Universal testing machine

ZwickRoell Zwicki Z2,5

Condition: good (used), Zwick Type: BZ1.0 / TH1S Zwick table testing machines Zwick with a maximum force of 1.0 kN. The course of the traverse: 1150 mm. Testing speed: 0.1 ... 1800 mm / min Ncedpfx Ameddantsnjt Scope of delivery. (See pictures) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: good (used), Year of construction: 1994, functionality: fully functional, pressing force: 1,000 t, table width: 1,500 mm, distance table to ram: 1,750 mm, total length: 2,700 mm, Used 1000ton hydraulic press for sale 1000TON PRESS SIDE FRAME Max TYPE CAPACITY 1000ton PRESSURE 175kgf.cm2 STROKE 1000mm DAYLIGHT 1750mm BOLSTER AREA 2700mm x 1500mm Nsdpfx Amsucdgpjnoct PULL BACK CAPACITY 52.7ton DIE CUSHION CAPACITY 50ton DIE CUSHION STROKE 180mm MAIN MOTOR 415v 50hz 6p 110kw OIL TANK CAPACITY 1800L

Condition: excellent (used), Haida Type: HD-B604-S Sensor: TECSIS load cell Max. Capacity: 2T / 20 kN Unit: G, kg, N, LB (adjustable) Resolution: 1/250,000 Accuracy: ± 0.5% Max. Stroke: 700 mm (without fixture) Test speed: 0.1-500mm/min (adjustable) Voltage: 220V AC ± 10%, 50/60Hz Clamping jaws: 0-7 mm Weight: approx. 175 kg Dimensions (WxDxH): 88 x 50.5 x 150 cm Condition: used Ncedpfx Amjr Ixq Rsnet Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: as good as new (ex-display), Year of construction: 2008, machine/vehicle number: LSP 100T, Productions-Hydraulic press with H-column 100t with guidance Manufacturer: Stenhoj Denmark Year of construction: 2008 Pressure force max. 1,000 kN / 318bar Press cylinder, stroke length: 400mm Press table with T-slot 1,500x900mm above 1,500x1,050mm below Stand passage 1,700mm Condition as good as new, the machine was only used for test runs and has been in stock since then. Ncjdpeg Rn Efefx Amnst All statements without guarantee. Without transport costs.

Year of construction: 2024, operating hours: 4 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: H2,5TMNI, Universal testing machine H 2,5 TMNI L Please always send your mail address. mechanical construction: Single spindle universal testing machine with backlash-free ball screw in C-frame design with spindle protection and brushless drive motor, Fmax = 2.5 kN Ncedpfx Aemdn Tremnjt 1 working chamber up to nominal load: Working chamber depth: 105 mm max. test stroke without test tools, adapter and KMZ: 1375 mm max. test area height (between lower fixed and moving crosshead) without test tools, adapter and KMZ: 1375 mm Travel speeds: Test speed 0.005 - 1200 mm/min up to nominal load return speed 1200 mm/min Force measurement: Measuring range depending on the force sensor used 0.4 - 100 % of the nominal load class 1 (optionally class 0.5) according to DIN EN ISO 7500-1 and ASTM E4. Resolution of the force measurement depending on the integration time between: +/-160,000 and +/-900,000 digits. The machine is delivered with a factory test certificate. If, at the customer's request, a factory or DAkkS calibration is to be carried out at the installation site, this expense must be invoiced separately. Crosshead travel measurement: Incremental rectangular input with encoder monitoring, storage of crosshead position. Resolution of the crosshead travel measurement:

Condition: used, Year of construction: 1999, Pressure 400 t stroke 800 mm distance between columns 2820 mm Side window 950 x 1100 mm distance table/ram (stroke up) 1600 mm table surface area 2800 x 1200 mm die cushion capacity in table 150 t die cushion stroke in table 200 mm die cushion area in table 2000 x 800 mm table height over floor 650 mm ram surface 2800 x 1200 mm speed down 420 mm/s speed up 300 mm/s working speed 17,5 - 29,5 mm/s oil volume 2500 l power requirement 75,0 + 22,0 kW Weight 50,0 t dimensions (WxDxH) 4,1 x 2,8 x 7,2 m height over floor 6,15 m with oil-hydraulic drive, controllable dependent on pressure/time and way, hydraulic drawing cushion in table, hydraulic ram interlocking, two-hand and four-hand operation Nsdpfjv Sva Sjx Amnsct

Year of construction: 1994, condition: ready for operation (used), Two identically constructed heated Ital presses are available. Press length: 1700mm, press width: 1500mm, press height: 1400mm, press force: 800kN, total connection: 30kW, machine dimensions X/Y/Z: approx. 5400mm/2300mm/3200mm. Including piston from above, fittings for chair seats and heating. Documentation available. On-site inspection is possible. Ncodpfx Ameu Rp Hmjnjt

Condition: used, Year of construction: 2018, Pressure 315 t stroke 750 mm distance between columns 1700 mm Distance table/ram, max. stroke up, adjustment up 1250 mm Table surface area 1600 x 1300 mm pressure of drawing cushion in table 125 t Nsdpfx Amjvuuf Ejnoct Die cushion stroke in table 350 mm Die cushion pressure in ram 1000 x 900 t Ram surface 1600 x 1300 mm Side window 1100 mm feed down 400 mm/s feed up 400 mm/s working feed 12 - 44 mm/s oil volume 2500 l power requirement 35,0 kW Weight 43,50 t dimensions of the machine ca. 3,6 x 3,1 x 6,0 mxmxm height over floor 4,9 mm yom 1987 -> 2018: new electric control Siemens S 7 new ligh guard at the front (Sick C 4000) permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, hydraulic drawing cushion in table, cutting impact cushioning, ram interlocking, controllable dependant on pressure/time and way, two-hand operation press can be inspected in running condition in our warehouse

Condition: used, Year of construction: 1961, functionality: fully functional, machine/vehicle number: D08L/7656, Offer Number: D08L/7656 Machinetype: straightening and cutting machine Info: double wire processing Make: BÜNDGENS Type: UD2 Constr. year: 1961 diameter range: 0,8-2 mm cutting length: 1000 mm speed - meters/min: 80 Ncsdpfxowi S H Ie Amnot Location: In our warehouse

Year of construction: 2011, condition: used, functionality: fully functional, Universal Testing Machine Inspekt Table Blue 5 kN Mechanical Design: - 2 backlash-free ball screw spindles, driven by a DC servo motor, Fmax = 10 kN, stiffness 10 kN/mm - 1 test space up to nominal load: - Test space width: 420 mm Ncjdpfx Amsyyu I Nenjt - Max. test stroke without test tools, adapters, and KMZ: 1025 mm Travel Speeds: - Test speed: 0.0015 – 1000 mm/min at full load - Return speed: 1000 mm/min Force Measurement: - Measuring range: 0.8 – 100% of nominal load, Class 1 (optionally Class 0.5) (+/- 1% of the displayed value according to DIN EN ISO 7500-1) - Force measurement resolution: +/-180,000 digits at 20 ms integration time The machine is delivered with a factory test certificate. If factory or DKD calibration at the installation site is requested by the customer, this will incur additional costs. Crosshead Travel Measurement: - Incremental square-wave input with encoder monitoring, saves crosshead position - Crosshead travel resolution: 1 μm Dimensions (W x D x H) / Weight: - Load frame: 685 mm x 550 mm x 1420 mm / 100 kg – controller mounted on the load frame Standard Functions: - Force, displacement, and strain control - Overload protection, automatic force calibration - Specimen break detector, return function - Set-up mode via control panel with display (force, displacement) Data Processing: - USB 2.0 interface or LAN - Data transfer rate to PC: 50 Hz (standard); optionally, higher data acquisition frequency via special software add-on module - Internal data processing rate: 2 ms - Optional: up to 2 free slots for expansion cards (1-channel analog cards or 2-channel digital cards) for additional sensors Power Supply / Operating Conditions: - 115/230 VAC, 0.5 kVA, 50/60 Hz, 5–40°C, 20–80% humidity - Required options for operation: load cell, grips, PC (current standard, OS 8-10-11), test software 5000 N Load Cell - Measuring range: 5–5000 N for tension and compression, with nominal 2 mV/V output signal - Overload protection: +/-100% - Linearity: +/-0.05% - Hysteresis: +/-0.03% - Repeatability: +/-0.02% - Incl. 1.5 m connection cable and calibration certificate Supplied with Extensometer MFX 200 The MFX 200-B extensometer, with its robust construction and high measurement accuracy, is suitable for almost all specimens with an initial gauge length from 10 mm. All strains can be measured, from the modulus of elasticity up to specimen break. It can be used unrestrictedly in both the lower and upper test areas. In combination with the MFQ-A, r- and n-value measurements on sheet metal are also possible. Two different measurement systems are available, differing in their signal and technical specifications (see technical documentation).