used), Brand: TOPPER Type: TNL 100 ALSB Year of build: 2002 Serial number: 11326 Turning Ø: 420 mm Turning length: 400 mm Spindle boring Ø: 51 mm Speed till n=: 4500 rpm Coolant pump: true Chip conveyor: true CNC control, brand, type: Fanuc series 18i-T Engine power (kW): 15 kW Electric connection: 380 V Machine weight: 6500 kg Dimension l: 4200 mm Dimension w: 1800 mm Dimension h: 2100 mm Dcob Hk Niowfyn Sjusg

Condition: ready for operation (used), machine/vehicle number: 033.3451.000, Condition Used Stock Number 8B This listing is for the Watson Marlow 313DW The unit is in full working condition and is ready for immediate release Key Features The Watson-Marlow 313DW is a single-channel, rapid-load peristaltic pump head designed for laboratory and industrial fluid handling applications. It is part of the 300 Series, known for their flip-top design that facilitates quick and easy tubing changes. Key Features High Flow Rate: The 313DW model is equipped with a three-roller mechanism, enabling a maximum flow rate of up to 2,000 mL/min when using 1.6 mm wall thickness tubing. Djb Hewht Dfok Niuecg Tubing Compatibility: Accepts standard 1.6 mm wall thickness tubing with bore sizes ranging from 0.5 mm to 8 mm, offering flexibility for various applications. Durable Construction: The pump head is built with a glass-filled polypropylene back; IXEF front; glass-filled nylon rotor, clamps, and mounting plate; and MoS₂-filled nylon rollers. These materials ensure strength, chemical resistance, and long service life. Roller Options: Choose the three-roller model for high-flow applications or the four-roller model for smoother flow and reduced pulsation. Extension Capability: Add up to five extension pump heads, depending on the type and size of tubing used. Note: The number of extension pump heads allowed depends on the type and size of tubing being used. Warranty: Includes a 1-year manufacturer warranty for quality assurance. Applications Chemical Processing: Ideal for accurate, contamination-free chemical transfer. Biotechnology: Suitable for sterile fluid handling. Food and Beverage: For transferring additives, colorants, and ingredients. Water Treatment: Used in dosing and chemical feed systems

Condition: used, WMW SU 315 x 1500 UNIVERSAL CYLINDRICAL GRINDING MACHINE MAKE WMW, MADE IN GERMANY MODEL SU 315 x 1500 YEAR CAPACITY 315.0 mm x 1500.0 mm TABLE TRAVERSE 1680.0 mm TABLE SWIVELS 6 DEGRESS EACH WAY WORK HEAD SPEEDS 4 – 500 RPM WORK HEAD SWIVELS 105 DEGREE WHEEL HEAD SWIVEL 45 DEGREES WHEEL HEAD SPEEDS 1385 / 1900 RPM, WITH MAGNETIC SEPARATOR MACHINE DIMS 6150 x 2000 x 1500 mm MACHINE WEIGHT 5,800 KGS PLUS DROP DOWN INTERNAL GRINDING ATTACHMENT COOLANT SYSTEM 3 POINT STEADIES 2 POINT STEADIES Dsb Hkowc Suxo Niuscg SPARE MAGNETIC CHUCK SPARE FACE PLATE SPARE GRINDING STONES ACCESSORIES WHEEL BALANCING STAND FUME EXTRACTION

Condition: used, Year of construction: 2016, 2016 Gannomat Index 1300 CNC Drilling and Dowel insertion machine. 4 x working zones. Single drill spindle. Single dowel insertion head. Available for any demonstration. Gluing unit is fitted to the machine, but this is not working. With the exception of gluing, the machine works well. Dcjb Hk Njvyhaaeiuog

Condition: good (used), Continuous hot air oven, protein cooker. Has been cooking poultry portions and burgers etc. Nice condition and in production until April 2024. Deb Horz N Tgsk Niuecg

Condition: excellent (used), Year of construction: 2015, Functionality: fully functional, 1 x Newtech RoboSONIC-Inline XL automatic ultrasonic cutter supplied with ABAC Genesis air compressor. The RoboSONIC-Inline XL is a highly flexible, in-line robotic machine incorporating ultrasonic cutting technology. Previously used to cut trays of marshmallow, this machine is designed to be used to cut the entire length of tray bake, round and loaf type products, ideal for customers with high throughput requirements. As a conveyor-based machine, it can be integrated into an existing line or used as a stand-alone solution. Fitted with ABB 6-axis robot and 400mm wide blade providing flexiblity, reliability and accuracy. Also has an integrated cleaning tank with air-dry function. Operated via full colour touch screen with user friendly interface and easy-to-edit programs. Model - R/UCM-COMP-I. Electric supply - 230 V / 50 hz / 1 phase. Power - 13 Amps. Air supply - 6 Bar. Requires mains water supply for the cleaning tank. Overall dimensions - 3630mm long x 1360mm wide x 2170mm high. Belt dimensions - 3630mm long x 615mm wide. This unit has been lightly used, generally being operated for only 2 hours per month since purchase and has been serviced / maintained by the manufacturer, the last service being in July 2024. Air compressor on wheels: Manufacturer - ABAC Aria Compressa S.p.a. Model - GE 7.5. Working pressure - 8 Bar. Voltage and frequency - 400 V / 50 hz / 3 phase. Installed power - 5.5 kW. Dob Hk Niju I U Htouocg VIDEOS AVAILABLE ON REQUEST

Condition: good (used), Year of construction: 2004, Functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 625 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, controller manufacturer: Okuma, controller model: OSP-E100M, workpiece length (max.): 600 mm, workpiece width (max.): 710 mm, workpiece weight (max.): 400 kg, total height: 2,760 mm, total length: 4,535 mm, total width: 2,415 mm, table width: 400 mm, table length: 400 mm, table load: 400 kg, overall weight: 11,500 kg, spindle speed (max.): 10,000 rpm, distance table center to spindle nose: 710 mm, spindle motor power: 15,000 W, spindle nose: BT40, number of spindles: 1, number of slots in tool magazine: 40, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, rotational speed infinitely variable, Okuma Space Center MA400HA Horizontal Machining Centre Machine Type: CNC Horizontal Machining Centre Year: 2004 Control: OSP-E100M Axes: 4 No. of Pallets: 2 Condition: Good Includes Cromar Swarf Conveyor Coolant Filtration System Technical Specifications Pallets: 2 Size of Pallets: 400 x 400mm Dcsb Hkswcd Eve Niujg X Axis Travel: 560mm Y Axis Travel: 610mm Z Axis Travel: 625mm B Axis Travel: 360 Deg Rapid Traverse: 60m/min Spindle Centre to Pallet Top: 50 - 660mm Spindle Nose to Pallet Centre: 85 - 710mm Max Pallet Load: 400kg Max Workpiece Dimensions: 600 x 710mm Tool Pockets: 40 Spindle Taper: BT40 Spindle Power: 15kW Spindle Speed: 10,000rpm Machine Dimensions: 4535 x 2415 x 2760mm Machine Weight: 11,500kg

Condition: ready for operation (used), machine/vehicle number: 16-09514, Condition Used Stock Number 26685.13.07 This listing is for the Binder KT53 Incubator The unit is in full working condition and is ready for immediate release Dceb Hk Nijwht Dleueg The Binder KT 53 is a compact, energy-efficient cooling incubator engineered for precise temperature control in laboratory environments. It leverages Peltier thermoelectric technology for eco-friendly, low-vibration cooling—ideal for sensitive biological or chemical samples. Key Specifications Temperature Range: 4 °C to 100 °C Capacity: 53 litres Cooling Technology: Electric cooling via Peltier module Heating Technology: e™ preheating chamber Temperature Fluctuation: ±0.1 °C at 37 °C Air Circulation: Adjustable fan speed Controller: Supports time-segment and real-time programming Display: LCD monitor Data Interface: USB and Ethernet ports for data logging and remote access Safety Features: Class 3.1 independent temperature safety device (DIN 12880) with visual and audible alarms Construction: Stainless steel interior with a tempered safety glass outer door Shelving: Comes with 2 stainless steel racks; supports up to 5 Internal Dimensions (H x W x D): 400 x 400 x 334 mm External Dimensions (H x W x D): 630 x 660 x 630 mm Weight: 65 kg Power Consumption: Approx. 75 Wh/h at 37 °C Advantages of Peltier Technology Silent, vibration-free operation Environmentally sustainable (no refrigerants) Compact and energy-efficient Ideal for sensitive sample environments

Condition: used, Make : Inoxpa Usage : Powder Blending - Homogeniser Capacity : 5000 L/h Y.o.m 2016 Powder Inlet Funnel Product Inlet Pump Dcsb Hk Nsvgc A Neiusg Product Outlet pump for circulation Sample Valve Stainless steel skid mounted Condition : Excellent

Condition: used, Year of construction: 2016, Functionality: fully functional, 2016 Gannomat Concept 70 Eco Carcase Press. Machine in good working order and any demonstration can be arranged. Leg Extensions to raise the working height. Air-Jet table to ease movement of cabinets inside the press. Infeed / Loading table with rollers. Outfeed table with rollers. Fully adjustable pressure on both vertical and horizontal. Automatic timer for the pressure. 3 x speed adjustment on axis movement. Djb Hk Nijvygz Nouocg The configuration of this machine allows the throughfeed process to be introduced increasing efficiency within your factory.

Condition: excellent (used), Year of construction: 2017, Functionality: fully functional, machine/vehicle number: 285827, MACHINE SPECIFICATION Maximum swing 530mm Swing over cross slide 530mm Maximum machining diameter (upper turret) 500mm Bar work capability main spindle 51mm Bar work capability secondary spindle 51mm Maximum machining length 854mm Maximum support weight main spindle chuck work 150Kg Maximum support weight main spindle shaft work 150Kg Main Spindle Rotating speed maximum 6000 min-1 Rotating speed minimum 35 min-1 Acceleration and deceleration time 4.0 s Through hole diameter 61mm Motor output (continuous rating) 7.5kW   MACHINE SPECIFICATION Cont’d Secondary Spindle Rotating speed maximum 6000 min-1 Rotating speed minimum 35 min-1 Milling head Type Single Spindle with ATC unit Tool shank type CAPTO C6 Tool size (OD turning) 20mm Tool size (ID turning) 32mm Tool size (milling tool max. diameter) 130mm Tool size (milling tool max. diameter) 250mm 90° indexing time 0.5 s Feed Axes Rapid feed rate X 40000mm/min Rapid feed rate Z 40000mm/min Rapid feed rate Y 40000mm/min Rapid feed rate W 30000mm/min Movement stroke X 450mm Movement stroke Z 904mm Dob Hkowhx I Ao Niujcg Movement stroke Y 210mm Movement stroke W 903mm Others Coolant tank capacity 210L Power requirements (continuous) 36.71 kVA Air pressure 0.5 Total air capacity 230 I/min Machine dimensions Height of centers 1250mm Length (excluding feed and swarf management system) 2495mm Width (excluding Rotac Rack unloading system) 3030mm Height 2500mm Weight 10,400Kg Auto tool changer & magazine Type of tool magazine 36 MACHINE SPECIFICATION Cont’d Maximum tool diameter (with adjacent tool) 90mm Maximum tool diameter (no adjacent too) 130mm Maximum tool weight 5Kg Maximum tool length 250mm GENERAL MACHINE OPTIONS AS092 Automatic power on/off and warm up AS250 ATC auto recovery CO032 Chuck airblast (2nd spindle) BY NC command EL110 Power transformer for European market MM007 Number display magazine panel (n/a with tool ID) MO555 Coolers for ball screw (XZ axis) MO575 Roller guide NO823 USB interface (1 port) SD116 Intelligent performance spindle A SD120 One set of adjusting tools SD130 Foundation kit (plates) SI039 C axis 0.0001° increments

Condition: excellent (used), Year of construction: 2021, Functionality: fully functional, machine/vehicle number: Serial No. 07-10-21, TecnoMac Edge Polisher 2021 Model - In Perfect Condition. Ready for new owner. Dcob Hk Novvll Eeiuog Used for Marble, Granite, Stone, Glass etc Please find photos.

Condition: used, Year of construction: 1999, MORI SEIKI SL-200 SMC, 4- AXIS TURN MILL CENTRE MAKE MORI SEIKI, MADE IN JAPAN MODEL SL-200 SMC YEAR 1999 CONTROL FANUC MSD- 518 (18-T) MAX. TURNING DIA. 390.0 mm MAX. TURNING LENGT 507.0 mm SWING OVER BED 680.0 mm OVER CROSS SLIDE 510.0 mm BAR WORK CAPACITY 65.0mm MAX. SPINDLE SPEED 0-4000rpm TURRET 12 stations, ALL DRIVEN stations TAILSTOCK YES, SUB-SPINDLE SPINDLE BORE 73.0 mm POWER TOOL SPEED (C-AXIS) 67- 3000rpm SPINDLE NOSE A8 (TBC) RAPID TRAVERSE RATE X: 18,000mm/min & / Z: 24,000mm/min ELECTRICAL POWER SUPPLY 37.9kVA MACHINE FLOOR SPACE 2650.0 X 1900.0 mm MASS OF MACHINE 4500 KGS PLUS 4- AXIS MACHINE SUB SPINDLE MAGAZINE BARFEED Dcob Hkjwcx R To Niujg RENISHAW TOOL SETTING PROBE SWARF CONVEYOR GOOD RANGE OF TOOLING COMPLETE DUST EXCTRACTION SYSTEM MACHINE MANUALS SWARF BIN

Condition: ready for operation (used), machine/vehicle number: RMM2001, Condition Used Stock Number 54852 / 51787 The listing is for the Malvern Archimedes Particle Metrology +PC + software The unit is in full working condition and is ready for immediate release. The Archimedes Particle Metrology System uses the advanced technique of resonant mass measurement to detect and accurately count particles in the size range of 50nm to 5µm. It reliably measures particle characteristics such as buoyant mass, dry mass, and size, providing high-precision results. This system is particularly useful for the characterization of protein aggregates in formulation or buffer, making it an essential tool in protein research and development. Archimedes can distinguish between proteinaceous material and contaminants like silicone oil by comparing their relative resonant frequencies and buoyant masses, enabling users to obtain accurate, contamination-free results. Included in the Package: ✔ Malvern Archimedes Particle Metrology System ✔ Windows 10 Pro PC with preloaded Archimedes Version 1.21 Software ✔ 24-inch Monitor for clear data visualization Dsb Hkov R Rk Nj Niuocg ✔ Power Adapters Communication Cables for easy setup

Condition: used, Tetra Pak UHT PASTEURISER CAPACITY : 14,000 L/H Debjvhcu Ie Hk Niuecg HOMOGENISER TETRA PAK MODES : FLEX CONDITION LIKE NEW

Condition: used, all stainless steel electrically heated 386 kW with lower and upper belt frying length 8.000 mm belt width 630 mm adjustable speed oil circulation pump Dcob Hkowh Rhue Niueg suitable for fire protection sediment removal system electrical hoists overall dimensions (l x w x h) : ± 11.550 x 1.700 x 2.900 mm

Condition: excellent (used), 1 x Sammic Vacuum packer, Model SV-6100 Y.O.M 2016. Dcsb Hk Niowglb Tousg

Condition: refurbished (used), Year of construction: 2008, This machine has been rebuilt and refurbished with a completely new enclosure and refurbished doors. 460mm Belt width 67mm Product gap 15 tiers 1840 Drum height Brand new Evaporator Dobouph Ekj Hk Niuocg 60KW DX Runs on Freon Any Questions please feel free to ask.

Condition: new, NEW ! Dcobowh Rf Hs Hk Niusg all stainless steel loading : max. ± 500 kg (depending on the product) PLC control with 50 programs adjustable speed from 0 up to 9 rpm with vacuum pump Büsch with water filter dimensions (l x w x h) : ± 2.550 x 1.300 x 1.650 mm

Condition: excellent (used), Year of construction: 2018, 1 x Karpovicz 600L Boiler (KK/600A) (Late 2018). Located Wiltshire. Dcebewglbto Hk Niueg

Condition: used, all stainless steel for product up to 530 x 530 mm Dob Hk Nijwh Rfteujcg Dimension: (L x W x H): 950 x 1.450 x 1.900 mm 3 x 380V, 50Hz, 22kW