Used Oil Extractor for sale (11,189)

Condition: excellent (used), functionality: fully functional, power: 735.5 kW (1,000.00 HP), Year of construction: 2015, Oil drilling rig National 80 UE 1000 HP Hnodpox Nc Ddefx Ag Usg Year of manufacture: 2015 Fully operational

Condition: used, - Dimensions: 1970x2150x2730 mm - 2 trolleys: 800x600 mm - Baguette capacity: minimum 360 - Refractory stone (heat accumulator) - Integrated heat recovery unit - Baking surface: 19.2 m² - TOUCHMATIC touch screen control Hodpoxxanpjfx Ag Usng - Voltage: 400V - Power: 4 kW - Burner: Gas - ALL-IN-ONE = Rotary rack oven with integrated heat recovery unit - No additional trades required for installation - No electrical consumption by the heat recovery unit, as it is 100% mechanical - No need to connect to BMS (Building Management System)/central heating, no buffer tanks to store hot water - Automatic adjustment with no need for control, monitoring, or complex programming - Truly maintenance-free heat recovery unit - Heat recovery on each burner operating cycle - Long service life equal to that of the oven’s heat exchanger - Primary energy consumption reduced by 20% (oil/gas) - Improved baking results due to faster achievement of target baking temperature after loading - Further primary energy savings thanks to shorter baking times - No downtimes (no reheating periods) for continuous baking - Heat remains where it is produced and needed: in the baking chamber, to bake your delicious products

Condition: good (used), High-temperature temperature control unit up to 300°C in very good condition. With interfaces to the machine! Hjdpfx Agextiuhe Uong

Condition: used, Extractor Holzprofi G6000, year of manufacture 2021, very good condition, 4 kW, 71 kg Prices subject to change, errors, printing and typesetting errors reserved Hnodpfjvrvi Tsx Ag Uog

Year of construction: 2025, condition: new, Additional installed holding section. After reaching the adjusted pasteurizing temperature of Hsdpsgig Igjfx Ag Uong 90°C, to hold the juice on this temperature for 3 seconds, before it goes into the heated buffer tank of the filler.

Condition: excellent (used), Dust extractor unit to run with preduster. Almost as new. Hjdpfx Aeumm Npog Ujng

Condition: good (used), functionality: fully functional, type of input current: three-phase, input voltage: 400 V, volume flow: 2,400 m³/h, overall weight: 30 kg, power: 0.37 kW (0.50 HP), noise level: 67 dB, MAKRA oil mist collector system Technical characteristics: Supply voltage: 400 [V] Weight: 30 [Kg] Air volume: 2400 [m³/h] Cycle: 50 [Hz] Installed power: 0.37 [kW] Noise level: 67 [dB] Hnsdpfsxxihlex Ag Uog Machine visible in our premises by appointment. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed.

Condition: ready for operation (used), Year of construction: 2018, An unused above-ground double-walled tank for heating oil is available. Nominal capacity: 20000l, tank diameter: 2000mm, overall length: 6860mm, weight: approx. 3750kg. The tank has not been filled and is as clean as on delivery. Documentation available. An on-site inspection is possible. Hnodpex El Abofx Ag Ujg

Condition: like new (used), Year of construction: 2017, Oil hermetical distribution transformer - producer BEZ Bratislava, Slovakia, 1250kVA; 22/0,4kV, Dyn1, year of production 2017, functional, rutine test report Hedpfex Rp Edox Ag Uong

Condition: used, Regoplas RT50 Thermo oil temperature control unit Thermo oil up to 300'C Hsdpfx Asdmn E Hjg Uong

Year of construction: 2020, condition: new, Preinstalled mobil complete system inclusive Impeller juice pump, high efficient gas-boiler, heatexchanger and automatic temperature control. Components: Model on 2 fixed roller for heavy loads and 2 steering roller 160 kW Wolf gas boiler Hot water circulation pump Hedpscl Shvofx Ag Usng Expansion vessel Automatic temperature control Stainless steel (1.4401) plate heat exchanger Liquefied gas version incl. gas bottle holder and gas pressure regulator Capacity 2000l juice per hour Weight approx. 1000kg

Condition: new, functionality: fully functional, Year of construction: 2025, CORMAK DC2200 Model The CORMAK DC2200 is a powerful and robust cyclone dust extractor, designed to efficiently purify the air in woodworking shops, furniture factories, and metalworking facilities. Thanks to its cyclone separator, high-performance radial fan, and modern filtration system, the machine ensures effective particle separation and long-term high efficiency. Main Advantages of the CORMAK DC2200 High extraction capacity – up to 2800 m³/h – effective removal of dust and shavings from multiple workstations simultaneously Hedpfxsxrdhaj Ag Uong Cyclone separator – separates larger particles before the filter, extending its service life Powerful 2.2 kW (2200 W / 50 Hz) motor – stable and reliable continuous operation Large 151-liter metal container – convenient and safe waste collection Filtration area of 4.8 m² – ensures high efficiency in capturing fine dust particles Compact, mobile design – sturdy frame with transport wheels for easy movement Quiet operation – optimized fan design reduces noise without sacrificing performance Design and Technology The CORMAK DC2200 is equipped with a 365 mm radial fan, generating a maximum static pressure of 2220 Pa. This allows efficient air suction through long ducting systems and multiple workstations. The extractor offers three suction inlets (3 × Ø100 mm) and one main inlet (Ø200 mm) for flexible setup according to the production area layout. The cyclone separation system effectively removes heavier particles at the inlet, directing only pre-cleaned air to the container. The cylindrical filter (Ø370 × 612 mm) ensures consistent airflow even during intensive operation. Performance and Ergonomics The DC2200 extractor is designed for daily use in small and medium-sized workshops. The 151-liter container (Ø620 × 570 mm) provides long working cycles without frequent emptying. With its compact dimensions (1320 × 900 × 1840 mm) and lightweight design (136 kg net), the unit fits easily into any workspace. Applications The CORMAK DC2200 is ideal for use in: Carpentry and furniture workshops Sawmills and wood-processing facilities Model-making and metalworking shops Production of composite and MDF components Standard Equipment Cyclone separator Cylindrical filter with large filtration surface 151 L metal container for dust and shavings Transport wheels Suction inlets: Ø200 mm and 3 × Ø100 mm Technical Specifications Parameter Specification Motor power 2.2 kW / 50 Hz Airflow (without filter) 2800 m³/h Max. static pressure 2220 Pa Fan diameter 365 mm Inlet diameter 1 × Ø200 mm / 3 × Ø100 mm Container volume 151 L Container dimensions Ø620 × 570 mm Filter surface area 4.8 m² Filter dimensions Ø370 × 612 mm Overall dimensions (L × W × H) 1320 × 900 × 1840 mm Weight (net / gross) 136 / 170 kg

Condition: good (used), Year of construction: 1997, functionality: fully functional, type of input current: three-phase, filter area: 20.4 m², input voltage: 400 V, volume flow: 3,200 m³/h, overall weight: 336 kg, power: 3 kW (4.08 HP), input frequency: 50 Hz, DONALDSON DMC-D1 Torit Dryflo oil mist extraction and filtration system Technical characteristics : Serial N°: 261-4508 Supply voltage: 400 [V] Weight:336 [Kg] Air volume: 3200 [m³/h] Filter area: 20.4 [m²] Cycle: 50 [Hz] Hnjdpsxxid Hefx Ag Ueg Installed power: 3 [kW] Machine visible in our premises by appointment. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed.

Condition: used, Year of construction: 2013, type of input current: three-phase, filter area: 53.1 m², suction capacity: 3,000 m³/h, Welding fume extraction, dust extraction, self-cleaning, pneumatic, negative pressure filter by Donaldson Torit. Suitable for welding, grinding, sandblasting, and all types of dry dusts. Cartridge filter elements. The filter is cleaned pneumatically by compressed air pulses during operation, ensuring high device efficiency. Brand: Donaldson Torit DCE Model: DFO 3-3 Fan power: 5.5 kW Capacity: 3000 m3/h Filtration surface: 53.1 m2 Inlet diameter – 2 x 150 mm Year of manufacture – 2013 Hnsdpfxox Hfiwe Ag Usg Dimensions: Width – 1.65 m x 0.90 m Height – 3.25 m Stock no.: 1088

Condition: used, Year of construction: 2015, operating hours: 5,231 h, functionality: fully functional, machine/vehicle number: 2015019, type of input current: three-phase, overall weight: 1,590 kg, input voltage: 400 V, total width: 1,756 mm, total length: 2,066 mm, total height: 3,643 mm, power: 15 kW (20.39 HP), input frequency: 50 Hz, Equipment: oil mist separator, type plate available, Oil mist extraction from the workshop, plug & play filter tower for extraction during emissions of coolant lubricants in production halls. Filter ventilation tower IVAT Air FTower 20,000M. Ideal for aerosols, oil mist, emulsion mist and vapors. Industrial hall filtration ventilation – suitable for various technical manufacturing processes in production facilities, primarily in metalworking. In many cases, the extraction systems installed directly on machines for coolant recovery are either insufficiently efficient or not installed at all. Setup operations on machine tools, frequent opening of machine enclosures, or missing covers on machining heads can result in oil mist escaping from the machine area and reaching work zones, where employees are exposed to harmful mists and vapors. Installing a ventilation tower significantly improves air quality at workstations and should be considered the ideal complement to industrial hall filtration ventilation – especially where complete separation of oil mist via coolant recovery systems is either not possible or difficult to implement. Includes automatic room air and temperature monitoring. Hnsdpfxoxqf Hzj Ag Usg An innovative PLC control system compares sensor data and detects any exceedance of thresholds at workstations or increased temperature directly at the hall ceiling, then fully automatically regulates temperature and air quality. Filters are barely used, see images. Price ex works, pick-up only.

Year of construction: 2007, condition: used, Thermo oil cooking vessel Stainless, 2003, 250L, thermo-oil cooking vessel, up to 250'C temperature adjustable. Hjdpfx Ageb Uazmj Ueng

Condition: good (used), Line to produce Chinese and Japanese style chilli oils, has been producing Chinese style chilli oils for Chinese supermarkets, restaurants and cash and carry's. #chillioil Hnedpfxorzblbs Ag Usg

Condition: new, Year of construction: 2025, functionality: fully functional, The DC3000 from CORMAK is an advanced sawdust cyclone designed for intensive dust extraction processes in the woodworking, furniture and metalworking industries. Thanks to its state-of-the-art cyclone separator, powerful sawdust fan and double filtration system, the unit ensures effective air cleaning of fine and coarse dust fractions. The sawdust extractor DC3000 is distinguished by its automatic filter shaking and remote control - which significantly increases the comfort and efficiency of daily work. Technical parameters Extraction capacity 2000 - 7000 m³/h Fan rotation speed 2800 rpm Suction nozzle diameter 3 x 100 mm / 1 x 200 mm Number of containers 2 Motor power 3 kW / 400 V Dimensions 1300 x 1000 x 2200 mm Weight 219 kg Hnsdpewwtz Njfx Ag Uog Standard equipment Automatic filter shaker Remote control Pressure gauge Double filtration system (main and pre-filter) Metal container under the separator Transport wheels

Condition: reconditioned (used), Year of construction: 2009, 879 USED Thermo-oil ovens with 3 trolleys, 58x98 mm. Year of manufacture: 2009 EQUIPMENT: - each oven with a boiler room and chimneys, - 3 trolleys for each furnace, - number of levels: 10. TECHNICAL DATA: - 40 trolleys with new wheels, - New heating oil, - 2 new Riello gas burners, - 2 heating boilers, Hjdpfow Avbpjx Ag Uong - new control panel, PLC. We offer devices in various technical conditions and prices: 1. Directly from the bakery. 2. After inspection with a commissioning warranty. 3. After renovation with a 6-12 month warranty. The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: renovation / transport / assembly / commissioning of the device. The price is a net price per 1 pcs. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... bakery oven, bakery ovens, batch oven, shelf oven, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Condition: good (used), Tricool Thermal oil heater Model: SHK509A Hnedporwz N Iofx Ag Uog Sheik Thermail oil heater, adjustable digital controls, up to 350'C, mobile

Condition: good (used), Direct from closed food factory. Dimensions to follow. Hnodpfx Astp Nz Esg Usg

Condition: new, Year of construction: 2025, The CORMAK DCV5200E+ extractor is an efficient device for removing dust and wood chips, ideal for the carpentry industry. It has a 3 kW engine, a capacity of 5200 m³/h and 18 polyester filters that retain particles down to 5 microns. The compact design, metal rotor and the ability to connect to several machines ensure efficiency and cleanliness of work. Extractor equipped with an automatic shaking system! Technical parameters CONTINUOUS MOTOR POWER S1 3 kW / 400 V, 50 Hz SPEED 3000 rpm SUCTION EFFICIENCY 5200 m3/h SUCTION PIPE DIAMETER 200 mm SUMP SPEED 30 m/s FILTER SURFACE 10 m2 FILTER MATERIAL Polyester, 5 microns NUMBER OF FILTERS 18 DIMENSIONS 2441 x 940 x 2270 mm WEIGHT 260 kg Hnedpfx Ajwlr Azsg Usg

Condition: good (used), Oil storage tank with level gauge and ancillaries. 3500 litres. Has been used with a continuous fryer to store the oil when it is emptied. Model VTC3500 is the same as OLT3500. Hodsn Upivjpfx Ag Uong

Condition: new, functionality: fully functional, Year of construction: 2025, The FM230 extractor is characterized by small dimensions and at the same time high efficiency of up to 1000 m3/h. Standardly equipped with a metal rotor and a running base. Great value for money, which makes it an uncompromising device in its category. Many years of effort by our team resulted in the creation of a multi-patch metal impeller of the WhirlWind series, which, together with the massive metal casing, constitutes the heart of the extraction system. The vacuum air draft perfectly sucks excess sawdust generated during mechanical processing of wood, produced during machine operation. The massive construction of the extraction unit has been enriched with additional supports in the base to ensure stable and vibration-free operation of the device. The entire structure has been reinforced with appropriately thick supports that keep the chute cylinders and the weight of waste bags in the right position on a massive base. An additional advantage is the use of a flexible and durable gasket placed in a critical place to improve the tightness of the entire system. As standard, we equip the extractors with canvas bags (filter and waste) and additional disposable, durable plastic waste bags. Flexible metal bands ensure long-term trouble-free operation of bag replacement. The use of swivel and ball-bearing wheels ensures efficient movement of the extractor around the facility. Machine characteristics The perfect machine for both professionals and amateur carpenters. Optimum extraction performance works perfectly with machines such as: Planers Hedevu Az Uspfx Ag Uong Planers Thickness planers Milling machines Technical data ENGINE POWER 0.75 kW SUCTION PERFORMANCE 1000 m3/h VOLUME OF BAGS 60L NUMBER OF BAGS 2 DIAMETER OF SUCTION PIPE 100mm HEIGHT 1500mm WIDTH 420mm LENGTH 600mm VOLTAGE/FREQUENCY 230V WEIGHT 27kg

Condition: excellent (used), GEA OptiAir dust extractor unit. 2015 machine in nice condition. We have GEA OptiFlour II 600 units in stock to run with this. Hodpfev Ig Rmjx Ag Uong