Used Gea for sale (210)

Condition: used, Year of construction: 2017, GEA CFS Slicer For cooked and uncooked meats, fish or cheese Year 2017 With shingle facility With weight adjustment It requires a new HMI screen Apart from this it is in very good condition Dwedpfx Acs Aibm Nsysd

Condition: used, Year of construction: 2009, operating hours: 10,000 h, functionality: fully functional, overall weight: 2,500 kg, Equipment: documentation/manual, 1 Gea decanter with a complete control panel, in working condition. 2 Gea decanters without a control panel. 1 Gea UCC 458.00.02 Dwedpfj Ahra Ujx Acysd 1 Gea UCC 501-00-02 1 Gea UCC 458.00-02 Sold as a set.

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: 2215, Type: OptiFlour 600 II Serial number: 2215 Year of construction: 2013 Belt width: 600 mm Power: 3 x 400V, 50Hz, 5.3kW Dimensions: 2750 x 1650 x 2300 mm Weight: 1025 kg GEA OptiAir cyclone Type: OPA Serial number: 515 Dwedpjymbfaofx Acyed Year of constuction: 2011 Power: 3 x 400V, 50Hz, 4kW Dimensions: 1350 x 950 x 1800 mm Weight: 450 kg

Condition: refurbished (used), The GEA Westfalia MZB10 continuous quark mixer is used within a quark line for continuous mixing of fat quark, fruit quark or spiced quark as well as for continuous dosing of cream. The two components to be mixed (quark and cream) are intensively mixed with the rotating mixing blades as they flow through the mixing head in the mixing cylinder. The mixture goes out of the unit by the outlet / drain pipe on top. The quark mixer is rotating at constant speed, produces a uniform cream quark of fine texture from the low-fat quark and cream which are fed to the mixer at constant rate. At regular intervals samples should be taken from the quark leaving the mixing blade is attached directly to the motor shaft. A hermetically shaft seal, seals the mixing chamber from the motor compartment. The mixing head can be dismantled in just a few steps and easily cleaned without the need for specialist personnel. Because of their solid consistency, fruit concentrates or spices must be mixed into a carrier liquid, usually cream, and added using a lobe pump. Because the fruit concentrate can contain whole fruits, the mixture must be combined with the low-fat curd before the mixer using a T-piece built into the low-fat curd line. The quark mixer is cleaned inline with the CIP. Capacity of end product: up to 3.000 kg/h depending on mixture composition. Motor: 4 kW - 380 V - 955 rpm - 9,3 A - 50 Hz - 3 Ph. Motor speed / mixing unit speed: 955 rpm. Specification for the dosing pump for cream (pump itself excluded): maximum feeding capacity: 990 ltr/h. Machine Type: Mixer Output Capacity: up to 3.000 kg/h depending on mixture composition Mixing unit speed: 950 rpm Motor Current: 4 kW - 380 V - 955 rpm - 9,3 A - 50 Hz - 3 Ph Dosing Pump Cream: Maximum feeding capacity: 990 ltr/h Dwsdpfxs Ah R Rgj Acyed Condition: Good

Condition: like new (used), Year of construction: 2019, functionality: fully functional, overall weight: 2,500 kg, temperature: 80 °C, power: 22 kW (29.91 HP), rotational speed (min.): 4,500 rpm, empty load weight: 2,500 kg, screw diameter: 305 mm, year of last overhaul: 2026, Equipment: documentation/manual, rotational speed infinitely variable, Complete Technical Data (GEA OCE 305-01-32)Technical ParameterSpecification and ValuesManufacturer & ModelGEA Westfalia Separator Group GmbH – OCE 305 SeriesEquipment TypeHigh-performance 2-phase decanter centrifuge (Solid-Liquid)Bowl Inner Diameter305 mmBowl DesignFlat-cone design with an extended length (Extended L/D ratio)Maximum Hydraulic CapacityUp to 5 m³/h (varies depending on solid concentration)Maximum Solids Density 2.6 kg/dm³Drive Type2-Gear Drive (System with 2 independent motors, no magnetic brake)Differential Speed ControlAutomatic via dedicated Variable Frequency Drives (VFD)Overall DimensionsLength: 3000 mm | Width: 1000 mm | Height: 1150 mmTotal Weight (Complete Skid)Approx. 2500 kgLubrication SystemAutomatic centralized grease lubrication for main bearingsConstruction MaterialsHigh-grade duplex stainless steel (all product-contact areas)Scroll Wear ProtectionSintered tungsten carbide tiles welded onto the flight edgesII. Liquid Discharge Under Pressure SystemUnlike standard models with gravity discharge (where the liquid falls freely into acollection tank), your model retains the clarified liquid phase inside a hydro-hermetic tripetal Pump (Paring Disk): The separated liquid flows toward the cylindrical end of the bowl, entering a special chamber where a stationary disk with spiral internal channels (a reverse turbine) is etic-to-Pressure Energy Conversion: The kinetic energy of the rapidly rotating liquid is instantly transformed into hydrostatic pressure when it hits the channels of the stationary cess Advantages: The liquid leaves the decanter directly under pressure (without requiring an external transfer pump). This prevents product foaming (highly critical for oils, chemical products, or food-grade applications) and eliminates contact with atmospheric oxygen Dodpezgq Szsfx Acyjwd Electrical cabinet with frequency inverters ant PLC (Siemens ) with acces code for modify the parameters , including factory documentation

Condition: used, Year of construction: 2022, functionality: fully functional, A GEA decanter CF 3000, year of manufacture 2022, is available for sale at our location in 55569 Monzingen. The decanter is used and has minor signs of wear. Currently, the decanter is still connected to the power supply and can be inspected by appointment. Dwsdpsz I S R Sjfx Acyod If you are interested, we will gladly send you a data sheet with detailed information about the system upon request. Dismantling, loading, and transport are the responsibility of the buyer.

Condition: used, Year of construction: 2019, machine/vehicle number: LC681, Used complete 10hl craft brewery lineTechnical Specifications & Performance DataThis complete 10 hl craft brewery and bottling line is built around a BBC INOX Essential 1000 steam-heated, two-vessel brewhouse. Designed for bottle-conditioned beer production, the plant combines brewing, fermentation, glycol cooling, gravity filling, labeling, crown capping, cold storage, cleaning and handling equipment in one integrated industrial packaging installation.Brew length: 10 hl / 1,000 L per brewBrewhouse: BBC INOX Essential 1000, two vessels, AISI 304 stainless steel, steam heatedHot liquor tank: 2,000 L AISI 304 tank with internal steam coilFermentation: 3 x 18 hl gross-volume cylindro-conical fermenters, approximately 15 hl working volume eachFilling system: six-head linear gravity bottle filler, 480 L/hBottle formats: compatible with 0.33L, 0.5L and 0.75L bottlesWort cooling: Kelvion plate heat exchanger, 2,000 L/hCellar output: approximately 700–800 hl/year with the installed fermentation capacityAdvanced Automation & Control SystemsThe brewhouse is equipped with a digital control panel featuring recipe programming, with capacity for 15 stored recipes, brewing-temperature display and control, and management of the wort pump and lauter rake. Individual temperature controllers on the fermenters support controlled glycol cooling across cone and shell zones.The semi-automatic OMB labeling machine uses an electric drive, label photocell and micrometric adjustments for accurate front and back label application on round bottles. The bottling section includes quick couplings and supply hoses, while the pneumatic AIR-MATIC crown capper requires compressed air for operation.Power supply: 380–400 V, three-phaseOMB labeling machine: 230 VMalt mill motor: 1.5 kWGlycol operation down to -5 °CProduction Line Integration CapabilitiesThis used bottling line forms part of a complete brewing and beverage production plant. The process moves from malt milling and wort production through cooling and fermentation, followed by priming, gravity filling, labeling, crown capping and cold-room bottle conditioning. It is suited to craft beer operations requiring a compact, coordinated production line with packaging machinery for glass bottles.Machine typeManufacturer / modelYearVarious EquipmentBBC INOX Essential 1000 Brewhouse2019ChillerMonobloc glycol chillerFilling MachineLinear gravity bottle filler... Dsdpsz E Dfcefx Acyswd

Condition: used, functionality: fully functional, machine/vehicle number: 1674938, We offer this used GEA Westfalia Separator CA 220-010 two-phase decanter, year of manufacture approx. 1985. Type: CA 220-010 Machine number: 1674938 Dwodpfx Aeyrdlaocyed Year of manufacture: approx. 1985 Bowl design: cylindroconical with screw conveyor for solid/liquid separation Bowl diameter: 220 mm L/D ratio: 2.65 Screw drive: Cyclo gearbox Connection voltage: 3 phase 400 VAC Connected load: 15 kW If you have any questions or require further information, please send us a message or call us.

Condition: used, all stainless steel suitable for thermal oil heating heating separately adjustable in two areas adjustable speed belt width ± 1.000 mm total length ± 9.400 mm canopy with electric hoists Suitable for steam injection (to heat up and to improve product yields) suitable for CIP cleaning system outside dimensions (l x w x h): ± 12.609 x 2.098 x 3.400 mm with extra outfeed conveyor: (l x b): ± 2.000 x 1.000 mm in good condition Fully mechanically overhauled: New bearings, chains, seals, slide bushings, gears, … All (motor-)driven transmissions overhauled or replaced with new ones Hood and tank completely re-insulated New grill belt, standard dimensions for snack products All wear-sensitive components replaced or fully overhauled General cleaning, overhaul, and inspection of the construction Fully electrically overhauled + update of electrical cabinet and control system: All electrical components and cables replaced with new ones Conventional push-button operation with Jumo temperature PID controller New electrical diagrams (E-Plan) New sensors Coding/labeling of components and cables New thermal oil control station : Pneumatically operated 3-way thermal oil control valves (A, B, AB) By-pass circuit Thermal oil filters Bellows-sealed shut-off valves with handwheel Temperature reading Pressure measurement Dsdpfx Ao Aid Rbocyewd Stainless-steel frame (protective side panels for hot piping and components) Stainless-steel piping and flanges (for the thermal control station only)

Condition: used, Year of construction: 2018, operating hours: 8,000 h, machine/vehicle number: LC641, Used GEA Procomac Aseptic filling line 48000 BPHTechnical Specifications & Performance DataThis used bottling line is a high-performance aseptic PET solution engineered by GEA Procomac for industrial packaging and beverage production. Designed for second hand acquisition without sacrificing technical integrity, the line delivers a rated capacity of 48,000 BPH with dry aseptic technology and integrated fruit-piece dosing capability.Rated capacity: 48,000 BPHAseptic method: Dry asepticContainer format: 0.23L (two different molds)Bottle neck & cap: 38mm neck, double-layer 38mm capBlower: SIPA, 24 cavitiesFiller: GEA Procomac Fillstar FX isobaric filler, 84 valvesFruit-piece dosing: 24 valvesCapper: 24 nozzlesGas unit: None (suitable for low-acid and neutral products)Operating hours: 8000Year of manufacture: 2018Downstream speeds: Dual 24,000 BPH modules on key packaging operationsKey models/codes: Fillstar FX; outer-cap machine model NYG18H-00Advanced Automation & Control SystemsThe line integrates advanced aseptic handling and in-line quality control. Preform sterilization, cap feeding and sterilization, and H2O2 injection are automated to maintain hygienic integrity. Optical and X-ray inspection systems monitor critical control points with reject mechanisms for non-conforming containers. A dedicated aseptic water and CIP unit supports repeatable sanitation cycles and short changeover times. Automated components are engineered for consistent performance in high-speed production environments.Production Line Integration CapabilitiesConfigured as a complete production line for PET bottles, the system combines container handling, filling, labeling, secondary packaging, and palletizing. It includes a 24-cavity SIPA blower, GEA Procomac isobaric filler, fruit-piece dosing, sleeve and neck labeling, shrink wrapping, carton packing with industrial robots, accumulation buffering, and palletizing. Format flexibility includes 0.23L with two mold sets and 38mm neck finish. The modular layout supports synchronization across conveyors and buffering for continuous operation.Machine Condition & Maintenance HistoryThe line is still on power and reported in very good condition. Operating hours are approximately 8000. Manuals are available to support installation, operation, and maintenance. The equipment set is recent (predominantly 2018), with select processing assets from 2007 and 2019 included, indicating a professionally maintained and upgraded system.Operational Performance & VersatilityOptimized for low-acid and neutral product aseptic bottling, the configuration is suitable for premium beverage production requiring sterile conditions and gentle handling—especially products containing fruit pieces. Processing assets include tubular pasteurizers, UHT capability, homogenization, deaeration, and aseptic tanks, supporting robust beverage preparation workflows. Dual 24,000 BPH downstream modules help ba... Dsdpfe Ady Dxox Acyewd

Condition: used, Unused GEA Niro type F01A stainless steel rotary atomiser suitable for use with GEA Niro Mobile Minor spray dryer. No atomiser wheel included. Dsdps Agvz Nofx Acyswd

Condition: used, all stainless steel electrically heated, 90 kW net belt length 3.000 mm net belt width 600 mm frying time min/max : 25/250s with lower and upper belt sediment removal system lifting unit with electrical hoists dimensions (l x w x h) : ± 6.092 x 2.365 x 1.985 mm suitable for fire protection weight : 2.750 kg oil level control Dwsdpfx Acj Aid Rieysd circulation pump with Teflon infeed belt

Condition: used, Year of construction: 2018, machine/vehicle number: LC667, Used GEA Aseptic filling line 48000 BPH - year 2020 (data of use)Technical Specifications & Performance DataThis used bottling line is a 2020 PET aseptic production line configured for 230 ml PET bottled water at a rated output of 48,000 bph. It combines PET bottle blowing, aseptic processing, filling, capping, labeling, inspection and secondary packaging for high-output beverage production.* Production capacity: 48,000 bph* Available bottle format: 230 ml PET only* Main line year: 2018, 2020 (data of use)* Blowing equipment: SIPA SFR24 EVO, 48,000 bph* Filling equipment: GEA FILLSTAR FX AS 84 PET filler, 48,000 bph* Compressor: AF L5S, 35 bar, 220 kWAdvanced Automation & Control SystemsThe line includes electrical control cabinets with HMI displays, ventilated electrical enclosures and high-voltage warning protection. Process equipment includes a Tetra Pak FLEX1 PET UHT sterilizer rated at 17 t/h, a Tetra Pak 15,000 L/h homogenizer rated at 90 kW, a 15,000 L/h yogurt secondary pasteurizer, pulsed-light sterilizers, laser marking machines and visual inspection systems.Product preparation assets include four 25 m³/h centrifugal pumps rated at 7.5 kW, two 30 m³/h centrifugal pumps rated at 18.5 kW, one 12,000 L/h rotary pump rated at 7.5 kW and one 20,000 L/h rotary pump rated at 18.5 kW. The installation also includes a triple 100 mm high-pressure filter, model ECS7003SCA5H19-A61.Production Line Integration CapabilitiesThe PET production line integrates bottle blowing, drying, aseptic filling and capping, cap handling, labeling, coding, inspection, carton packing, sealing and conveying. A GEA conveyor chain system provides bottle transport at 20 to 60 m/min. Five bottle dryer sets with conveyors are included, together with two GEA dryers rated at 700/840 m³/h.Machine type | Manufacturer / model | YearMachine typeManufacturer / modelYearBlow Molding MachineSIPA SFR24 EVO2020 (data of use)Filling MachineGEA FILLSTAR FX AS 84 PET2020 (data of use)Labeling MachineGuangzhou Lixin AP-400H2020 (data of use)Labeling MachineGuangzhou Santuo SL-695 Dwedpfx Acszwu Uujyed

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 0509, 🔧 Key Features Continuous Operation: Designed for uninterrupted processing, ensuring efficient separation of solids and liquids. Dwsdewnx Ngjpfx Acysd High Separation Efficiency: Capable of achieving significant separation of solids, oil, and water, with capacities up to 30 m³/h, depending on the model. Robust Construction: Built with durable materials, such as 304 stainless steel for product contact parts, ensuring longevity and resistance to corrosion. Advanced Control Systems: Equipped with PLC control panels featuring user-friendly interfaces for precise operation and monitoring.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Manufacturer: GEA / CFS Type: Smart Packer CX180 Year of manufacture: 2012 Design: Vertical form, fill and seal machine (VFFS) Performance: Dwsdpfxe Ahrnls Acysd Maximum output: up to 85 bags/minute, depending on the product and packaging format Output for mozzarella balls: approx. 65 bags/minute Electrical connection: 5.5 kW Machine weight: approx. 750 kg

Condition: used, Year of construction: 2013, Manufacturer: GEA Model: OptiDipper 650 Year: 2013 Condition: Used Serial Number: 87 Stock Number: 3254 Belt width: 650 mm Dwedpsz Ei Icefx Acyod Product height: max 50 mm Filling: min 40 L Infeed conveyor length: 600 mm Outfeed conveyor length: 950 mm Power: 3 x 400V, 50Hz, 1.8kW Dimensions; 3850 x 1400 x 1350 mm Weight: 850 kg

Year of construction: 2003, condition: used, Manufacturer: GEA Process Engineering S.A.S. Model: Batch Formula Coaxial Manufacturer’s description: Food preparation tank Year of manufacture: 2023 Identification numbers: 2023/01 – 2023/02 – 2023/03 Machine type: Preparation vessel with high-shear mixer at the bottom of the vessel and coaxial mixing + scrapers Application: Food product preparation Function: Batch mixing, dispersion and emulsification Set Dodpfx Ao Ahkz Ujcyowd - Quantity available: 3 identical units - Storage condition: disassembled, stored on the Osertech premises Tank specifications - Volume: 5,000 L - Useful volume: 3,000 L - Pressure: -1 / 3 barG - Temperature: 0–100°C - Jacketed : -1/5 barG; 145°C - Maximum dry matter content: 80 per cent - Maximum viscosity: 50,000 cP - Maximum powder feed rate: 100 kg/min - Material of parts in contact with the product: AISI 316L stainless steel - Tank bottom: high-speed agitator - Domed lid with manhole secured by knobs - CIP/NEP cleaning balls - Inspection window - Pressure gauge at the top Vacuum pump - Manufacturer: Busch - Model: LX 0330 C AM0 - Ultimate pressure: 33 mbar Product pump- Fristam FDS 2-5: twin-screw- Flow rate: 3,650 – 35,000 L/h- Viscosity: 7,500 – 16,500 mPas High-shear mixer - Rotor / stator - Power: 90 kW Coaxial agitation - Agitation unit manufacturer: PMS – Process Mixing Solutions - Scraper impeller with scrapers - Propeller shaft: 2 rows of propellers offset by 60° Gear motor 1 - Power: 11 kW at 1,465 rpm - Output speed: 21 rpm Gear motor 2 - Power: 9.2 kW at 1,470 rpm - Output speed: 53 rpm Requires a new electrical box (power/control). This request may be subject to a separate quotation.

Condition: used, all stainless steel 3 tiers nett belt length ± 5.800 mm nett belt width ± 940 mm stainless steel mesh wire belt outside dimensions (l x w x h) : ± 7.200 x 1.400 x 2.900 mm + Evaporator "Goedhart B.V." Dsdpfxe Ah R S No Acyowd Type LLK.s 411m² manufacturing number: PJV100282 Year of manufacture: 2010 Capacity: 135 dm³ Refrigerant: NH3 Weight: 770 kg, Working pressure: 22 bar Test pressure: 32 bar Overall dimensions including cooling panels and stainless steel door: 7.500 x 2.700 x 3.300 mm

Condition: used, all stainless steel Dwodpfx Aj Ah Ecfecyod mobile adjustable speed belt width 600 mm with air knife dimensions (l x w x h) : ± 3.250 x 1.000 x 2.000 mm

Condition: as good as new (ex-display), Year of construction: 2021, Direct from closed meat-free factory which opened in 2021. All machinery in near new condition and from 2021 and 2022. Very low running hours. Can be sold as whole line. Priced for end users only. New cost from GEA £1.66M Dodpfx Acoyvav Njyewd

Condition: as good as new (ex-display), Year of construction: 2021, Direct from closed meat-free factory which opened in 2021. All machinery in near new condition and from 2021 and 2022. Very low running hours. Can be sold as whole line. Priced for end users only. New cost from GEA £1.66M Dodpfoyvau Eex Acyowd

Condition: used, all stainless steel suitable for thermal oil heating nett belt length 7.000 mm nett belt width 700 mm adjustable speed infeed conveyor outfeed conveyor sediment removal system filter mechanical hoists overall dimensions (l x w x h) : ± 12.500 x 2.400 x 3.900 mm thermic heating power 254 kw Dwedpfxs Ah R S Eo Acyod

Condition: ready for operation (used), functionality: fully functional, Complete line: * Gea fryer / daily tanks / thermal oil boilers * Advanced spiral freezer * 2 x Sabroe compressors Gea Fryer Type 1000/6000 Baking length 6000 meters Belt width 1000 mm Dwjdpozd Tvqefx Acyed Infeed with Teflon coating Including CO2 extinguishing system Including daily tanks and thermal oil boiler. Year of manufacture 2010 Advanced Freezer See all information and photos, year of manufacture 2008 Ammonia compressor Johnscontrol. Year of manufacture 2016 Including control system and tanks.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 23900101, Equipment: type plate available, PACKAGING MACHINE FOR FOOD PRODUCTS SUCH AS MEAT, COLD CUTS, CHEESE, IN FILM PACKAGING UNDER VACUUM OR IN INERT GAS. THE MACHINE HAS FIVE FORMATS. I HAVE A LARGE SET OF SPARE PARTS FOR THE MACHINE: KNIVES, SEALS, VALVES, ETC. Djdpfew Emh Esx Acyowd

Condition: like new (used), Year of construction: 2021, Almost brand new condition. Bought in 2021 and only used for a few months before factory Bankruptcy. Great saving on new price. Dwedpjx Hazujfx Acyed