Used durometer / material testing for sale (36)

Condition: excellent (used), Zwick Type: BZ2.5/TN1S Zwick table-top testing machine, tensile strength testing machine Application area: Wide range of applications, from testing plastics and elastomers to testing paper, textiles, foam, and wire, as well as component testing. Load frame: Max. test force FN in tension/compression: 2.5 kN Kdsdjzdry Iepfx Anwjn Height (h1) approx. 770 mm Width with electronics unit: 320 mm Depth with electronics unit: 414 mm Height of the working area h min ... h max: Travel carriage angle mounted upwards: 227 ... 573 mm Travel carriage angle mounted rotated by 180°: 57 ... 403 mm (each without connecting bolt) Connection values: Electrical connection: 115/230 V 4/2A-1PH/PE/N Power consumption: 0.4 kVA Mains frequency: 50/60 Hz 2.5 kN Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: good (used), Zwick Type: BZ1.0 / TH1S Zwick table-top testing machines Zwick with a maximum force of 1.0 kN. Stroke length: 1150 mm. Testing speed: 0.1 ... 1800 mm/min Scope of delivery: (See images) (Subject to changes and errors in the technical data and specifications!) Kdjdpfx Anszdryzswjn We would be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Impact hardness tester Type according to Professor Baumann Type: No.523 Operating instructions available Box has the dimensions : L.380 x W.220 x H. 95 mm Weight 5.5, kg Kdodpfxod R Rhwo Anwjn

Condition: used, Year of construction: 2007, voltage 400 V current capacity 800 VA frequency 50 Hz weight of the machine ca. ca. 355 kg In our opinion, the machine is in good used condition and can be viewed Kodpfsxwdxcox Anwjdn under power by appointment. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well Subject to prior sale!

Condition: good (used), Year of construction: 2012, ITW BÜHLER WILSON HARDNESS TESTER Kodpfoxnpvzjx Anwedn SuperRockwell Hardness Testing Device BRIRO RK-Automatic Year of manufacture: 2012 Test height: 0-235 mm Throat depth: 145 mm with HM-Control evaluation system with RS-232 data interface for data transfer with settings for HR15N; HR30N; HR45N; HR15T; HR30T; HR45T used Weight: 150 kg

Year of construction: 1990, condition: good (used), Hardness tester, hardness tester, material testing machine make FRANK type 38533 Serial number 17024 year of construction ca.1990 test chamber height 220 mm Kdjdpfx Aen Snkksnwsn projection 150 mm

Condition: used, functionality: unexamined, Test height 320 mm Kodpfxouihh Rj Anwodn Projection 150 mm

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: PM3, Universal testing machine PM3 (2026) Force: 3 kN Crosshead travel: 520 mm Working space depth: 66 mm Overall height: 1036 mm Weight: approx. 40 kg Displacement resolution: 0.01 mm Testing speed: 1-500 mm/min Cc7d2rmq Return speed: 700 mm/min Load cell: 3 kN Includes evaluation electronics and basic software. Ksdpoyc U Dbjfx Anwodn Our testing machines can be operated in stand-alone mode via a numeric keypad, allowing for a “quick test” even without a PC. For tests that require data storage and recording of the curve profile, we offer the option to control and evaluate the tests using the basic software. This allows you to generate various test sequences and create a test report. Furthermore, you have the option to process the raw data in your own programs. Optional: - Delivery and commissioning - DAkkS or factory calibration according to DIN EN ISO 7500-1 - Clamping devices: Pressure plates, bending fixtures, shear fixtures, wedge clamps, scissor clamps, peeling clamps, screw clamps, pneumatic clamps, and hydraulic clamps.

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, Universal testing machine PM3 Force: 3 kN cross beam stroke: 520 mm Working area depth: 66 mm total height: 1036 mm Weight: ca.40 Kg Kjdpofdzupsfx Anwedn Travel resolution: 0.01 mm testing speed: 1-500 mm / min Cc7d2rmq Return speed: 700 mm / min Force transducer: 3 kN incl. evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode via a numeric keyboard, so that a "quick test" can be carried out without a PC. For tests that require data storage and recording of the curve progression, we offer you the possibility of control and evaluation with the basic software. This allows to generate different test sequences and to create a test protocol. Furthermore, you have the possibility to process the raw data in your own programs. Optional: - Delivery & commissioning - DAkkS or factory calibration according to DIN EN ISO 7500-1 - Clamps: Pressure plates, bending devices, shearing devices, wedge clamps, shear clamps, peeling clamps, screw clamps, pneumatic clamps and hydraulic clamps.

Condition: excellent (used), Year of construction: 2006, Wolpert 930, year of manufacture 2006 Kjdpfx Asx N Ry Honwjdn

Condition: excellent (used), Wolpert DIA TESTOR 7521 Kdodpfxox N Rw Ee Anwon

Condition: excellent (used), Year of construction: 1975, For sale - Hardness tester Wolpert Testor HT2001, year of manufacture 1975 Kdsdpfxex N Rvnj Anwsn

Condition: used, brinell hardness:260 mm rockwell hardness:220 mm throat:150 mm micro head enlargement:70-fach :187,5 kg Kodpscxxzasfx Anwjdn checking height:max. 250 mm weight of the machine ca.:0,25 t dimensions of the machine ca.:0,3 x 0,55 x 1,02 m semi-automatic machine for serial and single tests according to Vickers and Brunell, with projection-measuring unit on machine head, electronic load-time adjustment, shock-resistant loading via angled suspension, very good condition

Condition: used, Year of construction: 1971, brinell hardness 250 kg rockwell hardness 150 kg throat 125 mm checking height 200 mm weight of the machine ca. 0,07 t Ksdpsy Sih Uefx Anwedn dimensions of the machine ca. 650 x 530 x 1550 m Tests possible by system Rockwell, Vickers, Brinell. This device is a used one. Therefore we sell it without warranty.

Condition: used, Lead pressure measuring device Make Tesa Kodpfjcrp Srox Anwjdn Type TF WZ 1 No.20 in wooden case

Condition: excellent (used), For sale: Professional automatic Vickers hardness tester Mitutoyo HV-100, made in Japan, in excellent technical and visual condition. The device is equipped with the AUTOVICK automatic measurement system and the Mitutoyo Vision Unit, enabling fast, repeatable and fully automatic hardness measurements without operator subjectivity. Intended for measurement laboratories, quality control departments, manufacturing plants, automotive, aerospace, and toolmaking sectors. —— Kdodpeyc H I Sefx Anwsn Key information • Measurement method: Vickers (HV) • Model: HV-100 (series HV-100B / HV-100C / 100D) • Load range: up to 100 kgf • Automatic AUTOVICK system • Integrated Mitutoyo Vision Unit • Automatic impression recognition and HV calculation • Made in Japan • Power supply: 230 V • Stable, heavy-duty laboratory construction —— Technical condition • Device operational and complete • Very good visual condition • Regularly used in an industrial environment • Last technical inspection: 2020 • Ready for immediate operation after connection —— Included in the set • Mitutoyo HV-100 hardness tester • Vision Unit (measuring camera) • AUTOVICK automatic system • Set of weights • Original accessories and holders • Transport cases with equipment • Original Mitutoyo documentation and manuals • Weight: 65 kg

Condition: good (used), Manufacturer: WMW WPM Material Testing Machines Leipzig Year of manufacture: Model: Kdodpfx Ajy Hka Usnwjn Test method: Table diameter: 200 mm Support diameter: 100 mm Throat depth: mm Test height: 300 mm Spindle diameter: 50 mm Test force: 15.5 to 250 kg Accessories: Weight: 130 kg Footprint: 500 x 200 mm Dimensions: 500 x 300 x 730 mm Condition: good

Condition: excellent (used), Year of construction: 1975, Breaking device . bar material dia. 10 - 45 mm bar material stranggepreßte NE-Stangen weight of the machine ca. 3 t Bending and breaking device simple and sturdy device to detect internal flaws in extruded non-ferrous metal rods +++++ Please note: Kdedpeit Ev Tofx Anwon The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: excellent (used), Zwick Type: BT1-FR050TH.A1K 50 kN Universal Testing Machine Zwick/Roell BT1-FR050TH.A1K Material Testing Machine – Precise Strain Gauge Testing Note: PC not included!! Highlights: - Test force: 50 kN (tension/compression) - High-precision TC-MODCSCC module for strain gauge load cells (4- & 6-wire) - Measuring range: 0.2 – 165% of nominal value, data acquisition up to 500 Hz - Maximum resolution: up to 297,000 points (at 50 Hz) - Positioning repeatability: ±10 µm - Crosshead speed: 0.0005 – 600 mm/min Kdsdpew S Hvzofx Anwsn - Robust construction - Compact dimensions: 1,814–2,688 mm height, 936 mm width, 722 mm depth - Low noise: 59 dB(A) - Ambient conditions: +10 to +35 °C, humidity 20–90% Special features: - Ideal for research, development, or industrial material testing Dimensions & weight: Load frame: - Test force (tension/compression): 50 kN - Load frame height: 1,714 mm - Overall height: 1,814 – 2,688 mm - Load frame width: 760 mm - Overall width: 936 mm - Load frame depth: 477 mm - Overall depth: 722 mm Weight: - With electronic unit: 230 kg - With typical accessories: approx. 300 kg Condition: used Scope of delivery: (see picture) - ZwickRoell BT1-FR050TH.A1K testing machine - Operating manual (Specifications are subject to change and errors excepted!) If you have any questions, we are happy to answer them by phone.

Condition: used, Hardness tester, hardness measuring machine, hardness tester, hardness tester, impact hardness tester, hardness comparison plate, test block, calibration and adjustment plate -Manufacturer: SiB, hardness reference block test block -Type: 199HBW 5/750 -Dimension box: 180/170/H35 mm Kjdsk Egkwjpfx Anwodn -Weight: 1.4 kg

Condition: used, Hardness tester, hardness measuring machine, hardness tester, impact hardness tester -Handover: in its current condition as inspected -Tool set: incomplete -Hahn & Kolb: mobile hardness testing device -Individual components: see photos Kjdpshck U Sofx Anwjdn -Box dimensions: 355/190/H95 mm -Weight: 5.4 kg

Condition: used, Hardness testing device, hardness measuring machine, hardness tester, hardness tester -Hardness tester: according to Brinell and Rockwell Accessories are missing and therefore it is sold as defective. Kodpfxsb A Rkvo Anwedn -Handover in its current condition as inspected -Dimensions: 600/220/H660 mm -Weight: 92 kg

Condition: good (used), Year of construction: 1978, hardness tester, hardness measuring machine, hardness tester, hardness tester, universal hardness testing machine Kdsdpfx Asu Ha U Tsnwon -Manufacturer: Reicherter, hardness tester according to Brinell/Vickers and Rockwell on solid base -Type: Briviskop BVR 187.5 H -Projection: 250 mm -Test height: 280 mm -Accessories: see photos -Total dimensions: 1200/700/H1730 mm -Weight: 256 kg

Condition: used, Year of construction: 1962, rockwell hardness . brinell hardness . Hardness tester Rockwell measurement with underframe table all technical data without guarantee Kdsdpfxjwugq Se Anwsn

Condition: good (used), Year of construction: 1984, Tiede Universal U550 GW Magnetic Electric Crack Tester Manufacturer: Tiede GmbH Type: U550 GW Type: Magnetic-electric crack tester Rated operating current I 5400 A alternating current seats resp. 3800 A alternating current effective, adjustable in 8 steps Flow rate Ø: 8000 Aw full wave direct current. Adjustable in 8 steps, measured according to DIN 54 131 Mobile magnetizing coil lights Ø 800 Feedthrough Ø: 5000 Aw with alternating current adjustable in 8 steps, gemsen according to DIN 54131 Year of construction 1984 Accessories/Special equipment Electronic magnetization controls Demagnetization device Support rollers Darkening cabin Main machine dimensions total length mm 8.000 total width mm 2.500 Total height mm 2.500 Working area remarks Nominal diameter mm ~5.500 Field of application: testing of crankshafts. Item condition: used Kjdpfx Ajifpg Aonwjdn For further technical data please refer to the machine card. Financing through our bank is also possible. komplett-konzept.leasingo.de Find more items – new and used – in our shop! International shipping costs on request!