Used Amplifier for sale (345)

Condition: used, RMS Laedpfxozikc Se Akwoh Technical specifications (manufacturer/model type – no guarantee): Peak force: “according to the manufacturer’s specifications” in the range of approximately 10 kN. Max. acceleration: “up to approximately 1,000 m/s²” Max. speed: “typically in the range of approximately 1 m/s to a few m/s” Components: Control cabinet TGA 022/3 Vibration exciter SW 6507 Power amplifier TG D 9000-000.00 Fan Condition: used Scope of delivery: Vibration testing system as shown in the picture (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: used, RMS RMS vibration exciter with power amplifier and cooling fan Vibration exciter SW 3009 Tightening torque: 21 Nm Insertion depth: 15 mm Power amplifier TGA 6014 3 x 380V / 50Hz / 35A / 23 kVA Condition: used Laodpszdtbmjfx Akwjh Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have over the phone. Written orders can be placed via email or fax.

Condition: used, RMS RMS vibration exciter with power amplifier and cooling fan Vibration exciter SW 1511/2 Power amplifier TGD 3000-000 00 Input: 3x400V-50Hz, 14.5 kVA Lajdpszdry Uofx Akwoh Cooling fan SWG 108 Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: used, LDS Type: SPA56/40K v3 V875 TC LDS shaker with power amplifier and control unit Shaker technical data: Shaker type V 875 Peak force SINUS 35.6 kN (peak) Peak force NOISE 35.6 kN (rms) Peak force SHOCK 106.7 kN Max acceleration SINUS 1078 m/s2 (peak) Max acceleration RANDOM 735.5 m/s2 (rms) Max velocity 1.8 m/s Frequency range excitation direction 0 to 3000 Hz Excitation types horizontal, vertical, arbitrarily pivoted Excitation types: Tests with sinusoidal excitation Tests with noise-based excitation Tests with sinusoidal and noise-based excitation Tests with shock-based excitation (SHOCK): Half-sine shock Sawtooth shock Trapezoidal shock Rectangular shock Simulation or reproduction of a real load profile (Long Time History LTH). A real dynamic time history is used for the test, which was obtained in the test environment. (FFT): Shaker Control Signal Analysis (RANDOM): Random (ROR): Random-on-Random (RSTD): Resonance Search, Track and Dwell (SINEOSC): Sine Oscillator (SOR): Sine-on-Random (SROR): Sine-and-Random-on-Random (SRS): Shock Response Spectrum Synthesis (LTH): Long Time History Data types in signal analysis Possible data types for displaying the TRANSFER FUNCTION [transmibility(f)] Mag dB Mag log Mag Real dB Real Imaginary dB Imaginary Phase UnwrapPhase Real+Imaginery Mag+Phase dB Mag+Phase log Mag+Phase V875 Vibrator 440 mm SPA40K 35.6 kN Dimensions: Approx. 54x90x191cm (amplifier), 115x155x95cm (shaker) Weight: Approx. 650kg (amplifier), 3 tons (shaker) Ljdpfx Aezd Umdskwoah Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: used, RMS Power amplifier / field unit / vibration testing system RMS TGE 10-5/12 + RMS FE3 System package offered exclusively as a source of spare parts / component supply For sale is a used RMS system package for vibration testing systems, consisting of a power amplifier, cooling unit and field unit. The components are sold exclusively as a set. Functionality has not been tested. Technical data, power amplifier: Manufacturer: RMS Regelungs- und Messtechnik Type: TGE 10-5/12 Serial No.: 16606 Year of manufacture: 2014 Input: 3 × 400 V / 50 Hz Power: 45 kVA Cooling unit: Type: SWG 761/9 Serial No.: 16608 Year of manufacture: 2014 Weight: approx. 250 kg Power stages: RMS power module TGE 10-400 Several power modules available in the amplifier cabinet Field unit: Manufacturer: RMS Regelungs- und Messtechnik Type: FE3 Serial No.: 10712 Year of manufacture: 1995 Current display: 0 – 300 A Weight: approx. 600 kg Dimensions and weight: Dimensions amplifier / cooling unit (W × D × H): approx. 1,800 × 800 × 2,000 mm Weight power amplifier: approx. 800 kg Weight cooling unit: approx. 250 kg Weight field unit FE3: approx. 600 kg Total weight: approx. 1,650 kg Equipment: RMS power amplifier TGE 10-5/12 RMS cooling unit SWG 761/9 RMS field unit FE3 RMS power module TGE 10-400 System control panel with touch display Power transformers / chokes Power, control and protection components Cooling system / cooling fan Analog ammeter 0 – 300 A Emergency stop, start button and main switch Connection and supply components as shown in the pictures Application areas: Spare parts sourcing Repair of existing RMS vibration testing systems Supply of spare parts and assemblies Conversion and repair projects Scope of delivery: 1 × RMS TGE 10-5/12 power amplifier 1 × RMS cooling unit SWG 761/9 1 × RMS FE3 field unit Available TGE 10-400 power modules System control panel Connection and supply components as shown in the pictures Lodpfoz Ixu Dex Akwsah Condition: Used Optical condition as shown in the pictures Functionality not tested Sold exclusively as a source of spare parts / component supply. Not offered as a functional machine. No warranty for functionality, operational readiness or completeness. Shipping or freight transport possible. Subject to change, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: used, LDS Type: V895-440 HBT900C with SPA50K amplifier Technical data: Actuator dimensions: 440 mm Sine force vector 55.6 kN (peak) Random force vector 55.6 kN (RMS) Half-sine force vector 166.8 kN (peak) Frequency range 0 to 2100 Hz Sine acceleration max. 981 m/s² Random acceleration max. 490 m/s² Velocity max. 1.6 m/s Displacement ± 63.5 mm Vibration exciter mass 55 kg Max. load 700 kg Amplifier dimensions: W x H x D mm: 537 mm x 1905 mm x 895 mm Weight 622 kg Slip table: Working area: 900 mm x 900 mm Plate thickness: 50 mm Plate weight: 80.4 kg Max. load: 7250 kg Usable frequency range 5-2000 Hz Condition: used Ljdezg Tybepfx Akwjah Total weight (table + shaker): approx. 7000 kg Shaker + table dimensions: L x H x W approx. 2700 x 1500 x 1800 mm Scope of delivery: (See pictures) (Changes and errors in the technical data and specifications are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: used, LDS Type: V875 Shaker System V875-440 with SPA40K amplifier Swing-arm exciter for medium forces Technical data: Head expander: 850 x 850 mm Armature dimensions: 440 mm Sine force vector: 35.6 kN (peak) Random force vector: 35.6 kN (RMS) Shock force vector: 106.75 kN (peak) Frequency range: 5 to 3000 Hz Test specimen mass: max. 600 kg Acceleration: max. 1078.7 m/s² Velocity: max. 1.8 m/s Lodpfxezg Txwj Akweah Condition: used Weight: Shaker: approx. 2200 kg Blower: 181 kg Amplifier: 622 kg Scope of supply: (See pictures) (Subject to changes and errors in the technical data and specifications!) We will be happy to answer any further questions you may have by phone.

Condition: new, Fanuc A06B-6290-H125 servo amplifier, version B, serial number V22452817. New, in opened original packaging, 100% functional. Scope of delivery as shown in the photos. Laedo Adx Icopfx Akweh

Condition: used, LDS Type: V824 + Tira Sliding Table + SPA30K Swing-arm exciter for medium forces Technical data: Sine force vector 26,689 kN (peak) Random force vector 25,355 kN (rms) Half-sine force vector 53,376 kN Mass of moving element 21.55 kg Frequency range DC - 3200 Hz Sine acceleration max. 981 m/s² Random acceleration max. 50 gn rms Velocity max. 1.78 m/s Displacement ± 12.7 mm Sliding table: W x H x D: approx. 1650 mm x 925 mm x 2450 mm Working area: 991 mm * 991 mm Usable frequency range 0 to 2000 Hz Plate thickness: 50 mm Plate weight: 94 kg Max. load: 2200 kg Ljdpfx Akozg Tyhswoah Condition: used Weight: Shaker approx. 1725 kg Sliding table 3500 kg Scope of supply: (See images) Total weight approx. 5300 kg (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Year of construction: 2014, operating hours: 3,100 h, condition: excellent (used), functionality: limited functionality, MYDATA MY500JP Jet Printer 2014 in excellent condition with exceptionally low operating hours (approximately 3,100). Kept and used in a clean environment. Complete system supplied with offline programming PC, MYCAM JP software, 2D Inspection & Repair option, SMT Adhesive option, manual load tables and associated documentation. There are also some spares included which we can bundle into a sale deal for an appropriate price. Visits/Inspection are welcome by appointment. An excellent opportunity to acquire a MY500JP suitable for high-mix, low-to-medium volume SMT production. The machine exhibits an intermittent issue affecting movement on the X-axis during camera positioning. On occasion, a slight jitter or vibration is observed, which can prevent the vision system from reliably locating the PCB fiducial during initial board loading or machine initialisation. The fault is intermittent and does not occur consistently. Most of the time, reloading the PCB allows operation to continue normally. Occasionally, a machine restart is required. The root cause has not been determined, but the issue appears to be associated with the X-axis motion control system. Potential areas for investigation include the servo amplifier (drive), encoder, encoder cable or other associated motion control components. Despite this intermittent behaviour, the machine was used in active production of complex PCB assemblies, including fine-pitch BGA boards, for approximately 12 months prior to being replaced as part of an equipment upgrade. The machine is therefore offered for sale on the understanding that diagnosis and repair of this intermittent fault is outstanding. Included: MYDATA MY500JP (2014) Approx. 3,100 operating hours MYCAM JP offline programming PC and software Laedezlx E Topfx Akweh 2D Inspection and Repair option SMT Adhesive option Manual loading Technical documentation 4pcs AE04 ejectors Bundle of spare parts Not included: Solder paste Cassette (Holding Assembly), Solder paste, Purge Gel, Filter boxes Conveyors

Condition: new, Promess KA-EMF20/150 Servo Press, 20 kN Manufacturer: Promess Type: KA-EMF20/150 Type: Servo press kN: 20 Item condition: New Calibrated: Yes DMS Amplifier: BA 62601 Laedpforgn N Sex Akwsh More new and used servo presses can be found in our shop! International shipping costs available upon request!

Condition: new, Promess Servo Press KA-EMF80 80 KN, New, with DMS Amplifier Manufacturer: Promess Type: KA-EMF80 Type: Servo Press Lsdpfx Aergn Nnskwsah KN: 80 Condition: New Calibrated: Yes DMS Amplifier: BA 624.u2 More servo presses, new and used, can be found in our shop! International shipping costs available upon request!

Condition: ready for operation (used), Fanuc A06B-6093-H102 Servo Amplifier, serial number V17987015, used, in good condition, 100% functional, scope of delivery as shown in the photos. Ledpfo Adx H Ssx Akwsah

Condition: used, LDS + Andreas Schmid Vibration test system with climate chamber LDS V721 + TK 8000/-50/120 4-shaker MIMO system with 8 m³ climate test chamber, -55 °C to +140 °C For sale is a used vibration test system with four LDS V721 shaker exciters and an Andreas Schmid climate test chamber. Technical data, shaker system: Shaker exciters: 4 × LDS V721, air-cooled Amplifier: PA 1000L Controller: imv K2 MIMO (Multi Input Multi Output) Software: imv K2 Excitation types: Sine / Random / Shock / Real-time profiles Frequency range: 5 – 4,000 Hz Velocity: max. 0.7 m/s Displacement amplitude: max. 25.4 mm p-p (1 inch) Acceleration: max. 44 g RMS / 66 g Peak Load capacity: max. 100 kg per shaker Force vector per shaker: 2.9 kN peak sine / 1.9 kN RMS random / 4.6 kN peak shock Mounting area: approx. 1,000 × 1,000 mm Aluminum profile frame The four shakers can be operated synchronously or asynchronously via the MIMO controller. Without the profile frame, mobile use as a modal shaker for large test specimens is possible. Technical data, climate chamber: Manufacturer: Andreas Schmid Anlagentechnik GmbH Type: TK 8 Monoblock, welded Test chamber: 2,000 × 2,000 × 2,000 mm (8 m³) Door: 2,000 × 2,000 mm 2 test chamber windows in the door: 460 × 460 mm Temperature range: -55 °C to +140 °C Temperature stability: ±0.5 K over time Climate range: +10 °C to +95 °C Humidity range: 10 – 95 % RH Refrigerant: R404A / 29 kg Insulation: 140 mm PU, CFC-free, B1 according to DIN 4102 Dimensions and weight: Chamber without base: approx. 2,340 × 3,600 × 2,800 mm Chamber with base: approx. 2,340 × 3,600 × 3,800 mm Unit: approx. 1,200 × 2,400 × 2,200 mm Weight, shaker system: approx. 2,000 kg Weight, climate chamber: approx. 4,500 kg Total weight: approx. 6,500 kg Equipment: 4 × LDS V721 shaker exciters PA 1000L amplifier imv K2 MIMO controller and software 1 × 1 m aluminum profile frame Andreas Schmid 8 m³ climate test chamber Refrigeration unit Accessories as shown in the pictures Laedpfx Akezg Tv Neweh Application areas: Vibration and shock testing Climate and temperature testing Modal analysis Automotive and component testing Research and development Scope of supply: LDS shaker system with amplifier and MIMO control Andreas Schmid climate test chamber with unit Existing accessories as shown in the pictures Condition: Used Optical condition as shown in the pictures Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: used, Bosch DM 4K 7101-D, servo module Amplifier module 1070079646-208 Item condition: Used, in perfect condition R(2)B-7_EK(BOR) Laodpjk Szy Uefx Akweh You can find more modules – new and used – in our shop! International shipping costs available upon request!

Condition: excellent (used), Fanuc AC Servo Amplifier C Series Type A 06B-6066-H 233 Lasdpfxjnnx Hnj Akwjh No.F2X 00227-A22 Weight 6 kg

Condition: good (used), Servo Drive, Servo Card, Input Processor, Control Card, Input Card, Controller, Converter, Controller, Servo Module, Axis Amplifier, Axis Amplifier, Velocity Control Unit, Spindle Amplifier Module, Servo Amplifier -Manufacturer: Bosch, transistor amplifier completely equipped from CNC milling machine Mikron WF 51C/155 -Type: TR15-XA-140-230V Ljdpfxjwd N S De Akwoah -Control cards/single modules: see photos -Dimensions: 480/260/H365 mm -Weight: 24 kg

Condition: refurbished (used), A06B-6117-H105 Servo Amplifier, FANUC, refurbished and tested. Are you interested in this product or would you like more information? Please feel free to contact us. Additional photos are available upon request. The price is negotiable. For more parts and other materials, you can also visit our website, CNC-Service. Lsdpfx Aszi Sv Hjkweah Do you have any questions or are you looking for something specific? Please feel free to contact us!

Condition: good (used), Servo drive, servo card, input processor, control card, input card, control unit, converter, controller, servo module, axis amplifier, velocity control unit, spindle amplifier module, servo amplifier -Manufacturer: Stöber, transistor amplifiers -Type: TAS 1016 -Input: 230 V 50/60 Hz -Output: 0...160V 10.3A -Dimensions: 270/220/55 mm -Weight: 3.4 kg Lodpjzk D Tyjfx Akwoah

Condition: ready for operation (used), Fanuc A06B-6088-H322 # H500 Spindle Amplifier Module Version: B, SN: E4Y0020, used, minor signs of wear, 100% functional, delivery scope as shown in photos. Ljdpfxox Era Tj Akwjah

Condition: ready for operation (used), Fanuc A06B-6088-H322 # H500 Spindle Amplifier SN:EA6X01300, used, normal signs of wear, 100% functional, delivery as per photos. Lajdpfx Aox Erbdokweh

Condition: good (used), Fanuc AC Servo Amplifier (28830 II) C Series Type A06B-6066-H211 A2 Laodpfx Akennx Hcjwjh No.E5 80009

Condition: good (used), Spindle amplifier module, Servo Amplifier Module, CNC Control System, Plug-in card, -Manufacturer: FANUC Lasdpfx Akswrxzwewsh -Type: A06B-6152-H045H580 -Dimensions: 150/380/H290 mm -Weight: 8.2 kg

Condition: like new (used), Year of construction: 2023, Robodrill D21MIB5P/10K/2-W FANUC ROBODRILL D21MIB Plus Version with 2 option slots 24,000 rpm high-speed spindle X-axis travel: 500 mm Extended column +100 mm FANUC CNC control Series 31i-B High-speed CPU CE-compliant version Control panel with touchscreen including touch pen Enabling switch Machine interior with LED lighting Automatic oil lubrication Standard air blow function Telescopic cover for X-axis Z-axis protective cover Spindle head cover Machine enclosure for X500 version 32 A CEE connector Transformer for European version Air distribution system English machine and safety labeling Documentation / operating and spare parts manuals, English CE basic package CE basic package PE connection kit 32-A CEE plug FANUC DDRIB rotary table Integration of a FANUC DDRIB rotary table Additional controlled axis Lajdpfx Ao Adu Ilokwoh Additional axis amplifier 80 A DDRIB connection / plug connection FANUC DDRIB rotary table, 1 unit Cable holder for X500/X700 Integration of the DDRIB including rotary feedthrough FANUC coolant system BASIC, left-hand side, without chip conveyor External cooling (AK) with 5.5 bar Flushing of the work area / chip flushing with 200 l/min Left-hand version Without chip conveyor 3-year-old machine that is completely new but has not been accepted by the end customer from Fanuc in the last 3 years.

Condition: like new (used), Year of construction: 2013, functionality: fully functional, measuring range X-axis: 800 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 700 mm, workpiece weight (max.): 800 kg, warranty duration: 12 months, total height: 2,963 mm, type of input current: AC, total width: 1,700 mm, total length: 2,080 mm, overall weight: 2,275 kg, year of last overhaul: 2026, Equipment: type plate available, Important – Machine sales and service are only available within Germany! We are selling our test and demonstration machine from our Solution Center. Other machines are also available. Please feel free to contact us. Wenzel | L87 with PH10 and SP25 scanning system Refurbished coordinate measuring machine with the latest Renishaw technology. Modernized in 2026. Measuring range XYZ 1200 x 1000 x 600 mm Measuring uncertainty MPE (E0) 2.5 + L/300 in µm Equipment: - Renishaw UCC S3 control, SPA3 servo amplifier, MCU joystick - Active temperature compensation with workpiece sensor - Renishaw PH10 rotary/swivel head with SP25-2 scanning system, including probe changer FCR25-L6 (6 ports) - MODUS measuring software, current version, with CAD import (STEP), including 1 year of software maintenance - PC system with Windows and 2 x 27" TFT monitors, NEW, including a height-adjustable desk - Control cabinet with up-to-date safety technology We will gladly adapt the equipment to your requirements. Please note: The images show the machine with an alternative probe system! Optional service package of your choice: €16,460.00 Free delivery to loading dock | Commissioning | Testing | Accuracy acceptance according to DIN ISO 10360 | Software training in Pliezhausen or Eitorf | Further options and equipment are available upon request. Ljdpfx Aksz Hw Elowoah