Used Oil Heater for sale (13,189)

Condition: good (used), Tricool Thermal oil heater Model: SHK509A Dederwz N Iepfx Aa Howb Sheik Thermail oil heater, adjustable digital controls, up to 350'C, mobile

Year of construction: 2016, condition: ready for operation (used), Heating output: 1100kW, medium: heat transfer oil, oil type: Maroltherm LH, max. flow temperature: 300°C, permissible operating temperature: 300°C, permissible operating overpressure: 10bar, volume flow: 51m³/h, max. flue gas temperature: 400°C, flow monitoring (differential pressure): 0.1bar-0.36bar, cold start volume flow: 0.1bar, filling capacity: 1500l. Documentation available. On-site inspection is possible. Djdswtg Hdepfx Aa Howb

Condition: used, machine/vehicle number: Bongard 10.16, functionality: fully functional, -10 outlets -This oven is a Bongard 10.16 deck oven, a true classic for artisanal bakeries -Type: deck oven with ring-shaped tubes -Energy: gas or oil -Baking surface: 10 m² -Useful height per deck: 200 mm -Number of decks: 5 -Doors: 600 mm, 2 doors per deck -Controls: panel on the right -Steam: high-performance steam generator heated by exhaust gases Dwedpfx Aaey Duzwe Hsb -Voltage: 400V

Condition: excellent (used), Loos 1000kW heating container emergency heating with gas burner Conversion to oil or biogas possible Dwodjy Evltopfx Aa Hsb

Condition: excellent (used), Auxiliary heater Buderus 2500 kW. Oil + gas. Housed in 20-foot sea container. Dwedpfxex U Eyfj Aa Hsb

Condition: used, Year of construction: 2007, functionality: fully functional, overall weight: 200 kg, REA Jumbo 115 / Jumbo 200, mobile warm air generator (230 V) with separate flue gas duct, mounted oil burner RG 4, pre-installed heating oil filter, radial fan, and plug-ready thermostat interface. Year of manufacture: 2007 - Rated heat input: 115 kW - Air output: 9,000 m³/h - Connection: 230 V Dwodjyq Ricopfx Aa Hob - Weight: 200 kg Technical highlights of this series: - Burner hood with oil drip tray - Outlet opening: Ø 600 mm - Pre-fitted for recirculation operation - Shock-protected electrical distribution - Robust construction with large wheels for easy transport, even on rough terrain Accessories such as room thermostat, warm air hoses, tanks and tank heaters, as well as flue pipes and rain caps are not included in this offer but can be provided on request. Note: The buyer can arrange collection via a freight forwarder. If you do not have contact with forwarding agents, we are happy to provide addresses or arrange inquiries on your behalf.

Condition: used, For sale: Dwjdpfx Aaozcupdj Hob Oil-fired heating boiler VIESSMANN VITOLA-comferral Serial no. 7450285137530 100 Part no. 7450285-B Net price: 300 Euros.

Condition: ready for operation (used), functionality: fully functional, Oil Quick Pins ØShank Pin Distance Price: OQ70 60/60 280 330 €3,000.00 OQ80 90/90 345 510 €3,500.00 OQ80 90/90 353 515 €3,500.00 QO80 90/90 355 510 €3,500.00 OQ80 100/90 387 530 €3,500.00 OQ80 100/100 420 610 €3,500.00 OQ80 90/90 350 510 €3,500.00 OQ80 90/90 350 500 €3,500.00 OQ80 90/90 350 510 €3,500.00 OQ80 80/80 310 475 €3,500.00 OQ90 110/100 440 595 €18,000.00 OQ90 without mount €15,000.00 OQ90 110/110 470 590 €18,000.00 Verachtert Pins Ø Shank Pin Distance CW40 80/80 310 445 €2,000.00 Lehnhoff Pins Ø Shank Pin Distance HS21 80/80 465 333 €2,000.00 HS21 80/80 305 475 €2,000.00 Dwsdpfxexhdh Sj Aa Hsb Additionally, adapter plates available Liebherr Pins Ø Shank Pin Distance SWA 48 65/65 253 370 €2,000.00 SWA 48 80/70 350 420 €2,000.00 SWA 48 80/80 327 460 €2,000.00

Condition: used, Transmission, planetary gear for hydraulic motor, hydraulic motor, oil motor -Manufacturer: dinamic oil, gearbox type EH201 S 6.2 MO AS Djdpfxji Eg Ncj Aa Howb -Dimensions: see photos -Total dimensions: Ø 230 x 178 mm -Weight: 29 kg

Condition: used, Transmission, planetary gear for hydraulic motor, hydraulic motor, oil motor -Manufacturer: dinamic oil, gearbox type EH211 SN 6.2 -Dimensions: see photos Djdpfx Aaji Eg Nno Hjwb -Total dimensions: Ø 230 x 190 mm -Weight: 30 kg

Condition: used, Transmission, planetary gear for hydraulic motor, hydraulic motor, oil motor -Manufacturer: dinamic oil, gearbox type EH201 S 6.2 MO A16B Dsdpfx Aasi Eg Nvo Hswb -Dimensions: see photos -Total dimensions: Ø 230 x 178 mm -Weight: 29 kg

Condition: new, Year of construction: 2026, functionality: fully functional, Our honeycomb heater plates are manufactured and assembled to Clako’s own unique design. 1 Zone, 2 Zone + 4 Zone Heater Plates are manufactured by our own engineer to fit your Cylinder, Platen, Saroglia and Clamshell machines. Strong, durable & available in high grade hardened steel or lightweight toughened aluminium to suits your needs. Djdpfjyznu Ssx Aa Hswb All of our honeycomb plates are machined to true flatness. Dies (cliches) secure to our plates using low height toggles. Contact our team for details and price.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: nvt, overall weight: 25 kg, Brand new filling machine / filling machine / Dosing machine which can be used for filling liquids, pastes, creams, oils, etc. Suitable for almost all liquids but also thicker substances. At this point you could think of: Shampoos Creams Honey Jam Milk Yogurt Water Alcohol Pesto Disinfection Etc. Very solid machine made from high-quality stainless steel that runs on air and 220v, Plug and Play! Extremely suitable for filling small batches. A very small compressor is enough to get this machine working. This can be supplied if necessary. For this we recommend at least a 12L version. The filling machine has a 500ml cylinder so that it can fill a maximum of 500ml per stroke. By allowing the machine to deliver multiple strokes, a multiple of these is also fine. This also applies to 750ml by giving 2 x 375ml. The smallest stroke is 50ml, everything between 50 and 500ml can be lost in 1 stroke. We also have a model that has a cylinder of 100ml and can therefore fill between 5ml and 100ml per stroke. We would like to inform you further about this. It has a large 25L funnel, and it is also possible to connect the IBC or a 200L barrel to work even faster with large filling quantities. The machine is equipped with a foot pedal and auto mode. In the auto mode, the machine continues to fill continuously and larger quantities can be filled easily and quickly. The speed between fillings can be adjusted. The foot pedal allows you to fill at your own pace. Dsdpfsrivv Eex Aa Hswb Depending on the operator and number of ML, between 15-25 units per minute can be filled. Which makes this a very fast machine. The machine weighs approximately 15/20kg and can easily be placed on a table. Made entirely from stainless steel, a very high-quality machine. If you have any questions, please email us and we will be happy to help you with this or another machine. We also have a label machine which forms a very good combination with the filling machine. We aim to respond to you within 24 hours. Of course we can also be reached by telephone. We are happy to assist you on working days between 9:00 AM and 5:00 PM

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2012, operating hours: 3,000 h, machine/vehicle number: 200011402, load capacity: 200 kg, lifting height: 14,000 mm, lifting power: 200 kg/m, overall weight: 1,650 kg, empty load weight: 1,650 kg, transport width: 1,400 mm, transport height: 2,000 mm, construction height: 2,000 mm, next inspection (TÜV): 08/2026, fuel type: hybrid, fuel tank capacity: 5 l, tire condition: 50 %, color: white, maximum load weight: 200 kg, operation weight: 1,650 kg, Self-propelled, 14-meter tracked articulated boom lift for 200 kg and 120 kg loads, complete with electronic scale, available for sale! Year of manufacture 2012 for €21,800 net, year of manufacture 2014 with white tracks for €22,900 net. Only 78 cm passage width and 1.95 m passage height! Two-person platform with 1.4 m width, which can be detached from the boom with 2 bolts. Power and optical compressed air connection available in the platform and can be used. Operation is possible with gasoline or 230 V electricity (almost silent), allowing work to be carried out on weekends. All functions (driving, outriggers, lifting, etc.) can be operated with electricity or gasoline. Good condition, white, non-marking tracks, all services performed, switching unit for 120/200 kg is new! Djdszrf Saopfx Aa Hswb Fully functional and ready for use! (Current TÜV inspection has expired). If desired, a current TÜV inspection can be arranged. For further questions, please call or send an email.

Condition: used, Year of construction: 2007, - Brand : Oil & Steel / Nissan - Type : Snake 2112 Smart - Year of manufacture: 2007 (first operation 2012) - Hours: 4.546 hours - Odometer: 79,776 km. - Weight: 3250 kg. - Drive: Diesel - Trailer: 2000 kg Dsdpfxjy Umfce Aa Hswb - Working height: 21 meters - Lateral reach: 12.8 meters - Lifting capacity: 200 kg. - Narrow + Wide stamping - Dutch license plate : 9-VXV-31 - APK: 22-10-2026 - Export license plate possible - Safety inspection possible - Aerial work platform book available - Maintenance history available - CE document available - Video on our website - Trade-in and transport possible *Type: Snake 2112 Smart * Construction year: 2007 (first commissioned 2012) * Hours: 4546 uur * Km. position: 79776 km. * Weight: 3250 kg. * Drive: Diesel * Lateral reach: 12.8 meters * Lifting capacity: 200 kg. * Dutch license plate: 9-VXV-31 * APK: 22-10-2026 * Working height: 21 meters

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2010, operating hours: 990 h, machine/vehicle number: 198871007, mast type: telescopic, lifting height: 18,000 mm, overall weight: 2,700 kg, empty load weight: 2,700 kg, transport length: 5,200 mm, transport width: 1,400 mm, transport height: 2,000 mm, construction height: 2,000 mm, next inspection (TÜV): 01/2025, fuel type: hybrid, fuel tank capacity: 9 l, tire condition: 85 %, color: white, maximum load weight: 200 kg, Self-propelled crawler telescopic work platform with 18m working height and 8.5m lateral reach with 200kg basket load!!! in very good condition, overhauled in workshop, white non-marking crawlers radio remote control, petrol and electric operation, hydraulic track widening and narrowing possible via remote control, clearance height is less than 2 meters despite 18m working height very simple design, therefore very easy to service, Honda petrol engine with speed control via remote control (quieter operation possible) Dwedpfovmbzwox Aa Hjb All functions that are possible with the petrol engine work just as well as electrically Power and air in the basket Electronics/control units on the platform replaced, hydraulic hoses replaced, new ball bearings for electric motor, new rubber buffers, return filter, engine oil, fuel filter, air filter, paint on the platform is in good condition, no rust. the basket and the jib arm (the one in front of the basket) are rotatable (both functions are rotatable - special equipment!) the platform has a total of 3 rotation options (tower, jib arm and the basket) and each can be rotated separately! The crawler platform can be rented and purchased. new TÜV can be organized, TIMA transport trailer (with new inspection, new brakes) is also available to buy optionally for 8,000 net we can also organize transport of the platform worldwide!

Condition: used, power 298 kW gas burner 3 x 400V, 50 Hz Dwsdpozzcmmefx Aa Heb dimensions (l x w x h ) : ± 1.700 x 1.200 x 2.200 mm in good condition + Pump

Condition: used, Regoplas RT50 Thermo oil temperature control unit Thermo oil up to 300'C Dwodedmn E Hspfx Aa Hjb

Year of construction: 2012, condition: excellent (used), functionality: fully functional, 1 x Marden Edwards Limited semi-automatic shrink wrapper and heat tunnel. Supplied with new belt. Manufacturer: Marden Edwards Limited Shrink wrapper: Model - ES 60. Serial number - W3710. Heat tunnel: Model - M25-40T. Serial number - W3708. Date of manufacture - 2012. Tunnel aperture dimensions - 515mm wide x 410mm high. Film roller - 595mm long. Sealing bar - 640mm long. Cutting knife - 620mm long. Height between sealing bar and rollers at maximum height - 345mm high. Dwsdszwxv Nepfx Aa Heb Electrical requirements - 230 V / 50 hz / 1 phase.

Condition: used, Tricool 99 S2/50 chiller 50/S2/1617 stainless combi chiller on mobile skid, also with heating Dwsdpfxsdmn U Ao Aa Heb

Condition: used, Bongard MG Range Gas or oil-fired, depending on configuration Heating power: 110 kW Gas connection: 3/4" galvanized pipe Trolley: 800 × 1000 mm Dedszyafdopfx Aa Hjwb Trolley: 780 × 980 mm Maximum load: 200 kg 180 to 216 baguettes (250 g each) 18 levels for baguettes 108 to 135 loaves (400 g each) 15 levels for loaves Stainless steel baking chamber Rotating tray Pulsed steam injection Maximum temperature: 280 °C Power supply: 3N~400 V Electrical protection: 16 A Water pressure: 2.5 to 4 bar Water connection: 3/8" or 12/14 mm pipe Oil connection: 10/12 mm copper pipe Smoke exhaust: Ø 200 mm Dimensions: 2251 × 2062 × 2492 mm Depth with door open: 2774 mm Minimum door opening: 1020 mm Net weight: 1830 kg Key advantages Capacity of 180 to 216 baguettes (250 g each) Production of 108 to 135 loaves (400 g each) Rotating trolley loaded up to 200 kg Baking chamber entirely made of stainless steel Adjustable blowing vents Two valves for programmable steam evacuation Retractable and removable ramp for loading Front access to the burner and technical components Reinforced door with double-glazed, ventilated glass, removable

Condition: used, - Bongard 8.64 MG Series 4 - External dimensions: W 1440 x D 2700 x H 2600 mm - Baking chamber: W 680 x H 1900 mm - Rotating rack: 600 x 800 mm, 19 levels - Baking capacity: Up to 152 baguettes per batch - Rack rotation diameter: 1120 mm - Total baking surface: 9.1 m² - Heating capacity: 70 kW - Connection power: 0.18 kW - Maximum temperature: 280°C - Lifting mechanism: Rack with automatic lifting - Gas burner included for fast and even baking - Opticom electronic controls for precise baking parameter management - Pulsed steam injection, ideal for crispy and golden breads - Ergonomic handles and controls positioned on the right for easy operation - Fresh air intake at burner for optimal performance Djdpfx Aswr T Edsa Hewb - Voltage: 400 V / 3-phase - Weight: 1390 kg - Serial number: 930000015837 - Year of manufacture: 2014 Bongard 8.64 Series 4 Rotary Rack Oven – Gas or Oil Fired – Used A Compact Solution for Efficient and Uniform Baking Lrjy Tdewr T Edjxugsr Discover the Bongard 8.64 Series 4 Rotary Rack Oven, an outstanding second-hand solution offering both compactness and high performance. Designed to meet the needs of demanding professionals, this oven is ideal for maximizing production efficiency while optimizing your bakery space. Superior Performance for Even Baking The Bongard Series 4 Oven stands out thanks to advanced technologies that ensure uniform and top-quality baking: - Soft Flow Ventilation: This technology provides gentle, uniform air circulation, perfect for baking delicate goods such as fine pastries and rolls. Thanks to even heat distribution, your creations will remain intact and achieve ideal baking results. - Efficient Steam System: Equipped with structured cast iron gutters, the oven produces high-quality steam to improve the development of your bakery goods. For greater needs, optional ESG steam units can boost steam production capacity, ensuring optimal performance. Durable and Practical Design The Bongard 8.64 Series 4 Oven is built to withstand the rigors of intensive production environments while providing excellent user comfort: - Robustness and Longevity: Fitted with a high-performance refractory stainless steel heat exchanger and a reinforced base, this oven is engineered for outstanding durability. Electric elements are rigorously selected for maximum service life. - Simplified Maintenance: The seamless stainless steel baking chamber facilitates cleaning. Features such as the raised-edged floor and retractable steam units minimize residue accumulation. The listing was translated automatically. Translation errors are possible.

Condition: used, - Dimensions: 1350x1500x2300mm Dodpfxewtgprs Aa Hjwb - Model: Roto112-FCH - Trolley: 600x800 - Gas or oil - Year: 2011 - Voltage: 400V - Electrical power: 2kW - Heating power: 52kW

Condition: used, Year of construction: 1998, OVERVIEW This ABC 4HA-4-LT high-pressure reciprocating air compressor, manufactured in 1998, is designed for the supply of compressed air in PET bottle blowing applications. The compressor is manufactured by ABC – Arizaga, Bastarrica y Cía S.A. from Eibar, Spain. The machine is a 4-stage reciprocating compressor with oil-free cylinder compression design and a nominal pressure of 42 bar. It is belt-driven. The compressor is mounted on a structural steel skid and includes interstage piping, pressure monitoring, cooling water connections, main drive motor, belt-drive safety guard and integrated control cabinet. The machine is equipped with an analog pressure gauge panel showing the final stage, intermediate stages and oil pressure. The control cabinet is fitted with status lamps for temperature, water, oil, thermal relay and dryer fault indications, as well as an hour meter and emergency stop. Dsdpfx Aoziawrja Hewb   TECHNICAL DATA - Manufacturer: ABC – Arizaga, Bastarrica y Cía S.A. - Manufacturer Location: Eibar, Spain - Model / Type: 4HA-4-LT - Machine Type: High-pressure reciprocating air compressor - Year of Manufacture: 1998 - Application: High-pressure compressed air supply for PET bottle blowing - Compression Design: Oil-free cylinder compression - Number of Compression Stages: 4 stages - Nominal Pressure: 42 bar - Regulation Air Pressure: 8 bar - Suction Pressure: Not specified - Flow Rate: approx. 546.9 m³/h - Compressor Speed: 725 rpm - Motor Power: 150 CV / 110 kW - Total Power to Install: 158 HP / 115 kW - Transmission: Belt-driven - Power Voltage: 380 V - Control Voltage: 220 V - Frequency: 50 Hz - Cylinder Diameter, 1st Stage: 250 mm - Cylinder Diameter, 2nd Stage: 160 mm - Cylinder Diameter, 3rd Stage: 105 mm - Cylinder Diameter, 4th Stage: 75 mm - Piston Stroke: 150 mm - Cooling System: Water-cooled - Cooling Water Flow Rate: approx. 6.5 m³/h - Ambient Temperature Range: 0 – 40°C - Cooling Water Temperature Range: 5 – 40°C - Compressor Weight: approx. 2,900 kg - Motor Weight: approx. 830 kg - Complete Equipment Weight: approx. 7,230 kg - Pressure Gauges Observed:Final stage: approx. 42 bar 3rd stage: approx. 16 bar 2nd stage: approx. 6 bar 1st stage: approx. 2 bar Oil pressure: approx. 3.5 bar - Control Cabinet: Integrated electrical control cabinet, marked T2/7 - Operator Elements: Status lamps, analog hour meter and emergency stop - Status Indications: Temperature, water, oil, thermal relay and dryer fault - Safety Equipment: Belt-drive / flywheel safety guard and emergency stop - Construction: Green painted multi-stage compressor on structural steel skid - Additional Equipment Observed: Interstage header pipework, vertical separator / receiver vessel and overhead piping - Certification: CE-marked - Condition: Used, installed in industrial production environment

Condition: used, Year of construction: 2009, Overview  This oil separator was manufactured in 2009 by the German company Donaldson Filtration GmbH. The UFA-AC0016M model was part of a compressed air installation operating with two Atlas Copco GA132 VSD low-pressure compressors. The unit is still installed and connected, has been maintained regularly, with the latest maintenance completed in August 2025, and is immediately available for sale. It can be visited on request. Dodpoyb Th Aofx Aa Hewb Technical data  - Air operating pressure: 5.5 – 8.5 bar - Water operating pressure: 3 – 5 bar - Condensate operating pressure: up to 10 bar - Operating temperature: 4 – 70 °C