Used Form Tester for sale (39,803)

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: MMQ44-5440633#2116, For sale: Mahr form tester in good, fully operational condition. The form tester is ideal for measuring roundness, flatness, concentricity, as well as other form and positional parameters in quality control and metrology labs. There are no more jobs for the machine, which is why it is being sold. Blodpfexy Nnnjx Abbsr ✔ Fully functional ✔ Includes PC & software ✔ Accessories & ergonomic measuring table included ✔ Device can be inspected and tested on site at any time

Condition: used, Chroma Type: ATE 17020 The Chroma 17020 is a highly professional, modular test system for lithium-ion & other battery pack qualification. Particularly strong in: - Lifetime testing, BMS verification, and validation of complex charging cycles - High energy recovery – up to 85% efficiency - Flexible expansion through numerous channels or higher current ranges - Enterprise deployment with extensive safety features & data persistence Technical data – Chroma ATE 17020 PTS Feature Specification Model: Chroma ATE 17020 PTS System type: Regenerative battery pack test system (charge/discharge test) Channel output: 600 W to 60 kW (modular and scalable) Total output: Up to 600 kW (depending on configuration) Voltage range: 20 V / 60 V / 100 V / 200 V / 500 V Current per channel: Depending on module: from a few amps up to >300 A per channel Parallel operation: Yes, for higher current up to 2,600 A Current and voltage accuracy: ±(0.05% of reading + 0.05% of range) Power accuracy: ±0.1% Transition time (charge/discharge): < 50 ms Sampling rate (measured data): up to 50 kHz (with BatteryPro) Data logging: Cyclic, 10 μs – 1 s / memory for 60 min power failure Test modes: CC, CV, CP, CC-CV, DCIR, pulse, drive cycle, dynamic profiles Number of channels: Up to 60 channels (expandable) Bodpfxowwrxae Abbslr Communication: CAN, S-Bus, Ethernet, USB Software: Chroma BatteryPro (test programming, real-time monitoring) Protection functions: OVP, UVP, OCP, UCP, OTP, reverse polarity, wire loss, delta V/I, etc. Energy recovery: Yes – up to 85% energy efficiency, grid-friendly (THD < 5%) Cooling: Fan cooling, low waste heat due to energy recuperation Temperature monitoring: Optionally integrable, range 0–90°C ±2°C Dimensions & weight: Depending on configuration (e.g. 19″ rack, approx. 300 kg) Mains connection: 3-phase, 400 V AC (depending on model) Applications: E-mobility, battery development, quality assurance, cell research Weight: approx. 455 kg Condition: used Scope of delivery: (See picture) (Specifications and technical data are subject to change and errors excepted!) If you have further questions, we are happy to assist you by phone.

Condition: excellent (used), functionality: fully functional, Universal testing machine for material testing / material inspection Testing of tensile strength, bond tensile strength, and shear strength of masonry & wood joints, and similar applications. - Nail pull-out test - Compression test on cement and mortar prisms - Flexural test on cement and mortar samples - Compaction test - Flexural test on wood, concrete - Shear strength test on wood - Splitting tensile strength test on wood - Scaffold connection test - Shear strength test on masonry - Tensile test on masonry Bodpfxsxmv H Rs Abbelr - Tensile test on reinforcing steel - Tensile test on wood - Pull-out test on reinforcing steel - Reverse bending test on reinforcing steel - Dowel pull-out test - Adhesion tensile test I have made a video demonstrating the machine's operation. I can send this video to a mobile number via WhatsApp or Signal!

Condition: good (used), For sale is a rotary table type 800E suitable for a Netstal SynErgy 2000 injection molding machine. Technical data: Travel X-axis: 500 mm Travel Y-axis: 380 mm Travel Z-axis: 400 mm Table design: NC rotary tilting table Rotary/tilt axes: B-axis approx. -10° / +95° C-axis (rotation): 360° Max. workpiece weight: approx. 200 kg Table size: Ø 500 x 380 mm Main spindle: SK 40 (ISO 40) Max. speed: approx. 10,000 rpm Max. tool length: approx. 280 mm Max. tool weight: approx. 6 kg Transport dimensions: 2.45 x 1.76 x 2.38 m Machine data: Machine weight approx. 3,500 kg Total power requirement: approx. 17 kW Transport and loading can be organized throughout Europe on request and for an additional charge. Prices exclude VAT. Inspection possible by appointment. Please contact us—our team looks forward to assisting you. Trade-in or exchange possible! Bedpfx Ajxvz A Nsbbjlr Machinery Purchase / Sales BUYING / SELLING OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or to contact us, please visit our website.

Condition: new, Meat grinder Manufacturer: Ital Form Completely made out of stainless steel Dimensions: 980x605x900mm 320kg/h Voltage: 220V / 50Hz Bjdpsx Dcd Dsfx Abbelr Power: 2.2kW

Condition: good (used), Year of construction: 2019, functionality: fully functional, input voltage: 400 V, track width: 400 mm, FPT Contact Cooker Teflon frying line conveyor oven 400V electric. Model BC 90-4. Year of manufacture 2019 Manufacturer FPT Food Process Technology AB Sweden Belt length Teflon upper belt 160cm. Belt length Teflon lower belt 180cm Frying plate top and bottom dimensions 90cm long 40cm wide Machine workshop tested in good working condition Sale only to traders without guarantee without warranty without return in condition as shown in photo Bjdpevmdbysfx Abbslr

Condition: used, Concrete sample press for concrete and material testing Flexural strength test Bjdpfx Aexb Nv Usbbslr Determination of compressive strength

Condition: new, Meat grinder Manufacturer: Ital Form Bsdpfx Abox Dcdqsbolr Completely made out of stainless steel Voltage: 220V / 50Hz Power: 2.2kW

Condition: like new (used), Meat mincer grinder Completely made of stainless steel Dimensions: 270x430x460 mm Electric power: 1.1 kW Voltage: 220V / 50Hz Bljdpfjxwfulox Abbor Capacity: 220 kg/h

Condition: like new (used), Meat mincer grinder Bjdpfoxwfrksx Abbslr Completely made of stainless steel Dimensions: 460×520×860 mm Electric power: 1.8 kW Voltage: 220V / 50Hz Capacity: 750 kg/h

Condition: like new (used), Meat mincer grinder Bljdsxwfppjpfx Abbjr Completely made of stainless steel Dimensions: 415x705x930mm Electric power:1.8 kW Voltage: 220V/50Hz Capacity: 750 kg/h

Condition: new, Manual slicer for prosciutto and other permanent cured meat products Maximum cutting width 250 mm Maximum product height 180 mm The possibility of adjusting the height of the stand Bjdpju Abb Tofx Abbjlr Hand wheel to blade ratio 1:3

Condition: new, Vacuum filler SL 150 Ital Form Efficient operaton Minimal residue Easy change of products High precision of portioning Compact construction Filling capacity: 4000 kg/h Filling pressure: 35 bar Hopper capacity: 250 liter Portion weight: 1 to 100.000 g Electric power: 7,5 kW Optional accessories: Bledpfx Abewhwnbjbjr Tilting hopper 350 liters - 1610 € Twisting device -8.395 € Holding device - 4830 € Plug for signal socket - 365 € Vacuum pump - 2725 €

Condition: new, Spiral dough mixer Container capacity (capacity): 40 liters Bsdpfsuu Ef Sox Abbslr Spiral mixers are intended for professional use in the field of bakery and catering They are used for the preparation of primary dough, but can also be used for the preparation of other types of products, replacing manual work with a mechanical system In this way, it is possible to produce larger quantities of dough continuously They consist of a bowl for ingredients and a mixing tool (spiral) Specification of Electric Dough Mixer Flour Capacity: 16 kg Bowl Capacity: 40 liter Mixing Speed: 150/200 r/min Bowl Speed: 15/20 r/min Voltage: 220V/380V 50Hz Electric Power: 3 kW Machine Size: 800x480x1000 mm

Condition: new, Vacuum machine, single chamber Efficient vacuum machine of exceptional quality for vacuum packaging of meat, cured meat products, fruits and vegetables Ideal for fast food facilities, hotels, restaurants and other catering facilities Bljdpfx Abjuu H Eyjbor Dimensions: 540 × 490 × 540mm Heaters: 2 x 40 cm Electrical power: 1.5kW Weight: 59 kg

Condition: new, Dough laminator Dimensions: 2550x1000x1280mm Electric power: 0.75kW Voltage: 220V 50Hz Conveyor belt dimensions: 500x1980mm Distance with adjustable roller: 1-45 mm Bledpfx Abeuugcrober Weight: 220kg

Condition: new, Machine type: Standing Dough Sheeter Material: Full Stainless Steel Blodsuug S Tepfx Abbjr Belt size: 630 x 2400 mm Expanded: 3100 x 1100 mm Folded: 760 x 1720 mm Dimensions: 3100 x 1060 x 1100 mm Roller adjustable gap: 1-38 mm Max rolling capacity: 6.5kg/time Electric power: 0.75 kW - 380 V Weight: 260 kg

Condition: new, Type: ST-700 Sealing length: 4 * 620 mm Vacuum pump: 40 m3/h Machine cycle: 20 - 40 sec. Voltage: 380 V, 50 Hz Electric power: 3.3 kW Machine dimension in cm: Width: 145 Lenght: 65 Bljdpfoh Dp Nrex Abber Height: 98 Delivery time: after advanced payment, 1 working day

Condition: new, Dishwasher Ital Form Dimensions: 270x70x170cm Bljdpfx Aogv Tg Ijbbor Capacity: 150 pcs/h Electrical power: 28kW

Condition: used, Two-chamber vacuum machine Bodpfjtv E S Ujx Abbjlr Ital Form Dimensions of the machine: 1845×868×1020mm Chamber dimensions: 880x755x170mm Sealing length: 820mm Number of heaters: 2 Electric power: 3kW Weight: 295kg

Condition: new, Dough rounder Dough rounders are devices that are used to shape the dough They are used in the bakery and confectionery industry They can be banded and spiral The spiral rounder uses a spiral to shape the dough The machine shapes the dough thanks to the aluminum cone and aluminum sleeves around which it spirals The dough that comes from the dough compartment falls into the aluminum inlet groove Bedpfxjuuc Nzs Abbelr All surfaces over which the dough moves are coated with Teflon Thanks to the system with flour and optional blowing of hot or cold air on the grooves, the dough does not stick to the drum Working range: 100 - 800 gr Dimensions: 950 x 950 x 1520 mm Weight: 175kg Electrical power: 1.1kW

Condition: new, General features: Bread dough machine between 65 and 90 liters of water per 100 kg of flour The speed variator allows you to adjust the relative speed between the ranges to get the desired degree of rounding Suitable for pieces from 70g to 2200g Bsdpfxeuuc T To Abbslr Angle between two adjustable bars to adjust the size of the parts to be rounded Flour bowl Height-adjustable Rotating wheels for easy movement It can work with pieces of dough up to 1400g Adjustable rounding time controls the speed of one of the ranges Height-adjustable legs The angle between the two strips can be adjusted by a point A flour sprayer can be installed as an option Technical characteristics: Tape length: standard 1.7m Power: 1.1 kW Voltage: 380V 3N PE Weight: 250 kg

Condition: new, Dough laminator Ital Form Robust construction Large cylinders ensure excellent lamination, as well as reliability and high durability Dimensions of the open machine: 3380x1010x1160mm Dimensions of the closed machine: 1080x1010x2250mm Tape length: 1500mm Electric power: 0.75kW / 1.1kW Voltage: 400V 50Hz Maximum quantity of workable dough: 8kg Machine weight: 250 kg Bljdeuug Emopfx Abbjr

Condition: new, Table dough laminator Ital Form Dimensions: 2350x870x620mm Electrical power: 0.4kW Voltage: 220V 50Hz Distance with adjustable roller: 1-35 mm Bjdpfx Asuuhn Asbbjlr Weight: 150 kg

Condition: new, Table dough laminator Blsdouuh Iiepfx Abbjr Ital Form Dimensions: 2350x910x650mm Conveyor belt size: 500x1980mm Distance with adjustable roller: 1-40 mm Electrical power: 0.55kW Voltage: 380V 50Hz Weight: 130 kg