Used Oil Extractor for sale (7,010)

Condition: good (used), Standard radiator, car radiator, oil cooler, heat exchanger -Oil cooler: Heat exchanger, without fan -Type: unfortunately no type designation Dksdpfozk Etbjx Acnsr -Pressure: max. 20 bar -Temperature: max. 120 °C -Dimensions: 270/130/H260 mm -Weight: 4.4 kg

Condition: good (used), 1 x Lavamac washer extractor. Model LH1200 Year 2009. Dkjdpfx Aozfkpkjcnor

Condition: reconditioned (used), WOERNER or BOSCH lubricating oil pumps with 8 to 14 pump elements and oscillating drive, oil delivery rate individually adjustable for each pump element Dodpfexl Aauox Acnekr

Condition: used, Year of construction: 2022, Design of intake nozzle: left Diameter of intake nozzle: 200 mm Nominal volume flow: 2260 m³/h Maximum volume flow: 3400 m³/h Filter area: 12 m² Cleaning: vibrating motor Chip disposal: 2 collection containers Collection volume: 350 liters Filter material: polyester needle felt Negative pressure at nominal volume flow: 3500 Pa Dkjdezqvcgepfx Acnsr Negative pressure at maximum volume flow: 2700 Pa Installation: mobile Weight approx.: 410 kg Motor power: 4 kW Power connection approx.: 400 Volt/50 Hz Location: Rieth

Condition: good (used), Year of construction: 2015, Atlas Copco Oil Free Screw Compressor with built-in Air Dryer Model SF2+FF 7.75 bar / 112 PSI Year 2015 400 volts three phase, 2.2 KW / 3 HP, 2885 RPM 8.9 CFM / 4.21 lts/s Dsdpfey Iplfex Acnjkr Very little use Ex Pharma Facility

Condition: like new (used), Year of construction: 2018, functionality: unexamined, machine/vehicle number: 1809108209, input frequency: 50 Hz, 2x Kracht lubrication oil unit for sale Djdpfxswzu T Io Acnjkr

Condition: as good as new (ex-display), Year of construction: 2022, pressing force: 400 t, Press design double column press Thermally neutral 80 - 120 °C Number of operating sides 1 side Forces Pressing force max. 4000 kN Free ripping force max. 400 kN Pressure build-up time Closed die steel to steel Max. 4 sec. Dimensions 3,800 mm long and 4,475 mm wide Max. Opening width 800 mm Stroke 800 mm Table height above floor 1100 mm Height above floor (headroom) approx. 4300 mm Hall height min. 5500 mm parallel deviation at 20°C +/- 0,1 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.2 mm/m Weight Total weight of press without operating materials and table plate approx. 28 t Press table Table size 1500x1500 mm Speeds Fast closing with 100 mm sec. Pressing speed 8 - 3 mm sec. Dkedpsph Uk Nofx Acnjr Sound pressure Sound pressure level, measured at 1.5m height at the control panel according to DIN 45635-T16-KL3 max. 78 db(A) Hydraulics Number of pressing cylinders/driving cylinders 1 pc. Operating pressure max. 300 bar Pressing pressure build-up time 4 sec. Pressure accuracy during pressing stroke +/- 3 bar Main pump BOSCHREXROTH axial piston pump approx. 145 L/min Oil volume approx. HLP 46 MW 1000 liters Ambient temperature max. 40 °C Oil temperature max. 55 °C Flow temperature °C Auxiliary pump BOSCHREXROTH, gear pump 10 L/min Pressure stabilization for up to 300 sec. Electrical system Main supply 400 V AC Control voltage 24 V DC Frequency 50 Hz Connection hydraulics main motor 40 kW Sliding table press with 400 T capacity, Closing speed up to 100 mm/ ( adjustable via touch screen ) Opening speed up to 100 mm/sec ( adjustable via touch screen ) Starting press speed 10 mm/sec ( adjustable via touch screen ) table top size 1500x1500mm ram size approx. 1600x1500mm Oil temperature monitoring 55 degree warning, 60 degree shutdown Automatic lubrication ( adjustable via touch screen ) Free positioning of the ram ( adjustable via touch screen ) SICK/PILZ light barriers 14 mm, front, up to 1800 mm height Hydraulic and mechanical ram protection Circuit oil cooling ( adjustable via touch screen ) Ejector in table, 20 T press force, 350mm travel Ejector moves outwards with the table Table plate milled flat, with DIN 22 T grooves Pressure adjustment from 60 T to 400 T ( adjustable via touch screen ) Travel limitation either by pressure or position Set-up mode, single stroke and cycle sequence ( adjustable via touch screen ) Swiveling control panel on the cabinet Two-hand operation, with opening button, manual/single stroke/cycle switchover button Installation, commissioning, instruction against separate charge The control is supplied by SIEMENS. ( S 7 1200 ) Also the touch screen monitor with 9 inch. The remote maintenance unit SECOMEA -Ethernet is included in the delivery. The side of the press has two 1000 mm high and 800 mm wide windows with double doors. (sliding table press, hydraulic press, hydraulic press, double column press)

Condition: new, Year of construction: 2022, pressing force: 15 t, Single column press with 15 T capacity suitable for continuous shift operation a) travel speed 10 mm/sec. downwards, b) opening speed up to 25 mm/sec c) starting pressing speed 10 mm/sec d) table size 400x400 mm e) ram size 200x200 mm, with T grooves and central cylinder clamping f) Overall size approx. 1150x800x1750 mm g) oil temperature display on oil tank h) pressure adjustment from 5 T to 17 T ( adjustable by rotary control ) i) Hand lever operation with two speeds j) Machine body powder-coated, or double-painted k) Control cabinet supply line from above with 3000 mm cable and 16 Ampere plug l) assembly, commissioning, instruction against separate calculation Press design Single column press Thermally neutral 80 - 120 °C Number of operating sides 1 side Forces Press force max. ( at 250 bar ) 150 kN Free ripping force max. 10 kN Pressure build-up time Closed die Steel to steel Max. 2 sec. Max. Opening width 400 mm Stroke and min. opening 350 mm Table height above floor 850 mm Height above floor (headroom) approx. 1900 mm Hall height min. 2.500 mm Parallel deviation at 20°C +/- 0.1 mm Determined at max. clamping force with 70% occupancy < = 0.3 mm/m Weight Total weight of the press without operating materials approx. 1.1 to Fast closing with 10 mm sec. Dedpfeitylgjx Acnskr Press speed 10 - 0 mm sec. Sound pressure level, measured at 1.5m height at the control panel according to DIN 45635-T16-KL3 max. 78 db(A) Number of pressing cylinders 1 pc. Operating pressure max. 290 bar Pressing pressure build-up time . 2 sec. Pressure accuracy during pressing stroke +/- 5 bar Main pump Gear pump approx. 9 L/min Oil volume approx. HLP 46 MW 80 liters Ambient temperature max. 40 °C Oil temperature max. 55 °C Flow temperature °C Electrical system 400 V AC Main supply Control voltage 24 V DC Hydraulic pumps 24 V DC Frequency 50 Hz Hydraulic connection Main motor 3 kW Total connection Approx. 5 kW Equipment control cabinet Protection class IP 54 Reserve space Approx. 20 Cooling no Interior lighting no Operating mode switch Lockable yes

Year of construction: 2023, condition: as good as new (ex-display), Exhibit, immediately available: new RENNER SCROLL SL-I 4.5 (10 bar) oil-free compressor with RENNERtronic Touch control with star-delta Djdpjlnlrzefx Acnskr Year of construction: 2023 Operating hours: 1 hr The compressor is in stock and available immediately Pressure: 10 bars Rated power: 4.50 kW Delivery quantity: 405 l/min Sound level: 68 dB(A) Compressed air outlet: 1/2" Dimensions length x width x height: 760 x 550 x 920 mm Weight: 181 kg Visit our store. We always have a wide range of new and used compressors in stock! Immediately available.

Condition: as good as new (ex-display), Year of construction: 2025, machine/vehicle number: 340590, new RENNER SCROLL SL-NEO 7.5 I (8 bar) oil-free compressor Year of construction: 2025 Operating hours: 1 hr Pressure: 8 bars Rated power: 7.50 kW Delivery quantity: 890 l/min Sound level: 69 dB(A) Compressed air outlet: 1/2" Dimensions length x width x height: 835 x 595 x 935 mm Dkedpfxov Al Nqs Acnsr Weight: 195 kg Visit our store. We always have a wide range of new and used compressors in stock! Immediately available.

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 6214330001, overall weight: 89 kg, total height: 950 mm, power: 2.2 kW (2.99 HP), pressure (max.): 8 bar, noise level: 60 dB, new oil-free DENTAL piston compressor Dr Sonic 320-50-W-ES with attached double column adsorption dryer with sound insulation box and additional fan Oil-free piston compressor, two-cylinder, single-stage, max pressure 8 bar, built on 50 lt. internally coated tank with attached adsorption dryer. Ideal for 3 dental chairs – minimal space requirement due to compact design. Dkodpfevlw Hajx Acnsr Specifications: Type : Dr. SONIC 320-50-W-ES-3M Operating overpressure max : 8 bar Suction capacity : 320 l/min Effective delivery rate at 6 bar*) : 210 l/min Number of steps : 1 Number of cylinders : 2 Compressor speed : 1400 1/min Nominal power drive motor : 2,2 Motor protection class / insulation class : IP 54 / F Operating voltage / frequency : 230 /50 V/Hz Sound pressure level (DIN 45635 T13) : 60 dB(A) Tank volume : 50 litres Width : 700 mm Depth : 500 mm Height : 980 mm Weight : 89 kg Compressed air connection : G 3/8

Condition: new, Year of construction: 2025, operating hours: 2 h, machine/vehicle number: LENTO 55WK, New Speed-controlled, oil free, water injected screw compressor ALMIG LENTO 55 LK Year of construction: 2025 Dksdpfx Ajc Rt D Nscnsr technical spezifications: Type: LENTO 55 WK Possible operating pressures of the system(continuously adjustable): 5 - 12 bar Delivery rate at minimum/maximum speed, measured according to ISO 1217 Annex C: at 5 bar min/max: 1.41 / 7.79 m³/min at 6 bar min/max: 1.40 / 7.74 m³/min at 7 bar min/max: 1.39 / 7.69 m³/min at 8 bar min/max: 1.38 / 7.64 m³/min at 9 bar min/max: 1.37 / 7.59 m³/min at 10 bar min/max: 1.35 / 7.29 m³/min at 11 bar min/max: 1.34 / 6.97 m³/min at 12 bar min/max: 1.33 / 6.71 m³/min Rated power of drive motor: 55 kW Protection / insulation class of drive motor: IE 3Protection / insulation class of fan motor: IP 54 / H Operating voltage / frequency at min. / max. speed: 380 / 41/200 V/Hz Residual oil content: 0 mg/m³ Cooling water requirement at 100% load( at inlet +15° / delta t = 15 K ): 55 l/min Cooling water outlet (max): 45 °C Cooling water pressure (min / max): 2 / 10 bar Cooling water quantity (min / max): 140 l/min Cooling water quality according to the valid "ALMiG cooling water conditions" Pressure dew point of refrigerant dryer at 50% load: 3 °C 100% load: 3 °C Sound pressure level (DIN 45635 T.13) soundproofed, at 50% load: 75.6 dB(A) 100% load: 78.2 dB(A) Length: 2,300 mm Width: 1,400 mm Height: 1,580 mm Weight: 1,690 kg Compressed air connection: G 1 1/2 inch Visit our shop, we always have a large number of new and used compressors in stock.

Condition: used, Year of construction: 1998, OVERVIEW This ABC 4HA-4-LT high-pressure reciprocating air compressor, manufactured in 1998, is designed for the supply of compressed air in PET bottle blowing applications. The compressor is manufactured by ABC – Arizaga, Bastarrica y Cía S.A. from Eibar, Spain. The machine is a 4-stage reciprocating compressor with oil-free cylinder compression design and a nominal pressure of 42 bar. It is belt-driven. The compressor is mounted on a structural steel skid and includes interstage piping, pressure monitoring, cooling water connections, main drive motor, belt-drive safety guard and integrated control cabinet. The machine is equipped with an analog pressure gauge panel showing the final stage, intermediate stages and oil pressure. The control cabinet is fitted with status lamps for temperature, water, oil, thermal relay and dryer fault indications, as well as an hour meter and emergency stop.   Dodpeziawrjfx Acnekr TECHNICAL DATA - Manufacturer: ABC – Arizaga, Bastarrica y Cía S.A. - Manufacturer Location: Eibar, Spain - Model / Type: 4HA-4-LT - Machine Type: High-pressure reciprocating air compressor - Year of Manufacture: 1998 - Application: High-pressure compressed air supply for PET bottle blowing - Compression Design: Oil-free cylinder compression - Number of Compression Stages: 4 stages - Nominal Pressure: 42 bar - Regulation Air Pressure: 8 bar - Suction Pressure: Not specified - Flow Rate: approx. 546.9 m³/h - Compressor Speed: 725 rpm - Motor Power: 150 CV / 110 kW - Total Power to Install: 158 HP / 115 kW - Transmission: Belt-driven - Power Voltage: 380 V - Control Voltage: 220 V - Frequency: 50 Hz - Cylinder Diameter, 1st Stage: 250 mm - Cylinder Diameter, 2nd Stage: 160 mm - Cylinder Diameter, 3rd Stage: 105 mm - Cylinder Diameter, 4th Stage: 75 mm - Piston Stroke: 150 mm - Cooling System: Water-cooled - Cooling Water Flow Rate: approx. 6.5 m³/h - Ambient Temperature Range: 0 – 40°C - Cooling Water Temperature Range: 5 – 40°C - Compressor Weight: approx. 2,900 kg - Motor Weight: approx. 830 kg - Complete Equipment Weight: approx. 7,230 kg - Pressure Gauges Observed:Final stage: approx. 42 bar 3rd stage: approx. 16 bar 2nd stage: approx. 6 bar 1st stage: approx. 2 bar Oil pressure: approx. 3.5 bar - Control Cabinet: Integrated electrical control cabinet, marked T2/7 - Operator Elements: Status lamps, analog hour meter and emergency stop - Status Indications: Temperature, water, oil, thermal relay and dryer fault - Safety Equipment: Belt-drive / flywheel safety guard and emergency stop - Construction: Green painted multi-stage compressor on structural steel skid - Additional Equipment Observed: Interstage header pipework, vertical separator / receiver vessel and overhead piping - Certification: CE-marked - Condition: Used, installed in industrial production environment

Condition: used, Year of construction: 2009, Overview  This oil separator was manufactured in 2009 by the German company Donaldson Filtration GmbH. The UFA-AC0016M model was part of a compressed air installation operating with two Atlas Copco GA132 VSD low-pressure compressors. The unit is still installed and connected, has been maintained regularly, with the latest maintenance completed in August 2025, and is immediately available for sale. It can be visited on request. Technical data  Dkedpfx Acoyb Th Ajnsr - Air operating pressure: 5.5 – 8.5 bar - Water operating pressure: 3 – 5 bar - Condensate operating pressure: up to 10 bar - Operating temperature: 4 – 70 °C

Condition: good (used), Year of construction: 1996, Fuel gauge, oil pump, oil dispenser, oil station, fuel pump, tank data acquisition, tank system display, oil cabinet, fresh oil pump -Manufacturer: Tecalemit, electric pump for fresh oil -Type: 1.54 80 01.4 -Flow rate: 1 to 10 l/min -Motor: Hanning 0.55 kW -Pressure vessel: Volume 2.8 liters -Individual components: see photos -Quantity: 1x oil cabinet available -Price: per piece Dksdpfxsw A Ndds Acnjr -Dimensions: 500/480/H250 mm -Weight: 19 kg/pc.

Condition: good (used), Oil-water separation system, condensate separator, oil and water separation apparatus, oil separator, oil/water separator, air compressor oil-water separator -Manufacturer: Jorc, oil-water separator -Type: AIRGROUP-SEP 30 -Dimensions: 970/440/H900 mm -Weight: 56 kg Dksdpfxjxz Avns Acnjr

Condition: good (used), DF separator, fine oil separator, air-oil separator, compressed air filter, filter cartridge, fine filter, filter, pre-filter, intake air filter, air filter housing, air filter housing, generator air filter -Manufacturer: Mann Filter, Air Oil Separator Filter Type 49 002 Dodpfjwbzxqox Acnjkr -Inside/outside: Ø 124/169 mm -Number: 5x air filters available -Price: per piece -Dimensions: Ø 190 x 315 mm -Weight: 2.6 kg/piece

Condition: good (used), Oil filling station, compressed air pump for fresh oil, remote oiling apparatus, oil dispensing device, oil filling device, oil transfer pump, gear oil pump, hydraulic oil pump, centrifugal gear oil pump -operated: pneumatically -Reel -Hose: 6 m - Manual valve with flow indicator Dksdpfx Acsb A Hzxonor -Number: 3x pumps with reel available Price: per piece -Weight: 60 kg/piece

Condition: good (used), Emulsion splitting plant, oil-water separation system Djdpjb A Ib Hsfx Acnskr The cost-effective and permanently reliable The solution to the problem is usually the oil/water- Separation for dispersed condensates. Purified water meets legal requirements Regulations for sewer discharge

Condition: good (used), Standard Radiator, Car Radiator, Oil Cooler, Heat Exchanger -Manufacturer: Longer Reich, light metal oil cooler cooler -Type: unfortunately no type designation -Motor: Siemens 0.37 kW -Pressure: max. 16 bar Dedpfxei En Dqo Acnekr -Temperature: max. 120 °C -Dimensions: 560/330/H540 mm -Weight: 28 kg

Condition: good (used), Extraction, filter system, oil mist separator, oil mist separator, air filter, mist separator, oil and emulsion mist separator Dedpfx Acji I Hc Hjnjkr -Ventilation grille: louvered grille, Filter for oil mist separator -Material: aluminum -Total dimensions: 440/330/H345 mm -Weight: 13.8kg

Condition: excellent (used), DF separator, fine oil separator, air-oil separator, compressed air filter, filter cartridge, fine filter, filter, pre-filter, intake air filter, air filter housing, air filter housing, generator air filter -Manufacturer: Ecoair, Air Oil Separator Filter Type N 2785000 / 49 302 52 171 Dkedpfxowbzzxe Acnjr -Inside/outside: Ø 110/170 mm -Bolt circle: Ø 210 mm -Quantity: 1x air filter available -Dimensions: Ø 245 x 420 mm -Weight: 3.4 kg.

Condition: good (used), DF separator, fine oil separator, air-oil separator, compressed air filter, filter cartridge, fine filter, filter, pre-filter, intake air filter, air filter housing, air filter housing, generator air filter -Manufacturer: Mahle Air Oil Separator Filter Type 852 631 Dksdpfxjwbz Das Acnor -Inside/outside: Ø 120/170 mm -Quantity: 1x air filter available -Dimensions: Ø 200 x 610 mm -Weight: 4.2 kg

Condition: good (used), oil-water separation system, condensate separator, oil and water separator, oil separator, separator, oil/water separator, oil/water separator Dksdpfxev Aip Uo Acnjr -Manufacturer: Kaeser, oil-water separator -Type: Aquamat 4 -Dimensions: 530/480/H1000 mm -Weight: 22 kg

Condition: good (used), Oil filter system, oil purification system, oil transfer system, hydraulic unit, hydraulic pump, hydraulic pump, hydraulic test pump Dkodpfjctvqisx Acnsr -Magnetic filter -for: hydraulic and other oils -electrical control -Dimensions: 820/420/H1030 mm -Weight: 70 kg