Used Corn Oil Press Machine for sale (70,110)

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 902 S Hidrolik Alüminyum Köşe Presi Makinesi, • Complies with CE standards • Corner press machine designed for joining aluminium profiles at 90 degrees Podpfjrbk Tfsx Abfopw • 2 upper presses and blade movement are hydraulic • Equipped with a mm scale system for adjusting blade height and feed • Centering square stop is hydraulic • Drain button for fine adjustment is available • Machine comes with 2 pieces of 4 mm blades • 2 pedals are used for hydraulic pressing and profile clamping • Polyamide plate is provided to prevent damage to profile surfaces • Left and right profile support arms are available

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 901 S Pnömatik Alüminyum Köşe Presi Makinası, - Conforms to CE standards - Corner press machine designed for 90 degree joining of aluminum profiles - 2 top presses and blade movement is pneumatic - There is a mm ruler system for the height and advancement of the blades. - Centering miter wedge is automatic - Drain button available for fine adjustment - Pneumatic presses use 2 pedals to squeeze the profile - Profile surfaces are polyamide sheet to prevent damage Pedpfx Ajrbiv Asbfspw - Side support arms available

Condition: good (used), MBO K760E S-KTL/6+ Folding Machine with SBAP 82ME Press Manufactured in 2016. Paper format: 760x1100mm Maximum speed: 180m/min High stack feeding, FP-95 pallet feeder 6 cassettes on the first unit 2 knives 1 side cassette after the knife Psdpfszlaimex Abfepw Additional veneer cassette. Sound insulation on all units MBO SBAP-82ME stacking press Spare parts and documentation included. The machine is in perfect condition, ready to work.

Condition: good (used), Schmedt PraLeg XL 18-60 Case in machine + Schmedt PraForm 21-50 Press Manufactured in 2022. Schmedt PraLeg XL 18-60 Book Hanger Machine in good condition, ready to operate. The machine hangs a book block into a prepared hardcover. Two gluers, smooth glue thickness adjustment. Format: Block height: 80 – 450 mm Block width: 110 – 450 mm Block thickness: 2 – 80 mm Production rate: approx. 200 – 300 pcs/h Power supply: 230V Weight: 300 kg Podpozdazbjfx Abfopw Made in Germany. Schmedt PraForm 21-50 Book Press Book press with groove cutter. Made in Schmedt, Germany. The machine is in very good condition, ready for production. Technical specifications: Maximum format: 420 x 520 x 100 mm Weight: 220 kg Power supply: 230 V + compressed air. Price is for a set of two machines.

Condition: new, Year of construction: 2025, functionality: fully functional, input voltage: 380 V, input frequency: 50 Hz, stroke length: 200 mm, operating speed: 50 mm/s, reverse speed: 180 mm/s, table length: 3,200 mm, total length: 3,915 mm, total width: 1,605 mm, total height: 2,655 mm, overall weight: 8,000 kg, bending force (max.): 1,000 t, bending angle (max.): 90 °, warranty duration: 24 months, working height: 450 mm, All-Electric Servo Bending Machine Nominal force(KN): 1000 Pedev Hchlspfx Abfjpw Slider stroke(mm): 200 Throat depth (mm): 360 X-axistravel(mm): 600 R-axistravel(mm): 200 Z-axistravel(mm): 2500 🔹 Smart CNC System – SL100-P with high-end algorithms and 12-inch touchscreen for intuitive operation. 🔹 High-Precision Structure – Finite element analysis (FEA), annealed, and one-time machining for long-term stability and accuracy. 🔹 4-Axis Intelligent Backgauge – AC servo-driven, high-speed positioning with automatic collision avoidance. 🔹 Precision Compensation System – Adjustable convex strips & fine-tuning mechanism for optimal bending accuracy. 🔹 Powerful & Durable Drive – High-torque servo motor, heavy-duty ball screws & sealed protection for longevity. 🔹 Fully Closed-Loop Control – Y1/Y2 magnetic scale feedback, positioning accuracy ±5μm. 🔹 Optimized Electrical System – Closed electrical box, heat dissipation, & neat wiring for reliability and easy maintenance. 🔹 Imported Precision Components – Ball screws & linear guides ensure accuracy without stroke compensation. 🔹 High precision, stability, and smart automation – designed for professional sheet metal bending!

Condition: new, Year of construction: 2026, functionality: fully functional, power: 22 kW (29.91 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 315 t, stroke length: 800 mm, operating speed: 120 mm/s, reverse speed: 100 mm/s, table width: 1,160 mm, table length: 1,260 mm, table height: 600 mm, ram plate width: 1,160 mm, ram plate length: 1,260 mm, distance table to ram: 1,250 mm, clearance between the columns: 1,160 mm, retraction force: 30 t, oil tank capacity: 510 l, total length: 2,000 mm, total width: 1,250 mm, total height: 3,500 mm, overall weight: 13,000 kg, Equipment: CE marking, documentation/manual, safety light barrier, YQ32-315T Hydraulic Press This series of presses are general-purpose hydraulic presses, widely used in machinery manufacturing, automotive, motor, electrical appliance, light industry and other industries. They are suitable for metal processing procedures including drawing, bending, flanging, cold extrusion and blanking. The machines also perform straightening, press fitting, as well as compression molding of powder products, abrasive products, plastic products and insulating materials. The working pressure, pressing speed and stroke can all be adjusted within the specified parameter range according to process requirements. Equipped with an independent power unit and electrical control system, the press adopts centralized push-button control and supports three operation modes: manual, semi-automatic and automatic. It is available with two pressing modes: pressure setting and stroke setting. Operation Sequence: Motor start → Main cylinder piston rapid no-load downstroke → Low-speed pressurization → Pressure holding (holding time adjustable) → Pressure relief → Slide return stroke → Work stop → Total stop Mainframe The mainframe adopts a vertical three-beam four-column structure, consisting of an upper beam, a slide, and a lower beam connected by four columns, which are fastened with nuts to form a closed rigid frame. All major structural components of the mainframe are fabricated from welded steel plates using CO₂ gas shielded welding. After welding, the entire frame undergoes vibration stress relief to eliminate internal residual stresses. Key components are machined on advanced equipment such as gantry milling machines, large floor-type boring and milling machines, and large precision lathes, ensuring high overall accuracy of the machine. The mainframe is pre-tensioned using hydraulic nuts. The slide is connected to the piston rod of the main cylinder and moves up and down guided by the columns. T-slots are provided on the lower surface of the slide and the upper surface of the movable worktable for die mounting. The columns are made of high-quality 45 carbon steel with hard chrome plating on the surface; the column guide sleeves are made of composite material, offering excellent wear resistance and self-lubricating properties. Pjdpfx Abjy Uiyvsfepw

Condition: new, Year of construction: 2026, functionality: fully functional, power: 7.5 kW (10.20 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 100 t, stroke length: 200 mm, operating speed: 140 mm/s, reverse speed: 130 mm/s, table width: 60 mm, table length: 3,200 mm, table height: 850 mm, throat depth: 500 mm, ram plate width: 50 mm, ram plate length: 3,200 mm, distance table to ram: 460 mm, clearance between the columns: 2,700 mm, retraction force: 10 t, oil tank capacity: 230 l, total length: 3,800 mm, total width: 1,800 mm, total height: 2,750 mm, overall weight: 7,300 kg, Equipment: CE marking, documentation/manual, safety light barrier, This machine tool is designed and manufactured with the latest technology, ensuring its strength, rigidity and safety performance. It adopts an integral high-quality steel plate welded structure with a heavy-duty and high-rigidity frame. The machine surface is coated with imported anti-rust primer and topcoat, keeping the equipment in good condition permanently. The machine tool is mainly composed of the frame, upper slide, backgauge system, slide block and synchronous control device, dies, hydraulic system, control system and other components. Product detail display Ppodoy Uc Nkjpfx Abfjw Frame Section It adopts a frame-type structure, consisting of worktable vertical plates, left and right side plates, and connecting beams. It is integrally welded with steel plates, featuring high rigidity, high strength and excellent resistance to torsional deformation. Internal stress is eliminated through processes such as surface shot blasting, ensuring long-term stability of the overall machine precision. During bending, the deformation of the upper slide and worktable is minimal, which guarantees excellent straightness and angular consistency of workpieces. Die and Clamping Device It is composed of upper and lower dies, featuring high precision, premium quality and long service life. The upper die is mounted on the slide block, securely fixed by a precision quick-release clamping device. The lower die adopts a dual-V concentric design, allowing for fast and convenient die changeover, effectively reducing operator labor intensity, and significantly improving overall production efficiency.device. The lower die adopts dual V concentric design, enabling fast and convenient die change, reducing intensity and improving efficiency. Throat Opening Deflection Compensation Device A linear encoder is installed on each side of the machine to measure and feed back the precise distance between the slide block and the lower worktable. The encoders are connected to the worktable via C-frames, effectively eliminating the influence of frame throat deformation on the slide block position. Position data is fed back to the CNC system, which outputs signals to control the hydraulic proportional servo valves, ensuring accurate synchronization of the two cylinders. Backgauge System Adopts the latest Belgian-designed backgauge for exceptional precision and stability. Driven by servo motors and ball screws, it delivers high speed and outstanding positioning accuracy. The unique dual linear guide rail structure ensures excellent long-term repeatability. Multi-stage positioning expands the working range, offering superior value for investment. Modular design allows axis configuration from single-axis X to multi-axis options. Mechanical Compensation Device Adopts an integrated mechanical compensation wedge block, motor-driven for precise adjustment. It automatically fine-tunes the worktable alignment, offsetting deflection caused by bending forces. The system ensures consistent precision along the entire length of the workpiece. It provides reliable, repeatable adjustment, eliminating the need for manual correction, and significantly improving bending accuracy.

Condition: excellent (used), Year of construction: 2013, Ref:11118 . 2013 Schmedt Präleg & Präform Casing-in & Pressing Machines. For casing-in a variety of thin to thick books into flexible or hard cases. Special features:- • Programme selection via touch-screen monitor • Very short set-up and strip down times • Auto wash-up of glue rollers after each book Vertical wing action Twin PVA cold glue tanks Working in conjunction with:- Ppjdpfx Abozkgdzjfow 2008 Schmedt Präform 2100 Pressing & Joint Forming Machine. For pressing a variety of thin to thick hard cover books immediately after casing-in. Suitable for single or assorted books, pressing & burning in the joint in a single operation. Specification, Praleg 18-60: Block height: 80 – 450 mm Block width: 110 – 450 mm Block thickness: 2 – 80 mm Production rate: approx. 200 – 300 pcs/h Specification, PraForm 2100 Book press with groove cutter. Maximum format: 420 x 520 x 100 mm Power supply: 230 V + compressed air.

Condition: used, CNC press brake FASTI, Type 904-125/30 Serial No. 95-904-5775 Year of manufacture 1995 Press force 125 tons Working length 3050 mm Stroke approx. 335 mm Stand distance 300 mm Distance between side stands 2550 mm Tool installation height max. 465 mm (opening width between tool holders) Table width 90 mm (the clamping system is mounted on the table) Table height above floor 875 mm (910 mm with clamping system) Back gauge X-axis 500 mm Back gauge R-axis 115 mm Back gauge Z-axis approx. 1950 mm Lowering speed Y-axis rapid traverse 90 mm/s Lowering speed Y-axis working traverse 8.9 mm/s Return speed Y-axis retraction 75 mm/s Oil capacity approx. 160 liters Motor power 18.5 kW Mains connection 400 volts, 50 Hz, 20 amps - 7-axis CNC control DELEM, Type DA 58 with LCD screen - 1 axis for back gauge - gauge depth (X-axis) Pjdpfshmmfkex Abfopw - 2 axes for back gauge - gauge height (finger R1 + finger R2) - 2 axes for back gauge - gauge fingers, laterally adjustable (finger Z1 + finger Z2) - 2 axes for press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and 2-hand control panel or only 2-hand control panel - Hydraulic tool clamping for the upper tool system TRUMPF, with 20 mm clamping groove - Hydraulic tool clamping for the lower tool with 13 mm table groove, depth 21 mm (tool shank 13 x 20 mm) - Safety light curtain FIESSLER, Type AKAS - 2 pcs material support arms, manually adjustable laterally and in height - Electrical diagram, hydraulic diagram, user manual for control system available - Control cabinet on the machine - Without tools Space requirement L x W x H 5000 x 2500 x 3050 mm Transport dimensions L x W x H 5200 x 1900 x 2950 mm Weight 8.5 tons Good condition

Condition: used, 2-station notching machine and folding machine EUROMAC type Multi 220/6R Ppsdpfx Abomck Ryefsw Press brake, press brake, notching machine Serial no. M11941298 Year of manufacture 1998 Cutting capacity 6 mm steel at 45 kg/mm2 4 mm for stainless steel Station I (notching) Notching angle 60° to 140° (with special blade from 30° to 140°) Knife length 220 mm Table size 950 x 640 - Manual angle adjustment via hand wheels - Notching angle with built-in blade set from 60° to 140 - Hydraulic clamping of the upper and lower knives - Automatic cutting gap adjustment - sheet hold-down device - Scaled measuring tapes embedded in the table - stop rails with angle adjustment - Operation via foot switch Station II (die bending device) Pressure force 18 ton Table size 950 x 340 Working height 1100 mm - stepless lifting speed - Infinitely adjustable stroke limiter - Stroke adjustment up to 30 mm working stroke - Reversible prism with 4x 90° prisms, length = 415 mm - 90° upper tool, length = 415 mm Motor power 4 kW Mains connection 400 Volt, 50 Hz Space requirement L x W x H 1150 x 1050 x 1460 mm Weight approx. 1000 kg good condition

Condition: used, Servo press brake SAFAN Type SMK-P 50-2550 TS1 Downstroke bending machine with 4-axis CNC control Serial No. MK 285 Year of manufacture: 1998 CNC control SAFAN software version 5.07 TS1 Press force: 500 kN (50 tons) Working length: 2550 mm Stroke: 215 mm Clearance between side frames: 2700 mm Tool installation height: max. 414 mm Table width: 55 mm Table height above floor: 950 mm Approach speed: approx. 75 mm/s Return speed: approx. 75 mm/s Working speed: approx. 1.6 to 15 mm/s Motor power: 9 kW Power supply: 400 Volt, 50 Hz, 9 kW - 4-axis CNC control SAFAN software version 5.07 TS1, Y1 and Y2 axis for ram - 2-axis backgauge, X-axis (backgauge depth adjustment), R-axis (backgauge height adjustment) - 2 backgauge fingers, laterally adjustable by hand (Z1, Z2) - Ram drive via 2 servomotors and belt drive - Working speed steplessly adjustable - Operation via electric foot switch and/or two-hand control panel - 13 clamping holders for the upper tool (UKB system, type 50.571, UKB System A) - Tool holder for lower tool, 55 mm wide with 13 mm groove, 21 mm groove depth (Trumpf system or UKB System B) - Supplied without bending tools (a new set from UKB costs approx. 3,600 EUR net) - Displayed total operating hours = 8,120 h - Number of working strokes: 1,049,789 strokes Space requirements (L x W x H): 3450 x 1850 x 2650 mm Weight: 5,000 kg Ppedpfx Absxpqy Dsfsw Good condition

Condition: used, CNC Press Brake BEYELER - BYSTRONIC Type PR 8 (2500 kN x 3100 mm) Press brake with 6-axis backgauge and CYBELEC control Serial No.: Year of manufacture: 2001 Pressing force: 250 tons Working length: 3100 mm Stroke: 365 mm Throat depth: 410 mm Clearance between side frames: 2750 mm Table width: 100 mm, 200 mm with table extension Table height above floor: 840 mm Backgauge X-axis: 620 mm travel Pjdpfjya Iaqox Abfepw Backgauge R-axis: 240 mm Approach speed: 200 mm/s Working speed: 1-10 mm/s Y rapid traverse: 200 mm/s Y working traverse: 1-10 mm/s Y return: 135 mm/s Oil capacity: approx. 400 liters Motor power: 18.5 kW Connected load: approx. 25 kW Power supply: 400 Volt, 50 Hz, 50 Amp. - 8 axis CNC control Cybelec DNC 1200 PS/A, X1 + X2 / R1 + R2 / Z1 + Z2 - 2 freely programmable backgauge fingers, laterally movable (Z1+Z2) - Backgauge (X-axis 620 mm) with 3 gauging points up to max. 1080 mm - Ram with servo valves and measuring system Y1 and Y2 - FIESSLER AKAS safety light barrier - Operation via electric foot switch and/or two-hand control panel - Hydraulic upper tool clamping (TRUMPF system) with 20 mm clamping slot - Tool holder for lower tool, height 160 mm x width 60 mm, with holder slot 14 x 23 mm - Tool system TRUMPF, without tools Space requirement (L x W x H): 0 x 2500 x 3400 mm Machine transport height: 3360 mm Weight: 17,000 kg Good condition

Condition: used, CNC Universal Coordinate Drilling and Milling Machine FEHLMANN Type PICOMAX 100-CNC 3 CNC Control HEIDENHAIN TNC 155 Manufacturer's No. 16186651 Year of Manufacture 1986 Spindle Taper FEHLMANN SF32 Drilling Capacity Ø 30 mm in steel Thread Cutting up to M20 in steel Travel X: 850 mm, Y: 435 mm Quill Stroke Z: 210 mm Vertical Movement of Milling Head 580 mm Feed X and Y 1 to 8000 mm/min. Feed Z 1 to 4000 mm/min. Rapid Traverse X and Y 8 m/min. Pedpfx Aohik Ezsbfepw Rapid Traverse Z 4 m/min. Table Clamping Surface 1570 x 500 mm Distance Spindle Nose - Table 130 - 720 mm Overhang Spindle - Column 450 mm Spindle Speed 50 - 7100 RPM, stepless Spindle Drive 10 kW Total Connected Load 20 kW Mains Connection 400 Volt, 50 Hz - CNC Control HEIDENHAIN TNC 155 with TFT monitor - 3 axes controlled, X, Y and Z quill adjustment - hydro-mechanical tool clamping FEHLMANN SF32 - threading device - cable remote control for machine operation and axis movements - motorized vertical movement of the milling head with shutdown via adjustable cams - 3D probe RENISHAW, Type MP 11F with FEHLMANN SF32 mount - 20 tool holders FEHLMANN SF32 - swiveling tool holder with 21 tool positions - coolant system in the machine frame - control cabinet fixed to the machine - documentation: operating manual, control manual and electrical diagrams Space Required L x W x H 2350 x 2000 x 2300 mm Weight 3.2 tons very good condition

Condition: as good as new (ex-display), Year of construction: 2022, pressing force: 400 t, Press design double column press Thermally neutral 80 - 120 °C Number of operating sides 1 side Forces Pressing force max. 4000 kN Free ripping force max. 400 kN Pressure build-up time Closed die steel to steel Max. 4 sec. Dimensions 3,800 mm long and 4,475 mm wide Max. Opening width 800 mm Stroke 800 mm Table height above floor 1100 mm Height above floor (headroom) approx. 4300 mm Hall height min. 5500 mm parallel deviation at 20°C +/- 0,1 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.2 mm/m Podpfeph Uk Nsx Abfjpw Weight Total weight of press without operating materials and table plate approx. 28 t Press table Table size 1500x1500 mm Speeds Fast closing with 100 mm sec. Pressing speed 8 - 3 mm sec. Sound pressure Sound pressure level, measured at 1.5m height at the control panel according to DIN 45635-T16-KL3 max. 78 db(A) Hydraulics Number of pressing cylinders/driving cylinders 1 pc. Operating pressure max. 300 bar Pressing pressure build-up time 4 sec. Pressure accuracy during pressing stroke +/- 3 bar Main pump BOSCHREXROTH axial piston pump approx. 145 L/min Oil volume approx. HLP 46 MW 1000 liters Ambient temperature max. 40 °C Oil temperature max. 55 °C Flow temperature °C Auxiliary pump BOSCHREXROTH, gear pump 10 L/min Pressure stabilization for up to 300 sec. Electrical system Main supply 400 V AC Control voltage 24 V DC Frequency 50 Hz Connection hydraulics main motor 40 kW Sliding table press with 400 T capacity, Closing speed up to 100 mm/ ( adjustable via touch screen ) Opening speed up to 100 mm/sec ( adjustable via touch screen ) Starting press speed 10 mm/sec ( adjustable via touch screen ) table top size 1500x1500mm ram size approx. 1600x1500mm Oil temperature monitoring 55 degree warning, 60 degree shutdown Automatic lubrication ( adjustable via touch screen ) Free positioning of the ram ( adjustable via touch screen ) SICK/PILZ light barriers 14 mm, front, up to 1800 mm height Hydraulic and mechanical ram protection Circuit oil cooling ( adjustable via touch screen ) Ejector in table, 20 T press force, 350mm travel Ejector moves outwards with the table Table plate milled flat, with DIN 22 T grooves Pressure adjustment from 60 T to 400 T ( adjustable via touch screen ) Travel limitation either by pressure or position Set-up mode, single stroke and cycle sequence ( adjustable via touch screen ) Swiveling control panel on the cabinet Two-hand operation, with opening button, manual/single stroke/cycle switchover button Installation, commissioning, instruction against separate charge The control is supplied by SIEMENS. ( S 7 1200 ) Also the touch screen monitor with 9 inch. The remote maintenance unit SECOMEA -Ethernet is included in the delivery. The side of the press has two 1000 mm high and 800 mm wide windows with double doors. (sliding table press, hydraulic press, hydraulic press, double column press)

Condition: new, Year of construction: 2022, pressing force: 15 t, Single column press with 15 T capacity Ppjdpjitylgsfx Abfsw suitable for continuous shift operation a) travel speed 10 mm/sec. downwards, b) opening speed up to 25 mm/sec c) starting pressing speed 10 mm/sec d) table size 400x400 mm e) ram size 200x200 mm, with T grooves and central cylinder clamping f) Overall size approx. 1150x800x1750 mm g) oil temperature display on oil tank h) pressure adjustment from 5 T to 17 T ( adjustable by rotary control ) i) Hand lever operation with two speeds j) Machine body powder-coated, or double-painted k) Control cabinet supply line from above with 3000 mm cable and 16 Ampere plug l) assembly, commissioning, instruction against separate calculation Press design Single column press Thermally neutral 80 - 120 °C Number of operating sides 1 side Forces Press force max. ( at 250 bar ) 150 kN Free ripping force max. 10 kN Pressure build-up time Closed die Steel to steel Max. 2 sec. Max. Opening width 400 mm Stroke and min. opening 350 mm Table height above floor 850 mm Height above floor (headroom) approx. 1900 mm Hall height min. 2.500 mm Parallel deviation at 20°C +/- 0.1 mm Determined at max. clamping force with 70% occupancy < = 0.3 mm/m Weight Total weight of the press without operating materials approx. 1.1 to Fast closing with 10 mm sec. Press speed 10 - 0 mm sec. Sound pressure level, measured at 1.5m height at the control panel according to DIN 45635-T16-KL3 max. 78 db(A) Number of pressing cylinders 1 pc. Operating pressure max. 290 bar Pressing pressure build-up time . 2 sec. Pressure accuracy during pressing stroke +/- 5 bar Main pump Gear pump approx. 9 L/min Oil volume approx. HLP 46 MW 80 liters Ambient temperature max. 40 °C Oil temperature max. 55 °C Flow temperature °C Electrical system 400 V AC Main supply Control voltage 24 V DC Hydraulic pumps 24 V DC Frequency 50 Hz Hydraulic connection Main motor 3 kW Total connection Approx. 5 kW Equipment control cabinet Protection class IP 54 Reserve space Approx. 20 Cooling no Interior lighting no Operating mode switch Lockable yes

Condition: used, Bending tool, die, lower knife, lower tool, lower beam, -Tool: for folding machine Pedpfx Ascn Rd Rsbfspw -Widening: for lower cheek -Dimensions: 33/76/3040 mm -Bore distance: 280 mm -Hole diameter: 18 mm -Length: 3040 mm -Weight: 33 kg

Condition: good (used), Pressing pliers, pressing machine, pressing jaws, pressing tool -Manufacturer: Roller, press machine type 5788001 with accessories -Pressing pliers: size M15, M18, M22, M28 -Accessories: see photos -Dimensions case: 510/300/H120 mm Psdpfxevmha Te Abfjpw -Weight: 11.7 kg

Condition: used, Bending tool, die, upper knife, upper tool, upper beam Psdpfxscn Shrj Abfopw -Tool: for folding machine -Dimensions: 60 x 15 mm -Length: 1020 mm -Weight: 6 kg

Condition: new, Wood briquetting press Amis ABP 60 L -Exhibition machine- ----- Technical data ----- Briquette Ø: 60 mm, Hydraulic unit 3 kW: 140 bar, Voltage: 400 V, frequency: 50 Hz, Fuse protection: 16 A, Capacity approx.: 20-35 kg/h, Weight approx.: 300 kg - Easy handling - Hydraulic control - Briquette diameter 60 mm - Briquette length adjustable as required (max. 60 mm) - Motor equipped with motor protection switch and emergency stop - No electronic components such as regulators, sensors and sensors or complicated controls - Large storage container - Tempered briquette tongs - Replaceable press bar - Pressing without the addition of additives - Thanks to the pre-compressor, even Ppodpfxou R Sxxj Abfow voluminous chips can also be processed - No adjustment work or pressure monitoring of the pressure necessary - New exhibition machine -

Condition: used, Year of construction: 1981, machine/vehicle number: 9, Anpapp-Presse und Falzeinbrennmaschine Schmedt PräForm HHS 20 Case Press and Joint-Setting machine Schmedt PräForm HHS 20 Baujahr / Year 02/1981 - Serial-Nr. 09 Buchhöhe / Book height: 100 - 520mm Buchbreite / Block width: 120 - 400mm Blockstärke / Block tickness:: 8 - 100mm Leistung / Output: ca. 150 St/h Pressluftanschluss / Air supply: 6bar Elektrischer Anschluss / Power supply: 230V / 50Hz / 2.0kW Ppodpfjrmul Dex Abfew Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 2000, machine/vehicle number: 124, Falzeinbrenn- und Abpressmaschine - Book press and joint-setting machine Zechini CIMATICYear 2000 - Serial-No. 124/00 Ppodpfsh Ayanox Abfow Buch Format max. Buchhöhe 48cm x Buchbreite 35cm x Buchblockstärke 9cm Book Size max. height 48cm x width 35cm x thickness 9cm Leistung max 150 in St./h / Output 150 pcs/h Pressluftanschluss 6 bar / Air pressure supply 6 bar Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Casing-In / Bucheinhängemaschine - Buchformpresse / Book Forming Press Kolbus EMP - FE Year 1966 Block size min. 125 x 100 x 6mm / max. 370 x 270 x 80mm Ppjdpfxsvuaqyj Abfjw Case size min. 125 x 210mm / max. 370 x 62 mm Speed up to 36 cycles per minute Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Die PräForm ist eine Maschine zum Einpressen von Büchern nach dem Einhängen und dem gleichzeitigem Einbrennen des Falzes. The PräForm is a machine to press books after casing-in, setting the joint at the same time and processes single books just as well as series of books.  Anpapp-Presse und Falzeinbrennmaschine Schmedt PräForm HHS 2100 Case Press and Joint-Setting machine Schmedt PräForm HHS 2100 Baujahr / Year Serial-Nr. 77 Buchhöhe / Book height: 100 - 520mm Buchbreite / Block width: 120 - 400mm Blockstärke / Block tickness:: 8 - 100mm Leistung / Output: ca. 150 St/h Pressluftanschluss / Air supply: 6bar Elektrischer Anschluss / Power supply: 230V / 50Hz / 2.0kW Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test Ppedjxgi Hqjpfx Abfjw

Condition: excellent (used), Here, we offer a TOX pressing machine, specifically the TOX-C bracket press. TOX Pressotechnik pressing machine, TOX-C bracket press. Pneumohydraulic manual workstation with process monitoring for pressing in functional elements. Technical data: Press type: EMB 030.068.Α.001 Drive: KWE3O.0O.17O.10H Pneumatic connection: G3/4'' Compressed air treatment: Filtered and dried compressed air, max. particle size 40 µm Air pressure during working process: Pmin. = 3.0 bar, Pmax. = 6.0 bar Pressing force: 170 kN Total stroke / return stroke: 170 mm / 10 mm Control: STE 326-366-3/4"-90-230V/AC special, complete Electrical connection: 90-230V/AC Ambient temperature during operation: Tmin. = 10°C, Tmax. = 60°C TOX pressing monitoring: EPW 500FP, force/travel measurement Holding device: ZHE for TOX press Dimensions: Width 1917.5 mm, Height 2506 mm, Depth 1917.5 mm Protective grid system: Leuze B20/B21 light curtain Pressing tool: See (pictures 15 to 18) Pressing sleeve (picture 17): 24.5 ∅ mm Application area, use: Pressing Weight: 2200 kg Type: EMB 030.068.A.001 Condition: used Psdpfszd Rhksx Abfspw Scope of delivery: (See picture) (Changes and errors in the technical data and specifications are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: used, Year of construction: 2021, Oil Application Machine LW100.6/300 Two-Roller Machine – Roller width: 300 mm, material passage up to 80 mm. Oil application on top and bottom. Adjustable feed speed approx. 6–35 m/min. Motor 0.37 kW, 400 Volt, 50 Hz. CE certificate. Machine table working height 900 mm, powder-coated. Additional safety hood with adjustable pass-through thickness, with plexiglass insert. Non-driven roller conveyor 1300 mm, working height 900 mm, height adjustable. Storage location: Nattheim. Pedpfsxy Tmujx Abfepw