Used Testing for sale (10,251)

Condition: excellent (used), Vötsch Model: VT 7012 S2 Shock Test Chamber, Air-cooled Two-chamber design Hot Chamber: The temperature range of the hot chamber extends from +50°C to +220°C Temporal temperature deviation at the center of the usable space: ± 1 K Spatial temperature deviation: ± 2 K Temperature change rate Heating: 11 K/min Cold Chamber: The cold chamber temperature range is from -80°C to +70°C Temporal temperature deviation at the center of the usable space: ± 1 K Spatial temperature deviation: ± 2 K Temperature change rate Heating: 2 K/min Bodpfxewxc I Uj Aa Uocw Cooling: 3 K/min Test chamber volume: 125 liters Hot chamber temperature range: +50°C to +220°C Cold chamber temperature range: -80°C to +70°C Test chamber dimensions: Width 470 mm, Depth 650 mm, Height 410 mm External dimensions: Width 930 mm, Depth 2115 mm, Height 1970+ mm Port diameter: ∅ 67 mm Voltage: 3/N/PE AC 400V +10% 50 Hz Nominal power: 10 kW Nominal current: 25 A Refrigerants: R452-A / R23 Weight: 1,000 kg Important information for your safety as a buyer! The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see image) (Specifications and technical details are subject to change and correction!) For further questions, please feel free to contact us by phone.

Condition: excellent (used), Vötsch Type: VT 4034 Vötsch Temperature Cabinet VT 4034 Air-Cooled Refrigerant: Converted to R-452 A Internal dimensions: Height 750 mm, Depth 765 mm, Width 580 mm External dimensions: Height 1780 mm, Depth 1595 mm, Width 865 mm Temperature range: -40°C to +180°C Temperature deviation: temporal ± 0.1 to ± 0.5 K spatial ± 0.5 to ± 2.0 K Heating 3.2 K/min Cooling 3.5 K/min Maximum load (evenly distributed across the surface) of the test chamber floor: 60 kg per insert: 30 kg Total load of the grate supports: 80 kg Test chamber lighting: 24 V halogen bulb 50W Rated voltage: 3/N/PE AC 400V ± 10% 50 Hz Bjdpfowd Hpasx Aa Uscw Rated power: 4.1 kW Rated current: 12.5 A Fuse provided by the customer: 16 A slow-blow Refrigerant: R-452A Weight: 490 kg / 335 liters For your safety, the following information! The following steps are carried out on our chambers in advance: 1. Functional test and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Liebisch Type: K1000 M-TR / 4203.6101 USED Liebisch K1000 M-TR Constacon – Manual Chest-Type Apparatus Corrosion/Condensation Test Chamber (Chamber volume: 1000 l) Item Description: For sale is a used Liebisch K1000 M-TR, a robust and high-quality chest-type unit designed for conducting condensation water tests. Ideally suited for laboratories, quality control, or industrial applications. Technical Specifications & Features: Model Variant: Constacon K 1000 M-TR – Condensation Water Unit without Ventilation Chamber volume: approx. 1000 liters Operation mode: Manual (Type M-TR) External dimensions (W x D x H): 2600 × 1120 × 1210 mm Internal chamber dimensions (W x D x H): 1535–1425 × 800–780 × 660–650 mm Testing standards: Bcjdpfow Tbdpjx Aa Ujw For condensation (Constacon): DIN 50958, DIN EN ISO 6270-1/-2 Control: Simple manual control panel – parameters such as temperature and operation mode are set directly on the device. Temperature regulation: PID controlled, typical setpoints: Condensation tests: approx. 40 °C (up to max. 50 °C) Heating time: approx. 1 hour Weight: approx. 400 kg Condition: used Scope of delivery: (see picture) (Specifications and information are subject to change and error!) For further questions, we are happy to assist you by phone.

Condition: excellent (used), Type: VCS 7034-5 Climate Test Chamber Water-Cooled Test chamber volume: 335 liters Performance for temperature tests: Temperature range: -70 to +180°C Temperature deviation over time: ±0.1 to ±0.5 K Temperature deviation spatially: ±0.5 to ±2.0 K Temperature gradient: 1 to 4 K Bcedpexufypefx Aa Ujw Change rate: Cooling: 3.5 K/min Heating: 6.8 K/min Heat compensation at +20°C: 3,000 W / at -20°C: 3,000 W Temperature calibration points: +23°C and +80°C Performance for climate tests: Temperature range: +10 to +95°C Temperature deviation over time: ±0.1 to ±0.3 K Temperature deviation spatially: ±0.5 to ±1.0 K Temperature gradient: 1 to 2 K Humidity range: 10 to 98% Humidity deviation over time: ±1 to ±3% Dew point range: -3 to +94°C Heat compensation: 400 W Climatic calibration points: +23°C / 50% RH and +95°C / 50% RH Test chamber dimensions: Width: 580 mm, Depth: 765 mm, Height: 750 mm External dimensions: Width: 870 mm, Depth: 1595 mm, Height: 1775 mm Feedthroughs: 1 x approx. 50 mm Ø, left side 2 x approx. 125 mm Ø, left side 1 x approx. 125 mm Ø, right side Electrical connection: 3/N/PE AC, 400 V ±10% 50 Hz Rated power: 10 kW Rated current: 21 A Sound pressure level: 64 dB(A) Cooling water consumption: 1.4 m³/h Refrigerant: R404A / R-23 For your security as a buyer, please note the following information: The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Specifications and technical data are subject to change and errors!) If you have further questions, we are happy to answer them by phone.

Condition: used, SincoTec Model: POWER SWING 100 MOT Big Table The SincoTec POWER SWING 100 MOT is a high-performance resonance test bench designed for fatigue testing of materials and components. This system enables dynamic load testing with high forces (up to ±100 kN) while ensuring precise control. Typical applications include lifetime testing, fatigue strength testing, and component validation under realistic conditions. With its robust construction, precise sensors, and stable granite table, the test bench is ideally suited for research, development, and quality control in both industrial and academic settings. Bedpfx Aexrlkvsa Ujcw Notes: The resonance test bench is particularly well-suited for material and component testing under dynamic loads. Technical Data: General Data – Test Bench: - Overall height: 1215 mm (without clamping fixture) - Width: 2005 mm - Depth: 1205 mm - Maximum force amplitude: 50 kN - Maximum total force: ±100 kN - Sensor accuracy: at least class 1 (according to DIN EN 10002-3) Control Cabinet: - Overall height: approx. 1800 mm - Table height: 1080 mm - Width: 650 mm (narrow tabletop) / 1420 mm (wide tabletop) - Depth: 700 mm - Weight: 180 kg (with granite tabletop approx. 240 kg) - Color: RAL 9006 (white aluminum), tabletop midnight Installation Requirements: - Required space: 4.3 × 3.0 m - Minimum ceiling height: 2.5 m - Floor load capacity: 2.0 t/m² - Power supply: 400 V / 50 Hz (three-phase, clockwise rotation) - Connection: 5-pin CEE socket, 16 A - Fuse protection: 16 A - Weight: approx. 3.6 t Condition: used Scope of delivery: (see picture) (Subject to modifications and errors in the technical data; all information provided without guarantee!) If you have any further questions, please do not hesitate to contact us by phone.

Condition: excellent (used), Type: SAL 1000-FL PLC / V.715.362.520 For sale is a used VLM Salt Spray Corrosion Test Chamber, type SAL 1000-FL PLC, ideal for industrial corrosion tests in accordance with international standards (DIN EN ISO 9227, ASTM B117). Perfectly suited for both laboratory and production environments to test materials, coatings, and components under controlled corrosive conditions. Features: - Robust stainless steel frame construction, max. load 450 kg - Precise control and reproducible testing - Versatile applications for salt spray, condensation water, and ventilation testing Technical details: - Exterior: Stainless steel 1.4301, powder-coated (special version) - Test chamber: Stainless steel, ECTFE-coated - Max. chamber temperature: +80 °C - Temperature stability: ±0.3 °K, temporally ±0.1 °C - Process control: PLC with touchscreen, LED display - Interface: Ethernet - Water quality: demineralized, max. conductivity 20 µS/cm - Humidifier water consumption: approx. 0.5 l/h (depending on program) - Water connection pressure: 2–4 bar - Compressed air consumption: approx. 20 m³/h - Compressed air connection: 6–8 bar - External dimensions (W x D x H): 2160 x 670 x 1090 mm incl. base cabinet: 2160 x 670 x 1890 mm - Internal chamber dimensions (W x D x H) / volume: 1400 x 605 x 920 mm / 1040 l - Max. load sample rod: 40 kg - Electrical connection: 400 V / 50 Hz / 4000 W - Weight (empty): 350 kg Condition: used Scope of delivery: (see image) (Subject to changes and errors in technical data and specifications!) Bjdjxnyqvopfx Aa Ujcw For further questions, we are happy to assist you by phone.

Condition: excellent (used), Here we offer a climatic test chamber. Air cooled Nominal test chamber volume: 280 liters Bcjdsiz Tqcjpfx Aa Uow Dimensions Test chamber outside: 1500 x 2040 x 1075 mm Fan motor and door disassembled: 1500 x 1940 x 925 mm test chamber: 720 x 690 x 560 mm door, clear width: 720 x 690 mm viewing window, heated: 500 x 600 mm Temperature range +5 to +100 C heating: 4,0 K /min Cooling: 0.6 K /min Climate range +10 to +95 C Humidity range: 10 to 95 % r.H. Humidity difference, temporal: ≤ ± 3.0 Water connection humidifier: city water or distilled water 20l reservoir tank. Mains connection: 400 V 3/N/PE, AC, 50 Hz Power requirement max : 6,3 kW Weight : 500 Kg Type : 3416/16 Refrigerant : R134a For you as a buyer for safety the following information! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. new filling with legally compliant refrigerant 3. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Here we offer a Feutron climate test cell. Feutron climate test cell Temperature Temperature range: -40...90°C Climatic range (without heat load) 10...85°C Temperature difference,temporal during temperature operation ≤ ± 0.5 K/min. Temperature difference,temporal at climatic operation ± 1,0... ± 1.5 K/min Rate of change Heating 2.0 on average K/min Cooling 2,0 in average K/min The IEC 1646 standard can be realized with testing, solar modules with max. 160kg weight and non-linear ramps. (setpoint step change) can be realized Drying Air drying Condensation drying Humidity Humidification of air Steam humidification Humidity range 10... 95 % r.h. Humidity difference,temporal ≤ ± 3,0... ±5.0 %r.H. Dew point range 8... 80,9 °C Test room Test room volume 7.0m³ Dimensions Test room dimensions width 1500 mm x height 2250 mm x depth 2000 mm Revolving door DIN right heated,i,l.. width 900 mm x height 2100 mm Viewing window, heated with darkening flap and lockable Width 500 mm x height 600 mm Feed-through opening 2x in front side right ∅ 75 mm Irradiation unit test room Cut-out 4x in side panel left for SC 2500 850 x 700 mm each Area to be irradiated when using SC 2500 1200 x 1200 mm Intensity of radiation at 1.0 m distance from wall 1000 ± 10% W/m² Lighting 1xhalogen lamp 200W Refrigeration system Bitzer compressor semi-hermetic 2-stage,air-cooled Condenser: split condenser (outdoor installation winter control) Refrigerant R507 /R23 Temperature control system Bcsdpsklv H Iofx Aa Uew Cooling brine medium Tyfocor / water Mixing ratio 50/50 Density of cooling brine 1,072 kg/dm³ Filling quantity approx. 80dm³ Pyranometer Temperature range -40... 150°C Max. Radiation absorption 4000 W/m² Spectral range (50% points) 305... 2800nm Sensitivity (norminal) 7 µV/W/m² Power supply Test cell Electrical mains connection 400V, 3/N/PE, AC, 50Hz Connection type fixed connection Max. simultaneous power requirement approx. 32.0 kW Supply line fuse 3 x 63, Char C (A) Power supply SolarConstant Electrical mains connection 400V, 3/N/PE, AC, 50Hz Connection type Max. simultaneous power requirement approx. 30.0 kW Supply line fuse 3 x 63, Char C (A) Outer dimensions of the test cell complete with: Genset room/switch cabinet and control cabinet for SolarConstant 2500 Outer dimensions of aggregate room width 3440 mm x height 2580 mm x depth 2950 mm /switch cabinet width 2200 mm x height 1830 mm x depth 1100 mm Outer dimensions of condenser, split width 900 mm x height 950 mm x depth 2000 mm Mass of test cell, total approx. 2700 kg Mass of condenser, empty 153 kg Weight : 2700 Kg Type: 3707/06 Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Here we offer a Weiss climate test chamber. Designation: SB2/500/80 water cooled Cold-heat operation: -75°C ...+180°C Climatic operation: +10...+95°C Humidity range: 10...98 % r. h. Temperature constancy, temporally ± 0.2K Humidity constancy: ±1 r.F. Temperature rate of change: Cooling: approx. 1.4 K/min Heating up: approx. 2.5 K/min External dimensions: Height 1980 mm, width 1265 mm, depth 1365 mm Feedthroughs: left side: ∅ 100 mm right side: ∅ 50 mm The connection voltage is: 400V/3Ph+N+PE/ 50 Hz Power: 10,4 kVA Weight: approx. 720 kg Refrigerant R404a / R 23 For you as a buyer for safety the following information! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components Bcsdom Tvzcepfx Aa Ujw 2. new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Type: SB2/500/80 Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Here we offer you a Zwick / Roell tensile testing machine table-top testing machine.Zwick / Roell material testing machine BDO-FB0.5TH load in tensile / compression direction 500 N height 1565 mm , width 292 mm , depth 469 mmwidth of the test surface: infiniteTest range depth: 100 mmMax working stroke w.o. Accessories 1266 mmPC or printer interface RS 232Required PC connection (for PC operation) COM 1Performance data: 115/230 V (PH, N, PE)Rated power : 0.4 kVAN power frequency: 50/60 HzWeight: 47 kgType: BDO-FB0.5THCondition: used / usedScope supplied: (See picture)(Changes and errors in the technical data, details reserved!)We will be happy to answer any further questions you may have on the phone. Bcjdpod Sr S Isfx Aa Uow

Condition: excellent (used), RMS vibration exciter with power amplifier and cooling fan Bsdpfsgkafiex Aa Uscw Here we offer you a RMS vibration exciter with power amplifier. Vibration exciter SW 1507 Max force 2158 N max. speed 1,3 ms Power amplifier TGA 1500 3 x 380V/ 50Hz/ 35A / 8 kVA Condition: used / used Scope of delivery: (see picture) (Changes and errors in technical data, specifications are reserved!) Further questions we can answer on the phone for you. Written order possible by email or fax

Condition: excellent (used), RMS Vibration test system Here we offer you a RMS electrodynamic vibration test system. RMS Vibration Test System Test Manager SWR 900 Vibration exciter SW 3006 30V-50A-3434 N power amplifier TGA 3000-000.00 Condition: used / used Untested! Tests were not possible Scope of delivery: (See picture) (Changes and errors in the technical data, data are reserved!) Bsdpfxegk I I To Aa Ujcw Further questions we can answer on the phone for you. Written order possible by email or fax

Condition: used, Zwick / Roell Type: LTM10 Max test frequency: 100 Hz depending on the amplitude Dynamic test force in tension/compression: 10 kN Static test force in tension/compression: 7 kN Piston stroke: 60 mm Positioning and repeat accuracy: +/- 2 µm Speed range: 1 mm/min - 1 m/s Test chamber height without force transducer: 1170 mm Weight with linear motor: 1065 kg (without control unit) Maintenance: according to maintenance specifications, partly by Zwick/Roell Accessories: screw clamps, software (TestXpert research) Connection 400V 50/60 Hz 32A 3Ph/PE Condition: used Scope of delivery: (see picture) Bcsdpsv Ifgtsfx Aa Uow (Changes and errors in the technical data, information are reserved!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Kübrich Kübrich test systems 48V belt starter generator - component test bench Details of the test stand: (see Fig. 13) Frame with (1) Mounting device for a belt starter generator (2) Load machine (3) Belt Bsdpfx Aajumv Eme Uscw (4) MP1: Switch cabinet (5) MP3: Control cabinet for the control system, transfer plate with main switch, I/O (6) MP2: Switch cabinet with Simotion (7) MP4: Switch cabinet with DC-DC converter (8) H3: Measurement technology box (9) H4: Transfer box Intended use: The test stand is used to carry out tests on belt starter generators during development. Technical data: Electrical connection data Power supply: 400 V / 32 A Battery simulation: 0 - 60 V Current: 0 - 250 A (continuous) Current intensity: 330 A (short term, less than 1 s) Control voltage 24 V Mechanical performance data according to the data sheet of the load machine A transmission ratio of 1:2 to the test specimen shaft must be observed. Speeds: Load machine: Set-up mode: 0 - 50 1/min Automatic mode: 0 - 10 000 1/min Test specimen motor: Set-up mode: 0 - 100 1/min Automatic mode: 0 - 20 000 1/min Dimensions and weight Width: 850 mm Height: 1386 mm Length: 1687 mm Weight: approx. 1.2 t Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: good (used), Heraeus Vötsch Type: VTS 7034-5 Heraeus Vötsch temperature test chamber water-cooled Temperature range -70°C to + 180°C Temperature deviation temporal ± 0.1 to ± 0.5 K Temperature deviation in terms of time ± 0.5 to ± 2.0 K Temperature change rate cooling 5.0 K/min Temperature change rate heating 6.5 K/min Heat compensation +20°C 3000 W Thermal compensation -20°C 3000 W Test chamber dimensions: Width 580 mm Depth 765 mm Height 750 mm External dimensions: Width 870 mm Depth 1595 mm Height 1775 mm Test chamber volume 335 liters Rated voltage: 3/N/PE AC, 400V ±10 %, 50Hz Bcsdpfxjun Izco Aa Uow Rated power: 10 kW Rated current: 21 A Sound level at 1m distance (free-field measurement) < 69dB (A) Lateral feed-through 5.5 cm / 12.5 cm Cabinet is water-cooled Refrigerant: R- 404A and R 23 Weight approx. 570 kg The following information for you as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. refilling with legally compliant refrigerant 3. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated devices. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: good (used), Here we offer you a S & A test chamber for parametric testing. Bcjdpfx Aecnic Doa Usw Temperature range -55 ° C to 200 ° C (LCO2) -65 ° C to 200 ° C (LN2) Temperature change rate 15° C / min (Standard Option) 60° C / min (Fast Option) Stability ± 0.2 ° C (including effects of mains voltage, ambient temperature between between 15° and 45° C and aging) Uniformity ± 1.0 ° C Max from -65 ° C to -55 ° C ± 0.5 ° C Max from -55 ° C to + 125 ° C ± 1,0 ° C Max from + 125 ° C to + 200 º C Coolant: LCO2 Chamber can be controlled remotely via IEEE bus or RS232C interface Weight approx. 61 kg Type: 4365A Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, details are reserved!) Further questions we can answer gladly on the phone for you.

Condition: excellent (used), Here we offer a Weiss temperature chamber. Weiss temperature test chamber With S!MCON / 32 control Air-cooled (refrigerant converted to R-452A) Touch panel" control unit All control and operating commands can be triggered on the "touch panel" control unit by simply touching the function icons. all control and operating commands by simply touching the function icons. Levelling feet To compensate for uneven floors and to ensure adequate ventilation of the machine part, the test chamber is equipped with adjustable feet. Feed-throughs The test chamber is equipped with feed-throughs on the right and left side. Measuring cables and test equipment can be routed through these into the test chamber. Feed-through built into basic equipment R1: NW 125 mm L1: NW 50 mm Test chamber capacity: approx. 600 liters External dimensions with hinges and door lock Height 1995 mm, width 1090 mm, depth 1660 mm External dimensions without hinges and door lock Height 1995 mm, width 1000 mm, depth 1660 mm Internal dimensions: Height 950 mm, width 800 mm, depth 800 mm Data for temperature tests: Temperature range: -42 to +180 °C Temperature deviation over time in the center of the usable space: ± 0.1 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1.5 K Temperature change rate (according to IEC 60068-3-5) Heating: 4.0 K/min Cooling: 3.0 K/min Heat compensation max. 2500 W Data for operation: Test room lighting Halogen bulb 2 x 24V, 50W Nominal voltage: 3/N/PE AC 400V ±10% 50Hz Rated current: 15 A Rated power 7.8 kW On-site fuse 16 A slow-blow Sound pressure level approx. measured at a distance of 1m from the front. 1m height 61 dB(A) Refrigerant: R-452A Weight: 620 kg Type: WT3-600/40 The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components Bcjdpfsrak S Djx Aa Uew 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Vötsch Type: VC 7018 Vötsch Climatic Test Chamber VC 7018 Water-Cooled Touch Panel Control Unit On the touch panel control unit, all control and operating commands can be triggered by simply touching the function symbols. Adjustable Feet To compensate for uneven floors and ensure adequate ventilation of the machine section, the test chamber is equipped with adjustable feet. Ports The test chamber is equipped with port holes on the right and left sides. These allow measurement cables and test equipment to be routed into the test chamber. Feedthrough included in standard equipment R1: NW 125 mm L1: NW 50 mm Test chamber dimensions: Width 580 mm x Depth 450 mm x Height 750 mm Housing dimensions: Width 870 mm x Depth 1280 mm x Height 1745 mm Characteristics for temperature tests: Temperature range: -70°C to +180°C Temperature ±0.1 to ±0.5 K Spatial ±0.5 to ±2.0 K Bjdpfx Aajxugirj Uecw Temperature change rate according to IEC 60068-3-5 Heating: 4 K/min Cooling: 2.3 K/min Characteristics for climatic tests: Temperature range: -10°C to +95°C Humidity range: 10% to 98% r.h. F. Temperature deviation over time in the center of the usable space ± 0.1 to ± 0.3 K Temperature deviation over space ± 0.5 to ± 1.0 K Temperature gradient 1 to 2 K Humidity deviation over time in the center of the usable space ± 1 to ± 3 %RH Electrical connection: Nominal voltage: 3/N/PE AC 400V ±10 50Hz Nominal power: 5.9 kW Nominal current: 12.0 A Connection cable: 3.5 m Fuse protection: 16 A slow-blow, provided by the customer Refrigerants: R-404A and R-23 Test chamber capacity: approx. 190 liters Weight: approx. 460 kg net For your safety, the following information is provided as a buyer! The following steps are performed on our offered chambers in advance: 1. Functional testing and replacement of necessary components 2. Refilling with legally compliant refrigerant, if necessary 3. Leak testing with a certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Heraeus Vötsch Type: VCS 7018-5 Climatic Test Chamber with Humidity Control, Water-Cooled Test Chamber Dimensions: Width 580 mm x Depth 450 mm x Height 750 mm Housing Dimensions: Width 870 mm x Depth 1280 mm x Height 1775 mm Characteristics for Temperature Tests: Temperature Range: -70°C to +180°C Temperature Range: ± 0.1 to ± 0.5 K Spatial Range: ± 0.5 to ± 2.0 K Temperature Gradient: 1 to 4 K Temperature Rate of Change according to IEC 60068-3-5 Heating: 7.5 K/min Cooling: 7.5 K/min Characteristic values for climatic tests: Temperature range +10 to +95°C Humidity range: 10 to 98% RH Temperature deviation over time: ± 0.1 to ± 0.3 K Temperature deviation over space: ± 0.5 to ± 1 K Temperature gradient: 1 to 2 K Humidity fluctuation over time: ± 1 to ± 3% RH F. Dew point range -3 to +94 °C Electrical connection: Nominal voltage: 3/N/PE AC 400V±10% 50Hz Nominal power: 10 kW Nominal current: 21 A Fuse protection: 32 A slow-blow, provided by the customer Refrigerant: R-404A / R-23 Test chamber volume: approx. 190 liters Weight: approx. 460 kg For your safety, please note the following information! Bcsdov N Hc Eopfx Aa Uow The following steps are carried out in advance on our chambers: 1. Functional testing and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical specifications!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Espec Type: TPC-212D Technical Specifications Test Procedure: HAST – Highly Accelerated Stress Test Model: Espec TPC-212D Internal Volume: 2x (approx. 22 liters) Internal Dimensions (ø x L mm): 2x 295 x 330 mm Temperature Range: +105 °C to +142.9 °C Humidity Range: 75% to 100% RH Pressure Range: 0.02 to 0.196 MPa gauge (0 to 28 psig) Power Supply: 220 V (±5%), 1-Phase, 50/60 Hz, 20 A Special Features: Two chambers in one device Notes: Two chambers: Allow for simultaneous tests with different parameters or larger test volumes. HAST test: Accelerated endurance test under high temperature and humidity with overpressure for the qualification of electronic components. Applications: Ideal for semiconductors, ICs, circuit boards, MEMS, etc. Weight: 230 kg Condition: Used Scope of delivery: (See image) Bcjdpfswl D Aasx Aa Usw (Subject to change and errors in the technical data, information is subject to change!) We are happy to answer any further questions over the phone.

Condition: good (used), Zwick Type: BT2-FZ0.5TS.D16 500 N + Xforce P 500N Materials Testing Machine Test force in tension/compression: 500 N Overall height, without head traverse: 789 mm Overall width: 411 mm Bcjdsw Ib Uwepfx Aa Ujw Overall depth: 622 mm Footprint: Net standing area: 0.008 m² Load frame base area: 0.196 m² Specific floor load: Based on typical equipment: 0.85 kg/cm² With 50% safety margin: 1.28 kg/cm² Ceiling load: Based on typical equipment: 97 kN/cm² With 50% safety margin: 146 kN/cm² Working space depth: 105 mm Working space height with upper mounting bracket: Minimum height: 235 mm Maximum height: 565 mm Working space height with lower mounting bracket: Minimum height: 90 mm Maximum height: 420 mm Weight: approx. 78 kg with extras Condition: used Scope of delivery: (see picture) (Changes and errors in technical data and specifications are reserved!) We are happy to answer further questions by phone.

Condition: excellent (used), Zwick Type: BZ2.5/TN1S Zwick table testing machines Tensile strength measuring machine Bcodpofnm Dqefx Aa Uew Area of application: Wide range of applications, from plastic and elastomer testing to paper, textile, foam and wire to component testing. Load frame: Max. test force FN in tension/compression direction 2.5 kN Height (h1) approx. 770 mm Width with electronic unit 320 mm Depth with electronic unit 414 mm Height of the work area h min ... h max: Traverse angle mounted upwards 227 ... 573 mm Traverse angle mounted rotated by 180° 57 ... 403 mm (each without connection bolt) Connection values: Electrical connection 115/230 V 4/2A-1PH/PE/N Power consumption 0.4 kVA Mains frequency 50/60 Hz 2.5 kN Condition: used Scope of delivery: (see image) (Changes and errors in the technical data, information are reserved!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), CTS Climate test chamber C-55/1000 Li water-cooled Temperature range: -50°C to +100°C Humidity range: 5 to 95% RH Dew point range: 5°C to +78°C Rated voltage: 400V 3/N 50Hz Rated power: 9.5 kW Nominal current: 18 A Compressor: TFH2511Z / TFH2511Z Refrigerant R404A/R23 The type designation of the CTS cabinet series is composed as follows: z. e.g. type C -55/1000/Li 1) C means: climate 2) -55 means: lower temperature -55 °C 3) 1000 means: 1000 liter test chamber volume 4) Li means: special equipment for tests with lithium-ion accumulators Control: 32 bit controller LCD control panel Digital display of set and actual values Numerical input of setpoints Error messages in plain text Ethernet interface RS 232 interface Free switching channels for on-site test material control Test room lighting: energy-efficient, high-intensity LED light strip mounted on the door Insert grid: Stainless steel, support surface 970 x 980 mm Load per shelf max. 35 kg Total load with max. grating load 100 kg 1a Feed-through NW50 1b Feed-through 2x NW125 1c Entry port 2x Rp 314° for Minimax Technical performance data: Temperature tests: Temperature range -50°C to +100°C Temperature deviation ≤ ±0.3 K in time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 2.5 K/min Heat compensation approx. 4000 W at +20°C approx. 2200 W at -40°C Climate tests: Temperature range +5 °C to +95 °C Humidity range 5% to 95% rel. humidity Dew point range +5°C to 78°C Temperature deviation ≤ ±1.0 K in time Humidity deviation ≤ ±3.0% relative humidity over time The technical data refers to an ambient temperature of +25 °C, rated voltage 400V, without test material, without heat compensation and without additional equipment. Options may influence the performance data. Dimensions: Test volume 1000 liters Test chamber dimensions Height, approx. 1000 mm, width, approx. 860 mm, depth, approx. 1100 mm External dimensions Height, approx. 1950 mm, width, approx. 1270 mm, depth, approx. 1900 mm Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Nominal current 18 A Rated power 9.5 kW Protection class IP 54 Sound pressure level < 58 dB(A) (according to DIN EN ISO 3744 measured at a distance of 1 m from the front) Mass approx. 1000 kg Heat output to the installation room 10.4 kW Cooling unit: water-cooled, low-noise, fully hermetic Infinitely variable output adjustment via electronic monitoring and control system, environmentally friendly refrigerant R404A/R23 The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate Bsdpfx Aaeva Hi Hs Ujcw 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: good (used), Siga Type: GS-517-400 External dimensions LxDxH 4960 x 2500 x 2400 mm. Bcodpju Aa A Aofx Aa Uow Complete system is calibrated according to DAKKS and and therefore approved for approval-relevant tests Butane loading speed - infinitely variable from 5 g/h to 77 g/h Loading speed fuel - infinitely variable from 5 g/h to 100 g/h Fuel temperature control - infinitely variable from 20°C to 50°C Fuel quantity selectable - from 0 l to 8 l Selectable breakthrough criterion - from 1g to 10g Purge air flow temperature - Infinitely variable from 25°C to 30°C Precision scales for test piece and reference AKF - Measuring range up to 6 kg, 0.1 8 resolution Purging vacuum - Infinitely variable from 0 hPa to 30 hPa Rinsing air flow - infinitely variable from 1 l /min to 60 l/min Humidity purge air flow - infinitely variable from 10% rH to 85% rH Number of cycles from 1 to 999 (load/purge) Condition: gebraucht / used Sale ex location! Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Weiss Type: SWT 200/400 Weiss spray and splash water test cabinet The penetration of water into the housing is tested. In conjunction with a timer, the test cycle can be automated with an adjustable test time of 3 seconds to 30 hours. According to DIN VDE 0470 T1 or EN 60529 for tests according to protection classes IPX3 and IPX4. The integrated circulation device means that water consumption can be reduced to a minimum. Features Glass door with wiper Pneumatic drive of the swivel tube Adjustable swivel angle Replaceable swivel tubes Nozzle holder swivels and can be replaced Adjustable water volume flow and measurement Control of the test duration Data for mechanical stress Max. load with test material (evenly distributed over the surface) Permissible test material weight for test material carrier (total) 25 kg Spray radius 200 mm / 400 mm Data for IP protection class tests Swivel speed approx. 60°/s Swivel angle IPX3 approx. ± 60° Swivel angle IPX4 approx. ± 180° -10° Dimensions: External dimensions with control cabinet (D x W x H) approx. 1000 x 1350 x 1,900 mm External (D x W x H) approx. 1000 x 1000 x 1,900 mm Internal dimensions (D x W x H) 400 x 650 x 750 mm Data for operation Voltage: 3/N/PE AC 400V ±10% 50hz Rated power 1.5 KW Rated current 6.0 A Weight: 375 kg Condition: used Bsdpfx Aovzz A Rja Uocw Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.