Used Testing for sale (10,117)

Condition: excellent (used), Haida Type: HD-B604-S Sensor: TECSIS load cell Max. Capacity: 2T / 20 kN Unit: G, kg, N, LB (adjustable) Resolution: 1/250,000 Accuracy: ± 0.5% Max. Stroke: 700 mm (without fixture) Test speed: 0.1-500mm/min (adjustable) Pjdpfx Agsr Ixq Rj Derd Voltage: 220V AC ± 10%, 50/60Hz Clamping jaws: 0-7 mm Weight: approx. 175 kg Dimensions (WxDxH): 88 x 50.5 x 150 cm Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), functionality: fully functional, Universal testing machine for material testing / material inspection Testing of tensile strength, bond tensile strength, and shear strength of masonry & wood joints, and similar applications. - Nail pull-out test - Compression test on cement and mortar prisms - Flexural test on cement and mortar samples - Compaction test - Flexural test on wood, concrete - Shear strength test on wood - Splitting tensile strength test on wood - Scaffold connection test - Shear strength test on masonry - Tensile test on masonry - Tensile test on reinforcing steel - Tensile test on wood - Pull-out test on reinforcing steel - Reverse bending test on reinforcing steel - Dowel pull-out test - Adhesion tensile test I have made a video demonstrating the machine's operation. I can send this video to a mobile number via WhatsApp or Signal! Pjdpfx Asxmv H Rjg Djrd

Year of construction: 2013, condition: good (used), Universal testing machine Zwick/roll Type: 1488 Podpfjxw N Uvex Ag Djrd Modernized in 2013 with software Test force max.: 200 kN Required space: width: 2,000 mm, height: 2,100 mm, depth: 800 mm, weight approx. 1,000 kg.

Condition: used, Static Universal Testing Machine AllroundLine with two test chambers Tensile Testing Machine, Compression Testing Machine ZWICK / ROELL Type AllroundLine Z010 / TH2S Year of manufacture: 1996 Model: BZ010TH2S . 132583/96 . 406678 Design: Benchtop testing machine Test force: 10 kN (1000 kg) Test chamber height: 1458 mm Test chamber width: 440 mm Crosshead speed: mm/min Drive travel resolution: 0.0625 µm Repeatability accuracy: ±2 µm Motor power: 500 W Power supply: 230 Volt, 50 Hz Rated current: 3 A Power consumption: 800 VA Interface: RS485 - For tensile, compression, and bending tests on material specimens, components, and assemblies - Equipped with TH2S control unit (machine controller) - Data output via RS485 - 1 piece load cell for measuring compression and tensile forces, AST Type KAF-W (Angewandte System Technik GmbH, year 2013) The machine is sold without PC and without software, only the described load cell is installed. Space requirement (W x D x H): 1000 x 650 x 1920 mm Weight: approx. 220 kg Good condition Pjdoxanrxepfx Ag Derd

Condition: ready for operation (used), Year of construction: 1986, Offered is a tensile testing machine year 1986 including hydraulic clamping jaws, load cell: PM 630 Rn, measuring-control unit: Doli EDC 580, nominal load: 600kN, clamping head distance: 150mm-650mm, piston stroke: 500mm, spare clamping head, machine dimensions X/Y/Z: 850mm/600mm/3200mm, machine weight: approx. 3500kg, calibrated annually. Inspection is possible by arrangement. Psdpfx Agoxz Ewzs Derd

Condition: used, Year of construction: 1999, Technical details: max. wheel diameter: 5 - 260 mm gear width: 400 mm max. module: 15 min. module: 0,5 gear hobbing diameter - internal: 30 mm max. helix angle: > 85 ° Aussenverz. max. helix angle: > 45° Innenverz. Pedoqvcnnopfx Ag Djrd Testing Range vertical: 400 mm dist. between centers: 5 - 600 mm table diameter: 260 mm max. table load: 100 kg speeds: 30 1/min total power requirement: 1,6 kVA weight of the machine ca.: 900 kg dimensions of the machine ca.: 200 x 1300 x 2150 mm CNC Gear Tester in good condition, out of OEM Test Lab. For measuring of spur and helical toothing, additional of rotationally symetric parts as true running, coaxiality, axial runout, etc. with tool changer ( 4 nos.) *

Condition: used, Zwick Type: Z30 Technical Specifications: Total Height 2114 mm Width 748 mm Depth 580 mm Fmax: 20 kN Vmax: 125 mm/s Accessories: Clip-On Extensometer 13.5 mm Clip-On Extensometer 40 mm Computer + Software testXpert II V3.5 Condition: Used Total Weight Approx. 500 g Prsdpfxov Rn Ifs Ag Djd Scope of Delivery: (See Image) (Subject to change and errors in the technical specifications, information is subject to change!) We are happy to answer any further questions over the phone. Written orders can be placed by email or fax.

Condition: used, Concrete sample press for concrete and material testing Podpfxsxb Nv Uj Ag Dsrd Flexural strength test Determination of compressive strength

Condition: used, Year of construction: 2001, max. wheel diameter 400/500 mm Prsdevxwxcepfx Ag Dsd CNC-Control GE FANUC Series 160i-M pinion diameter - max. 400 mm crown gear diamter max. 500 mm x-axis +/- 70 mm y-axis 200 mm z-axis 200 mm axis angle 90 Grad speeds: R T min rated current 30 kVA weight of the machine ca. 6,2 t dimensions of the machine ca. 3,2 x 2,5 x 2,3 m

Condition: excellent (used), Year of construction: 2007, max. wheel diameter 400 mm Prodpfx Agjxvdrye Djd weight of the machine ca. 4 t

Year of construction: 1963, condition: not inspected (used), functionality: unexamined, machine/vehicle number: 1762, Universal Testing Machine UHP 60 – Losenhausenwerk Düsseldorf-Grafenberg For sale is a Universal Testing Machine, type UHP 60, manufactured by Losenhausenwerk A.G., Düsseldorf-Grafenberg. This machine was originally produced in the 1960s and is a classic testing device for tensile, compression, bending, and shear tests on metallic and non-metallic materials. Psdpfxjxvp H Aj Ag Dsrd Technical Data (according to original documentation): - Max. static test force: 60 t - Max. dynamic test force: 40 t - Test pressure: approx. 235 bar - Stroke height (piston extended): approx. 3865 mm - Total weight: approx. 2500 kg - Foundation pressure: approx. 5400 kg/m² - Grip separation: 0–1000 mm - Working cylinder diameter: 180 mm - Max. piston stroke: 235 mm - Lower grip adjustment speed: up to 750 mm/min - Grip width: 80 mm (max. opening 40 mm) - Compression plate distance: 150–400 mm - Compression plate diameter: 230 mm - Bending support distance: up to 1000 mm General Information - Year of manufacture: 1963 - Serial number: 1762 - Year of acquisition: 1963 - Grip separation: up to 1000 mm - Bending test: support distance 50–1000 mm - Shear test: 15 mm Ø specimens Condition The machine comes from a laboratory inventory, is complete, and was stored in working condition until recently. Due to its age, it is sold as untested and without warranty. Special Features - Robust industrial quality, made in Germany - Includes original documentation, type plates, and machine record - Ideal for collectors, museums, or restoration purposes 💡 Collection preferred (due to weight, approx. 2.5 t).

Year of construction: 2025, condition: as good as new (ex-display), Universal testing machine PM10 Force: 10 kN cross beam stroke: 700 mm Installation space: 400 mm Prodpfx Agod R Dpms Ded total height: 1230 mm Weight: ca.85 Kg Travel resolution: 0.01 mm testing speed: 1-500 mm / min Return speed: 700 mm / min Force transducer: 10kN incl. evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode via a numeric keyboard, so that a "quick test" can be carried out without a PC. For tests that require data storage and recording of the curve progression, we offer you the possibility of control and evaluation with the basic software. This allows to generate different test sequences and to create a test protocol. Furthermore, you have the possibility to process the raw data in your own programs. Optional: - Delivery & commissioning -DAkkS or factory calibration according to DIN EN ISO 7500-1 - Clamps: Pressure plates, bending devices, shearing devices, wedge clamps, shear clamps, peeling clamps, screw clamps, pneumatic clamps and hydraulic clamps.

Condition: used, SincoTec Type: Exciting Mot Resonance test bench POWER SWINGLY 20 kN The resonance test bench POWER SWINGLY BigTable is designed as a two-mass oscillator. It consists of an oscillating head excited by a frequency-controlled asynchronous motor using an unbalance motor, which is arranged in the upper part of the machine and generates the dynamic amplitude. The oscillating head is supported by pre-tensioned helical compression springs on the upper crossbeam and is guided centrally. The medium-load drive is arranged in the lower part of the machine and applies the static preload with the help of a gear motor via a spindle drive. The sample space is located above the clamping table and is limited at the top by the adjustable crossbeam. The test bench is controlled by the EXCITING MOT control system. The complete control electronics for the control system are housed in an industrial PC cabinet. The control cabinet is made of powder-coated sheet steel and meets protection class IP 50 according to EN 60529. Technical data: General data test bench: Total height of test bench 1840 to 2240 mm Height of machine table 1030 mm Width of test bench 800 mm Depth of test bench 1500 mm Height of sample chamber max. 600 mm (without force transducer) Free column passage 550 mm Maximum force amplitude 10000 N Maximum total force ±20000 N Maximum vibration path ±5 mm Test frequency 30 to 110 Hz Accuracy of the measuring sensors min. Class 1 (according to DIN EN 10002-3) Weight of test bench approx. 1880 kg Max. weight of clamping device 150 kg General data Control cabinet: Predpfovx Su Sex Ag Dsd Total height of control cabinet 1900 mm Height of table top 1080 mm Width of control cabinet 650 mm Depth of control cabinet 700 mm Weight of control cabinet 152 kg Color RAI 9006 (white aluminum), table top midnight Conditions for the installation location: Space requirement 2.5 x 2.5 m Required ceiling height 2.8 m Floor load capacity 170 N/cm² Power supply 400 V / 50 Hz (clockwise rotating field) Connection plug CEE socket, 2-pole, 16 A Fuse 16 A Connection and ambient conditions Mains conditions: Voltage 400 V rotating current with ΜΡ conductor and protective earth, clockwise rotating field Voltage fluctuations < ± 10% Short-term dips < 20 ms Limits for continuous interference Radio interference level A according to VDE0871 Frequency 50 Ηz ± 1% Protective earth Earthing resistance < 0.3 Ω Model: POWER SWINGLY MOT Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), max. wheel diameter 400 mm gear width 400 mm max. module 15 min. module 0,5 Control Klingelnberg workpiece weight 300 kg ical angle 0 - 90 ° Prodpjxqrhxofx Ag Dod centre distance 15 - mm weight of the machine ca. 1,9 t dimensions of the machine ca. 2,3 x 1,8 x 2,4 m Fully automatic CNC-controlled gear measuring center for spur gears and other gears depending on the software. Equipment for internal gears. Software: - Spur gear, hob measuring, worm checking

Year of construction: 2016, condition: used, Hoopmann Tank assembly and testing line for assembly of various tank components Composed of: Prsdpfx Agsxpxalj Dod approx. 7 assembly stations Helium leak tester Condition: Good

Condition: used, Year of construction: 2012, Lot consists of: (1) Tire Testing Machine Technical Details: Test wheel: 2 m, V/MAX: 350 km/h, max. load: 2,500 kg, camber angle: 0–6° (2012) Pjdpfx Aexf Awmjg Dsrd

Condition: good (used), Brüel & Kjær Vibration Test System 4812 + 4801 Shaker Technical Specifications – Exciter Head 4812 • Max. dynamic force: 445 N (100 lbf) with Body 4801 • Current consumption: 23 A RMS with cooling / 11.5 A without • Resonance frequency: 7.2 kHz • Travel: 12.7 mm continuous / 14 mm maximum • Acceleration limit: 981 m/s² • Bolt torque limit: 3.4 Nm • Dimensions: Ø 235 mm × 178 mm • Weight: 8 kg • Material: hard-anodized aluminum Technical Specifications – Exciter Body 4801 • Power supply: 380 V ±10% or 440 V ±10%, 3-phase, 50 Hz • Cooling: Air-cooled (integrated fan) • Mounting height (without head): 370–405 mm Predpfjxlz Uwex Ag Djd • Additional height due to head: +50 to +130 mm • Weight: 75–80 kg Description & Use: Condition: Used (see pictures). Note: For detailed technical specifications and processing instructions, we strongly recommend consulting the original data sheets or contacting the manufacturer directly. You can find more items – new and used – in our shop! International shipping costs upon request!

Year of construction: 2024, condition: as good as new (ex-display), Universal testing machine PM5 Force: 5 kN crosshead stroke: 520 mm working chamber depth: 66 mm total height: 1036 mm Podpfx Aed R Dqbeg Dsrd Weight: approx.48 Kg travel resolution: 0,01 mm test speed: 1-500 mm / min Return speed: 700 mm / min Force transducer: 5 kN incl. evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode via a numeric keypad, so that a "quick test" can also be carried out without a PC. For tests that require data storage and recording of the curve progression, we offer you the possibility of control and evaluation with the basic software. This enables you to generate different test sequences and to create a test protocol. Furthermore, you have the possibility to process the raw data in your own programs. Optional: - Delivery & Commissioning -DAkkS or factory calibration according to DIN EN ISO 7500-1 - Clamping fixtures: Pressure plates, bending fixtures, shear fixtures, wedge grips, shear grips, peeling grips, screw grips, pneumatic grips and hydraulic grips.

Condition: excellent (used), Zwick/Roell Zwick/Roell ProLine Universal Testing Machine Z010 TN – 10 kN Type: BT1-FB010TN.D30 For sale is a high-quality materials testing machine, model Zwick/Roell Z010 TN ProLine (BT1FB010TN.D30), supplied with comprehensive equipment. This system is ideally suited for tensile, compression, bending, and component tests and is offered with original Zwick software, accessories, and safety screen. Complete system Including safety screen (CE-compliant, with electric interlock) Prjdpfx Aow Uifdeg Dod Comprehensive accessories and software included Technical data of the testing machine: Model: Z010 TN ProLine, nominal force 10 kN Test area (W x H): 440 x 1050 mm Testing speed: 0.001 – 1000 mm/min, continuous up to nominal force High-precision guidance, very low noise emission High-resolution, maintenance-free DC motor Electrical connection adjustable in 6 voltage ranges Including interface card for force transducer (additional slot available for expansions) Expandable with options and modules Safety – Safety screen (included in delivery): Suitable for ProLine Z005TN, Z010TN, Z020TN With electric interlock and additional manual locking Makrolon pane, 6 mm thick, pivoting (hinged left) CE-compliant Mandatory for applications with risk of operator injury Force transducer: Xforce HP force transducer, nominal force 10 kN Accuracy class: 1 from 20 N, 0.5 from 100 N (according to ISO 7500-1) Extremely good linearity (

Condition: used, The Klingelnberg GKP 90 bevel gear testing machine was designed as a universal machine and is used by manufacturers of gears and transmission technologies for noise and contact pattern testing on bevel and hypoid gears. Technical Data • Diameter: 540 (400) mm • Hypoid: ±50 mm • Pinion spindle diameter: 90 mm • Dimensions (LxWxH): 1,800 x 1,800 x 1,600 mm • Machine weight: approx. 2,800 kg *Information and data are provided without obligation. Subject to prior sale. Pedpfx Agoxpq Nle Derd Special Features: The machine is intended for noise and contact pattern testing on bevel and hypoid gears of all gear types. By simulating operational conditions, applying various rotational speeds, and switching load states between drive and coast, the optimal installation distance for standstill can be determined. • Digital actual value display for 2 axes • Infinitely variable speed adjustment via frequency inverter • Electrically secured and removable safety guard • Accessories: Large number of workpiece holders • Condition: Very good

Year of construction: 2024, operating hours: 35 h, condition: like new (used), functionality: fully functional, For sale a used, fully functional ACT-400 Load Bank/Loadbank from AGG Power Technology, in operation since March 2025. Technical Specifications: Prsdoxvmxpepfx Ag Dsd Voltage: 3-phase four-wire, AC400V, 50/60Hz Maximum power: 510 kW Resistive load in 11 steps, freely combinable: 1 kW, 2 kW, 2 kW, 5 kW, 10 kW, 20 kW, 20 kW, 50 kW, 100 kW, 100 kW, 200 kW Power factor: 1 Deviation from setpoint: ±5% Communication: RS232 / RS485, Modbus-compatible Cooling: Forced air Operating environment: -20℃ to +55℃ Duty cycle: Continuous Serial number: 2407034 CE / ISO 8528-06 / GB/T 2820.5-2009 certified Notes: Installed outdoors, total operating hours approx. 15,815 kWh Available for pickup/shipping from December 2025 Palletizing possible, buyer arranges transport Price negotiable Location: Czech Republic

Condition: new, Year of construction: 2025, functionality: fully functional, CCT1600L A-M Pressure tester for cylinder head and block – new machine. Hydraulic tray lifting, motorized tray rotation. Technical details: Max. cylinder head capacities: Lenght x Width x Height: 1350 x 425 x 300 mm Capacity of stainless steel tank: 500 liter Pedpjncd Ecsfx Ag Dsrd Heating elements: 2 x 4,5 kw Hydraulic tray lifting Motorized tray rotation Hydraulic hoist: 0,75 kw Gear-motor: 0,25 kw Up and down travel time: 600 mm in 10 sec Thermostat: 0-90°C Power supply: 16kva-3x230v-ac-50/60hz Net weight approx: 600 kg Space requirements: Lenght x Width x Height: 2100 x 1050 x 1700 mm If you are interested, please contact me! More machines for sale: Berco, Comec, Sunnen, Carmec, Kwik-Way, Serdi, PEG Valve grinder, head and block resurfacer, valve seat milling, pressure tester, parts washer machines

Year of construction: 2025, condition: new, Universal testing machine PM50 Force: 50 kN cross beam stroke: 1200 mm Installation space: 400 mm Overall height: 1817 mm Weight: ca.380 Kg Travel resolution: 0.01 mm Testing speed: 0.03-1000 mm / min Return speed: 1000 mm / min Force transducer: 50 kN incl. evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode via a numeric keyboard, so that a "quick test" can be carried out without a PC. For tests that require data storage and recording of the curve progression, we offer you the possibility of control and evaluation with the basic software. This allows to generate different test sequences and to create a test protocol. Furthermore, you have the possibility to process the raw data in your own programs. Prsdpfxed R Dp Ee Ag Dsd Optional: - Delivery & commissioning - DAkkS or factory calibration according to DIN EN ISO 7500-1 - Clamps: Pressure plates, bending devices, shearing devices, wedge clamps, shear clamps, peeling clamps, screw clamps, pneumatic clamps and hydraulic clamps.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, Universal testing machine PM3 Pedsfdzupepfx Ag Derd Force: 3 kN cross beam stroke: 520 mm Working area depth: 66 mm total height: 1036 mm Weight: ca.40 Kg Travel resolution: 0.01 mm testing speed: 1-500 mm / min Cc7d2rmq Return speed: 700 mm / min Force transducer: 3 kN incl. evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode via a numeric keyboard, so that a "quick test" can be carried out without a PC. For tests that require data storage and recording of the curve progression, we offer you the possibility of control and evaluation with the basic software. This allows to generate different test sequences and to create a test protocol. Furthermore, you have the possibility to process the raw data in your own programs. Optional: - Delivery & commissioning - DAkkS or factory calibration according to DIN EN ISO 7500-1 - Clamps: Pressure plates, bending devices, shearing devices, wedge clamps, shear clamps, peeling clamps, screw clamps, pneumatic clamps and hydraulic clamps.

Year of construction: 2025, condition: as good as new (ex-display), Universal testing machine PM3 Force: 3 kN cross beam stroke: 520 mm Working area depth: 66 mm total height: 1036 mm Weight: ca.40 Kg Travel resolution: 0.01 mm testing speed: 1-500 mm / min Psdpfx Agod R Dpus Derd Return speed: 700 mm / min Force transducer: 3 kN incl. evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode via a numeric keyboard, so that a "quick test" can be carried out without a PC. For tests that require data storage and recording of the curve progression, we offer you the possibility of control and evaluation with the basic software. This allows to generate different test sequences and to create a test protocol. Furthermore, you have the possibility to process the raw data in your own programs. Optional: - Delivery & commissioning -DAkkS or factory calibration according to DIN EN ISO 7500-1 - Clamps: Pressure plates, bending devices, shearing devices, wedge clamps, shear clamps, peeling clamps, screw clamps, pneumatic clamps and hydraulic clamps.