Durometer

Bareiss Digitest II

Condition: used, Year of construction: 2021, operating hours: 50 h, functionality: fully functional, machine/vehicle number: Digitest II, DIGI TEST II Modular hardness testing system for fully automatic hardness tests according to Shore, VLRH and IRHD on composite materials, soft-elastic materials, elastomers, plastics and foams with variable testing geometries. Standards • ASTM D2240 • ASTM D1415 • DIN EN ISO 868 • DIN ISO 48-2 • DIN ISO 48-3 • DIN ISO 48-4 • NFT 46-003 • TD 00002001 • TD 00002002 • Measurement method • Shore A • Shore A0 • Shore D • Shore 0 • Shore 00 • Shore 000 • Shore 000S • Shore E • Shore B • Shore C • Shore D0 • Micro Shore A • Micro Shore D • Shore AM • Shore M • IRHD L • IRHD N • IRHD M • IRHD H • VLRH Application areas Flat, inclined, convex and concave geometries of composite materials, soft-elastic materials, elastomers, plastics and foams. The digi test II enables precise and user-independent hardness measurements on elastomers, polymers, soft-elastic materials, composite materials and foams. The modularly expandable measuring system is used in research and development as well as in production and quality control to determine the material hardness of a broad product portfolio and to ensure quality standards. Modularly expandable Interchangeable measuring devices enable a simple change between the numerous measurement methods in the areas of Shore, IRHD and VLRH without tools and with only a few steps. Thanks to the wide range of positioning and measuring devices offered, the digi test II is the right choice for laboratory, production, quality assurance and development when testing a broad product portfolio. Many shapes – one solution Thanks to its modular expandability, the digi test II enables the measurement of all sample geometries. Whether you want to perform measurements on flat, inclined, concave or convex geometries, you will receive exact measurement values from a sample thickness of 0.7 mm thanks to the approach system. ROTOFIX FOR DIGI-TEST II Positioning device available as an accessory for the automatic measurement of a different number of samples and measuring positions. Secure measurement results without user influence Lhodpfx Apjzn Na Tsmji In addition to perfect alignment as a table unit, the Digi-Test II ensures the optimal measuring position of the test samples thanks to its numerous positioning devices. The most accurate measurements without user influence and manual pre-setting are guaranteed, which gives you time for the important things. Comprehensive analysis through various measurement methods Do not only measure the hardness of your test specimen, but also the flow curve of the material during the test. With the option for hysteresis measurements, the Digi-Test II provides additional insights into the characteristic properties of the material. CENTROFIX Manually operated positioning device available as an accessory for the measurement of individual test specimens for the digi test II and the Gelomat. Modular attachments on the Centrofix allow samples and molded parts of any type to be clamped and fixed for measurement.

Condition: used, Year of construction: 2021, operating hours: 25 h, functionality: fully functional, DIGI TEST II Modular hardness testing system for fully automatic hardness tests according to Shore, VLRH and IRHD on composite materials, soft-elastic materials, elastomers, plastics and foams with variable testing geometries. Standards • ASTM D2240 • ASTM D1415 • DIN EN ISO 868 • DIN ISO 48-2 • DIN ISO 48-3 • DIN ISO 48-4 • NFT 46-003 • TD 00002001 • TD 00002002 • Measurement method • Shore A • Shore A0 • Shore D • Shore 0 • Shore 00 • Shore 000 • Shore 000S • Shore E • Shore B • Shore C • Shore D0 • Micro Shore A • Micro Shore D • Shore AM • Shore M • IRHD L • IRHD N • IRHD M • IRHD H • VLRH Application areas Flat, inclined, convex and concave geometries of composite materials, soft-elastic materials, elastomers, plastics and foams. The digi test II enables precise and user-independent hardness measurements on elastomers, polymers, soft-elastic materials, composite materials and foams. The modularly expandable measuring system is used in research and development as well as in production and quality control to determine the material hardness of a broad product portfolio and to ensure quality standards. Modularly expandable Interchangeable measuring devices enable a simple change between the numerous measurement methods in the areas of Shore, IRHD and VLRH without tools and with only a few steps. Thanks to the wide range of positioning and measuring devices offered, the digi test II is the right choice for laboratory, production, quality assurance and development when testing a broad product portfolio. Many shapes – one solution Thanks to its modular expandability, the digi test II enables the measurement of all sample geometries. Whether you want to perform measurements on flat, inclined, concave or convex geometries, you will receive exact measurement values from a sample thickness of 0.7 mm thanks to the approach system. ROTOFIX FOR DIGI-TEST II Positioning device available as an accessory for the automatic measurement of a different number of samples and measuring positions. Secure measurement results without user influence In addition to perfect alignment as a table unit, the Digi-Test II ensures the optimal measuring position of the test samples thanks to its numerous positioning devices. The most accurate measurements without user influence and manual pre-setting are guaranteed, which gives you time for the important things. Comprehensive analysis through various measurement methods Do not only measure the hardness of your test specimen, but also the flow curve of the material during the test. With the option for hysteresis measurements, the Digi-Test II provides additional insights into the characteristic properties of the material. CENTROFIX Manually operated positioning device available as an accessory for the measurement of individual test specimens for the digi test II and the Gelomat. Modular attachments on the Centrofix allow samples and molded parts of any type to be clamped and fixed for measurement. Lhsdszn I Ucepfx Apmei

Condition: used, Year of construction: 2023, operating hours: 30 h, functionality: fully functional, machine/vehicle number: Digitest II, DIGI TEST II Modular hardness testing system for fully automatic hardness tests according to Shore, VLRH, and IRHD on composite materials, soft-elastic materials, elastomers, plastics, and foams with variable test geometries. Standards: • ASTM D2240 • ASTM D1415 • DIN EN ISO 868 • DIN ISO 48-2 • DIN ISO 48-3 • DIN ISO 48-4 • NFT 46-003 • TD 00002001 • TD 00002002 • Measurement methods: • Shore A • Shore A0 • Shore D • Shore 0 • Shore 00 • Shore 000 • Shore 000S • Shore E • Shore B • Shore C • Shore D0 • Micro Shore A • Micro Shore D • Shore AM • Shore M • IRHD L • IRHD N • IRHD M • IRHD H • VLRH Application areas Flat, inclined, convex, and concave geometries of composite materials, soft-elastic materials, elastomers, plastics, and foams. The digi test II enables precise and user-independent hardness measurements on elastomers, polymers, soft-elastic materials, composite materials, and foams. This modularly expandable measuring system is used in research and development as well as in production and quality control to determine the material hardness of a broad product portfolio and to ensure quality standards. Modularly expandable Interchangeable measuring devices allow for easy switching between the numerous measurement methods in the areas of Shore, IRHD, and VLRH without tools and with only a few steps. Due to the wide range of positioning and measuring devices offered, the digi test II is the right choice for the laboratory, production, quality assurance, and development when testing a broad product portfolio. Many shapes – one solution The modular expandability of the digi test II enables the measurement of all sample geometries. Whether you want to perform measurements on flat, inclined, concave, or convex geometries, you will obtain exact measurement values from a sample thickness of 0.7 mm thanks to the approach system. ROTOFIX FOR DIGI-TEST II Lsdpfx Apezn I Tfsmohi Positioning device available as an accessory for the automatic measurement of a different number of samples and measuring positions. Secure measurement results without user influence In addition to perfect alignment as a table unit, the Digi-Test II ensures the optimal measuring position of the test samples through its numerous positioning devices. The most accurate measurements without user influence and manual pre-setting are guaranteed, which saves you time for the important things. Comprehensive analysis through various measurement methods Do not just measure the hardness of your test specimen, but also the flow curve of the material during the test. With the option for hysteresis measurements, the Digi-Test II provides additional insights into the characteristic properties of the material. CENTROFIX Manually adjustable positioning device, available as an accessory for measuring individual test specimens for the digi test II as well as the Gelomat. Modular attachments on the Centrofix allow samples and molded parts of all kinds to be clamped and fixed for measurement.

Condition: excellent (used), functionality: fully functional, A Bareiss digital hardness tester in good, used condition is for sale, as shown in the pictures. Lhsdpfx Apjyfmm Tomji Technical data: • Manufacturer: Bareiss Prüfgerätebau GmbH • Model: Digi-Test II • Hardness testing method: Shore A - D - IRHD M • The modular digi test II offers you maximum flexibility in hardness testing of elastomers, polymers, soft elastic materials, composite materials, and foams. In just a few simple steps and without tools, the numerous measuring devices can be exchanged according to Shore, VLRH, or IRHD, allowing you to quickly switch between different measuring methods. The hardness measurements are fully automatic, reducing user influence to a minimum. A connected electronic unit recognizes the selected measuring device, automatically switches to the appropriate measuring method, and guides you through the test sequence via the user-friendly menu. • With many accessories, operating instructions, drivers • Condition: Used, functional Insured shipping costs: €30 You will receive an invoice with VAT shown separately. Viewing/collection is possible by arrangement in 42855 Remscheid. Sale from location 42855 Remscheid, free loading. Subject to errors in technical data and prior sale. Storage location: Shelf 1